In order to be able to start the adsp listener for audiopd using adsprpcd,
we need to add the corresponding ioctl for creating a static process.
On that ioctl call we need to allocate the heap. Allocating the heap needs
to be happening only once and needs to be kept between different device
open calls, so attach it to the channel context to make sure that remains
until the RPMSG driver is removed. Then, if there are any VMIDs associated
with the static ADSP process, do a call to SCM to assign it.
And then, send all the necessary info related to heap to the DSP.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-8-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the lookup of the munmap request to the fastrpc_req_munmap and pass
on only the buf to the lower level fastrpc_req_munmap_impl. That way
we can use the lower level fastrpc_req_munmap_impl on error path in
fastrpc_req_mmap to free the buf without searching for the munmap
request it belongs to.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-7-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the kref_init right after the allocation so that we can use
fastrpc_map_put on any following error case.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-6-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Split fastrpc_buf_alloc in such a way it allows allocation of remote
heap too and add fastrpc_remote_heap_alloc to do so.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-5-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The reserved mem support is needed for CMA heap support, which will be
used by AUDIOPD.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-4-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The AUDIO_PD will be done via static pd, so the proper name here is
actually ROOT_PD.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-3-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The fastrpc components on the SM8550 SoC can require up to 3 IOMMU
entries, this bumps the maxItems to 3 for this purpose.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221125071405.148786-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, feature and cleanup for 6.2 (take2)

We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes.  Now it is just used to
protect device mode transitions (typically to and from buffered capture).

Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).

Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.

New device support
* adi,ad4310
  - New driver to support this very flexible measurement device including
    a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
  - Add support of the ADXL359 accelerometer.
* adi,ltc2983
  - Support additional variants of the temperatures sensor:
    LTC2984 with an EEPROM
    LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
  - Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
  - New driver for this 3 axis accelerometer.
* maxim,max11401
  - New driver to support this 24-bit 10 channel ADC.
    Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
  - Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
  - Add support for LSM6DSV accelerometer and gyroscope. Simple additional
    of chip specific data and IDs.
  - Add support for LSM6DSV16X accelerometer and gyroscope.  Compatible with
    features currently implemented for the LSM6DSV.
* st,stm32-adc
  - Add support for stm32pm13x SoCs.

core / subsystem wide:
 - Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
   allow for the wrapping of attributes in the code that duplicates them
   for multiple buffers.
 - Harden against future issues with expectation that all buffer attributes
   are iio_dev_attrs by changing the code to take an array of pointers
   of the correct type.
 - Last transitions of drivers to local locks rather than missuses of mlock.
 - Add an iio_device_claim_buffer_mode() callback to avoid a race in the
   max30100 driver without directly using mlock.
 - Move mlock to the opaque IIO device structure to prevent misuse.
 - Add missing spi_device_id tables to support auto loading of modules.
 - Update some ADI maintainers in DT bindings.
 - A few more moves of bus drivers and core module sets to export
   name spaces.
 - Extensive use of new devm_regulator_get_enable() and friends.
 - Switch a bunch of i2c drivers to probe_new() including the bmp280
   which makes use of the new i2c_client_get_device_id() helper to
   simplify this change.

dt-bindings:
 - More use of spi-peripheral-props.yaml.

Features
* freescale,mpl115
  - Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
  - More sophisticated runtime power management
  - Provide access to sampling frequency.
  - Trivial follow up fixes.
* microchip,mcp3911
  - Support control of PGA.
* st,lsm6dsx
  - Add support for software triggers for cases where the IRQ lines
    are not wired up.
* vishay,vcnl4000
  - Add control of integration time.

Minor cleanups and fixes
* adi,ad4130
  - Improve ABI documentation formatting.
  - Kconfig dependency fixup.
* adi,ad5758
  - Minor dt binding fix.
* adi,ad9834
  - Tidy up line breaks.
* adi,ade7854
  - Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
  - Harden code against hardware returning wrong values.
* adi,adxl355
  - Warn only if unknown device ID detected to allow for fall back
    device tree compatibles on future devices.
* adi,ltc2983
  - dt-bindings clarifications and general improvements.
  - Ensure DMA safe buffer for bulk writes without relying on current
    regmap implementation choices.
* avago,adps9960
  - Fix up a disconnect between event enable attributes and what was
    enabled.
* bosch,bma400
  - Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
  - Fully devm managed probe() and related tidying up.
* meas,ms5611
  - Add an example of spi-max-frequency.
* meleixs,mlx90632
  - Tidy up confusing error return value.
  - Style improvements.
* multiplexer
  - Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
  - Minor dt binding improvements.
* rockchip,saradc
  - Add ID for rv1126.
* semtech,sx9360
  - Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
    but is in the wild.
* st,lsm6dsx
  - Factor out common code as _device_set_enable().
  - Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
  - Manage the min sampling time on all internal channels.
* trig,sysfs
  - Improve error labels.

* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
  iio: pressure: bmp280: convert to i2c's .probe_new()
  iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
  iio: adc: ad4130: depend on GPIOLIB
  staging: iio: meter: replace ternary operator by if condition
  iio: light: apds9960: Fix iio_event_spec structures
  dt-bindings: iio: imu: Add inv_icm42600 documentation
  iio: imu: inv_icm42600: Add support for icm42631
  dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
  dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
  dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
  iio: imu: st_lsm6dsx: add support to LSM6DSV16X
  iio: proximity: sx9360: Add a new ACPI hardware ID
  iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
  iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
  iio: temperature: ltc2983: support more parts
  dt-bindings: iio: temperature: ltc2983: support more parts
  dt-bindings: iio: temperature: ltc2983: use generic node name in example
  dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
  dt-bindings: iio: temperature: ltc2983: refine descriptions
  dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
  ...

Use i2c_client_get_device_id() to get the i2c_device_id* parameter in the
.new_probe() callback.
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/5dcaa389ea2ffe7050091b07a3bc4b0c1c9d586b.1668361368.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fix sensor ODR description for LSM6DSV/LSM6DSVX

Fixes: a1c6d631 ("iio: imu: st_lsm6dsx: add support to LSM6DSV")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/653e14bf79bb88d8581d2bc42da2f784caaf3776.1668417770.git.lorenzo@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Fixes undefined references to 'gpiochip_get_data' and
'devm_gpiochip_add_data_with_key'.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 62094060 ("iio: adc: ad4130: add AD4130 driver")
Link: https://lore.kernel.org/r/20221114133649.1737027-1-cosmin.tanislav@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Replace ternary operator by simple if based evaluation of the return
value. Issue identified using coccicheck.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Link: https://lore.kernel.org/r/Y3CAdCa17WdWDYUa@qemulionSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is only one interrupt enable option for both ALS low and high
thresholds, and one for both Proximity low and high thresholds.
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@vixtechnology.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20221110101241.10576-1-subhajit.ghosh@vixtechnology.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Update the required documentation for the icm42631.
Signed-off-by: Jay Greco <grecojay@amazon.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20221110192933.13616-3-grecojay@amazon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add the required WHOAMI and device_id definitions to support the
icm42631.
Signed-off-by: Jay Greco <grecojay@amazon.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20221110192933.13616-2-grecojay@amazon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add saradc compatible string for rockchip rv1126.

Cc: linux-iio@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221108041400.157052-4-jagan@edgeble.aiSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

'contains' applies to arrays, but 'adi,dc-dc-mode' is a scalar. So drop
'contains' from the 'if' schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221111212846.4104059-1-robh@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add device bindings for lsm6dsv16x IMU sensor.
Use lsm6dsv as fallback device for lsm6dsv16x since it implements all the
features currently supported by lsm6dsv16x.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/8d10a63ec6abd22863ab25addd8c2f578dbc9cd9.1667745215.git.lorenzo@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support to STM LSM6DSV16X (accelerometer and gyroscope) Mems sensor.
The LSM6DSV16X sensor can use LSM6DSV as fallback device since it
implements all the LSM6DSV16X features currently implemented in
st_lsm6dsx.

Datasheet: https://www.st.com/resource/en/datasheet/lsm6dsv16x.pdfSigned-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/284b251f861dff30c399e5736a843c8e3a497249.1667745215.git.lorenzo@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

From
https://treexy.com/products/driver-fusion/database/sensors/semtech/sx9360-proximity/

sx9360 SAR sensor can be presented with ACPI ID SAMM0208.

Whilst this does not appear to be an official ACPI ID, it is in the wild
(perhaps due to a typo on the SAM PnP ID).
Reported-by: Jordi Torres <majosamaso@gmail.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20221105225157.10081-1-gwendal@chromium.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Only used within this file, so should be marked static.

Fixes: 2aebc223 ("iio: temperature: mlx90632 Add runtime powermanagement modes")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/20221105125108.383193-3-jic23@kernel.org

This call can fail so handling is necessary even if it is very unlikely.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527134 ("Error handling issues")
Fixes: 2aebc223 ("iio: temperature: mlx90632 Add runtime powermanagement modes")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/20221105125108.383193-2-jic23@kernel.org

Add support for the following parts:
 * LTC2984
 * LTC2986
 * LTM2985

The LTC2984 is a variant of the LTC2983 with EEPROM.
The LTC2986 is a variant of the LTC2983 with only 10 channels,
EEPROM and support for active analog temperature sensors.
The LTM2985 is software-compatible with the LTC2986.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221103130041.2153295-14-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for the following parts:
 * LTC2984
 * LTC2986
 * LTM2985

The LTC2984 is a variant of the LTC2983 with EEPROM.
The LTC2986 is a variant of the LTC2983 with only 10 channels,
EEPROM and support for active analog temperature sensors.
The LTM2985 is software-compatible with the LTC2986.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-13-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Examples should use the generic IIO node name of temperature-sensor.
Fix it.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221103130041.2153295-12-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The 'adi,mux-delay-config-us' property is broken. It was supposed to
be in us, but the value is actually written directly to the register.
Describe the fact that it is broken and how it actually works.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-11-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Some descriptions are too verbose, while others are too succint.
Rewrite them all.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-10-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Excitation cannot be set to auto-range when using a custom thermistor
or Steinhart sensor type. Default it to 1000nA to match the driver
and remove the auto-range value from the enum.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-9-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The driver will error out when current rotation is enabled but the RTD
is not 4-wire. Require it in the binding too.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-8-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The driver will error out when a custom sensor type is used but a
custom sensor table is not provided. Require it in the binding too.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-7-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Give a little bit of information on what each item in the matrix is
supposed to be.

Also, some matrices put the 'minItems' and 'maxItems' keywords in the
wrong level. They should be on the same level as the 'items' keyword.
Fix it.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-6-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Not needed, so why have them?
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-5-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Addresses should be in hex, fix it.

Although the driver initially specified 1-20, it can be made free-range
since the address is supposed to match reg, onto which we can impose
restrictions based on the compatible property value.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-4-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Binding properties should have default values to let the reader
know if they should change it. Add them based on driver logic.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-3-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

regmap_bulk_write() does not guarantee implicit DMA-safety,
even though the current implementation duplicates the given
buffer. Do not rely on it.

Fixes: f110f318 ("iio: temperature: Add support for LTC2983")
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221103130041.2153295-2-demonsingur@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Sphinx reports two warnings on sysfs documentation for AD4130 driver:

Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Block quote ends without a blank line; unexpected unindent.

These are due to misformatting of sinc* modes list. Format it with bullet
list. Since each entry spans multiple lines, separate each with a blank
line.

Fixes: 62094060 ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20221106140233.74112-1-bagasdotme@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for ADXL359 device in already existing ADXL355 driver.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl359.pdfSigned-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Link: https://lore.kernel.org/r/20221031105129.47740-4-ramona.bolboaca@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Update ADXL355 existing documentation with documentation
for ADXL359 device.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221031105129.47740-3-ramona.bolboaca@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use warning instead of failing driver probe if invalid device id is
detected for ADXL355 device.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Link: https://lore.kernel.org/r/20221031105129.47740-2-ramona.bolboaca@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>