- 04 Nov, 2022 6 commits
-
-
Andrew Davis authored
Although usually integrated as a child of an Ethernet controller, MDIO IP has an independent pinout. This pinout should be controlled by the MDIO node (so if it was to be disabled for instance, the pinmux state would reflect that). Move the MDIO pins pinmux to the MIDO nodes. Signed-off-by:
Andrew Davis <afd@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Tested-by:
Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by:
Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20221028142417.10642-7-afd@ti.com
-
Andrew Davis authored
ECAP nodes defined in the top-level AM65x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. (These and the EPWM nodes could be used to trigger internal actions but they are not used like that currently) As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the ECAP nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
EPWM nodes defined in the top-level AM65x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the EPWM nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
SPI nodes defined in the top-level AM65x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the SPI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
I2C nodes defined in the top-level AM65x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the I2C nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
UART nodes defined in the top-level AM65x SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the UART nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
- 03 Nov, 2022 1 commit
-
-
Matt Ranostay authored
Avoid the following warnings from dt-schema by just renaming the clock-names string from adc_tsc_fck to fck so it matches the values in ti,am3359-tscadc.yaml tscadc@40200000: clock-names:0: 'fck' was expected Signed-off-by:
Matt Ranostay <mranostay@ti.com> Signed-off-by:
Judith Mendez <jm@ti.com> Reviewed-by:
Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20221024151648.394623-1-mranostay@ti.com
-
- 28 Oct, 2022 32 commits
-
-
Andrew Davis authored
I2C nodes defined in the top-level J721s2 SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the I2C nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
MCAN nodes defined in the top-level J721s2 SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the MCAN nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
Mailbox nodes defined in the top-level J721s2 SoC dtsi files are incomplete and may not be functional unless they are extended with a chosen interrupt and connection to a remote processor. As the remote processors depend on memory nodes which are only known at the board integration level, these nodes should only be enabled when provided with the above information. Disable the Mailbox nodes in the dtsi files and only enable the ones that are actually used on a given board. Signed-off-by:
-
Andrew Davis authored
Mailbox nodes defined in the top-level J7200 SoC dtsi files are incomplete and may not be functional unless they are extended with a chosen interrupt and connection to a remote processor. As the remote processors depend on memory nodes which are only known at the board integration level, these nodes should only be enabled when provided with the above information. Disable the Mailbox nodes in the dtsi files and only enable the ones that are actually used on a given board. Signed-off-by:
-
Andrew Davis authored
Mailbox nodes defined in the top-level J721e SoC dtsi files are incomplete and may not be functional unless they are extended with a chosen interrupt and connection to a remote processor. As the remote processors depend on memory nodes which are only known at the board integration level, these nodes should only be enabled when provided with the above information. Disable the Mailbox nodes in the dtsi files and only enable the ones that are actually used on a given board. Signed-off-by:
-
Andrew Davis authored
UART nodes defined in the top-level J721s2 SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the UART nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
I2C nodes defined in the top-level J7200 SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the I2C nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
UART nodes defined in the top-level J7200 SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the UART nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
MCAN nodes defined in the top-level J721e SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the MCAN nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
MCASP nodes defined in the top-level J721e SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the MCASP nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
I2C nodes defined in the top-level J721e SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the I2C nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
UART nodes defined in the top-level J721e SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the UART nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
OSPI nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the OSPI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
SDHCI nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the SDHCI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
MCAN nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the MCAN nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
MDIO nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with a pinmux. As the attached PHY is only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the MDIO nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
Although usually integrated as a child of an Ethernet controller, MDIO IP has an independent pinout. This pinout should be controlled by the MDIO node (so if it was to be disabled for instance, the pinmux state would reflect that). Move the MDIO pins pinmux to the MIDO nodes. Signed-off-by:
-
Andrew Davis authored
ECAP nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. (These and the EPWM nodes could be used to trigger internal actions but they are not used like that currently) As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the ECAP nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
EPWM nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the EPWM nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
SPI nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the SPI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
I2C nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the I2C nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
UART nodes defined in the top-level AM62x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the UART nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
The GPMC node defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless it is extended with pinmux information. As the pinmux is only known at the board integration level, this node should only be enabled when provided with this information. Disable the GPMC node in the dtsi file. Since the ELM is made to work with the GPMC, disable it too. Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20221017192532.23825-11-afd@ti.com
-
Andrew Davis authored
MCAN nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the MCAN nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
MDIO nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with a pinmux. As the attached PHY is only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the MDIO nodes (in both CPSW and ICSSG) in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
Although usually integrated as a child of an Ethernet controller, MDIO IP has an independent pinout. This pinout should be controlled by the MDIO node (so if it was to be disabled for instance, the pinmux state would reflect that). Move the MDIO pins pinmux to the MIDO nodes. Signed-off-by:
-
Andrew Davis authored
PCIe nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with a SerDes PHY. And usually only one of the two modes can be used at a time as they share a SerDes link. As the PHY and mode is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the PCIe nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
ECAP nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. (These and the EPWM nodes could be used to trigger internal actions but they are not used like that currently) As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the ECAP nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
EPWM nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the EPWM nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
SPI nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the SPI nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
I2C nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the I2C nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
Andrew Davis authored
UART nodes defined in the top-level AM64x SoC dtsi files are incomplete and will not be functional unless they are extended with pinmux information. As the pinmux is only known at the board integration level, these nodes should only be enabled when provided with this information. Disable the UART nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by:
-
- 16 Oct, 2022 1 commit
-
-
Linus Torvalds authored
-
