Sky2 is parsing the VPD and adds the parsed information to its debugfs
file. This isn't needed in kernel, userspace tools like lspci can be
used to display such information nicely. Therefore remove this from
the driver.

lspci -vv:

Capabilities: [50] Vital Product Data
	Product Name: Marvell Yukon 88E8070 Gigabit Ethernet Controller
	Read-only fields:
		[PN] Part number: Yukon 88E8070
		[EC] Engineering changes: Rev. 1.0
		[MN] Manufacture ID: Marvell
		[SN] Serial number: AbCdEfG970FD4
		[CP] Extended capability: 01 10 cc 03
		[RV] Reserved: checksum good, 9 byte(s) reserved
	Read/write fields:
		[RW] Read-write area: 1 byte(s) free
	End

Relevant part in debugfs file:

0000:01:00.0 Product Data
Marvell Yukon 88E8070 Gigabit Ethernet Controller
 Part Number: Yukon 88E8070
 Engineering Level: Rev. 1.0
 Manufacturer: Marvell
 Serial Number: AbCdEfG970FD4
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/bbaee8ab-9b2e-de04-ee7b-571e094cc5fe@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-09-17

We've added 63 non-merge commits during the last 12 day(s) which contain
a total of 65 files changed, 2653 insertions(+), 751 deletions(-).

The main changes are:

1) Streamline internal BPF program sections handling and
   bpf_program__set_attach_target() in libbpf, from Andrii.

2) Add support for new btf kind BTF_KIND_TAG, from Yonghong.

3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song.

4) IMUL optimization for x86-64 JIT, from Jie.

5) xsk selftest improvements, from Magnus.

6) Introduce legacy kprobe events support in libbpf, from Rafael.

7) Access hw timestamp through BPF's __sk_buff, from Vadim.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits)
  selftests/bpf: Fix a few compiler warnings
  libbpf: Constify all high-level program attach APIs
  libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7
  selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API
  libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target()
  libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs
  selftests/bpf: Stop using relaxed_core_relocs which has no effect
  libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id()
  bpf: Update bpf_get_smp_processor_id() documentation
  libbpf: Add sphinx code documentation comments
  selftests/bpf: Skip btf_tag test if btf_tag attribute not supported
  docs/bpf: Add documentation for BTF_KIND_TAG
  selftests/bpf: Add a test with a bpf program with btf_tag attributes
  selftests/bpf: Test BTF_KIND_TAG for deduplication
  selftests/bpf: Add BTF_KIND_TAG unit tests
  selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format
  selftests/bpf: Test libbpf API function btf__add_tag()
  bpftool: Add support for BTF_KIND_TAG
  libbpf: Add support for BTF_KIND_TAG
  libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag
  ...
====================

Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

72165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
create a new macro and set of functions for this different process type.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210917181551.2836036-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Clang warns twice:

drivers/ptp/ptp_ocp.c:2065:16: error: operator '?:' has lower precedence
than '&'; '&' will be evaluated first
[-Werror,-Wbitwise-conditional-parentheses]
                           on & map ? " ON" : "OFF", src);
                           ~~~~~~~~ ^
drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '&'
expression to silence this warning
                           on & map ? " ON" : "OFF", src);
                                    ^
                           (       )
drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '?:'
expression to evaluate it first
                           on & map ? " ON" : "OFF", src);
                                    ^

on and map are both booleans so this should be a logical AND, which
clears up the operator precedence issue.

Fixes: a62a56d0 ("ptp: ocp: Enable 4th timestamper / PPS generator")
Link: https://github.com/ClangBuiltLinux/linux/issues/1457Suggested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20210917045204.1385801-1-nathan@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With clang building selftests/bpf, I hit a few warnings like below:

  .../bpf_iter.c:592:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
  __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
                                                ^

  .../bpf_iter.c:688:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable]
  __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0;
                                                ^

  .../tc_redirect.c:657:6: warning: variable 'target_fd' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
  if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD))
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  .../tc_redirect.c:743:6: note: uninitialized use occurs here
  if (target_fd >= 0)
      ^~~~~~~~~

Removing unused variables and initializing the previously-uninitialized variable
to ensure these warnings are gone.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210917043343.3711917-1-yhs@fb.com

Andrii Nakryiko says:

====================

This patch set deprecates bpf_object_open_opts.attach_prog_fd (in libbpf 0.7+)
by extending bpf_program__set_attach_target() to support some more flexible
scenarios. Existing fexit_bpf2bpf selftest is updated accordingly to not use
deprecated APIs.

While at it, also deprecate no-op relaxed_core_relocs option (they are always
"relaxed").

Last patch also const-ifies all high-level libbpf attach APIs, as there is no
reason for them to assume bpf_program/bpf_map modifications.

Patch #1 also removes one more unneeded use of find_sec_def(), relying on
prog->sec_def that's set during bpf_object__open() operation, simplifying
upcoming refactoring a little bit more.

All these changes are preparatory patches before SEC() handling refactoring
that will come next.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Attach APIs shouldn't need to modify bpf_program/bpf_map structs, so
change all struct bpf_program and struct bpf_map pointers to const
pointers. This is completely backwards compatible with no functional
change.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-8-andrii@kernel.org

bpf_object_open_opts.attach_prog_fd makes a pretty strong assumption
that bpf_object contains either only single freplace BPF program or all
of BPF programs in BPF object are freplaces intended to replace
different subprograms of the same target BPF program. This seems both
a bit confusing, too assuming, and limiting.

We've had bpf_program__set_attach_target() API which allows more
fine-grained control over this, on a per-program level. As such, mark
open_opts.attach_prog_fd as deprecated starting from v0.7, so that we
have one more universal way of setting freplace targets. With previous
change to allow NULL attach_func_name argument, and especially combined
with BPF skeleton, arguable bpf_program__set_attach_target() is a more
convenient and explicit API as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-7-andrii@kernel.org

Switch fexit_bpf2bpf selftest to bpf_program__set_attach_target()
instead of using bpf_object_open_opts.attach_prog_fd, which is going to
be deprecated. These changes also demonstrate the new mode of
set_attach_target() in which it allows NULL when the target is BPF
program (attach_prog_fd != 0).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-6-andrii@kernel.org

Allow to use bpf_program__set_attach_target to only set target attach
program FD, while letting libbpf to use target attach function name from
SEC() definition. This might be useful for some scenarios where
bpf_object contains multiple related freplace BPF programs intended to
replace different sub-programs in target BPF program. In such case all
programs will have the same attach_prog_fd, but different
attach_func_name. It's convenient to specify such target function names
declaratively in SEC() definitions, but attach_prog_fd is a dynamic
runtime setting.

To simplify such scenario, allow bpf_program__set_attach_target() to
delay BTF ID resolution till the BPF program load time by providing NULL
attach_func_name. In that case the behavior will be similar to using
bpf_object_open_opts.attach_prog_fd (which is marked deprecated since
v0.7), but has the benefit of allowing more control by user in what is
attached to what. Such setup allows having BPF programs attached to
different target attach_prog_fd with target functions still declaratively
recorded in BPF source code in SEC() definitions.

Selftests changes in the next patch should make this more obvious.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-5-andrii@kernel.org

It's relevant and hasn't been doing anything for a long while now.
Deprecated it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-4-andrii@kernel.org

relaxed_core_relocs option hasn't had any effect for a while now, stop
specifying it. Next patch marks it as deprecated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-3-andrii@kernel.org

Don't perform another search for sec_def inside
libbpf_find_attach_btf_id(), as each recognized bpf_program already has
prog->sec_def set.

Also remove unnecessary NULL check for prog->sec_name, as it can never
be NULL.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210916015836.1248906-2-andrii@kernel.org

The MODULE_DEVICE_TABLE already creates proper alias for spi driver.
Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Devlink core exported generously the functions calls that were used
by netdevsim tests or not used at all.

Delete such APIs with one exception - devlink_alloc_ns(). That function
should be spared from deleting because it is a special form of devlink_alloc()
needed for the netdevsim.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable blkaddr is being initialized with a value that is never
read, it is being updated later on in a for-loop. The assignment is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case where the condition !is_rvu_otx2(rvu) is false variable
val is not initialized and can contain a garbage value. Fix this by
initializing val to zero and bit-wise or'ing in BIT_ULL(51) to val
for the true condition case of !is_rvu_otx2(rvu).

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 4b5a3ab1 ("octeontx2-af: Hardware configuration for inline IPsec")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After I turn on the CONFIG_LOCK_STAT=y, insmod e1000e.ko will report:
[    5.641579] e1000e: Unknown symbol mutex_lock (err -2)
[   90.775705] e1000e: Unknown symbol mutex_lock (err -2)
[  132.252339] e1000e: Unknown symbol mutex_lock (err -2)

This problem fixed after include <linux/mutex.h>.
Signed-off-by: Hao Chen <chenhaoa@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable the DAC early wake when then link operates at 10BaseT allows
power savings in the hundreds of milli Watts by shutting down the
transmitter. A number of errata have been issued for various Gigabit
PHYs and the recommendation is to enable both the early and forced DAC
wake to be on the safe side. This needs to be done dynamically based
upon the link state, which is why a link_change_notify callback is
utilized.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210916212742.1653088-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rafał Miłecki says:

====================
net: dsa: b53: Clean up CPU/IMP ports

This has been tested on:

1. Luxul XBR-4500 with used CPU port 5
[    8.361438] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0

2. Netgear R8000 with used CPU port 8
[    4.453858] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5

====================

Link: https://lore.kernel.org/r/20210916120354.20338-1-zajec5@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It's set but never used anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

According to the Broadcom's reference driver flow control needs to be
enabled for any CPU switch port (5, 7 or 8 - depending on which one is
used). Current code makes it work only for the port 5. Use
dsa_is_cpu_port() which solved that problem.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On BCM5301x port 8 requires a fixed link when used.

Years ago when b53 was an OpenWrt downstream driver (with configuration
based on sometimes bugged NVRAM) there was a need for a fixup. In case
of forcing fixed link for (incorrectly specified) port 5 the code had to
actually setup port 8 link.

For upstream b53 driver with setup based on DT there is no need for that
workaround. In DT we have and require correct ports setup.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make "enabled_ports" bitfield contain all available switch ports
including a CPU port. This way there is no need for fixup during
initialization.

For BCM53010, BCM53018 and BCM53019 include also other available ports.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts!
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf.

  Current release - regressions:

   - vhost_net: fix OoB on sendmsg() failure

   - mlx5: bridge, fix uninitialized variable usage

   - bnxt_en: fix error recovery regression

  Current release - new code bugs:

   - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset()

  Previous releases - regressions:

   - r6040: restore MDIO clock frequency after MAC reset

   - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()

   - dsa: flush switchdev workqueue before tearing down CPU/DSA ports

  Previous releases - always broken:

   - ptp: dp83640: don't define PAGE0, avoid compiler warning

   - igc: fix tunnel segmentation offloads

   - phylink: update SFP selected interface on advertising changes

   - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume

   - mlx5e: fix mutual exclusion between CQE compression and HW TS

  Misc:

   - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode

   - sfc: fallback for lack of xdp tx queues

   - hns3: add option to turn off page pool feature"

* tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
  mlxbf_gige: clear valid_polarity upon open
  igc: fix tunnel offloading
  net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert
  net: wan: wanxl: define CROSS_COMPILE_M68K
  selftests: nci: replace unsigned int with int
  net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports
  Revert "net: phy: Uniform PHY driver access"
  net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup
  ptp: dp83640: don't define PAGE0
  bnx2x: Fix enabling network interfaces without VFs
  Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers""
  tcp: fix tp->undo_retrans accounting in tcp_sacktag_one()
  net-caif: avoid user-triggerable WARN_ON(1)
  bpf, selftests: Add test case for mixed cgroup v1/v2
  bpf, selftests: Add cgroup v1 net_cls classid helpers
  bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode
  bpf: Add oversize check before call kvcalloc()
  net: hns3: fix the timing issue of VF clearing interrupt sources
  net: hns3: fix the exception when query imp info
  net: hns3: disable mac in flr process
  ...

tx timeout and slot time are currently specified in units of HZ.  On
Alpha, HZ is defined as 1024.  When building alpha:allmodconfig, this
results in the following error message.

  drivers/net/hamradio/6pack.c: In function 'sixpack_open':
  drivers/net/hamradio/6pack.c:71:41: error:
  	unsigned conversion from 'int' to 'unsigned char'
  	changes value from '256' to '0'

In the 6PACK protocol, tx timeout is specified in units of 10 ms and
transmitted over the wire:

    https://www.linux-ax25.org/wiki/6PACK

Defining a value dependent on HZ doesn't really make sense, and
presumably comes from the (very historical) situation where HZ was
originally 100.

Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity:

        mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);

and the SIXP_TXDELAY walue is sent as a byte over the wire.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the new static annotation, the compiler warns when the functions
are actually unused:

   drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function]
    1123 | static int cdn_dp_resume(struct device *dev)
         |            ^~~~~~~~~~~~~

Mark them __maybe_unused to suppress that warning as well.

[ Not so 'new' static annotations any more, and I removed the part of
  the patch that added __maybe_unused to cdn_dp_suspend(), because it's
  used by the shutdown/remove code.

  So only the resume function ends up possibly unused if CONFIG_PM isn't
  set     - Linus ]

Fixes: 7c49abb4 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm:allmodconfig fails to build with the following error.

  drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error:
					unused variable 'cur_cluster'

Remove the unused variable.

Fixes: bb8c26d9 ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some drivers pass a pointer to volatile data to virt_to_bus() and
virt_to_phys(), and that works fine.  One exception is alpha.  This
results in a number of compile errors such as

  drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset':
  drivers/net/wan/lmc/lmc_main.c:1782:50: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

  drivers/atm/ambassador.c: In function 'do_loader_command':
  drivers/atm/ambassador.c:1747:58: error:
	passing argument 1 of 'virt_to_bus' discards 'volatile'
	qualifier from pointer target type

Declare the parameter of virt_to_phys and virt_to_bus as pointer to
volatile to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This driver isn't enabled most places because of the ISA config
dependency, but alpha still has it.  And I think the 'Jensen' actually
did have an ISA slot.

However, it doesn't build cleanly, because the "Vortex bus master" code
just casts the skb->data pointer to 'int':

        outl((int) (skb->data), ioaddr + Wn7_MasterAddr);

which is all kinds of broken.  Even on a good old traditional PC/AT it
would be broken because the high bits will be random kernel address
bits, but presumably the hardware ignores those bits.  I mean, it's ISA.
We're talking 16MB dma limits. The "good old days".

Make the build happy with this kind of craziness by using the proper
isa_virt_to_bus() handling that the full bus master code uses anyway
(the Vortex bus mastering is a limited special case).

Who knows, this might even work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull parisc fix from Helge Deller:
 "Fix a build warning when using the PAGE0 pointer"

* tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use absolute_pointer() to define PAGE0

Pull m68k fixes from Geert Uytterhoeven:

 - Warning fixes to mitigate CONFIG_WERROR=y

* tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: mvme: Remove overdue #warnings in RTC handling
  m68k: Double cast io functions to unsigned long

On OcteonTX2/CN10K SoC, the admin function (AF) is the only one
with all priviliges to configure HW and alloc resources, PFs and
it's VFs have to request AF via mailbox for all their needs.
This patch adds new mailbox messages for CPT PFs and VFs to configure
HW resources for inline-IPsec.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RFC8998 specification defines the use of the ShangMi algorithm
cipher suites in TLS 1.3, and also supports the GCM/CCM mode using
the SM4 algorithm.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The devlink parameters are not the right mechanism to pass
extra parameters to device flashing. The params added are
also undocumented.

This reverts commit 13bb8429 ("net: wwan: iosm: firmware
flashing and coredump collection").
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The network interface managed by the mlxbf_gige driver can
get into a problem state where traffic does not flow.
In this state, the interface will be up and enabled, but
will stop processing received packets.  This problem state
will happen if three specific conditions occur:
    1) driver has received more than (N * RxRingSize) packets but
       less than (N+1 * RxRingSize) packets, where N is an odd number
       Note: the command "ethtool -g <interface>" will display the
       current receive ring size, which currently defaults to 128
    2) the driver's interface was disabled via "ifconfig oob_net0 down"
       during the window described in #1.
    3) the driver's interface is re-enabled via "ifconfig oob_net0 up"

This patch ensures that the driver's "valid_polarity" field is
cleared during the open() method so that it always matches the
receive polarity used by hardware.  Without this fix, the driver
needs to be unloaded and reloaded to correct this problem state.

Fixes: f92e1869 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CN10K MAC block (RPM) differs in number of stats compared to Octeontx2
MAC block (CGX). RPM supports stats for each class of PFC and error
packets etc. It would be difficult for user to read stats from ethtool
and map to their definition.

New debugfs file is already added to read RPM stats along with their
definition. This patch adds proper checks such that RPM stats will not
be part of ethtool.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>