- 11 Oct, 2023 5 commits
-
-
Kory Maincent authored
A bitset without mask in a _SET request means we want exactly the bits in the bitset to be set. This works correctly for compact format but when verbose format is parsed, ethnl_update_bitset32_verbose() only sets the bits present in the request bitset but does not clear the rest. The commit 66991703 fixes this issue by clearing the whole target bitmap before we start iterating. The solution proposed brought an issue with the behavior of the mod variable. As the bitset is always cleared the old val will always differ to the new val. Fix it by adding a new temporary variable which save the state of the old bitmap. Fixes: 66991703 ("ethtool: fix application of verbose no_mask bitset") Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231009133645.44503-1-kory.maincent@bootlin.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-10-09 Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state detection and wait behavior. John Watts contributes a patch to only show the sun4i_can Kconfig option on ARCH_SUNXI. A patch by Miquel Raynal fixes the soft-reset workaround for Renesas SoCs in the sja1000 driver. Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver fixes the id2 register for the tcan4553. 2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC. * tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: Fix id2_register for tcan4553 can: flexcan: remove the auto stop mode for IMX93 can: sja1000: Always restart the Tx queue after an overrun arm64: dts: imx93: add the Flex-CAN stop mode by GPR can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior ==================== Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.deSigned-off-by:
-
Eric Dumazet authored
Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF. Getting a reference on the socket found in a lookup while holding a lock should happen before releasing the lock. nfc_llcp_sock_get_sn() has a similar problem. Finally nfc_llcp_recv_snl() needs to make sure the socket found by nfc_llcp_sock_from_sn() does not disappear. Fixes: 8f50020e ("NFC: LLCP late binding") Reported-by:
Sili Luo <rootlab@huawei.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231009123110.3735515-1-edumazet@google.comSigned-off-by:
-
Jeremy Kerr authored
Our current route lookups (mctp_route_lookup and mctp_route_lookup_null) traverse the net's route list without the RCU read lock held. This means the route lookup is subject to preemption, resulting in an potential grace period expiry, and so an eventual kfree() while we still have the route pointer. Add the proper read-side critical section locks around the route lookups, preventing premption and a possible parallel kfree. The remaining net->mctp.routes accesses are already under a rcu_read_lock, or protected by the RTNL for updates. Based on an analysis from Sili Luo <rootlab@huawei.com>, where introducing a delay in the route lookup could cause a UAF on simultaneous sendmsg() and route deletion. Reported-by:
Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by:
-
Randy Dunlap authored
Correct punctuation and drop an extraneous word. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
- 10 Oct, 2023 9 commits
-
-
Will Mortensen authored
Commit 1e662209 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") seems to have accidentally inverted the logic added in commit 0bc73ad4 ("net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp"). The impact of this is a little unclear since it seems the FCS scattered with RX-FCS is (usually?) correct regardless. Fixes: 1e662209 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") Tested-by:
Charlotte Tan <charlotte@extrahop.com> Reviewed-by:
Will Mortensen <will@extrahop.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Gerd Bayer authored
When the SMC protocol is built into the kernel proper while ISM is configured to be built as module, linking the kernel fails due to unresolved dependencies out of net/smc/smc_ism.o to ism_get_smcd_ops, ism_register_client, and ism_unregister_client as reported via the linux-next test automation (see link). This however is a bug introduced a while ago. Correct the dependency list in ISM's and SMC's Kconfig to reflect the dependencies that are actually inverted. With this you cannot build a kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y', too - or a 'n'. That way, SMC can still be configured on non-s390 architectures that do not have (nor need) an ISM driver. Fixes: 89e7d2ba ("net/ism: Add new API for client registration") Reported-by:
Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by:
Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by:
-
Dan Carpenter authored
The adapter->vf_mvs.l list needs to be initialized even if the list is empty. Otherwise it will lead to crashes. Fixes: a1cbb15c ("ixgbe: Add macvlan support for VF") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadamSigned-off-by:
-
Paolo Abeni authored
Radu Pirea says: ==================== Add update_pn flag Patches extracted from https://lore.kernel.org/all/20230928084430.1882670-1-radu-nicolae.pirea@oss.nxp.com/ Update_pn flag will let the offloaded MACsec implementations to know when the PN is updated. ==================== Link: https://lore.kernel.org/r/20231005180636.672791-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by:
-
Radu Pirea (NXP OSS) authored
When updating the SA, use the new update_pn flags instead of comparing the new PN with the initial one. Comparing the initial PN value with the new value will allow the user to update the SA using the initial PN value as a parameter like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 off Fixes: 8ff0ac5b ("net/mlx5: Add MACsec offload Tx command support") Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support") Signed-off-by:
Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Radu Pirea (NXP OSS) authored
Updating the PN is not supported. Return -EINVAL if update_pn is true. The following command succeeded, but it should fail because the driver does not update the PN: ip macsec set macsec0 tx sa 0 pn 232 on Fixes: 28c5107a ("net: phy: mscc: macsec support") Signed-off-by:
-
Radu Pirea (NXP OSS) authored
When updating SA, update the PN only when the update_pn flag is true. Otherwise, the PN will be reset to its previous value using the following command and this should not happen: $ ip macsec set macsec0 tx sa 0 on Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Radu Pirea (NXP OSS) authored
Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by:
-
Eric Dumazet authored
syzbot uses panic_on_warn. This means that the skb_dump() I added in the blamed commit are not even called. Rewrite this so that we get the needed skb dump before syzbot crashes. Fixes: eeee4b77 ("net: add more debug info in skb_checksum_help()") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
- 08 Oct, 2023 3 commits
-
-
Michal Swiatkowski authored
When one of the LAG interfaces is in switchdev mode, setting default rule can't be done. The interface on which switchdev is running has ice_set_rx_mode() blocked to avoid default rule adding (and other rules). The other interfaces (without switchdev running but connected via bond with interface that runs switchdev) can't follow the same scheme, because rx filtering needs to be disabled when failover happens. Notification for bridge to set promisc mode seems like good place to do that. Fixes: bb52f42a ("ice: Add driver support for firmware changes for LAG") Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roger Pau Monne authored
Do not set netback interfaces (vifs) default TX queue size to the ring size. The TX queue size is not related to the ring size, and using the ring size (32) as the queue size can lead to packet drops. Note the TX side of the vif interface in the netback domain is the one receiving packets to be injected to the guest. Do not explicitly set the TX queue length to any value when creating the interface, and instead use the system default. Note that the queue length can also be adjusted at runtime. Fixes: f942dc25 ('xen network backend driver') Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Dan Carpenter authored
The mlxsw_sp2_nve_vxlan_learning_set() function is supposed to return zero on success or negative error codes. So it needs to be type int instead of bool. Fixes: 4ee70efa ("mlxsw: spectrum_nve: Add support for VXLAN on Spectrum-2") Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
- 06 Oct, 2023 19 commits
-
-
Jakub Kicinski authored
Yoshihiro Shimoda says: ==================== ravb: Fix use-after-free issues This patch series fixes use-after-free issues in ravb_remove(). The original patch is made by Zheng Wang [1]. And, I made the patch 1/2 which I found other issue in the ravb_remove(). [1] https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/ v1: https://lore.kernel.org/all/20231004091253.4194205-1-yoshihiro.shimoda.uh@renesas.com/ ==================== Link: https://lore.kernel.org/r/20231005011201.14368-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop(). Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reported-by:
Zheng Wang <zyytlz.wz@163.com> Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231005011201.14368-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
In ravb_remove(), dma_free_coherent() should be call after unregister_netdev(). Otherwise, this controller is possible to use the freed buffer. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
-
Moshe Shemesh authored
Devlink health dump get callback should take devlink lock as any other devlink callback. Otherwise, since devlink_mutex was removed, this callback is not protected from a race of the reporter being destroyed while handling the callback. Add devlink lock to the callback and to any call for devlink_health_do_dump(). This should be safe as non of the drivers dump callback implementation takes devlink lock. As devlink lock is added to any callback of dump, the reporter dump_lock is now redundant and can be removed. Fixes: d3efc2a6 ("net: devlink: remove devlink_mutex") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
Marc Kleine-Budde authored
Adopt FlexCAN stop mode to new A1 revision of imx93 SoCs. Link: https://lore.kernel.org/all/20230726112458.3524165-1-haibo.chen@nxp.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Markus Schneider-Pargmann authored
Fix id2_register content for tcan4553. This slipped through my testing. Reported-by:
Sean Anderson <sean.anderson@seco.com> Closes: https://lore.kernel.org/lkml/a94e6fc8-4f08-7877-2ba0-29b9c2780136@seco.com/ Fixes: 142c6dc6 ("can: tcan4x5x: Add support for tcan4552/4553") Signed-off-by:
Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by:
-
Haibo Chen authored
IMX93 A0 chip involve the internal q-channel handshake in LPCG and CCM to automatically handle the Flex-CAN IPG STOP signal. Only after FLEX-CAN enter stop mode then can support the self-wakeup feature. But meet issue when do the continue system PM stress test. When config the CAN as wakeup source, the first time after system suspend, any data on CAN bus can wakeup the system, this is as expect. But the second time when system suspend, data on CAN bus can't wakeup the system. If continue this test, we find in odd time system enter suspend, CAN can wakeup the system, but in even number system enter suspend, CAN can't wakeup the system. IC find a bug in the auto stop mode logic, and can't fix it easily. So for the new imx93 A1, IC drop the auto stop mode and involve the GPR to support stop mode (used before). IC define a bit in GPR which can trigger the IPG STOP signal to Flex-CAN, let it go into stop mode. And NXP claim to drop IMX93 A0, and only support IMX93 A1. So this patch remove the auto stop mode, and add flag FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR to imx93. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/all/20230726112458.3524165-2-haibo.chen@nxp.comSigned-off-by:
-
Miquel Raynal authored
Upstream commit 717c6ec2 ("can: sja1000: Prevent overrun stalls with a soft reset on Renesas SoCs") fixes an issue with Renesas own SJA1000 CAN controller reception: the Rx buffer is only 5 messages long, so when the bus loaded (eg. a message every 50us), overrun may easily happen. Upon an overrun situation, due to a possible internal crosstalk situation, the controller enters a frozen state which only can be unlocked with a soft reset (experimentally). The solution was to offload a call to sja1000_start() in a threaded handler. This needs to happen in process context as this operation requires to sleep. sja1000_start() basically enters "reset mode", performs a proper software reset and returns back into "normal mode". Since this fix was introduced, we no longer observe any stalls in reception. However it was sporadically observed that the transmit path would now freeze. Further investigation blamed the fix mentioned above, and especially the reset operation. Reproducing the reset in a loop helped identifying what could possibly go wrong. The sja1000 is a single Tx queue device, which leverages the netdev helpers to process one Tx message at a time. The logic is: the queue is stopped, the message sent to the transceiver, once properly transmitted the controller sets a status bit which triggers an interrupt, in the interrupt handler the transmission status is checked and the queue woken up. Unfortunately, if an overrun happens, we might perform the soft reset precisely between the transmission of the buffer to the transceiver and the advent of the transmission status bit. We would then stop the transmission operation without re-enabling the queue, leading to all further transmissions to be ignored. The reset interrupt can only happen while the device is "open", and after a reset we anyway want to resume normal operations, no matter if a packet to transmit got dropped in the process, so we shall wake up the queue. Restarting the device and waking-up the queue is exactly what sja1000_set_mode(CAN_MODE_START) does. In order to be consistent about the queue state, we must acquire a lock both in the reset handler and in the transmit path to ensure serialization of both operations. It turns out, a lock is already held when entering the transmit path, so we can just acquire/release it as well with the regular net helpers inside the threaded interrupt handler and this way we should be safe. As the reset handler might still be called after the transmission of a frame to the transceiver but before it actually gets transmitted, we must ensure we don't leak the skb, so we free it (the behavior is consistent, no matter if there was an skb on the stack or not). Fixes: 717c6ec2 ("can: sja1000: Prevent overrun stalls with a soft reset on Renesas SoCs") Cc: stable@vger.kernel.org Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/all/20231002160206.190953-1-miquel.raynal@bootlin.com [mkl: fixed call to can_free_echo_skb()] Signed-off-by:
-
Haibo Chen authored
imx93 A0 chip use the internal q-channel handshake signal in LPCG and CCM to automatically handle the Flex-CAN stop mode. But this method meet issue when do the system PM stress test. IC can't fix it easily. So in the new imx93 A1 chip, IC drop this method, and involve back the old way，use the GPR method to trigger the Flex-CAN stop mode signal. Now NXP claim to drop imx93 A0, and only support imx93 A1. So here add the stop mode through GPR. This patch also fix a typo for aonmix_ns_gpr. Signed-off-by:
-
John Watts authored
When adding the RISCV option I didn't gate it behind ARCH_SUNXI. As a result this option shows up with Allwinner support isn't enabled. Fix that by requiring ARCH_SUNXI to be set if RISCV is set. Fixes: 8abb9525 ("can: sun4i_can: Add support for the Allwinner D1") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/linux-sunxi/CAMuHMdV2m54UAH0X2dG7stEg=grFihrdsz4+o7=_DpBMhjTbkw@mail.gmail.com/Signed-off-by:
John Watts <contact@jookia.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/all/20230905231342.2042759-2-contact@jookia.orgSigned-off-by:
-
Lukas Magel authored
With patch [1], isotp_poll was updated to also queue the poller in the so->wait queue, which is used for send state changes. Since the queue now also contains polling tasks that are not interested in sending, the queue fill state can no longer be used as an indication of send readiness. As a consequence, nonblocking writes can lead to a race and lock-up of the socket if there is a second task polling the socket in parallel. With this patch, isotp_sendmsg does not consult wq_has_sleepers but instead tries to atomically set so->tx.state and waits on so->wait if it is unable to do so. This behavior is in alignment with isotp_poll, which also checks so->tx.state to determine send readiness. V2: - Revert direct exit to goto err_event_drop [1] https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.czReported-by:
Maxime Jayat <maxime.jayat@mobile-devices.fr> Closes: https://lore.kernel.org/linux-can/11328958-453f-447f-9af8-3b5824dfb041@munic.io/Signed-off-by:
Lukas Magel <lukas.magel@posteo.net> Reviewed-by:
Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 79e19fa7 ("can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events") Link: https://github.com/pylessard/python-udsoncan/issues/178#issuecomment-1743786590 Link: https://lore.kernel.org/all/20230827092205.7908-1-lukas.magel@posteo.netSigned-off-by:
-
Gustavo A. R. Silva authored
commit d61491a5 ("net/sched: cls_u32: Replace one-element array with flexible-array member") incorrecly replaced an instance of `sizeof(*tp_c)` with `struct_size(tp_c, hlist->ht, 1)`. This results in a an over-allocation of 8 bytes. This change is wrong because `hlist` in `struct tc_u_common` is a pointer: net/sched/cls_u32.c: struct tc_u_common { struct tc_u_hnode __rcu *hlist; void *ptr; int refcnt; struct idr handle_idr; struct hlist_node hnode; long knodes; }; So, the use of `struct_size()` makes no sense: we don't need to allocate any extra space for a flexible-array member. `sizeof(*tp_c)` is just fine. So, `struct_size(tp_c, hlist->ht, 1)` translates to: sizeof(*tp_c) + sizeof(tp_c->hlist->ht) == sizeof(struct tc_u_common) + sizeof(struct tc_u_knode *) == 144 + 8 == 0x98 (byes) ^^^ | unnecessary extra allocation size $ pahole -C tc_u_common net/sched/cls_u32.o struct tc_u_common { struct tc_u_hnode * hlist; /* 0 8 */ void * ptr; /* 8 8 */ int refcnt; /* 16 4 */ /* XXX 4 bytes hole, try to pack */ struct idr handle_idr; /* 24 96 */ /* --- cacheline 1 boundary (64 bytes) was 56 bytes ago --- */ struct hlist_node hnode; /* 120 16 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ long int knodes; /* 136 8 */ /* size: 144, cachelines: 3, members: 6 */ /* sum members: 140, holes: 1, sum holes: 4 */ /* last cacheline: 16 bytes */ }; And with `sizeof(*tp_c)`, we have: sizeof(*tp_c) == sizeof(struct tc_u_common) == 144 == 0x90 (bytes) which is the correct and original allocation size. Fix this issue by replacing `struct_size(tp_c, hlist->ht, 1)` with `sizeof(*tp_c)`, and avoid allocating 8 too many bytes. The following difference in binary output is expected and reflects the desired change: | net/sched/cls_u32.o | @@ -6148,7 +6148,7 @@ | include/linux/slab.h:599 | 2cf5: mov 0x0(%rip),%rdi # 2cfc <u32_init+0xfc> | 2cf8: R_X86_64_PC32 kmalloc_caches+0xc |- 2cfc: mov $0x98,%edx |+ 2cfc: mov $0x90,%edx Reported-by:
Alejandro Colomar <alx@kernel.org> Closes: https://lore.kernel.org/lkml/09b4a2ce-da74-3a19-6961-67883f634d98@kernel.org/Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
Marek Behún says: ==================== net: dsa: qca8k: fix qca8k driver for Turris 1.x this is v2 of https://lore.kernel.org/netdev/20231002104612.21898-1-kabel@kernel.org/ Changes since v1: - fixed a typo in commit message noticed by Simon Horman ==================== Signed-off-by:
-
Marek Behún authored
Besides the QCA8337 switch the Turris 1.x device has on it's MDIO bus also Micron ethernet PHY (dedicated to the WAN port). We've been experiencing a strange behavior of the WAN ethernet interface, wherein the WAN PHY started timing out the MDIO accesses, for example when the interface was brought down and then back up. Bisecting led to commit 2cd54856 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet"), which added support to access the QCA8337 switch's internal PHYs via management ethernet frames. Connecting the MDIO bus pins onto an oscilloscope, I was able to see that the MDIO bus was active whenever a request to read/write an internal PHY register was done via an management ethernet frame. My theory is that when the switch core always communicates with the internal PHYs via the MDIO bus, even when externally we request the access via ethernet. This MDIO bus is the same one via which the switch and internal PHYs are accessible to the board, and the board may have other devices connected on this bus. An ASCII illustration may give more insight: +---------+ +----| | | | WAN PHY | | +--| | | | +---------+ | | | | +----------------------------------+ | | | QCA8337 | MDC | | | +-------+ | ------o-+--|--------o------------o--| | | MDIO | | | | | PHY 1 |-|--to RJ45 --------o--|---o----+---------o--+--| | | | | | | | +-------+ | | +-------------+ | o--| | | | | MDIO MDC | | | | PHY 2 |-|--to RJ45 eth1 | | | o--+--| | | -----------|-|port0 | | | +-------+ | | | | | o--| | | | | switch core | | | | PHY 3 |-|--to RJ45 | +-------------+ o--+--| | | | | | +-------+ | | | o--| ... | | +----------------------------------+ When we send a request to read an internal PHY register via an ethernet management frame via eth1, the switch core receives the ethernet frame on port 0 and then communicates with the internal PHY via MDIO. At this time, other potential devices, such as the WAN PHY on Turris 1.x, cannot use the MDIO bus, since it may cause a bus conflict. Fix this issue by locking the MDIO bus even when we are accessing the PHY registers via ethernet management frames. Fixes: 2cd54856 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Marek Behún authored
Commit c766e077 ("net: dsa: qca8k: convert to regmap read/write API") introduced bulk read/write methods to qca8k's regmap. The regmap bulk read/write methods get the register address in a buffer passed as a void pointer parameter (the same buffer contains also the read/written values). The register address occupies only as many bytes as it requires at the beginning of this buffer. For example if the .reg_bits member in regmap_config is 16 (as is the case for this driver), the register address occupies only the first 2 bytes in this buffer, so it can be cast to u16. But the original commit implementing these bulk read/write methods cast the buffer to u32: u32 reg = *(u32 *)reg_buf & U16_MAX; taking the first 4 bytes. This works on little endian systems where the first 2 bytes of the buffer correspond to the low 16-bits, but it obviously cannot work on big endian systems. Fix this by casting the beginning of the buffer to u16 as u32 reg = *(u16 *)reg_buf; Fixes: c766e077 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for lynx-28g PHY driver This series fixes some issues in the Lynx 28G SerDes driver, namely an oops when unloading the module, a race between the periodic workqueue and the PHY API, and a race between phy_set_mode_ext() calls on multiple lanes on the same SerDes. ==================== Signed-off-by: -
Vladimir Oltean authored
The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers. Fixes: 8f73b37c ("phy: add support for the Layerscape SerDes 28G") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
lynx_28g_cdr_lock_check() runs once per second in a workqueue to reset the lane receiver if the CDR has not locked onto bit transitions in the RX stream. But the PHY consumer may do stuff with the PHY simultaneously, and that isn't okay. Block concurrent generic PHY calls by holding the PHY mutex from this workqueue. Fixes: 8f73b37c ("phy: add support for the Layerscape SerDes 28G") Signed-off-by:
-
Ioana Ciornei authored
The blamed commit added the CDR check work item but didn't cancel it on the remove path. Fix this by adding a remove function which takes care of it. Fixes: 8f73b37c ("phy: add support for the Layerscape SerDes 28G") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
- 05 Oct, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from Bluetooth, netfilter, BPF and WiFi. I didn't collect precise data but feels like we've got a lot of 6.5 fixes here. WiFi fixes are most user-awaited. Current release - regressions: - Bluetooth: fix hci_link_tx_to RCU lock usage Current release - new code bugs: - bpf: mprog: fix maximum program check on mprog attachment - eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns() Previous releases - regressions: - ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling - vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it doesn't handle zero length like we expected - wifi: - cfg80211: fix cqm_config access race, fix crashes with brcmfmac - iwlwifi: mvm: handle PS changes in vif_cfg_changed - mac80211: fix mesh id corruption on 32 bit systems - mt76: mt76x02: fix MT76x0 external LNA gain handling - Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER - l2tp: fix handling of transhdrlen in __ip{,6}_append_data() - dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent - eth: stmmac: fix the incorrect parameter after refactoring Previous releases - always broken: - net: replace calls to sock->ops->connect() with kernel_connect(), prevent address rewrite in kernel_bind(); otherwise BPF hooks may modify arguments, unexpectedly to the caller - tcp: fix delayed ACKs when reads and writes align with MSS - bpf: - verifier: unconditionally reset backtrack_state masks on global func exit - s390: let arch_prepare_bpf_trampoline return program size, fix struct_ops offsets - sockmap: fix accounting of available bytes in presence of PEEKs - sockmap: reject sk_msg egress redirects to non-TCP sockets - ipv4/fib: send netlink notify when delete source address routes - ethtool: plca: fix width of reads when parsing netlink commands - netfilter: nft_payload: rebuild vlan header on h_proto access - Bluetooth: hci_codec: fix leaking memory of local_codecs - eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids - eth: stmmac: - dwmac-stm32: fix resume on STM32 MCU - remove buggy and unneeded stmmac_poll_controller, depend on NAPI - ibmveth: always recompute TCP pseudo-header checksum, fix use of the driver with Open vSwitch - wifi: - rtw88: rtw8723d: fix MAC address offset in EEPROM - mt76: fix lock dependency problem for wed_lock - mwifiex: sanity check data reported by the device - iwlwifi: ensure ack flag is properly cleared - iwlwifi: mvm: fix a memory corruption due to bad pointer arithm - iwlwifi: mvm: fix incorrect usage of scan API Misc: - wifi: mac80211: work around Cisco AP 9115 VHT MPDU length" * tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) MAINTAINERS: update Matthieu's email address mptcp: userspace pm allow creating id 0 subflow mptcp: fix delegated action races net: stmmac: remove unneeded stmmac_poll_controller net: lan743x: also select PHYLIB net: ethernet: mediatek: disable irq before schedule napi net: mana: Fix oversized sge0 for GSO packets net: mana: Fix the tso_bytes calculation net: mana: Fix TX CQE error handling netlink: annotate data-races around sk->sk_err sctp: update hb timer immediately after users change hb_interval sctp: update transport state when processing a dupcook packet tcp: fix delayed ACKs for MSS boundary condition tcp: fix quick-ack counting to count actual ACKs of new data page_pool: fix documentation typos tipc: fix a potential deadlock on &tx->lock net: stmmac: dwmac-stm32: fix resume on STM32 MCU ipv4: Set offload_failed flag in fibmatch results netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure netfilter: nf_tables: Deduplicate nft_register_obj audit logs ... -
Linus Torvalds authored
Merge tag 'integrity-v6.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Two additional patches to fix the removal of the deprecated IMA_TRUSTED_KEYRING Kconfig" * tag 'integrity-v6.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: rework CONFIG_IMA dependency block ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/ledsLinus Torvalds authored
Pull LED fix from Lee Jones: "Just the one bug-fix: - Fix regression affecting LED_COLOR_ID_MULTI users" * tag 'leds-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fixes from Lee Jones: "A couple of small fixes: - Potential build failure in CS42L43 - Device Tree bindings clean-up for a superseded patch" * tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector" mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQ
-
