- 24 Apr, 2018 29 commits
-
-
Aaron Ma authored
commit 3064a03b upstream. Follow the change of return type u32 of hid_report_len, fix all the types of variables those get the return value of hid_report_len to u32, and all other code already uses u32. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Piggin authored
commit 3b807033 upstream. The OPAL NVRAM driver does not sleep in case it gets OPAL_BUSY or OPAL_BUSY_EVENT from firmware, which causes large scheduling latencies, and various lockup errors to trigger (again, BMC reboot can cause it). Fix this by converting it to the standard form OPAL_BUSY loop that sleeps. Fixes: 628daa8d ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Depends-on: 34dd25de ("powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nicholas Piggin authored
commit 34dd25de upstream. This is the start of an effort to tidy up and standardise all the delays. Existing loops have a range of delay/sleep periods from 1ms to 20ms, and some have no delay. They all loop forever except rtc, which times out after 10 retries, and that uses 10ms delays. So use 10ms as our standard delay. The OPAL maintainer agrees 10ms is a reasonable starting point. The idea is to use the same recipe everywhere, once this is proven to work then it will be documented as an OPAL API standard. Then both firmware and OS can agree, and if a particular call needs something else, then that can be documented with reasoning. This is not the end-all of this effort, it's just a relatively easy change that fixes some existing high latency delays. There should be provision for standardising timeouts and/or interruptible loops where possible, so non-fatal firmware errors don't cause hangs. Signed-off-by:
-
Nicholas Piggin authored
commit 0bfdf598 upstream. asm/barrier.h is not always included after asm/synch.h, which meant it was missing __SUBARCH_HAS_LWSYNC, so in some files smp_wmb() would be eieio when it should be lwsync. kernel/time/hrtimer.c is one case. __SUBARCH_HAS_LWSYNC is only used in one place, so just fold it in to where it's used. Previously with my small simulator config, 377 instances of eieio in the tree. After this patch there are 55. Fixes: 46d075be ("powerpc: Optimise smp_wmb") Cc: stable@vger.kernel.org # v2.6.29+ Signed-off-by:
-
Nicholas Piggin authored
commit 741de617 upstream. opal_nvram_write currently just assumes success if it encounters an error other than OPAL_BUSY or OPAL_BUSY_EVENT. Have it return -EIO on other errors instead. Fixes: 628daa8d ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Acked-by:
Stewart Smith <stewart@linux.ibm.com> Signed-off-by:
-
Aaron Ma authored
commit ac75a041 upstream. When convert char array with signed int, if the inbuf[x] is negative then upper bits will be set to 1. Fix this by using u8 instead of char. ret_size has to be at least 3, hid_input_report use it after minus 2 bytes. Cc: stable@vger.kernel.org Signed-off-by:
-
Steve French authored
commit 7ea884c7 upstream. Some servers return inode number zero for the root directory, which causes ls to display incorrect data (missing "." and ".."). If the server returns zero for the inode number of the root directory, fake an inode number for it. Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit cabdf83d upstream. Platform device is allocated before adding resources. Make sure to properly cleanup on error case. Cc: <stable@vger.kernel.org> Fixes: f1c7e710 ("usb: dwc3: convert to pcim_enable_device()") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Zhengjun Xing authored
commit 64627388 upstream. USB3 hubs don't support global suspend. USB3 specification 10.10, Enhanced SuperSpeed hubs only support selective suspend and resume, they do not support global suspend/resume where the hub downstream facing ports states are not affected. When system enters hibernation it first enters freeze process where only the root hub enters suspend, usb_port_suspend() is not called for other devices, and suspend status flags are not set for them. Other devices are expected to suspend globally. Some external USB3 hubs will suspend the downstream facing port at global suspend. These devices won't be resumed at thaw as the suspend status flag is not set. A USB3 removable hard disk connected through a USB3 hub that won't resume at thaw will fail to synchronize SCSI cache, return “cmd cmplt err -71” error, and needs a 60 seconds timeout which causing system hang for 60s before the USB host reset the port for the USB3 removable hard disk to recover. Fix this by always calling usb_port_suspend() during freeze for USB3 devices. Signed-off-by:
Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Yavuz, Tuba authored
commit 7fafcfdf upstream. It looks like there is a possibility of a double-free vulnerability on an error path of the f_midi_set_alt function in the f_midi driver. If the path is feasible then free_ep_req gets called twice: req->complete = f_midi_complete; err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC); => ... usb_gadget_giveback_request => f_midi_complete (CALLBACK) (inside f_midi_complete, for various cases of status) free_ep_req(ep, req); // first kfree if (err) { ERROR(midi, "%s: couldn't enqueue request: %d\n", midi->out_ep->name, err); free_ep_req(midi->out_ep, req); // second kfree return err; } The double-free possibility was introduced with commit ad0d1a05 ("usb: gadget: f_midi: fix leak on failed to enqueue out requests"). Found by MOXCAFE tool. Signed-off-by:
Tuba Yavuz <tuba@ece.ufl.edu> Fixes: ad0d1a05 ("usb: gadget: f_midi: fix leak on failed to enqueue out requests") Acked-by:
-
Mika Westerberg authored
commit 13d3047c upstream. Mike Lothian reported that plugging in a USB-C device does not work properly in his Dell Alienware system. This system has an Intel Alpine Ridge Thunderbolt controller providing USB-C functionality. In these systems the USB controller (xHCI) is hotplugged whenever a device is connected to the port using ACPI-based hotplug. The ACPI description of the root port in question is as follows: Device (RP01) { Name (_ADR, 0x001C0000) Device (PXSX) { Name (_ADR, 0x02) Method (_RMV, 0, NotSerialized) { // ... } } Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01) but that seems to be incorrect because device 0 is the upstream port of the Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge itself). When we get ACPI Notify() to the root port resulting from connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0, function 2 which of course always returns 0xffffffff because there is no such function and we never find the device. In Windows this works fine. Now, since we get ACPI Notify() to the root port and not to the PXSX device we should actually start our scan from there as well and not from the non-existent PXSX device. Fix this by checking presence of the slot itself (function 0) if we fail to do that otherwise. While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is the recommended way to read Device and Vendor IDs of devices on PCI buses. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557Reported-by:
Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Hans de Goede authored
commit bbf03861 upstream. Just like many other Samsung models, the 670Z5E needs to use the acpi-video backlight interface rather then the native one for backlight control to work, add a quirk for this. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1557060 Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit f00e7109 upstream. We're supposed to be checking that "val_len" is not too large but instead we check if it is smaller than the max. The only function affected would be regmap_i2c_smbus_i2c_write() in drivers/base/regmap/regmap-i2c.c. Strangely that function has its own limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so it doesn't look like it has ever been able to do anything except return an error. Fixes: c335931e ("regmap: Add raw_write/read checks for max_raw_write/read sizes") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Jason Andryuk authored
commit c2d2e673 upstream. A toolstack may delete the vif frontend and backend xenstore entries while xen-netfront is in the removal code path. In that case, the checks for xenbus_read_driver_state would return XenbusStateUnknown, and xennet_remove would hang indefinitely. This hang prevents system shutdown. xennet_remove must be able to handle XenbusStateUnknown, and netback_changed must also wake up the wake_queue for that state as well. Fixes: 5b5971df ("xen-netfront: remove warning when unloading module") Signed-off-by:
Jason Andryuk <jandryuk@gmail.com> Cc: Eduardo Otubo <otubo@redhat.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Maxime Chevallier authored
commit ce99319a upstream. When SPI transfers can be offloaded using DMA, the SPI core need to build a scatterlist to make sure that the buffer to be transferred is dma-able. This patch fixes the scatterlist entry size computation in the case where the maximum acceptable scatterlist entry supported by the DMA controller is less than PAGE_SIZE, when the buffer is vmalloced. For each entry, the actual size is given by the minimum between the desc_len (which is the max buffer size supported by the DMA controller) and the remaining buffer length until we cross a page boundary. Fixes: 65598c13 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Santiago Esteban authored
commit 9a06757d upstream. The compatible string is incorrect. Add atmel,sama5d3-pinctrl since it's the appropriate compatible string. Remove the atmel,at91rm9200-pinctrl compatible string, this fallback is useless, there are too many changes. Signed-off-by:
Santiago Esteban <Santiago.Esteban@microchip.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: stable@vger.kernel.org #v3.18 Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
commit 6f487075 upstream. The proper name for the property, which assign given device to IOMMU is 'iommus', not 'iommu'. Fix incorrect name and let all GScaler devices to be properly handled when IOMMU support is enabled. Reported-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 6cbfdd73 ("ARM: dts: add sysmmu nodes for exynos5250") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Nicolas Ferre authored
commit e8fd0adf upstream. There are only 19 PIOB pins having primary names PB0-PB18. Not all of them have a 'C' function. So the pinctrl property mask ends up being the same as the other SoC of the at91sam9x5 series. Reported-by:
Marek Sieranski <marek.sieranski@microchip.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
-
Felipe Balbi authored
commit eaa358c7 upstream. Mention that ->complete() should never be called from within usb_ep_queue(). Signed-off-by:
-
Heinrich Schuchardt authored
commit af6f8529 upstream. musb->endpoints[] has array size MUSB_C_NUM_EPS. We must check array bounds before accessing the array and not afterwards. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Vlastimil Babka authored
commit a9f2a846 upstream. cache_reap() is initially scheduled in start_cpu_timer() via schedule_delayed_work_on(). But then the next iterations are scheduled via schedule_delayed_work(), i.e. using WORK_CPU_UNBOUND. Thus since commit ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") there is no guarantee the future iterations will run on the originally intended cpu, although it's still preferred. I was able to demonstrate this with /sys/module/workqueue/parameters/debug_force_rr_cpu. IIUC, it may also happen due to migrating timers in nohz context. As a result, some cpu's would be calling cache_reap() more frequently and others never. This patch uses schedule_delayed_work_on() with the current cpu when scheduling the next iteration. Link: http://lkml.kernel.org/r/20180411070007.32225-1-vbabka@suse.cz Fixes: ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Biggers authored
commit 3f05317d upstream. syzbot reported a use-after-free of shm_file_data(file)->file->f_op in shm_get_unmapped_area(), called via sys_remap_file_pages(). Unfortunately it couldn't generate a reproducer, but I found a bug which I think caused it. When remap_file_pages() is passed a full System V shared memory segment, the memory is first unmapped, then a new map is created using the ->vm_file. Between these steps, the shm ID can be removed and reused for a new shm segment. But, shm_mmap() only checks whether the ID is currently valid before calling the underlying file's ->mmap(); it doesn't check whether it was reused. Thus it can use the wrong underlying file, one that was already freed. Fix this by making the "outer" shm file (the one that gets put in ->vm_file) hold a reference to the real shm file, and by making __shm_open() require that the file associated with the shm ID matches the one associated with the "outer" file. Taking the reference to the real shm file is needed to fully solve the problem, since otherwise sfd->file could point to a freed file, which then could be reallocated for the reused shm ID, causing the wrong shm segment to be mapped (and without the required permission checks). Commit 1ac0b6de ("ipc/shm: handle removed segments gracefully in shm_mmap()") almost fixed this bug, but it didn't go far enough because it didn't consider the case where the shm ID is reused. The following program usually reproduces this bug: #include <stdlib.h> #include <sys/shm.h> #include <sys/syscall.h> #include <unistd.h> int main() { int is_parent = (fork() != 0); srand(getpid()); for (;;) { int id = shmget(0xF00F, 4096, IPC_CREAT|0700); if (is_parent) { void *addr = shmat(id, NULL, 0); usleep(rand() % 50); while (!syscall(__NR_remap_file_pages, addr, 4096, 0, 0, 0)); } else { usleep(rand() % 50); shmctl(id, IPC_RMID, NULL); } } } It causes the following NULL pointer dereference due to a 'struct file' being used while it's being freed. (I couldn't actually get a KASAN use-after-free splat like in the syzbot report. But I think it's possible with this bug; it would just take a more extraordinary race...) BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 9 PID: 258 Comm: syz_ipc Not tainted 4.16.0-05140-gf8cf2f16 #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 RIP: 0010:d_inode include/linux/dcache.h:519 [inline] RIP: 0010:touch_atime+0x25/0xd0 fs/inode.c:1724 [...] Call Trace: file_accessed include/linux/fs.h:2063 [inline] shmem_mmap+0x25/0x40 mm/shmem.c:2149 call_mmap include/linux/fs.h:1789 [inline] shm_mmap+0x34/0x80 ipc/shm.c:465 call_mmap include/linux/fs.h:1789 [inline] mmap_region+0x309/0x5b0 mm/mmap.c:1712 do_mmap+0x294/0x4a0 mm/mmap.c:1483 do_mmap_pgoff include/linux/mm.h:2235 [inline] SYSC_remap_file_pages mm/mmap.c:2853 [inline] SyS_remap_file_pages+0x232/0x310 mm/mmap.c:2769 do_syscall_64+0x64/0x1a0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ebiggers@google.com: add comment] Link: http://lkml.kernel.org/r/20180410192850.235835-1-ebiggers3@gmail.com Link: http://lkml.kernel.org/r/20180409043039.28915-1-ebiggers3@gmail.com Reported-by: syzbot+d11f321e7f1923157eac80aa990b446596f46439@syzkaller.appspotmail.com Fixes: c8d78c18 ("mm: replace remap_file_pages() syscall with emulation") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 60bb83b8 upstream. We've got a bug report indicating a kernel panic at booting on an x86-32 system, and it turned out to be the invalid PCI resource assigned after reallocation. __find_resource() first aligns the resource start address and resets the end address with start+size-1 accordingly, then checks whether it's contained. Here the end address may overflow the integer, although resource_contains() still returns true because the function validates only start and end address. So this ends up with returning an invalid resource (start > end). There was already an attempt to cover such a problem in the commit 47ea91b4 ("Resource: fix wrong resource window calculation"), but this case is an overseen one. This patch adds the validity check of the newly calculated resource for avoiding the integer overflow problem. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739 Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de Fixes: 23c570a6 ("resource: ability to resize an allocated resource") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reported-by:
Michael Henders <hendersm@shaw.ca> Tested-by:
-
Andrew Morton authored
commit 9ad553ab upstream. One use of the reiserfs_warning() macro in journal_init_dev() is missing a parameter, causing the following warning: REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev: This also causes a WARN_ONCE() warning in the vsprintf code, and then a panic if panic_on_warn is set. Please remove unsupported %/ in format string WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138 Kernel panic - not syncing: panic_on_warn set ... Just add another string argument to the macro invocation. Addresses https://syzkaller.appspot.com/bug?id=0627d4551fdc39bf1ef5d82cd9eef587047f7718 Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com> Tested-by:
Jeff Mahoney <jeffm@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Richard Weinberger authored
commit b5094b7f upstream. While UBI and UBIFS seem to work at first sight with MLC NAND, you will most likely lose all your data upon a power-cut or due to read/write disturb. In order to protect users from bad surprises, refuse to attach to MLC NAND. Cc: stable@vger.kernel.org Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Boris Brezillon <boris.brezillon@bootlin.com> Acked-by:
Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by:
-
Romain Izard authored
commit 78a8dfba upstream. When opening a device with write access, ubiblock_open returns an error code. Currently, this error code is -EPERM, but this is not the right value. The open function for other block devices returns -EROFS when opening read-only devices with FMODE_WRITE set. When used with dm-verity, the veritysetup userspace tool is expecting EROFS, and refuses to use the ubiblock device. Use -EROFS for ubiblock as well. As a result, veritysetup accepts the ubiblock device as valid. Cc: stable@vger.kernel.org Fixes: 9d54c8a3 (UBI: R/O block driver on top of UBI volumes) Signed-off-by:
Romain Izard <romain.izard.pro@gmail.com> Signed-off-by:
-
Richard Weinberger authored
commit 29b7a6fa upstream. At this point UBI volumes have already been free()'ed and fastmap can no longer access these data structures. Reported-by:
Martin Townsend <mtownsend1973@gmail.com> Fixes: 74cdaf24 ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
commit aac17948 upstream. If ubifs_wbuf_sync() fails we must not write a master node with the dirty marker cleared. Otherwise it is possible that in case of an IO error while syncing we mark the filesystem as clean and UBIFS refuses to recover upon next mount. Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Tejun Heo authored
commit 28b0f8a6 upstream. A tty is hung up by __tty_hangup() setting file->f_op to hung_up_tty_fops, which is skipped on ttys whose write operation isn't tty_write(). This means that, for example, /dev/console whose write op is redirected_tty_write() is never actually marked hung up. Because n_tty_read() uses the hung up status to decide whether to abort the waiting readers, the lack of hung-up marking can lead to the following scenario. 1. A session contains two processes. The leader and its child. The child ignores SIGHUP. 2. The leader exits and starts disassociating from the controlling terminal (/dev/console). 3. __tty_hangup() skips setting f_op to hung_up_tty_fops. 4. SIGHUP is delivered and ignored. 5. tty_ldisc_hangup() is invoked. It wakes up the waits which should clear the read lockers of tty->ldisc_sem. 6. The reader wakes up but because tty_hung_up_p() is false, it doesn't abort and goes back to sleep while read-holding tty->ldisc_sem. 7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup() and is now stuck in D sleep indefinitely waiting for tty->ldisc_sem. The following is Alan's explanation on why some ttys aren't hung up. http://lkml.kernel.org/r/20171101170908.6ad08580@alans-desktop 1. It broke the serial consoles because they would hang up and close down the hardware. With tty_port that *should* be fixable properly for any cases remaining. 2. The console layer was (and still is) completely broken and doens't refcount properly. So if you turn on console hangups it breaks (as indeed does freeing consoles and half a dozen other things). As neither can be fixed quickly, this patch works around the problem by introducing a new flag, TTY_HUPPING, which is used solely to tell n_tty_read() that hang-up is in progress for the console and the readers should be aborted regardless of the hung-up status of the device. The following is a sample hung task warning caused by this issue. INFO: task agetty:2662 blocked for more than 120 seconds. Not tainted 4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 0 2662 1 0x00000086 Call Trace: __schedule+0x267/0x890 schedule+0x36/0x80 schedule_timeout+0x23c/0x2e0 ldsem_down_write+0xce/0x1f6 tty_ldisc_lock+0x16/0x30 tty_ldisc_hangup+0xb3/0x1b0 __tty_hangup+0x300/0x410 disassociate_ctty+0x6c/0x290 do_exit+0x7ef/0xb00 do_group_exit+0x3f/0xa0 get_signal+0x1b3/0x5d0 do_signal+0x28/0x660 exit_to_usermode_loop+0x46/0x86 do_syscall_64+0x9c/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 The following is the repro. Run "$PROG /dev/console". The parent process hangs in D state. #include <sys/types.h> #include <sys/stat.h> #include <sys/wait.h> #include <sys/ioctl.h> #include <fcntl.h> #include <unistd.h> #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <signal.h> #include <time.h> #include <termios.h> int main(int argc, char **argv) { struct sigaction sact = { .sa_handler = SIG_IGN }; struct timespec ts1s = { .tv_sec = 1 }; pid_t pid; int fd; if (argc < 2) { fprintf(stderr, "test-hung-tty /dev/$TTY\n"); return 1; } /* fork a child to ensure that it isn't already the session leader */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { /* top parent, wait for everyone */ while (waitpid(-1, NULL, 0) >= 0) ; if (errno != ECHILD) perror("waitpid"); return 0; } /* new session, start a new session and set the controlling tty */ if (setsid() < 0) { perror("setsid"); return 1; } fd = open(argv[1], O_RDWR); if (fd < 0) { perror("open"); return 1; } if (ioctl(fd, TIOCSCTTY, 1) < 0) { perror("ioctl"); return 1; } /* fork a child, sleep a bit and exit */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { nanosleep(&ts1s, NULL); printf("Session leader exiting\n"); exit(0); } /* * The child ignores SIGHUP and keeps reading from the controlling * tty. Because SIGHUP is ignored, the child doesn't get killed on * parent exit and the bug in n_tty makes the read(2) block the * parent's control terminal hangup attempt. The parent ends up in * D sleep until the child is explicitly killed. */ sigaction(SIGHUP, &sact, NULL); printf("Child reading tty\n"); while (1) { char buf[1024]; if (read(fd, buf, sizeof(buf)) < 0) { perror("read"); return 1; } } return 0; } Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: stable@vger.kernel.org Signed-off-by:
-
- 20 Apr, 2018 11 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit d7ba3c00 which was commit 79e498a9 upstream. Turns out it breaks things, so drop it. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <alexander.levin@microsoft.com> Cc: Dan Rue <dan.rue@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 91b2d344 upstream. The arm64 futex code has some explicit dereferencing of user pointers where performing atomic operations in response to a futex command. This patch uses masking to limit any speculative futex operations to within the user address space. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport] Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 4bfc3380 ] lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit d14d2b78 ] Commit d65026c6 ("vhost: validate log when IOTLB is enabled") introduced a regression. The logic was originally: if (vq->iotlb) return 1; return A && B; After the patch the short-circuit logic for A was inverted: if (A || vq->iotlb) return A; return B; This patch fixes the regression by rewriting the checks in the obvious way, no longer returning A when vq->iotlb is non-NULL (which is hard to understand). Reported-by: syzbot+65a84dde0214b0387ccd@syzkaller.appspotmail.com Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Tejaswi Tanikella authored
[ Upstream commit 3f01ddb9 ] On receiving a packet the state index points to the rstate which must be used to fill up IP and TCP headers. But if the state index points to a rstate which is unitialized, i.e. filled with zeros, it gets stuck in an infinite loop inside ip_fast_csum trying to compute the ip checsum of a header with zero length. 89.666953: <2> [<ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468 89.666965: <2> [<ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c 89.666978: <2> [<ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0 89.666991: <2> [<ffffff9dd3e8a708>] ppp_input+0x104/0x198 89.667005: <2> [<ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370 89.667027: <2> [<ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250 89.667040: <2> [<ffffff9dd3e939e4>] pppopns_recv+0x44/0x60 89.667053: <2> [<ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c 89.667065: <2> [<ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38 89.667085: <2> [<ffffff9dd44f7358>] raw_rcv+0x124/0x154 89.667098: <2> [<ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c 89.667117: <2> [<ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c 89.667131: <2> [<ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c ./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output: ip_fast_csum at arch/arm64/include/asm/checksum.h:40 (inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615 Adding a variable to indicate if the current rstate is initialized. If such a packet arrives, move to toss state. Signed-off-by:
Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by:
-
Ka-Cheong Poon authored
[ Upstream commit a43cced9 ] rds_sendmsg() calls rds_send_mprds_hash() to find a c_path to use to send a message. Suppose the RDS connection is not yet up. In rds_send_mprds_hash(), it does if (conn->c_npaths == 0) wait_event_interruptible(conn->c_hs_waitq, (conn->c_npaths != 0)); If it is interrupted before the connection is set up, rds_send_mprds_hash() will return a non-zero hash value. Hence rds_sendmsg() will use a non-zero c_path to send the message. But if the RDS connection ends up to be non-MP capable, the message will be lost as only the zero c_path can be used. Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Bassem Boubaker authored
[ Upstream commit 53765341 ] The Cinterion AHS8 is a 3G device with one embedded WWAN interface using cdc_ether as a driver. The modem is controlled via AT commands through the exposed TTYs. AT+CGDCONT write command can be used to activate or deactivate a WWAN connection for a PDP context defined with the same command. UE supports one WWAN adapter. Signed-off-by:
Bassem Boubaker <bassem.boubaker@actia.fr> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Marek Szyprowski authored
commit 0c4c5860 upstream. Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14) [<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8) [<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c) [<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850) [<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8) [<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c) [<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24) [<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0) [<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0) [<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0) [<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0) [<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120) [<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c) [<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250) [<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4) [<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8) [<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c) [<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4) [<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114) [<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) Fixes: 5d389b12 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> [backport to v4.4.y/v4.9.y: context changes] Signed-off-by:
-
Sudhir Sreedharan authored
commit 7972326a upstream. This can be reproduced by bind/unbind the driver multiple times in AM3517 board. Analysis revealed that rtl8187_start() was invoked before probe finishes(ie. before the mutex is initialized). INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) [<c010e0d8>] (unwind_backtrace) from [<c010beac>] (show_stack+0x10/0x14) [<c010beac>] (show_stack) from [<c017401c>] (register_lock_class+0x4f4/0x55c) [<c017401c>] (register_lock_class) from [<c0176fe0>] (__lock_acquire+0x74/0x1938) [<c0176fe0>] (__lock_acquire) from [<c0178cfc>] (lock_acquire+0xfc/0x23c) [<c0178cfc>] (lock_acquire) from [<c08aa2f8>] (mutex_lock_nested+0x50/0x3b0) [<c08aa2f8>] (mutex_lock_nested) from [<c05f5bf8>] (rtl8187_start+0x2c/0xd54) [<c05f5bf8>] (rtl8187_start) from [<c082dea0>] (drv_start+0xa8/0x320) [<c082dea0>] (drv_start) from [<c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4) [<c084d1d4>] (ieee80211_do_open) from [<c069be94>] (__dev_open+0xb8/0x120) [<c069be94>] (__dev_open) from [<c069c11c>] (__dev_change_flags+0x88/0x14c) [<c069c11c>] (__dev_change_flags) from [<c069c1f8>] (dev_change_flags+0x18/0x48) [<c069c1f8>] (dev_change_flags) from [<c0710b08>] (devinet_ioctl+0x738/0x840) [<c0710b08>] (devinet_ioctl) from [<c067925c>] (sock_ioctl+0x164/0x2f4) [<c067925c>] (sock_ioctl) from [<c02883f8>] (do_vfs_ioctl+0x8c/0x9d0) [<c02883f8>] (do_vfs_ioctl) from [<c0288da8>] (SyS_ioctl+0x6c/0x7c) [<c0288da8>] (SyS_ioctl) from [<c0107760>] (ret_fast_syscall+0x0/0x1c) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = cd1ec000 [00000000] *pgd=8d1de831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250 Hardware name: Generic AM3517 (Flattened Device Tree) task: ce73eec0 task.stack: cd1ea000 PC is at mutex_lock_nested+0xe8/0x3b0 LR is at mutex_lock_nested+0xd0/0x3b0 Cc: stable@vger.kernel.org Signed-off-by:
Sudhir Sreedharan <ssreedharan@mvista.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Szymon Janc authored
commit 082f2300 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
