- 15 Sep, 2018 40 commits
-
-
Gustavo A. R. Silva authored
commit ad0eaee6 upstream. Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org [Gustavo: Backported to 3.16..4.18 - Remove code comment removal] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Schwidefsky authored
commit 5eda25b1 upstream. The memove, memset, memcpy, __memset16, __memset32 and __memset64 function have an additional indirect return branch in form of a "bzr" instruction. These need to use expolines as well. Cc: <stable@vger.kernel.org> # v4.17+ Fixes: 97489e06 ("s390/lib: use expoline for indirect branches") Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Tomas Winkler authored
commit cc365dcf upstream. >From the pci power documentation: "The driver itself should not call pm_runtime_allow(), though. Instead, it should let user space or some platform-specific code do that (user space can do it via sysfs as stated above)..." However, the S0ix residency cannot be reached without MEI device getting into low power state. Hence, for mei devices that support D0i3, it's better to make runtime power management mandatory and not rely on the system integration such as udev rules. This policy cannot be applied globally as some older platforms were found to have broken power management. Cc: <stable@vger.kernel.org> v4.13+ Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit c2d6511e upstream. sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy callbacks but it may fail before the timer is initialized due to missing options (either not supplied by user-space or set as a default qdisc), also q->qdisc is used by ->reset and ->destroy so we need it initialized. Reproduce: $ sysctl net.core.default_qdisc=tbf $ ip l set ethX up Crash log: [ 959.160172] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 959.160323] IP: qdisc_reset+0xa/0x5c [ 959.160400] PGD 59cdb067 [ 959.160401] P4D 59cdb067 [ 959.160466] PUD 59ccb067 [ 959.160532] PMD 0 [ 959.160597] [ 959.160706] Oops: 0000 [#1] SMP [ 959.160778] Modules linked in: sch_tbf sch_sfb sch_prio sch_netem [ 959.160891] CPU: 2 PID: 1562 Comm: ip Not tainted 4.13.0-rc6+ #62 [ 959.160998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 959.161157] task: ffff880059c9a700 task.stack: ffff8800376d0000 [ 959.161263] RIP: 0010:qdisc_reset+0xa/0x5c [ 959.161347] RSP: 0018:ffff8800376d3610 EFLAGS: 00010286 [ 959.161531] RAX: ffffffffa001b1dd RBX: ffff8800373a2800 RCX: 0000000000000000 [ 959.161733] RDX: ffffffff8215f160 RSI: ffffffff8215f160 RDI: 0000000000000000 [ 959.161939] RBP: ffff8800376d3618 R08: 00000000014080c0 R09: 00000000ffffffff [ 959.162141] R10: ffff8800376d3578 R11: 0000000000000020 R12: ffffffffa001d2c0 [ 959.162343] R13: ffff880037538000 R14: 00000000ffffffff R15: 0000000000000001 [ 959.162546] FS: 00007fcc5126b740(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 959.162844] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 959.163030] CR2: 0000000000000018 CR3: 000000005abc4000 CR4: 00000000000406e0 [ 959.163233] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 959.163436] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 959.163638] Call Trace: [ 959.163788] tbf_reset+0x19/0x64 [sch_tbf] [ 959.163957] qdisc_destroy+0x8b/0xe5 [ 959.164119] qdisc_create_dflt+0x86/0x94 [ 959.164284] ? dev_activate+0x129/0x129 [ 959.164449] attach_one_default_qdisc+0x36/0x63 [ 959.164623] netdev_for_each_tx_queue+0x3d/0x48 [ 959.164795] dev_activate+0x4b/0x129 [ 959.164957] __dev_open+0xe7/0x104 [ 959.165118] __dev_change_flags+0xc6/0x15c [ 959.165287] dev_change_flags+0x25/0x59 [ 959.165451] do_setlink+0x30c/0xb3f [ 959.165613] ? check_chain_key+0xb0/0xfd [ 959.165782] rtnl_newlink+0x3a4/0x729 [ 959.165947] ? rtnl_newlink+0x117/0x729 [ 959.166121] ? ns_capable_common+0xd/0xb1 [ 959.166288] ? ns_capable+0x13/0x15 [ 959.166450] rtnetlink_rcv_msg+0x188/0x197 [ 959.166617] ? rcu_read_unlock+0x3e/0x5f [ 959.166783] ? rtnl_newlink+0x729/0x729 [ 959.166948] netlink_rcv_skb+0x6c/0xce [ 959.167113] rtnetlink_rcv+0x23/0x2a [ 959.167273] netlink_unicast+0x103/0x181 [ 959.167439] netlink_sendmsg+0x326/0x337 [ 959.167607] sock_sendmsg_nosec+0x14/0x3f [ 959.167772] sock_sendmsg+0x29/0x2e [ 959.167932] ___sys_sendmsg+0x209/0x28b [ 959.168098] ? do_raw_spin_unlock+0xcd/0xf8 [ 959.168267] ? _raw_spin_unlock+0x27/0x31 [ 959.168432] ? __handle_mm_fault+0x651/0xdb1 [ 959.168602] ? check_chain_key+0xb0/0xfd [ 959.168773] __sys_sendmsg+0x45/0x63 [ 959.168934] ? __sys_sendmsg+0x45/0x63 [ 959.169100] SyS_sendmsg+0x19/0x1b [ 959.169260] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 959.169432] RIP: 0033:0x7fcc5097e690 [ 959.169592] RSP: 002b:00007ffd0d5c7b48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 959.169887] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007fcc5097e690 [ 959.170089] RDX: 0000000000000000 RSI: 00007ffd0d5c7b90 RDI: 0000000000000003 [ 959.170292] RBP: ffff8800376d3f98 R08: 0000000000000001 R09: 0000000000000003 [ 959.170494] R10: 00007ffd0d5c7910 R11: 0000000000000246 R12: 0000000000000006 [ 959.170697] R13: 000000000066f1a0 R14: 00007ffd0d5cfc40 R15: 0000000000000000 [ 959.170900] ? trace_hardirqs_off_caller+0xa7/0xcf [ 959.171076] Code: 00 41 c7 84 24 14 01 00 00 00 00 00 00 41 c7 84 24 98 00 00 00 00 00 00 00 41 5c 41 5d 41 5e 5d c3 66 66 66 66 90 55 48 89 e5 53 <48> 8b 47 18 48 89 fb 48 8b 40 48 48 85 c0 74 02 ff d0 48 8b bb [ 959.171637] RIP: qdisc_reset+0xa/0x5c RSP: ffff8800376d3610 [ 959.171821] CR2: 0000000000000018 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 634576a1 upstream. netem can fail in ->init due to missing options (either not supplied by user-space or used as a default qdisc) causing a timer->base null pointer deref in its ->destroy() and ->reset() callbacks. Reproduce: $ sysctl net.core.default_qdisc=netem $ ip l set ethX up Crash log: [ 1814.846943] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1814.847181] IP: hrtimer_active+0x17/0x8a [ 1814.847270] PGD 59c34067 [ 1814.847271] P4D 59c34067 [ 1814.847337] PUD 37374067 [ 1814.847403] PMD 0 [ 1814.847468] [ 1814.847582] Oops: 0000 [#1] SMP [ 1814.847655] Modules linked in: sch_netem(O) sch_fq_codel(O) [ 1814.847761] CPU: 3 PID: 1573 Comm: ip Tainted: G O 4.13.0-rc6+ #62 [ 1814.847884] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1814.848043] task: ffff88003723a700 task.stack: ffff88005adc8000 [ 1814.848235] RIP: 0010:hrtimer_active+0x17/0x8a [ 1814.848407] RSP: 0018:ffff88005adcb590 EFLAGS: 00010246 [ 1814.848590] RAX: 0000000000000000 RBX: ffff880058e359d8 RCX: 0000000000000000 [ 1814.848793] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880058e359d8 [ 1814.848998] RBP: ffff88005adcb5b0 R08: 00000000014080c0 R09: 00000000ffffffff [ 1814.849204] R10: ffff88005adcb660 R11: 0000000000000020 R12: 0000000000000000 [ 1814.849410] R13: ffff880058e359d8 R14: 00000000ffffffff R15: 0000000000000001 [ 1814.849616] FS: 00007f733bbca740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 1814.849919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1814.850107] CR2: 0000000000000000 CR3: 0000000059f0d000 CR4: 00000000000406e0 [ 1814.850313] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1814.850518] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1814.850723] Call Trace: [ 1814.850875] hrtimer_try_to_cancel+0x1a/0x93 [ 1814.851047] hrtimer_cancel+0x15/0x20 [ 1814.851211] qdisc_watchdog_cancel+0x12/0x14 [ 1814.851383] netem_reset+0xe6/0xed [sch_netem] [ 1814.851561] qdisc_destroy+0x8b/0xe5 [ 1814.851723] qdisc_create_dflt+0x86/0x94 [ 1814.851890] ? dev_activate+0x129/0x129 [ 1814.852057] attach_one_default_qdisc+0x36/0x63 [ 1814.852232] netdev_for_each_tx_queue+0x3d/0x48 [ 1814.852406] dev_activate+0x4b/0x129 [ 1814.852569] __dev_open+0xe7/0x104 [ 1814.852730] __dev_change_flags+0xc6/0x15c [ 1814.852899] dev_change_flags+0x25/0x59 [ 1814.853064] do_setlink+0x30c/0xb3f [ 1814.853228] ? check_chain_key+0xb0/0xfd [ 1814.853396] ? check_chain_key+0xb0/0xfd [ 1814.853565] rtnl_newlink+0x3a4/0x729 [ 1814.853728] ? rtnl_newlink+0x117/0x729 [ 1814.853905] ? ns_capable_common+0xd/0xb1 [ 1814.854072] ? ns_capable+0x13/0x15 [ 1814.854234] rtnetlink_rcv_msg+0x188/0x197 [ 1814.854404] ? rcu_read_unlock+0x3e/0x5f [ 1814.854572] ? rtnl_newlink+0x729/0x729 [ 1814.854737] netlink_rcv_skb+0x6c/0xce [ 1814.854902] rtnetlink_rcv+0x23/0x2a [ 1814.855064] netlink_unicast+0x103/0x181 [ 1814.855230] netlink_sendmsg+0x326/0x337 [ 1814.855398] sock_sendmsg_nosec+0x14/0x3f [ 1814.855584] sock_sendmsg+0x29/0x2e [ 1814.855747] ___sys_sendmsg+0x209/0x28b [ 1814.855912] ? do_raw_spin_unlock+0xcd/0xf8 [ 1814.856082] ? _raw_spin_unlock+0x27/0x31 [ 1814.856251] ? __handle_mm_fault+0x651/0xdb1 [ 1814.856421] ? check_chain_key+0xb0/0xfd [ 1814.856592] __sys_sendmsg+0x45/0x63 [ 1814.856755] ? __sys_sendmsg+0x45/0x63 [ 1814.856923] SyS_sendmsg+0x19/0x1b [ 1814.857083] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 1814.857256] RIP: 0033:0x7f733b2dd690 [ 1814.857419] RSP: 002b:00007ffe1d3387d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1814.858238] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f733b2dd690 [ 1814.858445] RDX: 0000000000000000 RSI: 00007ffe1d338820 RDI: 0000000000000003 [ 1814.858651] RBP: ffff88005adcbf98 R08: 0000000000000001 R09: 0000000000000003 [ 1814.858856] R10: 00007ffe1d3385a0 R11: 0000000000000246 R12: 0000000000000002 [ 1814.859060] R13: 000000000066f1a0 R14: 00007ffe1d3408d0 R15: 0000000000000000 [ 1814.859267] ? trace_hardirqs_off_caller+0xa7/0xcf [ 1814.859446] Code: 10 55 48 89 c7 48 89 e5 e8 45 a1 fb ff 31 c0 5d c3 31 c0 c3 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 53 49 89 fd 49 8b 45 30 <4c> 8b 20 41 8b 5c 24 38 31 c9 31 d2 48 c7 c7 50 8e 1d 82 41 89 [ 1814.860022] RIP: hrtimer_active+0x17/0x8a RSP: ffff88005adcb590 [ 1814.860214] CR2: 0000000000000000 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
-
Nikolay Aleksandrov authored
commit 32db864d upstream. If sch_hhf fails in its ->init() function (either due to wrong user-space arguments as below or memory alloc failure of hh_flows) it will do a null pointer deref of q->hh_flows in its ->destroy() function. To reproduce the crash: $ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000 Crash log: [ 690.654882] BUG: unable to handle kernel NULL pointer dereference at (null) [ 690.655565] IP: hhf_destroy+0x48/0xbc [ 690.655944] PGD 37345067 [ 690.655948] P4D 37345067 [ 690.656252] PUD 58402067 [ 690.656554] PMD 0 [ 690.656857] [ 690.657362] Oops: 0000 [#1] SMP [ 690.657696] Modules linked in: [ 690.658032] CPU: 3 PID: 920 Comm: tc Not tainted 4.13.0-rc6+ #57 [ 690.658525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 690.659255] task: ffff880058578000 task.stack: ffff88005acbc000 [ 690.659747] RIP: 0010:hhf_destroy+0x48/0xbc [ 690.660146] RSP: 0018:ffff88005acbf9e0 EFLAGS: 00010246 [ 690.660601] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 [ 690.661155] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff821f63f0 [ 690.661710] RBP: ffff88005acbfa08 R08: ffffffff81b10a90 R09: 0000000000000000 [ 690.662267] R10: 00000000f42b7019 R11: ffff880058578000 R12: 00000000ffffffea [ 690.662820] R13: ffff8800372f6400 R14: 0000000000000000 R15: 0000000000000000 [ 690.663769] FS: 00007f8ae5e8b740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 690.667069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 690.667965] CR2: 0000000000000000 CR3: 0000000058523000 CR4: 00000000000406e0 [ 690.668918] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 690.669945] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 690.671003] Call Trace: [ 690.671743] qdisc_create+0x377/0x3fd [ 690.672534] tc_modify_qdisc+0x4d2/0x4fd [ 690.673324] rtnetlink_rcv_msg+0x188/0x197 [ 690.674204] ? rcu_read_unlock+0x3e/0x5f [ 690.675091] ? rtnl_newlink+0x729/0x729 [ 690.675877] netlink_rcv_skb+0x6c/0xce [ 690.676648] rtnetlink_rcv+0x23/0x2a [ 690.677405] netlink_unicast+0x103/0x181 [ 690.678179] netlink_sendmsg+0x326/0x337 [ 690.678958] sock_sendmsg_nosec+0x14/0x3f [ 690.679743] sock_sendmsg+0x29/0x2e [ 690.680506] ___sys_sendmsg+0x209/0x28b [ 690.681283] ? __handle_mm_fault+0xc7d/0xdb1 [ 690.681915] ? check_chain_key+0xb0/0xfd [ 690.682449] __sys_sendmsg+0x45/0x63 [ 690.682954] ? __sys_sendmsg+0x45/0x63 [ 690.683471] SyS_sendmsg+0x19/0x1b [ 690.683974] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 690.684516] RIP: 0033:0x7f8ae529d690 [ 690.685016] RSP: 002b:00007fff26d2d6b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 690.685931] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f8ae529d690 [ 690.686573] RDX: 0000000000000000 RSI: 00007fff26d2d700 RDI: 0000000000000003 [ 690.687047] RBP: ffff88005acbff98 R08: 0000000000000001 R09: 0000000000000000 [ 690.687519] R10: 00007fff26d2d480 R11: 0000000000000246 R12: 0000000000000002 [ 690.687996] R13: 0000000001258070 R14: 0000000000000001 R15: 0000000000000000 [ 690.688475] ? trace_hardirqs_off_caller+0xa7/0xcf [ 690.688887] Code: 00 00 e8 2a 02 ae ff 49 8b bc 1d 60 02 00 00 48 83 c3 08 e8 19 02 ae ff 48 83 fb 20 75 dc 45 31 f6 4d 89 f7 4d 03 bd 20 02 00 00 <49> 8b 07 49 39 c7 75 24 49 83 c6 10 49 81 fe 00 40 00 00 75 e1 [ 690.690200] RIP: hhf_destroy+0x48/0xbc RSP: ffff88005acbf9e0 [ 690.690636] CR2: 0000000000000000 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Signed-off-by:
-
Nikolay Aleksandrov authored
commit e89d469e upstream. The below commit added a call to ->destroy() on init failure, but multiq still frees ->queues on error in init, but ->queues is also freed by ->destroy() thus we get double free and corrupted memory. Very easy to reproduce (eth0 not multiqueue): $ tc qdisc add dev eth0 root multiq RTNETLINK answers: Operation not supported $ ip l add dumdum type dummy (crash) Trace log: [ 3929.467747] general protection fault: 0000 [#1] SMP [ 3929.468083] Modules linked in: [ 3929.468302] CPU: 3 PID: 967 Comm: ip Not tainted 4.13.0-rc6+ #56 [ 3929.468625] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 3929.469124] task: ffff88003716a700 task.stack: ffff88005872c000 [ 3929.469449] RIP: 0010:__kmalloc_track_caller+0x117/0x1be [ 3929.469746] RSP: 0018:ffff88005872f6a0 EFLAGS: 00010246 [ 3929.470042] RAX: 00000000000002de RBX: 0000000058a59000 RCX: 00000000000002df [ 3929.470406] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff821f7020 [ 3929.470770] RBP: ffff88005872f6e8 R08: 000000000001f010 R09: 0000000000000000 [ 3929.471133] R10: ffff88005872f730 R11: 0000000000008cdd R12: ff006d75646d7564 [ 3929.471496] R13: 00000000014000c0 R14: ffff88005b403c00 R15: ffff88005b403c00 [ 3929.471869] FS: 00007f0b70480740(0000) GS:ffff88005d980000(0000) knlGS:0000000000000000 [ 3929.472286] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3929.472677] CR2: 00007ffcee4f3000 CR3: 0000000059d45000 CR4: 00000000000406e0 [ 3929.473209] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3929.474109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3929.474873] Call Trace: [ 3929.475337] ? kstrdup_const+0x23/0x25 [ 3929.475863] kstrdup+0x2e/0x4b [ 3929.476338] kstrdup_const+0x23/0x25 [ 3929.478084] __kernfs_new_node+0x28/0xbc [ 3929.478478] kernfs_new_node+0x35/0x55 [ 3929.478929] kernfs_create_link+0x23/0x76 [ 3929.479478] sysfs_do_create_link_sd.isra.2+0x85/0xd7 [ 3929.480096] sysfs_create_link+0x33/0x35 [ 3929.480649] device_add+0x200/0x589 [ 3929.481184] netdev_register_kobject+0x7c/0x12f [ 3929.481711] register_netdevice+0x373/0x471 [ 3929.482174] rtnl_newlink+0x614/0x729 [ 3929.482610] ? rtnl_newlink+0x17f/0x729 [ 3929.483080] rtnetlink_rcv_msg+0x188/0x197 [ 3929.483533] ? rcu_read_unlock+0x3e/0x5f [ 3929.483984] ? rtnl_newlink+0x729/0x729 [ 3929.484420] netlink_rcv_skb+0x6c/0xce [ 3929.484858] rtnetlink_rcv+0x23/0x2a [ 3929.485291] netlink_unicast+0x103/0x181 [ 3929.485735] netlink_sendmsg+0x326/0x337 [ 3929.486181] sock_sendmsg_nosec+0x14/0x3f [ 3929.486614] sock_sendmsg+0x29/0x2e [ 3929.486973] ___sys_sendmsg+0x209/0x28b [ 3929.487340] ? do_raw_spin_unlock+0xcd/0xf8 [ 3929.487719] ? _raw_spin_unlock+0x27/0x31 [ 3929.488092] ? __handle_mm_fault+0x651/0xdb1 [ 3929.488471] ? check_chain_key+0xb0/0xfd [ 3929.488847] __sys_sendmsg+0x45/0x63 [ 3929.489206] ? __sys_sendmsg+0x45/0x63 [ 3929.489576] SyS_sendmsg+0x19/0x1b [ 3929.489901] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 3929.490172] RIP: 0033:0x7f0b6fb93690 [ 3929.490423] RSP: 002b:00007ffcee4ed588 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 3929.490881] RAX: ffffffffffffffda RBX: ffffffff810d278c RCX: 00007f0b6fb93690 [ 3929.491198] RDX: 0000000000000000 RSI: 00007ffcee4ed5d0 RDI: 0000000000000003 [ 3929.491521] RBP: ffff88005872ff98 R08: 0000000000000001 R09: 0000000000000000 [ 3929.491801] R10: 00007ffcee4ed350 R11: 0000000000000246 R12: 0000000000000002 [ 3929.492075] R13: 000000000066f1a0 R14: 00007ffcee4f5680 R15: 0000000000000000 [ 3929.492352] ? trace_hardirqs_off_caller+0xa7/0xcf [ 3929.492590] Code: 8b 45 c0 48 8b 45 b8 74 17 48 8b 4d c8 83 ca ff 44 89 ee 4c 89 f7 e8 83 ca ff ff 49 89 c4 eb 49 49 63 56 20 48 8d 48 01 4d 8b 06 <49> 8b 1c 14 48 89 c2 4c 89 e0 65 49 0f c7 08 0f 94 c0 83 f0 01 [ 3929.493335] RIP: __kmalloc_track_caller+0x117/0x1be RSP: ffff88005872f6a0 Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: f07d1501 ("multiq: Further multiqueue cleanup") Signed-off-by:
-
Nikolay Aleksandrov authored
commit 88c2ace6 upstream. The commit below added a call to the ->destroy() callback for all qdiscs which failed in their ->init(), but some were not prepared for such change and can't handle partially initialized qdisc. HTB is one of them and if any error occurs before the qdisc watchdog timer and qdisc work are initialized then we can hit either a null ptr deref (timer->base) when canceling in ->destroy or lockdep error info about trying to register a non-static key and a stack dump. So to fix these two move the watchdog timer and workqueue init before anything that can err out. To reproduce userspace needs to send broken htb qdisc create request, tested with a modified tc (q_htb.c). Trace log: [ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2710.897977] IP: hrtimer_active+0x17/0x8a [ 2710.898174] PGD 58fab067 [ 2710.898175] P4D 58fab067 [ 2710.898353] PUD 586c0067 [ 2710.898531] PMD 0 [ 2710.898710] [ 2710.899045] Oops: 0000 [#1] SMP [ 2710.899232] Modules linked in: [ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54 [ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000 [ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a [ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246 [ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000 [ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298 [ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001 [ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000 [ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0 [ 2710.901907] FS: 00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0 [ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2710.903180] Call Trace: [ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93 [ 2710.903504] hrtimer_cancel+0x15/0x20 [ 2710.903667] qdisc_watchdog_cancel+0x12/0x14 [ 2710.903866] htb_destroy+0x2e/0xf7 [ 2710.904097] qdisc_create+0x377/0x3fd [ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd [ 2710.904511] rtnetlink_rcv_msg+0x188/0x197 [ 2710.904682] ? rcu_read_unlock+0x3e/0x5f [ 2710.904849] ? rtnl_newlink+0x729/0x729 [ 2710.905017] netlink_rcv_skb+0x6c/0xce [ 2710.905183] rtnetlink_rcv+0x23/0x2a [ 2710.905345] netlink_unicast+0x103/0x181 [ 2710.905511] netlink_sendmsg+0x326/0x337 [ 2710.905679] sock_sendmsg_nosec+0x14/0x3f [ 2710.905847] sock_sendmsg+0x29/0x2e [ 2710.906010] ___sys_sendmsg+0x209/0x28b [ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8 [ 2710.906346] ? _raw_spin_unlock+0x27/0x31 [ 2710.906514] ? __handle_mm_fault+0x651/0xdb1 [ 2710.906685] ? check_chain_key+0xb0/0xfd [ 2710.906855] __sys_sendmsg+0x45/0x63 [ 2710.907018] ? __sys_sendmsg+0x45/0x63 [ 2710.907185] SyS_sendmsg+0x19/0x1b [ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2 Note that probably this bug goes further back because the default qdisc handling always calls ->destroy on init failure too. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by:
-
Miklos Szeredi authored
commit eea2fb48 upstream. When mounting overlayfs it needs a clean "work" directory under the supplied workdir. Previously the mount code removed this directory if it already existed and created a new one. If the removal failed (e.g. directory was not empty) then it fell back to a read-only mount not using the workdir. While this has never been reported, it is possible to get a non-empty "work" dir from a previous mount of overlayfs in case of crash in the middle of an operation using the work directory. In this case the left over state should be discarded and the overlay filesystem will be consistent, guaranteed by the atomicity of operations on moving to/from the workdir to the upper layer. This patch implements cleaning out any files left in workdir. It is implemented using real recursion for simplicity, but the depth is limited to 2, because the worst case is that of a directory containing whiteouts under "work". Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
-
Antonio Murdaca authored
commit 3fe6e52f upstream. In user namespace the whiteout creation fails with -EPERM because the current process isn't capable(CAP_SYS_ADMIN) when setting xattr. A simple reproducer: $ mkdir upper lower work merged lower/dir $ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged $ unshare -m -p -f -U -r bash Now as root in the user namespace: \# touch merged/dir/{1,2,3} # this will force a copy up of lower/dir \# rm -fR merged/* This ends up failing with -EPERM after the files in dir has been correctly deleted: unlinkat(4, "2", 0) = 0 unlinkat(4, "1", 0) = 0 unlinkat(4, "3", 0) = 0 close(4) = 0 unlinkat(AT_FDCWD, "merged/dir", AT_REMOVEDIR) = -1 EPERM (Operation not permitted) Interestingly, if you don't place files in merged/dir you can remove it, meaning if upper/dir does not exist, creating the char device file works properly in that same location. This patch uses ovl_sb_creator_cred() to get the cred struct from the superblock mounter and override the old cred with these new ones so that the whiteout creation is possible because overlay is wrong in assuming that the creds it will get with prepare_creds will be in the initial user namespace. The old cap_raise game is removed in favor of just overriding the old cred struct. This patch also drops from ovl_copy_up_one() the following two lines: override_cred->fsuid = stat->uid; override_cred->fsgid = stat->gid; This is because the correct uid and gid are taken directly with the stat struct and correctly set with ovl_set_attr(). Signed-off-by:
Antonio Murdaca <runcom@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 56656e96 upstream. The 'is_merge' is an historical naming from when only a single lower layer could exist. With the introduction of multiple lower layers the meaning of this flag was changed to mean only the "lowest layer" (while all lower layers were being merged). So now 'is_merge' is inaccurate and hence renaming to 'is_lowest' Signed-off-by:
-
Marc Zyngier authored
commit 327ebe1f upstream. The GIC has no such thing as interrupt 1020: the last valid ID is 1019, and the range 1020-1023 is reserved - 1023 indicating that no interrupt is pending. So let's make sure we don't try to handle this ID. This bug has been in since the initial GIC code was introduced in 8ad68bbf ("[ARM] Add support for ARM RealView board"). Reported-by:
Eric Auger <eric.auger@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by:
-
Marc Zyngier authored
commit 8f318526 upstream. Commit 1a1ebd5f ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor") fixed the missing barrier on arm64, but forgot to update the 32bit counterpart, which has the same requirements. Let's fix it. Fixes: 1a1ebd5f ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor") Signed-off-by:
-
Shanker Donthineni authored
commit 2eca0d6c upstream. Function its_alloc_tables() maintains two local variables, "order" and and "alloc_size", to hold memory size that has been allocated to ITS_BASEn. We don't always refresh the variable alloc_size whenever value of the variable order changes, causing the following two problems. - Cache flush operation with size more than required. - Information reported by pr_info is not correct. Use a helper macro that converts page order to size in bytes instead of variable "alloc_size" to fix both the problems. Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
-
Shanker Donthineni authored
commit 1a485f4d upstream. The current ITS driver has a memory leak in its_free_tables(). It happens on tear down path of the driver when its_probe() call fails. its_free_tables() should free the exact number of pages that have been allocated, not just a single page as current code does. This patch records the memory size for each ITS_BASERn at the time of page allocation and uses the same size information when freeing pages to fix the issue. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Marc Zyngier authored
commit 18aa60ce upstream. When the programming of a GITS_BASERn register fails because of an unsupported ITS page size, we retry it with a smaller page size. Unfortunately, we don't recompute the number of allocated ITS pages, indicating the wrong value computed in the original allocation. A convenient fix is to free the pages we allocated, update the page size, and restart the allocation. This will ensure that we always allocate the right amount in the case of a device table, specially if we have to reduce the allocation order to stay within the boundaries of the ITS maximum allocation. Reported-and-tested-by:
Ma Jun <majun258@huawei.com> Signed-off-by:
-
Sudeep Holla authored
commit a946e8c7 upstream. In case of a wakeup interrupt, irq_pm_check_wakeup disables the interrupt and marks it pending and suspended, disables it and notifies the pm core about the wake event. The interrupt gets handled later once the system is resumed. However the irq stats is updated twice: once when it's disabled waiting for the system to resume and later when it's handled, resulting in wrong counting of the wakeup interrupt when waking up the system. This patch updates the interrupt count so that it's updated only when the interrupt gets handled. It's already handled correctly in handle_edge_irq and handle_edge_eoi_irq. Reported-by:
Manoil Claudiu <claudiu.manoil@freescale.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1446661957-1019-1-git-send-email-sudeep.holla@arm.comSigned-off-by:
-
Chas Williams authored
Commit cdbf9267 ("mm: numa: avoid waiting on freed migrated pages") was an incomplete backport of the upstream commit. It is necessary to always reset page_nid before attempting any early exit. The original commit conflicted due to lack of commit 82b0f8c3 ("mm: join struct fault_env and vm_fault") in 4.9 so it wasn't a clean application, and the change must have just gotten lost in the noise. Signed-off-by:
Chas Williams <chas3@att.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
commit cb5c6568 upstream. In commit ab123fe0 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe0 ("enic: handle mtu change for vf properly") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
Fabio Estevam authored
This reverts commit 0d0af17a. This commit causes reboot to fail on imx6 wandboard, so let's revert it. Cc: <stable@vger.kernel.org> #4.4 Reported-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Tyler Hicks authored
The irda_setsockopt() function conditionally allocates memory for a new self->ias_object or, in some cases, reuses the existing self->ias_object. Existing objects were incorrectly reinserted into the LM_IAS database which corrupted the doubly linked list used for the hashbin implementation of the LM_IAS database. When combined with a memory leak in irda_bind(), this issue could be leveraged to create a use-after-free vulnerability in the hashbin list. This patch fixes the issue by only inserting newly allocated objects into the database. CVE-2018-6555 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reviewed-by:
Seth Arnold <seth.arnold@canonical.com> Reviewed-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Tyler Hicks authored
The irda_bind() function allocates memory for self->ias_obj without checking to see if the socket is already bound. A userspace process could repeatedly bind the socket, have each new object added into the LM-IAS database, and lose the reference to the old object assigned to the socket to exhaust memory resources. This patch errors out of the bind operation when self->ias_obj is already assigned. CVE-2018-6554 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Randy Dunlap authored
commit 914b087f upstream. When $DEPMOD is not found, only print a warning instead of exiting with an error message and error status: Warning: 'make modules_install' requires /sbin/depmod. Please install it. This is probably in the kmod package. Change the Error to a Warning because "not all build hosts for cross compiling Linux are Linux systems and are able to provide a working port of depmod, especially at the file patch /sbin/depmod." I.e., "make modules_install" may be used to copy/install the loadable modules files to a target directory on a build system and then transferred to an embedded device where /sbin/depmod is run instead of it being run on the build system. Fixes: 934193a6 ("kbuild: verify that $DEPMOD is installed") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: stable@vger.kernel.org Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Maxim Zhukov <mussitantesmortem@gmail.com> Signed-off-by:
-
Juergen Gross authored
commit b2d7a075 upstream. Using only 32-bit writes for the pte will result in an intermediate L1TF vulnerable PTE. When running as a Xen PV guest this will at once switch the guest to shadow mode resulting in a loss of performance. Use arch_atomic64_xchg() instead which will perform the requested operation atomically with all 64 bits. Some performance considerations according to: https://software.intel.com/sites/default/files/managed/ad/dc/Intel-Xeon-Scalable-Processor-throughput-latency.pdf The main number should be the latency, as there is no tight loop around native_ptep_get_and_clear(). "lock cmpxchg8b" has a latency of 20 cycles, while "lock xchg" (with a memory operand) isn't mentioned in that document. "lock xadd" (with xadd having 3 cycles less latency than xchg) has a latency of 11, so we can assume a latency of 14 for "lock xchg". Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> [ Atomic operations gained an arch_ prefix in 8bf705d1 ("locking/atomic/x86: Switch atomic.h to use atomic-instrumented.h") so s/arch_atomic64_xchg/atomic64_xchg/ for backport.] Signed-off-by:
-
Joel Fernandes (Google) authored
commit fc91a3c4 upstream. While debugging an issue debugobject tracking warned about an annotation issue of an object on stack. It turned out that the issue was due to the object in concern being on a different stack which was due to another issue. Thomas suggested to print the pointers and the location of the stack for the currently running task. This helped to figure out that the object was on the wrong stack. As this is general useful information for debugging similar issues, make the error message more informative by printing the pointers. [ tglx: Massaged changelog ] Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: kernel-team@android.com Cc: Arnd Bergmann <arnd@arndb.de> Cc: astrachan@google.com Link: https://lkml.kernel.org/r/20180723212531.202328-1-joel@joelfernandes.orgSigned-off-by:
-
Qu Wenruo authored
[ Upstream commit 43794446 ] [BUG] Under certain KVM load and LTP tests, it is possible to hit the following calltrace if quota is enabled: BTRFS critical (device vda2): unable to find logical 8820195328 length 4096 BTRFS critical (device vda2): unable to find logical 8820195328 length 4096 WARNING: CPU: 0 PID: 49 at ../block/blk-core.c:172 blk_status_to_errno+0x1a/0x30 CPU: 0 PID: 49 Comm: kworker/u2:1 Not tainted 4.12.14-15-default #1 SLE15 (unreleased) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] task: ffff9f827b340bc0 task.stack: ffffb4f8c0304000 RIP: 0010:blk_status_to_errno+0x1a/0x30 Call Trace: submit_extent_page+0x191/0x270 [btrfs] ? btrfs_create_repair_bio+0x130/0x130 [btrfs] __do_readpage+0x2d2/0x810 [btrfs] ? btrfs_create_repair_bio+0x130/0x130 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] __extent_read_full_page+0xe7/0x100 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] read_extent_buffer_pages+0x1ab/0x2d0 [btrfs] ? run_one_async_done+0xc0/0xc0 [btrfs] btree_read_extent_buffer_pages+0x94/0xf0 [btrfs] read_tree_block+0x31/0x60 [btrfs] read_block_for_search.isra.35+0xf0/0x2e0 [btrfs] btrfs_search_slot+0x46b/0xa00 [btrfs] ? kmem_cache_alloc+0x1a8/0x510 ? btrfs_get_token_32+0x5b/0x120 [btrfs] find_parent_nodes+0x11d/0xeb0 [btrfs] ? leaf_space_used+0xb8/0xd0 [btrfs] ? btrfs_leaf_free_space+0x49/0x90 [btrfs] ? btrfs_find_all_roots_safe+0x93/0x100 [btrfs] btrfs_find_all_roots_safe+0x93/0x100 [btrfs] btrfs_find_all_roots+0x45/0x60 [btrfs] btrfs_qgroup_trace_extent_post+0x20/0x40 [btrfs] btrfs_add_delayed_data_ref+0x1a3/0x1d0 [btrfs] btrfs_alloc_reserved_file_extent+0x38/0x40 [btrfs] insert_reserved_file_extent.constprop.71+0x289/0x2e0 [btrfs] btrfs_finish_ordered_io+0x2f4/0x7f0 [btrfs] ? pick_next_task_fair+0x2cd/0x530 ? __switch_to+0x92/0x4b0 btrfs_worker_helper+0x81/0x300 [btrfs] process_one_work+0x1da/0x3f0 worker_thread+0x2b/0x3f0 ? process_one_work+0x3f0/0x3f0 kthread+0x11a/0x130 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x35/0x40 BTRFS critical (device vda2): unable to find logical 8820195328 length 16384 BTRFS: error (device vda2) in btrfs_finish_ordered_io:3023: errno=-5 IO failure BTRFS info (device vda2): forced readonly BTRFS error (device vda2): pending csums is 2887680 [CAUSE] It's caused by race with block group auto removal: - There is a meta block group X, which has only one tree block The tree block belongs to fs tree 257. - In current transaction, some operation modified fs tree 257 The tree block gets COWed, so the block group X is empty, and marked as unused, queued to be deleted. - Some workload (like fsync) wakes up cleaner_kthread() Which will call btrfs_delete_unused_bgs() to remove unused block groups. So block group X along its chunk map get removed. - Some delalloc work finished for fs tree 257 Quota needs to get the original reference of the extent, which will read tree blocks of commit root of 257. Then since the chunk map gets removed, the above warning gets triggered. [FIX] Just let btrfs_delete_unused_bgs() skip block group which still has pinned bytes. However there is a minor side effect: currently we only queue empty blocks at update_block_group(), and such empty block group with pinned bytes won't go through update_block_group() again, such block group won't be removed, until it gets new extent allocated and removed. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit 389305b2 ] Invalid reloc tree can cause kernel NULL pointer dereference when btrfs does some cleanup of the reloc roots. It turns out that fs_info::reloc_ctl can be NULL in btrfs_recover_relocation() as we allocate relocation control after all reloc roots have been verified. So when we hit: note, we haven't called set_reloc_control() thus fs_info::reloc_ctl is still NULL. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199833Reported-by:
Xu Wen <wen.xu@gatech.edu> Signed-off-by:
Gu Jinxiang <gujx@cn.fujitsu.com> Reviewed-by:
-
Misono Tomohiro authored
[ Upstream commit 1e7e1f9e ] on-disk devs stats value is updated in btrfs_run_dev_stats(), which is called during commit transaction, if device->dev_stats_ccnt is not zero. Since current replace operation does not touch dev_stats_ccnt, on-disk dev stats value is not updated. Therefore "btrfs device stats" may return old device's value after umount/mount (Example: See "btrfs ins dump-t -t DEV $DEV" after btrfs/100 finish). Fix this by just incrementing dev_stats_ccnt in btrfs_dev_replace_finishing() when replace is succeeded and this will update the values. Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Reviewed-by:
-
Mahesh Salgaonkar authored
[ Upstream commit 74e96bf4 ] The global mce data buffer that used to copy rtas error log is of 2048 (RTAS_ERROR_LOG_MAX) bytes in size. Before the copy we read extended_log_length from rtas error log header, then use max of extended_log_length and RTAS_ERROR_LOG_MAX as a size of data to be copied. Ideally the platform (phyp) will never send extended error log with size > 2048. But if that happens, then we have a risk of buffer overrun and corruption. Fix this by using min_t instead. Fixes: d368514c ("powerpc: Fix corruption when grabbing FWNMI data") Reported-by:
Michal Suchanek <msuchanek@suse.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Steve French authored
[ Upstream commit 289131e1 ] For SMB2/SMB3 the number of requests sent was not displayed in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was enabled (only number of failed requests displayed). As with earlier dialects, we should be displaying these counters if CONFIG_CIFS_STATS is enabled. They are important for debugging. e.g. when you cat /proc/fs/cifs/Stats (before the patch) Resources in use CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 690 maximum at one time: 2 1) \\localhost\test SMBs: 975 Negotiates: 0 sent 0 failed SessionSetups: 0 sent 0 failed Logoffs: 0 sent 0 failed TreeConnects: 0 sent 0 failed TreeDisconnects: 0 sent 0 failed Creates: 0 sent 2 failed Closes: 0 sent 0 failed Flushes: 0 sent 0 failed Reads: 0 sent 0 failed Writes: 0 sent 0 failed Locks: 0 sent 0 failed IOCTLs: 0 sent 1 failed Cancels: 0 sent 0 failed Echos: 0 sent 0 failed QueryDirectories: 0 sent 63 failed Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Steve French authored
[ Upstream commit c281bc0c ] echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats but there were four (see example below) that were not reset (bytes read and witten, total vfs ops and max ops at one time). ... 0 session 0 share reconnects Total vfs operations: 100 maximum at one time: 2 1) \\localhost\test SMBs: 0 Bytes read: 502092 Bytes written: 31457286 TreeConnects: 0 total 0 failed TreeDisconnects: 0 total 0 failed ... This patch fixes cifs_stats_proc_write to properly reset those four. Signed-off-by:
-
Breno Leitao authored
[ Upstream commit 7c27a26e ] There are some powerpc selftests, as tm/tm-unavailable, that run for a long period (>120 seconds), and if it is interrupted, as pressing CRTL-C (SIGINT), the foreground process (harness) dies but the child process and threads continue to execute (with PPID = 1 now) in background. In this case, you'd think the whole test exited, but there are remaining threads and processes being executed in background. Sometimes these zombies processes are doing annoying things, as consuming the whole CPU or dumping things to STDOUT. This patch fixes this problem by attaching an empty signal handler to SIGINT in the harness process. This handler will interrupt (EINTR) the parent process waitpid() call, letting the code to follow through the normal flow, which will kill all the processes in the child process group. This patch also fixes a typo. Signed-off-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
-
Ian Abbott authored
[ Upstream commit e083926b ] The PFI subdevice flags indicate that the subdevice is readable and writeable, but that is only true for the supported "M-series" boards, not the older "E-series" boards. Only set the SDF_READABLE and SDF_WRITABLE subdevice flags for the M-series boards. These two flags are mainly for informational purposes. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
John Pittman authored
[ Upstream commit 784c9a29 ] It was reported that softlockups occur when using dm-snapshot ontop of slow (rbd) storage. E.g.: [ 4047.990647] watchdog: BUG: soft lockup - CPU#10 stuck for 22s! [kworker/10:23:26177] ... [ 4048.034151] Workqueue: kcopyd do_work [dm_mod] [ 4048.034156] RIP: 0010:copy_callback+0x41/0x160 [dm_snapshot] ... [ 4048.034190] Call Trace: [ 4048.034196] ? __chunk_is_tracked+0x70/0x70 [dm_snapshot] [ 4048.034200] run_complete_job+0x5f/0xb0 [dm_mod] [ 4048.034205] process_jobs+0x91/0x220 [dm_mod] [ 4048.034210] ? kcopyd_put_pages+0x40/0x40 [dm_mod] [ 4048.034214] do_work+0x46/0xa0 [dm_mod] [ 4048.034219] process_one_work+0x171/0x370 [ 4048.034221] worker_thread+0x1fc/0x3f0 [ 4048.034224] kthread+0xf8/0x130 [ 4048.034226] ? max_active_store+0x80/0x80 [ 4048.034227] ? kthread_bind+0x10/0x10 [ 4048.034231] ret_from_fork+0x35/0x40 [ 4048.034233] Kernel panic - not syncing: softlockup: hung tasks Fix this by calling cond_resched() after run_complete_job()'s callout to the dm_kcopyd_notify_fn (which is dm-snap.c:copy_callback in the above trace). Signed-off-by:
John Pittman <jpittman@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit dfd0309f ] pcie->realio.end should be the address of last byte of the area, therefore using resource_size() of another resource is not correct, we must substract 1 to get the address of the last byte. Fixes: 11be6547 ("PCI: mvebu: Adapt to the new device tree layout") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 0756c57b ] We accidentally return success instead of -ENOMEM on this error path. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stefan Haberland authored
[ Upstream commit 669f3765 ] During offline processing two worker threads are canceled without freeing the device reference which leads to a hanging offline process. Reviewed-by:
Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit c42d3be0 ] The problem is the the calculation should be "end - start + 1" but the plus one is missing in this calculation. Fixes: 8626816e ("powerpc: add support for MPIC message register API") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Jean-Philippe Brucker authored
[ Upstream commit 92aef467 ] Currently when virtio_find_single_vq fails, we go through del_vqs which throws a warning (Trying to free already-free IRQ). Skip del_vqs if vq allocation failed. Link: http://lkml.kernel.org/r/20180524101021.49880-1-jean-philippe.brucker@arm.comSigned-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by:
Greg Kurz <groug@kaod.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Jonas Gorski authored
[ Upstream commit 0702bc4d ] When compiling bmips with SMP disabled, the build fails with: drivers/irqchip/irq-bcm7038-l1.o: In function `bcm7038_l1_cpu_offline': drivers/irqchip/irq-bcm7038-l1.c:242: undefined reference to `irq_set_affinity_locked' make[5]: *** [vmlinux] Error 1 Fix this by adding and setting bcm7038_l1_cpu_offline only when actually compiling for SMP. It wouldn't have been used anyway, as it requires CPU_HOTPLUG, which in turn requires SMP. Fixes: 34c53579 ("irqchip/bcm7038-l1: Implement irq_cpu_offline() callback") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
-
