- 13 Jul, 2022 22 commits
-
-
Oleksandr Mazur authored
Separate flags to make it possible to alter them separately; Move bridge flags setting logic from HW API level to prestera_main where it belongs; Move bridge flags parsing (and setting using prestera API) to prestera_switchdev.c - module responsible for bridge operations handling; Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthias May authored
The current code allows to inherit the TTL (hop_limit) from the payload when skb->protocol is ETH_P_IP or ETH_P_IPV6. However when the payload is VLAN encapsulated (e.g because the tunnel is of type GRETAP), then this inheriting does not work, because the visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD. Instead of skb->protocol, use skb_protocol(). Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthias May authored
When the payload is a VLAN encapsulated IPv6/IPv6 frame, we can skip the 802.1q/802.1ad ethertypes and jump to the actual protocol. This way we treat IPv4/IPv6 frames as IP instead of as "other". Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthias May authored
The current code always forces a dscp of 0 for all non-IP frames. However when setting a specific TOS with the command ip link add name tep0 type ip6gretap local fdd1:ced0:5d88:3fce::1 remote fdd1:ced0:5d88:3fce::2 tos 0xa0 one would expect all GRE encapsulated frames to have a TOS of 0xA0. and not only when the payload is IPv4/IPv6. Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthias May authored
The current code allows to inherit the TOS, TTL, DF from the payload when skb->protocol is ETH_P_IP or ETH_P_IPV6. However when the payload is VLAN encapsulated (e.g because the tunnel is of type GRETAP), then this inheriting does not work, because the visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD. Instead of skb->protocol, use skb_protocol(). Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Justin Stitt authored
When building with Clang we encounter these warnings: | drivers/net/ethernet/qlogic/qed/qed_dev.c:416:30: error: format | specifies type 'char' but the argument has type 'u32' (aka 'unsigned | int') [-Werror,-Wformat] i); - | drivers/net/ethernet/qlogic/qed/qed_dev.c:630:13: error: format | specifies type 'char' but the argument has type 'int' [-Werror,-Wformat] | p_llh_info->num_ppfid - 1); For the first warning, `i` is a u32 which is much wider than the format specifier `%hhd` describes. This results in a loss of bits after 2^7. The second warning involves implicit integer promotion as the resulting type of addition cannot be smaller than an int. example: `` uint8_t a = 4, b = 7; int size = sizeof(a + b - 1); printf("%d\n", size); // output: 4 ``` See more: (https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules) "Integer types smaller than int are promoted when an operation is performed on them. If all values of the original type can be represented as an int, the value of the smaller type is converted to an int; otherwise, it is converted to an unsigned int." Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20220711232404.2189257-1-justinstitt@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Lorenzo Bianconi authored
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220711230751.3124415-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Support changes to initial subflow priority This series updates the in-kernel MPTCP path manager to allow changes to subflow priority for the first subflow created for each MPTCP connection (the one created with the MP_CAPABLE handshake). Patches 1 and 2 do some refactoring to simplify the new functionality. Patch 3 introduces the new feature to change the initial subflow priority and send the MP_PRIO header on that subflow. Patch 4 cleans up code related to tracking endpoint ids on the initial subflow. Patch 5 adds a selftest to confirm that subflow priorities are updated as expected. ==================== Link: https://lore.kernel.org/r/20220711191633.80826-1-mathew.j.martineau@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Add a couple of test-cases covering the newly introduced features - priority update for the MPC subflow. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Currently the id accounting for the ID 0 subflow is not correct: at creation time we mark (correctly) as unavailable the endpoint id corresponding the MPC subflow source address, while at subflow removal time set as available the id 0. With this change we track explicitly the endpoint id corresponding to the MPC subflow so that we can mark it as available at removal time. Additionally this allow deleting the initial subflow via the NL PM specifying the corresponding endpoint id. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Any local endpoints configured on the address matching the MPC subflow are currently ignored. Specifically, setting a backup flag on them has no effect on the first subflow, as the MPC handshake can't carry such info. This change refactors the MPC endpoint id accounting to additionally fetch the priority info from the relevant endpoint and eventually trigger the MP_PRIO handshake as needed. As a result, the MPC subflow now switches to backup priority after that the MPTCP socket is fully established, according to the local endpoint configuration. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
When looking-up a socket address in the endpoint list, we must prefer port-based matches over address only match. Ensure that port-based endpoints are listed first, using head insertion for them. Additionally be sure that only port-based endpoints carry a non zero port number. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
The in-kernel PM has a bit of duplicate code related to ack generation. Create a new helper factoring out the PM-specific needs and use it in a couple of places. As a bonus, mptcp_subflow_send_ack() is not used anymore outside its own compilation unit and can become static. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
XueBing Chen authored
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by: XueBing Chen <chenxuebing@jari.cn> Link: https://lore.kernel.org/r/2a08f6c1.e30.181ed8b49ad.Coremail.chenxuebing@jari.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yonglong Li authored
current code of __tcp_retransmit_skb only check TCP_SKB_CB(skb)->seq in send window, and TCP_SKB_CB(skb)->seq_end maybe out of send window. If receiver has shrunk his window, and skb is out of new window, it should retransmit a smaller portion of the payload. test packetdrill script: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8> +.05 < S. 0:0(0) ack 1 win 6000 <mss 1000,nop,nop,sackOK> +0 > . 1:1(0) ack 1 +0 write(3, ..., 10000) = 10000 +0 > . 1:2001(2000) ack 1 win 65535 +0 > . 2001:4001(2000) ack 1 win 65535 +0 > . 4001:6001(2000) ack 1 win 65535 +.05 < . 1:1(0) ack 4001 win 1001 and tcpdump show: 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 1:2001, ack 1, win 65535, length 2000 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 2001:4001, ack 1, win 65535, length 2000 192.168.226.67.55 > 192.0.2.1.8080: Flags [P.], seq 4001:5001, ack 1, win 65535, length 1000 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 5001:6001, ack 1, win 65535, length 1000 192.0.2.1.8080 > 192.168.226.67.55: Flags [.], ack 4001, win 1001, length 0 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 5001:6001, ack 1, win 65535, length 1000 192.168.226.67.55 > 192.0.2.1.8080: Flags [P.], seq 4001:5001, ack 1, win 65535, length 1000 when cient retract window to 1001, send window is [4001,5002], but TLP send 5001-6001 packet which is out of send window. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1657532838-20200-1-git-send-email-liyonglong@chinatelecom.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Diana Wang authored
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. This features is currently implemented only for NFD3 and this patch adds support for it with NFDK. Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220711093048.1911698-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Justin Stitt authored
When building with Clang we encounter these warnings: | drivers/net/ethernet/netronome/nfp/nfp_app.c:233:99: error: format | specifies type 'unsigned char' but the argument has underlying type | 'unsigned int' [-Werror,-Wformat] nfp_err(pf->cpp, "unknown FW app ID | 0x%02hhx, driver too old or support for FW not built in\n", id); - | drivers/net/ethernet/netronome/nfp/nfp_main.c:396:11: error: format | specifies type 'unsigned char' but the argument has type 'int' | [-Werror,-Wformat] serial, interface >> 8, interface & 0xff); Correct format specifier for `id` is `%x` since the default type for the `nfp_app_id` enum is `unsigned int`. The second warning is also solved by using the `%x` format specifier as the expressions involving `interface` are implicity promoted to integers (%x is used to maintain hexadecimal representation). Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220712000152.2292031-1-justinstitt@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Ioana Ciornei says: ==================== dt-bindings: net: convert sff,sfp to dtschema This patch set converts the sff,sfp to dtschema. The first patch does a somewhat mechanical conversion without changing anything else beside the format in which the dt binding is presented. In the second patch we rename some dt nodes to be generic. The last two patches change the GPIO related properties so that they uses the -gpios preferred suffix. This way, all the DTBs are passing the validation against the sff,sfp.yaml binding. ==================== Link: https://lore.kernel.org/r/20220707091437.446458-1-ioana.ciornei@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ioana Ciornei authored
Rename the GPIO related sfp properties to include the preffered -gpios suffix. Also, with this change the dtb_check will no longer complain when trying to verify the DTS against the sff,sfp.yaml binding. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ioana Ciornei authored
Rename the 'mod-def0-gpio' property to 'mod-def0-gpios' so that we use the preferred -gpios suffix. Also, with this change the dtb_check will not complain when trying to verify the DTS against the sff,sfp.yaml binding. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ioana Ciornei authored
Rename the dt nodes shown in the sff,sfp.yaml examples so that they are generic and not really tied to a specific platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ioana Ciornei authored
Convert the sff,sfp.txt bindings to the DT schema format. Also add the new path to the list of maintained files. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 12 Jul, 2022 18 commits
-
-
Zhengchao Shao authored
The type of ip_route_input_rcu should be static. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220711073549.8947-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Moshe Shemesh Says: =================== 1) Fix devlink lock in mlx5 devlink eswitch callbacks Following the commit 14e426bf "devlink: hold the instance lock during eswitch_mode callbacks" which takes devlink instance lock for all devlink eswitch callbacks and adds a temporary workaround, this patchset removes the workaround, replaces devlink API functions by devl_ API where called from mlx5 driver eswitch callbacks flows and adds devlink instance lock in other driver's path that leads to these functions. While moving to devl_ API the patchset removes part of the devlink API functions which mlx5 was the last one to use and so not used by any driver now. The patchset also remove DEVLINK_NL_FLAG_NO_LOCK flag from the callbacks of port_new/port which are called only from mlx5 driver and the already locked by the patchset as parallel paths to the eswitch callbacks using devl_ API functions. This patchset will be followed by another patchset that will remove DEVLINK_NL_FLAG_NO_LOCK flag from devlink reload and devlink health callbacks. Thus we will have all devlink callbacks locked and it will pave the way to remove devlink mutex. =================== Link: https://lore.kernel.org/r/20220711081408.69452-1-saeed@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
Let the core take the devlink instance lock around port_new and port_del callbacks and remove the now redundant locking in the only driver that currently use them. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
The callback mlx5_devlink_eswitch_mode_set() had unlocked devlink as a temporary workaround once devlink instance lock was added to devlink eswitch callbacks. Now that all flows triggered by this function that took devlink lock are using devl_ API and all parallel paths are locked we can remove this workaround. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
As part of the flows invoked by mlx5_devlink_eswitch_mode_set() get to mlx5_rescan_drivers_locked() which can call mlx5e_probe()/mlx5e_remove and register/unregister mlx5e driver ports accordingly. This can lead to deadlock once mlx5_devlink_eswitch_mode_set() will use devlink lock. Use devl_port_register/unregister() instead of devlink_port_register/unregister() and add devlink instance locks in the driver paths to this function to have it locked while calling devl_ API function. If remove or probe were called by module init or module cleanup flows, need to lock devlink just before calling devl_port_register(), otherwise it is called by attach/detach or register/unregister flow and we can have the flow locked. Added flag to distinguish between these cases. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink locked. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
The previous patch removed the last usage of the functions devlink_rate_leaf_create() and devlink_rate_nodes_destroy(). Thus, remove these function from devlink API. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
The function mlx5_esw_devlink_sf_port_register() calls devlink_port_register() and devlink_rate_leaf_create(). Use devl_ API to call devl_port_register() and devl_rate_leaf_create() accordingly and add devlink instance lock in driver paths to this function. Similarly, use devl_ API to call devl_port_unregister() and devl_rate_leaf_destroy() in mlx5_esw_devlink_sf_port_unregister() and ensure locking devlink instance lock on all the paths to this function too. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink lock held. Note this patch is taking devlink lock on mlx5_devlink_sf_port_new/del() which are devlink callbacks for port_new/del(). We will take these locks off once these callbacks will be locked by devlink too. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
The function mlx5_esw_offloads_devlink_port_register() calls devlink_port_register() and devlink_rate_leaf_create(). Use devl_ API to call devl_port_register() and devl_rate_leaf_create() accordingly and add devlink instance lock in driver paths to this function. Similarly, use devl_ API to call devl_port_unregister() and devl_rate_leaf_destroy() in mlx5_esw_offloads_devlink_port_unregister() and ensure locking devlink instance lock on the paths to this function too. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink lock held. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
The previous patch removed the last usage of the function devlink_rate_nodes_destroy(). Thus, remove this function from devlink API. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
Use devl_rate_nodes_destroy() instead of devlink_rate_nodes_destroy(). Add devlink instance lock in the driver paths to this function to have it locked while calling devl_ API function. This will be used by the downstream patch to invoke mlx5_devlink_eswitch_mode_set() with devlink lock held. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Moshe Shemesh authored
The function mlx5_eswtich_mode_callback_enter() was added as a temporary workaround once devlink instance lock was added to devlink eswitch callbacks. However, code review and testing show that all the callbacks part to eswitch_mode_set don't take devlink instance lock in any flow and so unlocking devlink instance lock while entering these functions is not needed. Remove devl_lock from mlx5_eswtich_mode_callback_enter() and devl_unlock from mlx5_eswtich_mode_callback_exit(). Also remove the functions mlx5_eswtich_mode_callback_enter()/exit() as they are not needed any more. The callback eswitch_mode_set will be treated separately in the following patches. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Justin Stitt authored
When building with Clang we encounter the following warning: | drivers/net/ethernet/amd/xgbe/xgbe-dcb.c:234:42: error: format specifies | type 'unsigned char' but the argument has type '__u16' (aka 'unsigned | short') [-Werror,-Wformat] pfc->pfc_cap, pfc->pfc_en, pfc->mbc, | pfc->delay); pfc->pfc_cap , pfc->pfc_cn, pfc->mbc are all of type `u8` while pfc->delay is of type `u16`. The correct format specifiers `%hh[u|x]` were used for the first three but not for pfc->delay, which is causing the warning above. Variadic functions (printf-like) undergo default argument promotion. Documentation/core-api/printk-formats.rst specifically recommends using the promoted-to-type's format flag. In this case `%d` (or `%x` to maintain hex representation) should be used since both u8's and u16's are fully representable by an int. Moreover, C11 6.3.1.1 states: (https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int can represent all values of the original type ..., the value is converted to an int; otherwise, it is converted to an unsigned int. These are called the integer promotions.` Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220708232653.556488-1-justinstitt@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/7f795bd6d5b2a00f581175b7069b229c2e5a4192.1657379127.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/c7bf099af07eb497b02d195906ee8c11fea3b3bd.1657377335.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christophe JAILLET authored
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/8306e2ae69a5d8553691f5d10a86a4390daf594b.1657376651.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tls: rx: follow-ups to NoPad A few fixes for issues spotted by Maxim. ==================== Link: https://lore.kernel.org/r/20220709025255.323864-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Make sure setsockopt / getsockopt behave as expected. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Maxim reports do_tls_getsockopt_no_pad() will always return an error. Indeed looks like refactoring gone wrong - remove err and use value. Reported-by: Maxim Mikityanskiy <maximmi@nvidia.com> Fixes: 88527790 ("tls: rx: add sockopt for enabling optimistic decrypt with TLS 1.3") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-