- 25 Aug, 2021 4 commits
-
-
Colin Ian King authored
There is a spelling mistake in a SNIC_HOST_INFO message. Fix it. Link: https://lore.kernel.org/r/20210820151835.59804-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210820095405.12801-4-hare@suse.deReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Hannes Reinecke authored
ncr_reset_bus() will complete all outstanding commands anyway, so there's no need to single out a specific command. Link: https://lore.kernel.org/r/20210820095405.12801-3-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Always '1', so we can remove it. Link: https://lore.kernel.org/r/20210820095405.12801-2-hare@suse.deReviewed-by:
-
- 24 Aug, 2021 17 commits
-
-
Masahiro Yamada authored
Add FORCE so that if_changed can detect the command line change. scsi_devinfo_tbl.c must be added to 'targets' too. Link: https://lore.kernel.org/r/20210819012339.709409-1-masahiroy@kernel.orgSigned-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
John Garry authored
Use scsi_cmd_to_rq(cmd)->tag instead of scsi_cmnd.tag as preference. Link: https://lore.kernel.org/r/1629294801-32102-2-git-send-email-john.garry@huawei.comReviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Hannes Reinecke authored
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_device_reset(), and remove the now obsolete function __qla2xxx_eh_generic_reset(). No functional changes. Link: https://lore.kernel.org/r/20210819091913.94436-4-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Hannes Reinecke authored
Device reset and target reset will be using different calling sequences, so open-code __qla2xxx_eh_generic_reset() in qla2xxx_eh_target_reset(). No functional changes. Link: https://lore.kernel.org/r/20210819091913.94436-3-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by:
-
Hannes Reinecke authored
When calling bus reset the driver will be doing a full SAN resync, so there is no need to wait for any pending RSCNs; they'll be re-issued during resync anyway. Link: https://lore.kernel.org/r/20210819091913.94436-2-hare@suse.de Cc: Nilesh Javali <njavali@marvell.com> Reviewed-by:
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20210817051315.2477-13-njavali@marvell.comSigned-off-by:
-
kernel test robot authored
drivers/scsi/qla2xxx/qla_edif.c:213:25-29: Unneeded variable: "rval". Return "0" on line 264 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Link: https://lore.kernel.org/r/20210817051315.2477-12-njavali@marvell.com Fixes: 7ebb336e ("scsi: qla2xxx: edif: Add start + stop bsgs") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Quinn Tran authored
When Target port transitions personality from one to another (NVMe <--> FCP), there could be some overlap of the two where one layer is going down while the other layer is coming up. This overlap can cause temporary I/O error. Detect those errors/transitions and recover from them. Triggers session tear down and allow relogin to re-drive the connection under the following conditions: - NVMe command error - On PRLO + N2N (rida format 2) Link: https://lore.kernel.org/r/20210817051315.2477-11-njavali@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
For target port that register itself as both FCP + NVMe, initiator driver will try to login one mode at a time. If the last mode did not succeed, then driver will try the other mode. When error is encountered, current code only flip to other mode one time (NVMe->FCP) and remain on the last mode. Driver wrongly assumed target port does not support PRLI NVMe, instead it was not ready to receive PRLI. This patch will alternate back and forth on every PRLI failure until login retry count has depleted or it is succeeded. Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.comSigned-off-by:
-
Arun Easi authored
The abort callback gets called only when it gets posted to firmware. The refcounting is done properly in the callback. On internal errors, the callback is not invoked leading to a hung I/O. Fix this by having separate error code when command gets returned from firmware. Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.comSigned-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Quinn Tran authored
Currently driver saves the personality type (FCP|NVMe) at the start of first discovery of the remote device. If the remote device personality do change over time, then qla driver needs to present that to user to decide. Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
For initiator mode, always do secure login when authentication app started. Also remove redundant flags to indicate secure connection. Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will pause after PLOGI to allow app to authenticate. Once authentication completes, app will tell driver to do PRLI. Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.comSigned-off-by:
-
Arun Easi authored
The following hung task call trace was seen: [ 1230.183294] INFO: task qla2xxx_wq:523 blocked for more than 120 seconds. [ 1230.197749] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1230.205585] qla2xxx_wq D 0 523 2 0x80004000 [ 1230.205636] Workqueue: qla2xxx_wq qlt_free_session_done [qla2xxx] [ 1230.205639] Call Trace: [ 1230.208100] __schedule+0x2c4/0x700 [ 1230.211607] schedule+0x38/0xa0 [ 1230.214769] schedule_timeout+0x246/0x2f0 [ 1230.222651] wait_for_completion+0x97/0x100 [ 1230.226921] qlt_free_session_done+0x6a0/0x6f0 [qla2xxx] [ 1230.232254] process_one_work+0x1a7/0x360 ...when device side port resets were done. Abort threads were getting out without processing due to the "deleted" flag check. The delete thread, meanwhile, could not proceed with a logout (that would have cleared out pending requests) as the logout IOCB work was not progressing. It appears like the hung qlt_free_session_done() thread is causing the ha->wq works on hold. The qlt_free_session_done() was hung waiting for nvme_fc_unregister_remoteport() + localport_delete cb to be complete, which would only happen when all I/Os are released. Fix this by allowing abort to progress until device delete is completely done. This should make the qlt_free_session_done() proceed without hang and thus clear up the deadlock. Link: https://lore.kernel.org/r/20210817051315.2477-5-njavali@marvell.comSigned-off-by: -
Quinn Tran authored
edif_enabled is prematurely turned on if hardware is capable of handling the feature. However, firmware also needs to support EDIF before enabling this bit. Link: https://lore.kernel.org/r/20210817051315.2477-4-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
Reject inflight AUTH ELS if driver is going through session recovery. Link: https://lore.kernel.org/r/20210817051315.2477-3-njavali@marvell.comSigned-off-by:
-
Quinn Tran authored
When firmware indicates session has been torn down via UPDATE SA IOCB or ELS Passthrough IOCB, the driver needs to also tear down the session. Link: https://lore.kernel.org/r/20210817051315.2477-2-njavali@marvell.comSigned-off-by:
-
- 18 Aug, 2021 8 commits
-
-
Christian Loehle authored
The sd_spinup_disk() function logs what is happening. Unfortunately this output stops if the media was marked as removed in the meantime. Add a print for this case too. Link: https://lore.kernel.org/r/CWXP265MB26803209FD08A64222EEEA02C4FD9@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COMReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Christian Loehle <cloehle@hyperstone.com> Signed-off-by:
-
Hannes Reinecke authored
The initial device scan might take some time, and there really is no need to wait for it during probe(). So return immediately from scsi_scan_host() during probe() and avoid any udev stalls during booting. Link: https://lore.kernel.org/r/20210817075306.11315-1-mwilck@suse.comAcked-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Sergey Samoylenko authored
TCM fails to pass the following tests in libiscsi: SCSI.ExtendedCopy.DescrType SCSI.ExtendedCopy.DescrLimits SCSI.ExtendedCopy.ParamHdr SCSI.ExtendedCopy.ValidSegDescr SCSI.ExtendedCopy.ValidTgtDescr The xcopy code always returns the same NOT READY sense key for all detected errors. Change the sense key for invalid requests to ILLEGAL REQUEST, and for aborted transfers to COPY ABORTED. Link: https://lore.kernel.org/r/20210803145410.80147-3-s.samoylenko@yadro.com Fixes: d877d727 ("target: Fix a deadlock between the XCOPY code and iSCSI session shutdown") Reviewed-by:
David Disseldorp <ddiss@suse.de> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by:
-
Sergey Samoylenko authored
Currently, backend drivers can fail I/O with SAM_STAT_CHECK_CONDITION which gets us TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE. Add a new helper that allows backend drivers to fail with specific sense codes. This is based on a patch from Mike Christie <michael.christie@oracle.com>. Cc: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20210803145410.80147-2-s.samoylenko@yadro.comReviewed-by:
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code a bit according to the use of a flexible-array member in struct pqi_event_config instead of a one-element array, and use the struct_size() helper. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/r/20210810210741.GA58765@embeddedorSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Tuo Li authored
The return value of transport_kmap_data_sg() is assigned to the variable buf: buf = transport_kmap_data_sg(cmd); And then it is checked: if (!buf) { This indicates that buf can be NULL. However, it is dereferenced in the following statements: if (!(buf[3] & 0x80)) buf[3] |= 0x80; if (!(buf[2] & 0x80)) buf[2] |= 0x80; To fix these possible null-pointer dereferences, dereference buf and call transport_kunmap_data_sg() only when buf is not NULL. Link: https://lore.kernel.org/r/20210810040414.248167-1-islituo@gmail.comReported-by:TOTE Robot <oslab@tsinghua.edu.cn> Reviewed-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
Tuo Li <islituo@gmail.com> Signed-off-by:
-
John Garry authored
It is never read, so get rid of it. Link: https://lore.kernel.org/r/1628862553-179450-4-git-send-email-john.garry@huawei.comReviewed-by:
-
John Garry authored
Use scsi_cmd_to_rq(scsi_cmnd)->tag in preference to scsi_cmnd.tag. Link: https://lore.kernel.org/r/1629207817-211936-1-git-send-email-john.garry@huawei.comSigned-off-by:
-
- 16 Aug, 2021 5 commits
-
-
John Garry authored
It is never read. Setting it and the request tag seems dodgy anyway. Link: https://lore.kernel.org/r/1628862553-179450-3-git-send-email-john.garry@huawei.comReviewed-by:
-
John Garry authored
Use scsi_cmd_to_rq(cmd)->tag instead. Link: https://lore.kernel.org/r/1628862553-179450-2-git-send-email-john.garry@huawei.comReviewed-by:
-
Dan Carpenter authored
This driver has some left over "return 1" on failure style code mixed with "return negative error codes" style code. The caller doesn't care so we should just convert everything to return negative error codes. Then there was a problem that there were two variables used to store error codes which just resulted in confusion. If qedf_alloc_bdq() returned a negative error code, we accidentally returned success instead of propagating the error code. So get rid of the "rc" variable and use "status" every where. Also remove the "status = 0" initialization so that these sorts of bugs will be detected by the compiler in the future. Link: https://lore.kernel.org/r/20210810085023.GA23998@kili Fixes: 61d8658b ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Acked-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
This function had some left over code that returned 1 on error instead negative error codes. Convert everything to use negative error codes. The caller treats all non-zero returns the same so this does not affect run time. A couple places set "rc" instead of "status" so those error paths ended up returning success by mistake. Get rid of the "rc" variable and use "status" everywhere. Remove the bogus "status = 0" initialization, as a future proofing measure so the compiler will warn about uninitialized error codes. Link: https://lore.kernel.org/r/20210810084753.GD23810@kili Fixes: ace7f46b ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by:
-
Dan Carpenter authored
Return -EINVAL on failure instead of success. Link: https://lore.kernel.org/r/20210810084613.GB23810@kili Fixes: a91aaae0 ("scsi: smartpqi: allow for larger raid maps") Signed-off-by:
-
- 13 Aug, 2021 1 commit
-
-
Martin K. Petersen authored
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags Link: https://lore.kernel.org/r/20210806040023.5355-4-martin.petersen@oracle.com Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Acked-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
-
- 12 Aug, 2021 5 commits
-
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20210810043720.1137-15-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Saurav Kashyap authored
The first invocation of function find_first_zero_bit will return 0 and queue_id gets set to 0. An index of queue_pair_map also gets set to 0. qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs); set_bit(qpair_id, ha->qpair_qid_map); ha->queue_pair_map[qpair_id] = qpair; In the alloc_queue callback driver checks the map, if queue is already allocated: ha->queue_pair_map[qidx] This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8) since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus is less than 8, max_qpairs is less than 8. This creates wrong value returned as qpair. [ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2 [ 1572.354458] general protection fault: 0000 [#1] SMP PTI [ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1 [ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013 [ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn [ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx] [ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0 [ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246 [ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001 [ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800 [ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800 [ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000 [ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000 [ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000 [ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0 [ 1572.354497] Call Trace: [ 1572.354503] ? check_preempt_curr+0x62/0x90 [ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0 [ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc] [ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730 [ 1572.354515] ? __switch_to_asm+0x35/0x70 [ 1572.354516] ? __switch_to_asm+0x41/0x70 [ 1572.354518] ? __switch_to_asm+0x35/0x70 [ 1572.354519] ? __switch_to_asm+0x41/0x70 [ 1572.354521] ? __switch_to_asm+0x35/0x70 [ 1572.354522] ? __switch_to_asm+0x41/0x70 [ 1572.354523] ? __switch_to_asm+0x35/0x70 [ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca [ 1572.354527] ? __switch_to_asm+0x41/0x70 [ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170 [ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60 [ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0 [ 1572.354535] ? process_one_work+0x1a7/0x360 [ 1572.354537] ? create_worker+0x1a0/0x1a0 [ 1572.354538] ? worker_thread+0x30/0x390 [ 1572.354540] ? create_worker+0x1a0/0x1a0 [ 1572.354541] ? kthread+0x116/0x130 [ 1572.354543] ? kthread_flush_work_fn+0x10/0x10 [ 1572.354545] ? ret_from_fork+0x35/0x40 Fix is to use index 0 for admin and first IO queue. Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com Fixes: e84067d7 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by:Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
The MSI-X and MSI calls fails in kdump kernel. Because of this qla2xxx_create_qpair() fails leading to .create_queue callback failure. The fix is to return existing qpair instead of allocating new one and allocate a single hw queue. [ 19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support, giving up -- 16/-28. [ 19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode -- ret=-28. [ 19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode -- ret=-28. .. .. .. [ 21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle 00000000e7ee499d, idx =1, qsize 32 [ 21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable. [ 21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair [ 21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22) [ 21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: -
Saurav Kashyap authored
Avoid allocating firmware dump and only allocate a single queue for a kexec kernel. Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
Suppress logging of retryable errors. These can still be seen if extended logging is enabled. Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.comReviewed-by:
-
