- 11 Sep, 2013 40 commits
-
-
Rob Landley authored
Conditionally call the appropriate fs_init function and fill_super functions. Add a use once guard to shmem_init() to simply succeed on a second call. (Note that IS_ENABLED() is a compile time constant so dead code elimination removes unused function calls when CONFIG_TMPFS is disabled.) Signed-off-by:
Rob Landley <rob@landley.net> Cc: Jeff Layton <jlayton@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen Warren <swarren@nvidia.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rob Landley authored
When the rootfs code was a wrapper around ramfs, having them in the same file made sense. Now that it can wrap another filesystem type, move it in with the init code instead. This also allows a subsequent patch to access rootfstype= command line arg. Signed-off-by:
-
Rob Landley authored
Even though ramfs hasn't got a backing device, commit e0bf68dd ("mm: bdi init hooks") added one anyway, and put the initialization in init_rootfs() since that's the first user, leaving it out of init_ramfs() to avoid duplication. But initmpfs uses init_tmpfs() instead, so move the init into the filesystem's init function, add a "once" guard to prevent duplicate initialization, and call the filesystem init from rootfs init. This goes part of the way to allowing ramfs to be built as a module. [akpm@linux-foundation.org; using bit 1 was odd] Signed-off-by:
-
Rob Landley authored
Mounting MS_NOUSER prevents --bind mounts from rootfs. Prevent new rootfs mounts with a different mechanism that doesn't affect bind mounts. Signed-off-by:
-
Jan Kara authored
With users of radix_tree_preload() run from interrupt (block/blk-ioc.c is one such possible user), the following race can happen: radix_tree_preload() ... radix_tree_insert() radix_tree_node_alloc() if (rtp->nr) { ret = rtp->nodes[rtp->nr - 1]; <interrupt> ... radix_tree_preload() ... radix_tree_insert() radix_tree_node_alloc() if (rtp->nr) { ret = rtp->nodes[rtp->nr - 1]; And we give out one radix tree node twice. That clearly results in radix tree corruption with different results (usually OOPS) depending on which two users of radix tree race. We fix the problem by making radix_tree_node_alloc() always allocate fresh radix tree nodes when in interrupt. Using preloading when in interrupt doesn't make sense since all the allocations have to be atomic anyway and we cannot steal nodes from process-context users because some users rely on radix_tree_insert() succeeding after radix_tree_preload(). in_interrupt() check is somewhat ugly but we cannot simply key off passed gfp_mask as that is acquired from root_gfp_mask() and thus the same for all preload users. Another part of the fix is to avoid node preallocation in radix_tree_preload() when passed gfp_mask doesn't allow waiting. Again, preallocation in such case doesn't make sense and when preallocation would happen in interrupt we could possibly leak some allocated nodes. However, some users of radix_tree_preload() require following radix_tree_insert() to succeed. To avoid unexpected effects for these users, radix_tree_preload() only warns if passed gfp mask doesn't allow waiting and we provide a new function radix_tree_maybe_preload() for those users which get different gfp mask from different call sites and which are prepared to handle radix_tree_insert() failure. Signed-off-by:Jan Kara <jack@suse.cz> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Jingoo Han authored
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by:
-
Maxim Levitsky authored
Based partially on MS standard spec quotes from Alex Dubov. As any code that works with user data this driver isn't recommended to use to write cards that contain valuable data. It tries its best though to avoid data corruption and possible damage to the card. Tested on MS DUO 64 MB card on Ricoh R592 card reader. Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alex Dubov <oakad@yahoo.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
-
Joe Perches authored
Fix thinkos where pkt_<level> needs a valid pktcdvd_device * and the pointer is known to be NULL. Signed-off-by:
Joe Perches <joe@perches.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (go smatch!) Signed-off-by:
-
Joe Perches authored
Allow the device name to be emitted with pkt_err when logging the sense data. Signed-off-by:
-
Joe Perches authored
Add a new pkt_info macro to prefix the name to the logging output. Signed-off-by:
-
Joe Perches authored
Add a new pkt_notice macro to prefix the name to the logging output. Signed-off-by:
-
Joe Perches authored
Add a new pkt_err macro to prefix the name to the logging output. Convert pr_err where there is a non-null struct pktcdvd_device. Includes improvements from Andy Shevchenko. Signed-off-by:
-
Joe Perches authored
Add pd->name to output for these debugging messages. Remove normally compiled out pkt_dbg(2, ...) function entry tracing equivalents as it's better done via the function tracer. Signed-off-by:
-
Joe Perches authored
Use the more common pkt_dbg(level, fmt, ...) form. These messages are emitted at KERN_NOTICE. Always emit function name with pkt_dbg(2, ...) uses and remove the sometimes abbreviated embedded function name. This form always verifies the format and arguments. Signed-off-by:
-
Joe Perches authored
Use a more current logging style and add messages levels to the logging messages. Simplify pkt_dump_sense by using %*ph and adding a simple function to emit the sense string. Includes improvements from Andy Shevchenko and Dan Carpenter. Signed-off-by:
-
Joe Perches authored
Macros should be converted to functions where feasible to verify arguments and the like. Signed-off-by:
-
Kees Cook authored
Since the panic handlers may produce additional information (via printk) for the kernel log, it should be reported as part of the panic output saved by kmsg_dump(). Without this re-ordering, nothing that adds information to a panic will show up in pstore's view when kmsg_dump runs, and is therefore not visible to crash reporting tools that examine pstore output. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Acked-by:
Tony Luck <tony.luck@intel.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Vikram Mulukutla <markivx@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Dan Carpenter authored
It seems pretty unlikely that AFFS supports files over 4GB but we may as well leave use loff_t just for cleanness sake instead of truncating it to 32 bits. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ed Cashin authored
When the example udev rules in the documentation are used without modification, warnings like the one shown below appear in the system logs: /var/log/messages:Aug 22 11:09:11 kung udevd[445]: NAME="%k" \ is superfluous and breaks kernel supplied names, please remove \ it from /etc/udev/rules.d/60-aoe.rules:26 Removing the term does not cause any problems with the creation of the special character and block device nodes. Signed-off-by:Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Ed Cashin authored
If the system has trouble allocating memory for the creation of the aoe debugfs directory or of a file inside it, the debugfs member of an aoedev can be NULL. Do not treat a NULL debugfs pointer as a BUG on aoedev shutdown, avoiding the user impact of an unecessary panic. Signed-off-by:
-
Andy Shevchenko authored
This patch fixes following compiler warnings: drivers/block/aoe/aoecmd.c: In function `aoecmd_ata_rw': drivers/block/aoe/aoecmd.c:383:17: warning: variable `t' set but not used [-Wunused-but-set-variable] struct aoetgt *t; ^ drivers/block/aoe/aoecmd.c: In function `resend': drivers/block/aoe/aoecmd.c:488:21: warning: variable `ah' set but not used [-Wunused-but-set-variable] struct aoe_atahdr *ah; ^ Signed-off-by:Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ed Cashin <ecashin@coraid.com> Signed-off-by:
-
Andy Shevchenko authored
In the kernel we have a nice helper that may be used here. This patch substitutes the custom implementation by the native function call. Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
This information is presented in a compact format that has evolved for easy routine scanning by expert humans, mostly developers and support technicians helping to troubleshoot or test AoE-based systems. Signed-off-by:
-
Ed Cashin authored
The place holder in the file contents is filled out in the following patch. Signed-off-by:
-
Ed Cashin authored
Signed-off-by:
-
Ed Cashin authored
This series adds the debugging information that the coraid.com-distributed aoe driver exports via sysfs, but instead of sysfs, it uses debugfs. With these patches applied, even without AoE targets on the network, KEDR reports new possible memory leaks, but these are from callers outside the aoe driver that have used aoe_devnode to get the name of the character devices through the aoe_class->devnode callback, and I believe they're responsible for freeing that memory. This patch: Create and destroy the debugfs directory. Signed-off-by:
-
Cody P Schafer authored
Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Reviewed-by:
Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
-
Cody P Schafer authored
No reason require rbtree test code to be a module, allow it to be builtin (streamlines my development process) Signed-off-by:
-
Cody P Schafer authored
Just check that we examine all nodes in the tree for the postorder iteration. Signed-off-by:
-
Cody P Schafer authored
Because deletion (of the entire tree) is a relatively common use of the rbtree_postorder iteration, and because doing it safely means fiddling with temporary storage, provide a helper to simplify postorder rbtree iteration. Signed-off-by:
-
Cody P Schafer authored
Postorder iteration yields all of a node's children prior to yielding the node itself, and this particular implementation also avoids examining the leaf links in a node after that node has been yielded. In what I expect will be its most common usage, postorder iteration allows the deletion of every node in an rbtree without modifying the rbtree nodes (no _requirement_ that they be nulled) while avoiding referencing child nodes after they have been "deleted" (most commonly, freed). I have only updated zswap to use this functionality at this point, but numerous bits of code (most notably in the filesystem drivers) use a hand rolled postorder iteration that NULLs child links as it traverses the tree. Each of those instances could be replaced with this common implementation. 1 & 2 add rbtree postorder iteration functions. 3 adds testing of the iteration to the rbtree runtime tests 4 allows building the rbtree runtime tests as builtins 5 updates zswap. This patch: Add postorder iteration functions for rbtree. These are useful for safely freeing an entire rbtree without modifying the tree at all. Signed-off-by:
-
Andrew Morton authored
Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Karel Zak <kzak@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Davidlohr Bueso authored
Trivial coding style cleanups - still plenty left. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Reviewed-by:
Karel Zak <kzak@redhat.com> Acked-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Davidlohr Bueso authored
I love emacs, but these settings for coding style are annoying when trying to open the efi.h file. More important, we already have checkpatch for that. Signed-off-by:
-
Davidlohr Bueso authored
When verifying GPT header integrity, make sure that first usable LBA is smaller than last usable LBA. Signed-off-by:
-
