Merge tag 'kvm-s390-next-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- Memop selftest rotate fix
- SCLP event bits over indication fix
- Missing virt_to_phys for the CRYCB fix

KVM Xen and pfncache changes for 6.9:

 - Rip out the half-baked support for using gfn_to_pfn caches to manage pages
   that are "mapped" into guests via physical addresses.

 - Add support for using gfn_to_pfn caches with only a host virtual address,
   i.e. to bypass the "gfn" stage of the cache.  The primary use case is
   overlay pages, where the guest may change the gfn used to reference the
   overlay page, but the backing hva+pfn remains the same.

 - Add an ioctl() to allow mapping Xen's shared_info page using an hva instead
   of a gpa, so that userspace doesn't need to reconfigure and invalidate the
   cache/mapping if the guest changes the gpa (but userspace keeps the resolved
   hva the same).

 - When possible, use a single host TSC value when computing the deadline for
   Xen timers in order to improve the accuracy of the timer emulation.

 - Inject pending upcall events when the vCPU software-enables its APIC to fix
   a bug where an upcall can be lost (and to follow Xen's behavior).

 - Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
   events fails, e.g. if the guest has aliased xAPIC IDs.

 - Extend gfn_to_pfn_cache's mutex to cover (de)activation (in addition to
   refresh), and drop a now-redundant acquisition of xen_lock (that was
   protecting the shared_info cache) to fix a deadlock due to recursively
   acquiring xen_lock.

KVM x86 PMU changes for 6.9:

 - Fix several bugs where KVM speciously prevents the guest from utilizing
   fixed counters and architectural event encodings based on whether or not
   guest CPUID reports support for the _architectural_ encoding.

 - Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
   priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.

 - Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
   and a variety of other PMC-related behaviors that depend on guest CPUID,
   i.e. are difficult to validate via KVM-Unit-Tests.

 - Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
   cycles, e.g. when checking if a PMC event needs to be synthesized when
   skipping an instruction.

 - Optimize triggering of emulated events, e.g. for "count instructions" events
   when skipping an instruction, which yields a ~10% performance improvement in
   VM-Exit microbenchmarks when a vPMU is exposed to the guest.

 - Tighten the check for "PMI in guest" to reduce false positives if an NMI
   arrives in the host while KVM is handling an IRQ VM-Exit.

KVM VMX changes for 6.9:

 - Fix a bug where KVM would report stale/bogus exit qualification information
   when exiting to userspace due to an unexpected VM-Exit while the CPU was
   vectoring an exception.

 - Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.

 - Clean up the logic for massaging the passthrough MSR bitmaps when userspace
   changes its MSR filter.

KVM x86 MMU changes for 6.9:

 - Clean up code related to unprotecting shadow pages when retrying a guest
   instruction after failed #PF-induced emulation.

 - Zap TDP MMU roots at 4KiB granularity to minimize the delay in yielding if
   a reschedule is needed, e.g. if a high priority task needs to run.  Because
   KVM doesn't support yielding in the middle of processing a zapped non-leaf
   SPTE, zapping at 1GiB granularity can result in multi-millisecond lag when
   attempting to schedule in a high priority.

 - Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
   read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.

 - Allocate write-tracking metadata on-demand to avoid the memory overhead when
   running kernels built with KVMGT support (external write-tracking enabled),
   but for workloads that don't use nested virtualization (shadow paging) or
   KVMGT.

KVM x86 misc changes for 6.9:

 - Explicitly initialize a variety of on-stack variables in the emulator that
   triggered KMSAN false positives (though in fairness in KMSAN, it's comically
   difficult to see that the uninitialized memory is never truly consumed).

 - Fix the deubgregs ABI for 32-bit KVM, and clean up code related to reading
   DR6 and DR7.

 - Rework the "force immediate exit" code so that vendor code ultimately
   decides how and when to force the exit.  This allows VMX to further optimize
   handling preemption timer exits, and allows SVM to avoid sending a duplicate
   IPI (SVM also has a need to force an exit).

 - Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
   vCPU creation ultimately failed, and add WARN to guard against similar bugs.

 - Provide a dedicated arch hook for checking if a different vCPU was in-kernel
   (for directed yield), and simplify the logic for checking if the currently
   loaded vCPU is in-kernel.

 - Misc cleanups and fixes.

KVM common MMU changes for 6.9:

  - Harden KVM against underflowing the active mmu_notifier invalidation
    count, so that "bad" invalidations (usually due to bugs elsehwere in the
    kernel) are detected earlier and are less likely to hang the kernel.

  - Fix a benign bug in __kvm_mmu_topup_memory_cache() where the object size
    and number of objects parameters to kvmalloc_array() were swapped.

KVM async page fault changes for 6.9:

 - Always flush the async page fault workqueue when a work item is being
   removed, especially during vCPU destruction, to ensure that there are no
   workers running in KVM code when all references to KVM-the-module are gone,
   i.e. to prevent a use-after-free if kvm.ko is unloaded.

 - Grab a reference to the VM's mm_struct in the async #PF worker itself instead
   of gifting the worker a reference, e.g. so that there's no need to remember
   to *conditionally* clean up after the worker.

KVM selftests changes for 6.9:

 - Add macros to reduce the amount of boilerplate code needed to write "simple"
   selftests, and to utilize selftest TAP infrastructure, which is especially
   beneficial for KVM selftests with multiple testcases.

 - Add basic smoke tests for SEV and SEV-ES, along with a pile of library
   support for handling private/encrypted/protected memory.

 - Fix benign bugs where tests neglect to close() guest_memfd files.

KVM/riscv changes for 6.9

- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM

KVM/arm64 updates for 6.9

 - Infrastructure for building KVM's trap configuration based on the
   architectural features (or lack thereof) advertised in the VM's ID
   registers

 - Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
   x86's WC) at stage-2, improving the performance of interacting with
   assigned devices that can tolerate it

 - Conversion of KVM's representation of LPIs to an xarray, utilized to
   address serialization some of the serialization on the LPI injection
   path

 - Support for _architectural_ VHE-only systems, advertised through the
   absence of FEAT_E2H0 in the CPU's ID register

 - Miscellaneous cleanups, fixes, and spelling corrections to KVM and
   selftests

Merge tag 'loongarch-kvm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.9

* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.

KVM GUEST_MEMFD fixes for 6.8:

 - Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
   avoid creating ABI that KVM can't sanely support.

 - Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
   clear that such VMs are purely a development and testing vehicle, and
   come with zero guarantees.

 - Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
   is to support confidential VMs with deterministic private memory (SNP
   and TDX) only in the TDP MMU.

 - Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
   when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.

* kvm-arm64/kerneldoc:
  : kerneldoc warning fixes, courtesy of Randy Dunlap
  :
  : Fixes addressing the widespread misuse of kerneldoc-style comments
  : throughout KVM/arm64.
  KVM: arm64: vgic: fix a kernel-doc warning
  KVM: arm64: vgic-its: fix kernel-doc warnings
  KVM: arm64: vgic-init: fix a kernel-doc warning
  KVM: arm64: sys_regs: fix kernel-doc warnings
  KVM: arm64: PMU: fix kernel-doc warnings
  KVM: arm64: mmu: fix a kernel-doc warning
  KVM: arm64: vhe: fix a kernel-doc warning
  KVM: arm64: hyp/aarch32: fix kernel-doc warnings
  KVM: arm64: guest: fix kernel-doc warnings
  KVM: arm64: debug: fix kernel-doc warnings
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/vfio-normal-nc:
  : Normal-NC support for vfio-pci @ stage-2, courtesy of Ankit Agrawal
  :
  : KVM's policy to date has been that any and all MMIO mapping at stage-2
  : is treated as Device-nGnRE. This is primarily done due to concerns of
  : the guest triggering uncontainable failures in the system if they manage
  : to tickle the device / memory system the wrong way, though this is
  : unnecessarily restrictive for devices that can be reasoned as 'safe'.
  :
  : Unsurprisingly, the Device-* mapping can really hurt the performance of
  : assigned devices that can handle Gathering, and can be an outright
  : correctness issue if the guest driver does unaligned accesses.
  :
  : Rather than opening the floodgates to the full ecosystem of devices that
  : can be exposed to VMs, take the conservative approach and allow PCI
  : devices to be mapped as Normal-NC since it has been determined to be
  : 'safe'.
  vfio: Convey kvm that the vfio-pci device is wc safe
  KVM: arm64: Set io memory s2 pte as normalnc for vfio pci device
  mm: Introduce new flag to indicate wc safe
  KVM: arm64: Introduce new flag for non-cacheable IO memory
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/lpi-xarray:
  : xarray-based representation of vgic LPIs
  :
  : KVM's linked-list of LPI state has proven to be a bottleneck in LPI
  : injection paths, due to lock serialization when acquiring / releasing a
  : reference on an IRQ.
  :
  : Start the tedious process of reworking KVM's LPI injection by replacing
  : the LPI linked-list with an xarray, leveraging this to allow RCU readers
  : to walk it outside of the spinlock.
  KVM: arm64: vgic: Don't acquire the lpi_list_lock in vgic_put_irq()
  KVM: arm64: vgic: Ensure the irq refcount is nonzero when taking a ref
  KVM: arm64: vgic: Rely on RCU protection in vgic_get_lpi()
  KVM: arm64: vgic: Free LPI vgic_irq structs in an RCU-safe manner
  KVM: arm64: vgic: Use atomics to count LPIs
  KVM: arm64: vgic: Get rid of the LPI linked-list
  KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list()
  KVM: arm64: vgic-v3: Iterate the xarray to find pending LPIs
  KVM: arm64: vgic: Use xarray to find LPI in vgic_get_lpi()
  KVM: arm64: vgic: Store LPIs in an xarray
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/vm-configuration: (29 commits)
  : VM configuration enforcement, courtesy of Marc Zyngier
  :
  : Userspace has gained the ability to control the features visible
  : through the ID registers, yet KVM didn't take this into account as the
  : effective feature set when determing trap / emulation behavior. This
  : series adds:
  :
  :  - Mechanism for testing the presence of a particular CPU feature in the
  :    guest's ID registers
  :
  :  - Infrastructure for computing the effective value of VNCR-backed
  :    registers, taking into account the RES0 / RES1 bits for a particular
  :    VM configuration
  :
  :  - Implementation of 'fine-grained UNDEF' controls that shadow the FGT
  :    register definitions.
  KVM: arm64: Don't initialize idreg debugfs w/ preemption disabled
  KVM: arm64: Fail the idreg iterator if idregs aren't initialized
  KVM: arm64: Make build-time check of RES0/RES1 bits optional
  KVM: arm64: Add debugfs file for guest's ID registers
  KVM: arm64: Snapshot all non-zero RES0/RES1 sysreg fields for later checking
  KVM: arm64: Make FEAT_MOPS UNDEF if not advertised to the guest
  KVM: arm64: Make AMU sysreg UNDEF if FEAT_AMU is not advertised to the guest
  KVM: arm64: Make PIR{,E0}_EL1 UNDEF if S1PIE is not advertised to the guest
  KVM: arm64: Make TLBI OS/Range UNDEF if not advertised to the guest
  KVM: arm64: Streamline save/restore of HFG[RW]TR_EL2
  KVM: arm64: Move existing feature disabling over to FGU infrastructure
  KVM: arm64: Propagate and handle Fine-Grained UNDEF bits
  KVM: arm64: Add Fine-Grained UNDEF tracking information
  KVM: arm64: Rename __check_nv_sr_forward() to triage_sysreg_trap()
  KVM: arm64: Use the xarray as the primary sysreg/sysinsn walker
  KVM: arm64: Register AArch64 system register entries with the sysreg xarray
  KVM: arm64: Always populate the trap configuration xarray
  KVM: arm64: nv: Move system instructions to their own sys_reg_desc array
  KVM: arm64: Drop the requirement for XARRAY_MULTI
  KVM: arm64: nv: Turn encoding ranges into discrete XArray stores
  ...
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/misc:
  : Miscellaneous updates
  :
  :  - Fix handling of features w/ nonzero safe values in set_id_regs
  :    selftest
  :
  :  - Cleanup the unused kern_hyp_va() asm macro
  :
  :  - Differentiate nVHE and hVHE in boot-time message
  :
  :  - Several selftests cleanups
  :
  :  - Drop bogus return value from kvm_arch_create_vm_debugfs()
  :
  :  - Make save/restore of SPE and TRBE control registers affect EL1 state
  :    in hVHE mode
  :
  :  - Typos
  KVM: arm64: Fix TRFCR_EL1/PMSCR_EL1 access in hVHE mode
  KVM: selftests: aarch64: Remove unused functions from vpmu test
  KVM: arm64: Fix typos
  KVM: Get rid of return value from kvm_arch_create_vm_debugfs()
  KVM: selftests: Print timer ctl register in ISTATUS assertion
  KVM: selftests: Fix GUEST_PRINTF() format warnings in ARM code
  KVM: arm64: removed unused kern_hyp_va asm macro
  KVM: arm64: add comments to __kern_hyp_va
  KVM: arm64: print Hyp mode
  KVM: arm64: selftests: Handle feature fields with nonzero minimum value correctly
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

* kvm-arm64/feat_e2h0:
  : Support for FEAT_E2H0, courtesy of Marc Zyngier
  :
  : As described in the cover letter:
  :
  :   Since ARMv8.1, the architecture has grown the VHE feature, which makes
  :   EL2 a superset of EL1. With ARMv9.5 (and retroactively allowed from
  :   ARMv8.1), the architecture allows implementations to have VHE as the
  :   *only* implemented behaviour, meaning that HCR_EL2.E2H can be
  :   implemented as RES1. As a follow-up, HCR_EL2.NV1 can also be
  :   implemented as RES0, making the VHE-ness of the architecture
  :   recursive.
  :
  : This series adds support for detecting the architectural feature of E2H
  : being RES1, leveraging the existing infrastructure for handling
  : out-of-spec CPUs that are VHE-only. Additionally, the (incomplete) NV
  : infrastructure in KVM is updated to enforce E2H=1 for guest hypervisors
  : on implementations that do not support NV1.
  arm64: cpufeatures: Fix FEAT_NV check when checking for FEAT_NV1
  arm64: cpufeatures: Only check for NV1 if NV is present
  arm64: cpufeatures: Add missing ID_AA64MMFR4_EL1 to __read_sysreg_by_encoding()
  KVM: arm64: Handle Apple M2 as not having HCR_EL2.NV1 implemented
  KVM: arm64: Force guest's HCR_EL2.E2H RES1 when NV1 is not implemented
  KVM: arm64: Expose ID_AA64MMFR4_EL1 to guests
  arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative
  arm64: cpufeature: Detect HCR_EL2.NV1 being RES0
  arm64: cpufeature: Add ID_AA64MMFR4_EL1 handling
  arm64: sysreg: Add layout for ID_AA64MMFR4_EL1
  arm64: cpufeature: Correctly display signed override values
  arm64: cpufeatures: Correctly handle signed values
  arm64: Add macro to compose a sysreg field value
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

The KVM RISC-V allows Zacas extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zacas extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

The KVM RISC-V allows Ztso extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ztso extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

The SEED CSR access from VS/VU mode (guest) will always trap to
HS-mode (KVM) when Zkr extension is available to the Guest/VM.

Forward this CSR access to KVM user space so that it can be
emulated based on the method chosen by VMM.

Fixes: f370b4e6 ("RISC-V: KVM: Allow scalar crypto extensions for Guest/VM")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Add a KVM selftests to validate the Sstc timer functionality.
The test was ported from arm64 arch timer test.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().

The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Some CSR registers like CRMD/PRMD are saved during enter VM mode now.
However they are not restored for actual use, so saving for these CSR
registers can be removed.
Reviewed-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch VCPUs have their own separate HW timers. SW timer is to wake
up blocked vcpu thread, rather than HW timer emulation. When blocking
vcpu scheduled out, SW timer is used to wakeup blocked vcpu thread and
injects timer interrupt. It does not care about whether guest timer is
in period mode or oneshot mode, and SW timer needs not to be restarted
since vcpu has been woken.

This patch does not restart SW timer when it is expired.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

SW timer is enabled when vcpu thread is scheduled out, and it is to wake
up vcpu from blocked queue. If vcpu thread is scheduled out but is not
blocked, such as it is preempted by other threads, it is not necessary
to enable SW timer. Since vcpu thread is still on running queue if it is
preempted and SW timer is only to wake up vcpu on blocking queue, so SW
timer is not useful in this situation.

This patch enables SW timer only when vcpu is scheduled out and is
blocking.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Supported CPUCFG information comes from function _kvm_get_cpucfg_mask().
A bit should be zero if it is reserved by HW or if it is not supported
by KVM.

Also LoongArch software page table walk feature defined in CPUCFG2_LSPW
is supported by KVM, it should be enabled by default.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Explicitly close() guest_memfd files in various guest_memfd and
private_mem_conversions tests, there's no reason to keep the files open
until the test exits.

Fixes: 8a89efd4 ("KVM: selftests: Add basic selftest for guest_memfd()")
Fixes: 43f623f3 ("KVM: selftests: Add x86-only selftest for private memory conversions")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20240227015716.27284-1-dongli.zhang@oracle.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>

The fast-path timer delivery introduced a recursive locking deadlock
when userspace configures a timer which has already expired and is
delivered immediately. The call to kvm_xen_inject_timer_irqs() can
call to kvm_xen_set_evtchn() which may take kvm->arch.xen.xen_lock,
which is already held in kvm_xen_vcpu_get_attr().

 ============================================
 WARNING: possible recursive locking detected
 6.8.0-smp--5e10b4d51d77-drs #232 Tainted: G           O
 --------------------------------------------
 xen_shinfo_test/250013 is trying to acquire lock:
 ffff938c9930cc30 (&kvm->arch.xen.xen_lock){+.+.}-{3:3}, at: kvm_xen_set_evtchn+0x74/0x170 [kvm]

 but task is already holding lock:
 ffff938c9930cc30 (&kvm->arch.xen.xen_lock){+.+.}-{3:3}, at: kvm_xen_vcpu_get_attr+0x38/0x250 [kvm]

Now that the gfn_to_pfn_cache has its own self-sufficient locking, its
callers no longer need to ensure serialization, so just stop taking
kvm->arch.xen.xen_lock from kvm_xen_set_evtchn().

Fixes: 77c9b9de ("KVM: x86/xen: Use fast path for Xen timer delivery")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-6-dwmw2@infradead.orgSigned-off-by: Sean Christopherson <seanjc@google.com>

The locking on the gfn_to_pfn_cache is... interesting. And awful.

There is a rwlock in ->lock which readers take to ensure protection
against concurrent changes. But __kvm_gpc_refresh() makes assumptions
that certain fields will not change even while it drops the write lock
and performs MM operations to revalidate the target PFN and kernel
mapping.

Commit 93984f19 ("KVM: Fully serialize gfn=>pfn cache refresh via
mutex") partly addressed that — not by fixing it, but by adding a new
mutex, ->refresh_lock. This prevented concurrent __kvm_gpc_refresh()
calls on a given gfn_to_pfn_cache, but is still only a partial solution.

There is still a theoretical race where __kvm_gpc_refresh() runs in
parallel with kvm_gpc_deactivate(). While __kvm_gpc_refresh() has
dropped the write lock, kvm_gpc_deactivate() clears the ->active flag
and unmaps ->khva. Then __kvm_gpc_refresh() determines that the previous
->pfn and ->khva are still valid, and reinstalls those values into the
structure. This leaves the gfn_to_pfn_cache with the ->valid bit set,
but ->active clear. And a ->khva which looks like a reasonable kernel
address but is actually unmapped.

All it takes is a subsequent reactivation to cause that ->khva to be
dereferenced. This would theoretically cause an oops which would look
something like this:

[1724749.564994] BUG: unable to handle page fault for address: ffffaa3540ace0e0
[1724749.565039] RIP: 0010:__kvm_xen_has_interrupt+0x8b/0xb0

I say "theoretically" because theoretically, that oops that was seen in
production cannot happen. The code which uses the gfn_to_pfn_cache is
supposed to have its *own* locking, to further paper over the fact that
the gfn_to_pfn_cache's own papering-over (->refresh_lock) of its own
rwlock abuse is not sufficient.

For the Xen vcpu_info that external lock is the vcpu->mutex, and for the
shared info it's kvm->arch.xen.xen_lock. Those locks ought to protect
the gfn_to_pfn_cache against concurrent deactivation vs. refresh in all
but the cases where the vcpu or kvm object is being *destroyed*, in
which case the subsequent reactivation should never happen.

Theoretically.

Nevertheless, this locking abuse is awful and should be fixed, even if
no clear explanation can be found for how the oops happened. So expand
the use of the ->refresh_lock mutex to ensure serialization of
activate/deactivate vs. refresh and make the pfncache locking entirely
self-sufficient.

This means that a future commit can simplify the locking in the callers,
such as the Xen emulation code which has an outstanding problem with
recursive locking of kvm->arch.xen.xen_lock, which will no longer be
necessary.

The rwlock abuse described above is still not best practice, although
it's harmless now that the ->refresh_lock is held for the entire duration
while the offending code drops the write lock, does some other stuff,
then takes the write lock again and assumes nothing changed. That can
also be fixed^W cleaned up in a subsequent commit, but this commit is
a simpler basis for the Xen deadlock fix mentioned above.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-5-dwmw2@infradead.org
[sean: use guard(mutex) to fix a missed unlock]
Signed-off-by: Sean Christopherson <seanjc@google.com>

The kvm_xen_inject_vcpu_vector() function has a comment saying "the fast
version will always work for physical unicast", justifying its use of
kvm_irq_delivery_to_apic_fast() and the WARN_ON_ONCE() when that fails.

In fact that assumption isn't true if X2APIC isn't in use by the guest
and there is (8-bit x)APIC ID aliasing. A single "unicast" destination
APIC ID *may* then be delivered to multiple vCPUs. Remove the warning,
and in fact it might as well just call kvm_irq_delivery_to_apic().
Reported-by: Michal Luczaj <mhal@rbox.co>
Fixes: fde0451b ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-4-dwmw2@infradead.orgSigned-off-by: Sean Christopherson <seanjc@google.com>

Linux guests since commit b1c3497e ("x86/xen: Add support for
HVMOP_set_evtchn_upcall_vector") in v6.0 onwards will use the per-vCPU
upcall vector when it's advertised in the Xen CPUID leaves.

This upcall is injected through the guest's local APIC as an MSI, unlike
the older system vector which was merely injected by the hypervisor any
time the CPU was able to receive an interrupt and the upcall_pending
flags is set in its vcpu_info.

Effectively, that makes the per-CPU upcall edge triggered instead of
level triggered, which results in the upcall being lost if the MSI is
delivered when the local APIC is *disabled*.

Xen checks the vcpu_info->evtchn_upcall_pending flag when the local APIC
for a vCPU is software enabled (in fact, on any write to the SPIV
register which doesn't disable the APIC). Do the same in KVM since KVM
doesn't provide a way for userspace to intervene and trap accesses to
the SPIV register of a local APIC emulated by KVM.

Fixes: fde0451b ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240227115648.3104-3-dwmw2@infradead.orgSigned-off-by: Sean Christopherson <seanjc@google.com>

A test program such as http://david.woodhou.se/timerlat.c confirms user
reports that timers are increasingly inaccurate as the lifetime of a
guest increases. Reporting the actual delay observed when asking for
100µs of sleep, it starts off OK on a newly-launched guest but gets
worse over time, giving incorrect sleep times:

root@ip-10-0-193-21:~# ./timerlat -c -n 5
00000000 latency 103243/100000 (3.2430%)
00000001 latency 103243/100000 (3.2430%)
00000002 latency 103242/100000 (3.2420%)
00000003 latency 103245/100000 (3.2450%)
00000004 latency 103245/100000 (3.2450%)

The biggest problem is that get_kvmclock_ns() returns inaccurate values
when the guest TSC is scaled. The guest sees a TSC value scaled from the
host TSC by a mul/shift conversion (hopefully done in hardware). The
guest then converts that guest TSC value into nanoseconds using the
mul/shift conversion given to it by the KVM pvclock information.

But get_kvmclock_ns() performs only a single conversion directly from
host TSC to nanoseconds, giving a different result. A test program at
http://david.woodhou.se/tsdrift.c demonstrates the cumulative error
over a day.

It's non-trivial to fix get_kvmclock_ns(), although I'll come back to
that. The actual guest hv_clock is per-CPU, and *theoretically* each
vCPU could be running at a *different* frequency. But this patch is
needed anyway because...

The other issue with Xen timers was that the code would snapshot the
host CLOCK_MONOTONIC at some point in time, and then... after a few
interrupts may have occurred, some preemption perhaps... would also read
the guest's kvmclock. Then it would proceed under the false assumption
that those two happened at the *same* time. Any time which *actually*
elapsed between reading the two clocks was introduced as inaccuracies
in the time at which the timer fired.

Fix it to use a variant of kvm_get_time_and_clockread(), which reads the
host TSC just *once*, then use the returned TSC value to calculate the
kvmclock (making sure to do that the way the guest would instead of
making the same mistake get_kvmclock_ns() does).

Sadly, hrtimers based on CLOCK_MONOTONIC_RAW are not supported, so Xen
timers still have to use CLOCK_MONOTONIC. In practice the difference
between the two won't matter over the timescales involved, as the
*absolute* values don't matter; just the delta.

This does mean a new variant of kvm_get_time_and_clockread() is needed;
called kvm_get_monotonic_and_clockread() because that's what it does.

Fixes: 53639526 ("KVM: x86/xen: handle PV timers oneshot mode")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-2-dwmw2@infradead.org
[sean: massage moved comment, tweak if statement formatting]
Signed-off-by: Sean Christopherson <seanjc@google.com>

Pull phy fixes from Vinod Koul:

  - qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3
    offset fix on qmp-usb

  - freescale: fix for dphy alias

* tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: qcom-qmp-usb: fix v3 offsets data
  phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
  phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
  phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes