- 27 Feb, 2014 28 commits
-
-
Malcolm Priestley authored
Replace with urb->actual_length. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
Just use urb->status directly. Signed-off-by:
-
Malcolm Priestley authored
Remove commented out code, white space and camel case. camel case changes pDevice -> priv pContext -> context pUrb -> urb Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
-
Malcolm Priestley authored
Get rid of unnessary else statement by !(MP_IS_READY(pDevice) && pDevice->Flags & fMP_POST_WRITES) Signed-off-by:
-
Mark Hounschell authored
This patch addresses the follow error message followed by a kernel oops: dgap: driver does not set tty->port. This will crash the kernel later. Fix the driver It also renames the main function this patch addresses because its name is misleading. Signed-off-by:
Mark Hounschell <markh@compro.net> Signed-off-by:
-
Masanari Iida authored
This patch fix C99 style comments in pci.c and pci.h Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Masanari Iida authored
Fix C99 style comments in efuse.c. Signed-off-by:
-
Masanari Iida authored
Fix spelling typo in rtl8821ae/btcoexist. Signed-off-by:
-
Masanari Iida authored
Fix spelling typo in comment and printk within rtl8821ae/rtl8821ae. Signed-off-by:
-
Masanari Iida authored
Fix spelling typo in comment and printk within rtl8821ae. Signed-off-by:
-
Philipp Zabel authored
This patch allows to optionally attach the parallel-display to a panel supported by a drm_panel driver instead of supplying the modes via device tree. Before: parallel-display { compatible = "fsl,imx-parallel-display"; ... display-timings { native-timing = <&timing1>; timing1: etm0700g0dh6 { hactive = <800>; vactive = <480>; clock-frequency = <33260000>; hsync-len = <128>; hback-porch = <88>; hfront-porch = <40>; vsync-len = <2>; vback-porch = <33>; vfront-porch = <10>; hsync-active = <0>; vsync-active = <0>; ... }; }; ... }; After: parallel-display { compatible = "fsl,imx-parallel-display"; fsl,panel = <&panel>; ... }; panel: panel { compatible = "edt,etm0700g0dh6", "simple-panel"; }; Signed-off-by:Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Since msleep(2) can sleep up to 20ms anyway, make this explicit by using usleep_range(2000, 20000). Signed-off-by:
-
Philipp Zabel authored
The IPU display controller supports a non-standard green-red-blue ordered format that is used on the connection between IPU display interface 1 and the TV encoder on i.MX53. In preparation for the move of IPU core code out of staging, place the IPU_PIX_FMT_GBR24 definition in imx-ipu-v3.h, so that both the IPU display interface driver and the TVE encoder driver can access it. Signed-off-by:
-
Monam Agarwal authored
This patch fixes the following checkpatch.pl warning in panel.c: WARNING: quoted string split across lines Signed-off-by:
Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by:
-
Monam Agarwal authored
This patch fixes the following checkpatch.pl issues in panel.c: WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: -
Ana Rey authored
This patch clean-up comment-line style in r8180_core.c as the CodingStyle recommends. Signed-off-by:
Ana Rey <anarey@gmail.com> Signed-off-by:
-
Silvan Jegen authored
Instead of an explicit cast the min_t macro should be used. Signed-off-by:
Silvan Jegen <s.jegen@gmail.com> Signed-off-by:
-
Ana Rey authored
The Documentation/CodingStyle doesn't recommend the use of typedef, convert this to structure. While at it, I have also renamed the variable names that were used in this typedef not to use Hungarian notation. Signed-off-by:
-
Ana Rey authored
After the next warning messages by sparse tools: drivers/staging/rtl8187se/r8180_core.c:1621:5: warning: symbol 'rtl8180_len2duration' was not declared. Should it be static? drivers/staging/rtl8187se/r8180_core.c:1621:12: warning: ‘rtl8180_len2duration’ defined but not used [-Wunused-function] static u16 rtl8180_len2duration(u32 len, short rate, short *ext) ^ And the next search: $ grep -ir rtl8180_len2duration ./* ./r8180_core.c:u16 rtl8180_len2duration(u32 len, short rate, short *ext) Binary file ./r8187se.ko matches Binary file ./r8187se.o matches I decided to delete rtl8180_len2duration function. Signed-off-by: -
John Stultz authored
The new 64bit binder API causes build issues on 32bit ARM due to the lack of 64bit __get_user_asm_* implementation. Until that implementation is done, remove the choice for 32bit ARM, automatically enabling the old 32bit binder protocol. This can be reverted once a 64bit __get_user_asm_* implementation is merged. Cc: Colin Cross <ccross@android.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Serban Constantinescu <serban.constantinescu@arm.com> Cc: Android Kernel Team <kernel-team@android.com> Reported-by:
Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Monam Agarwal authored
This patch fixes the following checkpatch.pl warning in functions.c WARNING: Line length over 80 characters Signed-off-by:
-
Monam Agarwal authored
This patch fixes the following checkpatch.pl warning in functions.c WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: -
Monam Agarwal authored
This patch fixes the following checkpatch.pl warning in functions.c WARNING: please no spaces at the start of a line in Signed-off-by:
-
Daeseok Youn authored
After spin_lock() is called, all of if-else conditions in this brace should reach the end of else and spin_unlock() must be called. So It doesn't need to call spin_unlock() without a return statement for handling an error. Also sparse says: drivers/staging/ced1401/usb1401.c:1080:28: warning: context imbalance in 'Handle1401Esc' - unexpected unlock Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by:
-
Chase Southwood authored
The variable ui_Command is as of right now being cleared to a value of zero between everytime that it writes to a port and then takes a new value from a port. Seems like this zeroing is unnecessary, so we can just remove these lines. Signed-off-by:
Chase Southwood <chase.southwood@yahoo.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Kumar Amit Mehta authored
Return -ENOMEM in ni_E_init if ni_gpct_device_construct returns NULL Signed-off-by:
Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by:
-
Monam Agarwal authored
This patch fixes the following checkpatch.pl warning in comedidev.h WARNING: Fix unnecessary space after function pointer Signed-off-by:
-
- 25 Feb, 2014 12 commits
-
-
Mark Hounschell authored
The last patch series exposed some dead code causing compile warnings. This patch removes that dead code and fixes the warnings Signed-off-by:
-
Chase Southwood authored
There are a couple of cases where a comment being on the same line as a statement is causing the line to be over 80 characters long. This is an easy fix, move these comments to the previous line. Signed-off-by:
-
Chase Southwood authored
There were some conditional blocks that had an unnecessary level of indentation in them. We can remove this to improve code clarity. Signed-off-by:
-
Chase Southwood authored
This patch further cleans up the comments in hwdrv_apci035.c, converting them to kernel style and removing some commented conditional statements that are unused. Signed-off-by:
-
Monam Agarwal authored
Signed-off-by:
-
Malcolm Priestley authored
Replace with enum assign as u8 type. Signed-off-by:
-
Malcolm Priestley authored
Remove commented out, white space and camel case. Camel case changes pContext -> context pDevice -> priv ContextType -> context_type ulBufLen -> buf_len Signed-off-by:
-
Malcolm Priestley authored
change pContext->bBoolInUse to false on connection errors. Signed-off-by:
-
Malcolm Priestley authored
Declare in order of pointer use. Signed-off-by:
-
Malcolm Priestley authored
Remove calls with break s_bCommandComplete(pDevice); spin_unlock_irq(&pDevice->lock); return; Add single call to s_bCommandComplete; Signed-off-by:
-
Malcolm Priestley authored
device_set_multi is an atomic call, in order to reduce atomic area of driver move code to be called from vRunCommand. Later the atomic area of vRunCommand can be reduced. Change existing code in device_set_multi to new function vnt_configure_filter minus its locks. Change device_set_multi to call bScheduleCommand device_set_multi is nolonger called from device open. Signed-off-by:
-
Malcolm Priestley authored
Replace with struct vnt_interrupt_buffer. Using only the live member of old structure pDataBuf -> data_buf bInUse -> in_use uDataLen is unused and dropped. Signed-off-by:
-
