Test that when a group in exclude mode expires it changes mode to
include and the blocked entries are deleted.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
   state          report        result                  action
 EXCLUDE (X,Y)  BLOCK (A)     EXCLUDE (X+(A-Y),Y)      (A-X-Y)=Group Timer
                                                       Send Q(G,A-Y)
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
    state          report        result                  action
  INCLUDE (A)    BLOCK (B)     INCLUDE (A)              Send Q(G,A*B)
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
    state          report        result                  action
  EXCLUDE (X,Y)  TO_EX (A)     EXCLUDE (A-Y,Y*A)        (A-X-Y)=Group Timer
                                                        Delete (X-A)
                                                        Delete (Y-A)
                                                        Send Q(G,A-Y)
                                                        Group Timer=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
     state          report        result                  action
   EXCLUDE (X,Y)  IS_EX (A)     EXCLUDE (A-Y,Y*A)        (A-X-Y)=GMI
                                                         Delete (X-A)
                                                         Delete (Y-A)
                                                         Group Timer=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
    state          report        result                  action
   EXCLUDE (X,Y)  IS_IN (A)     EXCLUDE (X+A,Y-A)       (A)=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
   state          report        result                  action
  EXCLUDE (X,Y)  ALLOW (A)     EXCLUDE (X+A,Y-A)       (A)=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
  state          report        result                  action
 INCLUDE (A)    TO_EX (B)     EXCLUDE (A*B,B-A)       (B-A)=0
                                                      Delete (A-B)
                                                      Send Q(G,A*B)
                                                      Group Timer=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
   state          report        result                 action
  INCLUDE (A)    IS_EX (B)     EXCLUDE (A*B,B-A)      (B-A)=0
                                                      Delete (A-B)
                                                      Group Timer=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The test checks for the following case:
   state          report        result                 action
 INCLUDE (A)    IS_IN (B)     INCLUDE (A+B)            (B)=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

First we test is_include/include mode then we build on that with allow
effectively achieving:
  state          report        result                 action
 INCLUDE (A)    ALLOW (B)    INCLUDE (A+B)           (B)=GMI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add helpers which will be used in subsequent tests, they are:
 - check_sg_entries: check for proper source list and S,G entry
   existence
 - check_sg_fwding: check for proper traffic forwarding/blocking
 - check_sg_state: check for proper blocked/forwarding entry state
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We have to specifically check for udp protocol in addition to the mac
address because in IGMPv3 tests group-specific queries will use the same
mac address.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for one more argument which specifies the source address to
use. It will be later used for IGMPv3 S,G entry testing.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To prepare the bridge_igmp.sh for IGMPv3 we need to rename the
current test to IGMPv2.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Refactor phy_led_trigger_register() and deduplicate its functionality
when registering LED trigger for link.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201027182146.21355-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch enables the HW LPI Timer which controls the automatic entry
and exit of the LPI state.
The EEE LPI timer value is configured through ethtool. The driver will
auto select the LPI HW timer if the value in the HW timer supported range.
Else, the driver will fallback to SW timer.
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Link: https://lore.kernel.org/r/20201027160051.22898-1-weifeng.voon@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Arnd Bergmann says:

====================
wimax: move to staging

After I sent a fix for what appeared to be a harmless warning in
the wimax user interface code, the conclusion was that the whole
thing has most likely not been used in a very long time, and the
user interface possibly been broken since b61a5eea ("wimax: use
genl_register_family_with_ops()").

Using a shared branch between net-next and staging should help
coordinate patches getting submitted against it.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

TIPC reserves 64 service types for current and future internal use.
Therefore, the bind() function is meant to block regular user sockets
from being bound to these values, while it should let through such
bindings from internal users.

However, since we at the design moment saw no way to distinguish
between regular and internal users the filter function ended up
with allowing all bindings of the reserved types which were really
in use ([0,1]), and block all the rest ([2,63]).

This is risky, since a regular user may bind to the service type
representing the topology server (TIPC_TOP_SRV == 1) or the one used
for indicating neighboring node status (TIPC_CFG_SRV == 0), and wreak
havoc for users of those services, i.e., most users.

The reality is however that TIPC_CFG_SRV never is bound through the
bind() function, since it doesn't represent a regular socket, and
TIPC_TOP_SRV can also be made to bypass the checks in tipc_bind()
by introducing a different entry function, tipc_sk_bind().

It should be noted that although this is a change of the API semantics,
there is no risk we will break any currently working applications by
doing this. Any application trying to bind to the values in question
would be badly broken from the outset, so there is no chance we would
find any such applications in real-world production systems.

v2: Added warning printout when a user is blocked from binding,
    as suggested by Jakub Kicinski
Acked-by: Yung Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20201030012938.489557-1-jmaloy@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The 'break' is unnecessary because of previous 'return',
and we could discard it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201027135159.71444-1-zhangqilong3@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Unify the set of information returned by mii_ethtool_get_link_ksettings(),
mii_ethtool_gset() and phy_ethtool_ksettings_get(). Make the mii_*()
functions report advertised settings when autonegotiation if disabled.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201027114317.8259-1-l.stelmach@samsung.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Henrik Bjoernlund says:

====================
net: bridge: cfm: Add support for Connectivity Fault Management(CFM)

Connectivity Fault Management (CFM) is defined in 802.1Q
section 12.14.

Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in Virtual
Bridged Networks. These capabilities can be used in networks
operated by multiple independent organizations, each with restricted
management access to each other’s equipment.

CFM functions are partitioned as follows:
    — Path discovery
    — Fault detection
    — Fault verification and isolation
    — Fault notification
    — Fault recovery

The primary CFM protocol shims are called Maintenance Points (MPs).
A MP can be either a MEP or a MHF.
The MEP:
    -It is the Maintenance association End Point
     described in 802.1Q section 19.2.
    -It is created on a specific level (1-7) and is assuring
     that no CFM frames are passing through this MEP on lower levels.
    -It initiates and terminates/validates CFM frames on its level.
    -It can only exist on a port that is related to a bridge.
The MHF:
    -It is the Maintenance Domain Intermediate Point
     (MIP) Half Function (MHF) described in 802.1Q section 19.3.
    -It is created on a specific level (1-7).
    -It is extracting/injecting certain CFM frame on this level.
    -It can only exist on a port that is related to a bridge.
    -Currently not supported.

There are defined the following CFM protocol functions:
    -Continuity Check
    -Loopback. Currently not supported.
    -Linktrace. Currently not supported.

This CFM component supports create/delete of MEP instances and
configuration of the different CFM protocols. Also status information
can be fetched and delivered through notification due to defect
status change.

The user interacts with CFM using the 'cfm' user space client
program, the client talks with the kernel using netlink.

Any notification emitted by CFM from the kernel can be monitored in
user space by starting 'cfm_server' program.

Currently this 'cfm' and 'cfm_server' programs are standalone placed
in a cfm repository https://github.com/microchip-ung/cfm but it is
considered to integrate this into 'iproute2'.

v1 -> v2
    Added the CFM switchdev interface and also added utilization by
    calling the interface from the kernel CFM implementation trying
    to offload CFM functionality to HW. This offload (CFM driver) is
    currently not implemented.

    Corrections based on RCF comments:
        -The single CFM kernel implementation Patch is broken up into
         three patches.
        -Changed the list of MEP instances from list_head to
         hlist_head.
        -Removed unnecessary RCU list traversing.
        -Solved RCU unlocking problem.
        -Removed unnecessary comments.
        -Added ASSERT_RTNL() where required.
        -Shaping up on error messages.
        -Correction NETLINK br_fill_ifinfo() to be able to handle
         'filter_mask' with multiple flags asserted.

v2 -> v3
    -The switchdev definition and utilization has been removed as
     there was no switchdev implementation.
    -Some compiling issues are fixed as Reported-by:
     kernel test robot <lkp@intel.com>.

v3 -> v4
    -Fixed potential crash during hlist walk where elements are
     removed.
    -Giving all commits unique titles.
    -NETLINK implementation split into three commits.
    -Commit "bridge: cfm: Bridge port remove" is merged with
     commit "bridge: cfm: Kernel space implementation of CFM. MEP
     create/delete."

v4 -> v5
    -Reordered members in struct net_bridge to bring member
     frame_type_list to the first cache line.
    -Helper functions nla_get_mac() and nla_get_maid() are removed.
    -The NLA_POLICY_NESTED() macro is used to initialize the
     br_cfm_policy array.
    -Fixed reverse xmas tree.

v5 -> v6
    -Fixed that the SKB buffer was not freed during error handling return.
    -Removed unused struct definition.
    -Changed bool to u8 bitfields for space save.
    -Utilizing the NETLINK policy validation feature.

v6 -> v7
    -Removed check of parameters in br_cfm_mep_config_set() and
     br_cfm_cc_peer_mep_add() in first commit of MEP implementation
     (Patch 4 out of 10)
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
====================

Link: https://lore.kernel.org/r/20201027100251.3241719-1-henrik.bjoernlund@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This is the implementation of Netlink notifications out of CFM.

Notifications are initiated whenever a state change happens in CFM.

IFLA_BRIDGE_CFM:
    Points to the CFM information.

IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
    This indicate that the MEP instance status are following.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
    This indicate that the peer MEP status are following.

CFM nested attribute has the following attributes in next level.

IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
    The MEP instance number of the delivered status.
    The type is NLA_U32.
IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
    The MEP instance received CFM PDU with unexpected Opcode.
    The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
    The MEP instance received CFM PDU with unexpected version.
    The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
    The MEP instance received CCM PDU with MD level lower than
    configured level. This frame is discarded.
    The type is NLA_U32 (bool).

IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
    The MEP instance number of the delivered status.
    The type is NLA_U32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
    The added Peer MEP ID of the delivered status.
    The type is NLA_U32.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
    The CCM defect status.
    The type is NLA_U32 (bool).
    True means no CCM frame is received for 3.25 intervals.
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
    The last received CCM PDU RDI.
    The type is NLA_U32 (bool).
IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
    The last received CCM PDU Port Status TLV value field.
    The type is NLA_U8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
    The last received CCM PDU Interface Status TLV value field.
    The type is NLA_U8.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
    A CCM frame has been received from Peer MEP.
    The type is NLA_U32 (bool).
    This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
    A CCM frame with TLV has been received from Peer MEP.
    The type is NLA_U32 (bool).
    This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
    A CCM frame with unexpected sequence number has been received
    from Peer MEP.
    The type is NLA_U32 (bool).
    When a sequence number is not one higher than previously received
    then it is unexpected.
    This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is the implementation of CFM netlink status
get information interface.

Add new nested netlink attributes. These attributes are used by the
user space to get status information.

GETLINK:
    Request filter RTEXT_FILTER_CFM_STATUS:
    Indicating that CFM status information must be delivered.

    IFLA_BRIDGE_CFM:
        Points to the CFM information.

    IFLA_BRIDGE_CFM_MEP_STATUS_INFO:
        This indicate that the MEP instance status are following.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO:
        This indicate that the peer MEP status are following.

CFM nested attribute has the following attributes in next level.

GETLINK RTEXT_FILTER_CFM_STATUS:
    IFLA_BRIDGE_CFM_MEP_STATUS_INSTANCE:
        The MEP instance number of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_STATUS_OPCODE_UNEXP_SEEN:
        The MEP instance received CFM PDU with unexpected Opcode.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_MEP_STATUS_VERSION_UNEXP_SEEN:
        The MEP instance received CFM PDU with unexpected version.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_MEP_STATUS_RX_LEVEL_LOW_SEEN:
        The MEP instance received CCM PDU with MD level lower than
        configured level. This frame is discarded.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_PEER_STATUS_INSTANCE:
        The MEP instance number of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_PEER_MEPID:
        The added Peer MEP ID of the delivered status.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_CCM_DEFECT:
        The CCM defect status.
        The type is u32 (bool).
        True means no CCM frame is received for 3.25 intervals.
        IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_RDI:
        The last received CCM PDU RDI.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_PORT_TLV_VALUE:
        The last received CCM PDU Port Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_IF_TLV_VALUE:
        The last received CCM PDU Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEEN:
        A CCM frame has been received from Peer MEP.
        The type is u32 (bool).
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_TLV_SEEN:
        A CCM frame with TLV has been received from Peer MEP.
        The type is u32 (bool).
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
    IFLA_BRIDGE_CFM_CC_PEER_STATUS_SEQ_UNEXP_SEEN:
        A CCM frame with unexpected sequence number has been received
        from Peer MEP.
        The type is u32 (bool).
        When a sequence number is not one higher than previously received
        then it is unexpected.
        This is cleared after GETLINK IFLA_BRIDGE_CFM_CC_PEER_STATUS_INFO.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is the implementation of CFM netlink configuration
get information interface.

Add new nested netlink attributes. These attributes are used by the
user space to get configuration information.

GETLINK:
    Request filter RTEXT_FILTER_CFM_CONFIG:
    Indicating that CFM configuration information must be delivered.

    IFLA_BRIDGE_CFM:
        Points to the CFM information.

    IFLA_BRIDGE_CFM_MEP_CREATE_INFO:
        This indicate that MEP instance create parameters are following.
    IFLA_BRIDGE_CFM_MEP_CONFIG_INFO:
        This indicate that MEP instance config parameters are following.
    IFLA_BRIDGE_CFM_CC_CONFIG_INFO:
        This indicate that MEP instance CC functionality
        parameters are following.
    IFLA_BRIDGE_CFM_CC_RDI_INFO:
        This indicate that CC transmitted CCM PDU RDI
        parameters are following.
    IFLA_BRIDGE_CFM_CC_CCM_TX_INFO:
        This indicate that CC transmitted CCM PDU parameters are
        following.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_INFO:
        This indicate that the added peer MEP IDs are following.

CFM nested attribute has the following attributes in next level.

GETLINK RTEXT_FILTER_CFM_CONFIG:
    IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
        The created MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
        The created MEP domain.
        The type is u32 (br_cfm_domain).
        It must be BR_CFM_PORT.
        This means that CFM frames are transmitted and received
        directly on the port - untagged. Not in a VLAN.
    IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
        The created MEP direction.
        The type is u32 (br_cfm_mep_direction).
        It must be BR_CFM_MEP_DIRECTION_DOWN.
        This means that CFM frames are transmitted and received on
        the port. Not in the bridge.
    IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
        The created MEP residence port ifindex.
        The type is u32 (ifindex).

    IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
        The deleted MEP instance number.
        The type is u32.

    IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
        The configured MEP unicast MAC address.
        The type is 6*u8 (array).
        This is used as SMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
        The configured MEP unicast MD level.
        The type is u32.
        It must be in the range 1-7.
        No CFM frames are passing through this MEP on lower levels.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
        The configured MEP ID.
        The type is u32.
        It must be in the range 0-0x1FFF.
        This MEP ID is inserted in any transmitted CCM frame.

    IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
        The Continuity Check (CC) functionality is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
        The CC expected receive interval of CCM frames.
        The type is u32 (br_cfm_ccm_interval).
        This is also the transmission interval of CCM frames when enabled.
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
        The CC expected receive MAID in CCM frames.
        The type is CFM_MAID_LENGTH*u8.
        This is MAID is also inserted in transmitted CCM frames.

    IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_MEPID:
        The CC Peer MEP ID added.
        The type is u32.
        When a Peer MEP ID is added and CC is enabled it is expected to
        receive CCM frames from that Peer MEP.

    IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_RDI_RDI:
        The RDI that is inserted in transmitted CCM PDU.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
        The transmitted CCM frame destination MAC address.
        The type is 6*u8 (array).
        This is used as DMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
        The transmitted CCM frame update (increment) of sequence
        number is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
        The period of time where CCM frame are transmitted.
        The type is u32.
        The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
        must be done before timeout to keep transmission alive.
        When period is zero any ongoing CCM frame transmission
        will be stopped.
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
        The transmitted CCM frame update with Interface Status TLV
        is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
        The transmitted Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
        The transmitted CCM frame update with Port Status TLV is enabled
        or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
        The transmitted Port Status TLV value field.
        The type is u8.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is the implementation of CFM netlink configuration
set information interface.

Add new nested netlink attributes. These attributes are used by the
user space to create/delete/configure CFM instances.

SETLINK:
    IFLA_BRIDGE_CFM:
        Indicate that the following attributes are CFM.

    IFLA_BRIDGE_CFM_MEP_CREATE:
        This indicate that a MEP instance must be created.
    IFLA_BRIDGE_CFM_MEP_DELETE:
        This indicate that a MEP instance must be deleted.
    IFLA_BRIDGE_CFM_MEP_CONFIG:
        This indicate that a MEP instance must be configured.
    IFLA_BRIDGE_CFM_CC_CONFIG:
        This indicate that a MEP instance Continuity Check (CC)
        functionality must be configured.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_ADD:
        This indicate that a CC Peer MEP must be added.
    IFLA_BRIDGE_CFM_CC_PEER_MEP_REMOVE:
        This indicate that a CC Peer MEP must be removed.
    IFLA_BRIDGE_CFM_CC_CCM_TX:
        This indicate that the CC transmitted CCM PDU must be configured.
    IFLA_BRIDGE_CFM_CC_RDI:
        This indicate that the CC transmitted CCM PDU RDI must be
        configured.

CFM nested attribute has the following attributes in next level.

SETLINK RTEXT_FILTER_CFM_CONFIG:
    IFLA_BRIDGE_CFM_MEP_CREATE_INSTANCE:
        The created MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CREATE_DOMAIN:
        The created MEP domain.
        The type is u32 (br_cfm_domain).
        It must be BR_CFM_PORT.
        This means that CFM frames are transmitted and received
        directly on the port - untagged. Not in a VLAN.
    IFLA_BRIDGE_CFM_MEP_CREATE_DIRECTION:
        The created MEP direction.
        The type is u32 (br_cfm_mep_direction).
        It must be BR_CFM_MEP_DIRECTION_DOWN.
        This means that CFM frames are transmitted and received on
        the port. Not in the bridge.
    IFLA_BRIDGE_CFM_MEP_CREATE_IFINDEX:
        The created MEP residence port ifindex.
        The type is u32 (ifindex).

    IFLA_BRIDGE_CFM_MEP_DELETE_INSTANCE:
        The deleted MEP instance number.
        The type is u32.

    IFLA_BRIDGE_CFM_MEP_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_MEP_CONFIG_UNICAST_MAC:
        The configured MEP unicast MAC address.
        The type is 6*u8 (array).
        This is used as SMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MDLEVEL:
        The configured MEP unicast MD level.
        The type is u32.
        It must be in the range 1-7.
        No CFM frames are passing through this MEP on lower levels.
    IFLA_BRIDGE_CFM_MEP_CONFIG_MEPID:
        The configured MEP ID.
        The type is u32.
        It must be in the range 0-0x1FFF.
        This MEP ID is inserted in any transmitted CCM frame.

    IFLA_BRIDGE_CFM_CC_CONFIG_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CONFIG_ENABLE:
        The Continuity Check (CC) functionality is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL:
        The CC expected receive interval of CCM frames.
        The type is u32 (br_cfm_ccm_interval).
        This is also the transmission interval of CCM frames when enabled.
    IFLA_BRIDGE_CFM_CC_CONFIG_EXP_MAID:
        The CC expected receive MAID in CCM frames.
        The type is CFM_MAID_LENGTH*u8.
        This is MAID is also inserted in transmitted CCM frames.

    IFLA_BRIDGE_CFM_CC_PEER_MEP_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_PEER_MEPID:
        The CC Peer MEP ID added.
        The type is u32.
        When a Peer MEP ID is added and CC is enabled it is expected to
        receive CCM frames from that Peer MEP.

    IFLA_BRIDGE_CFM_CC_RDI_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_RDI_RDI:
        The RDI that is inserted in transmitted CCM PDU.
        The type is u32 (bool).

    IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE:
        The configured MEP instance number.
        The type is u32.
    IFLA_BRIDGE_CFM_CC_CCM_TX_DMAC:
        The transmitted CCM frame destination MAC address.
        The type is 6*u8 (array).
        This is used as DMAC in all transmitted CFM frames.
    IFLA_BRIDGE_CFM_CC_CCM_TX_SEQ_NO_UPDATE:
        The transmitted CCM frame update (increment) of sequence
        number is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PERIOD:
        The period of time where CCM frame are transmitted.
        The type is u32.
        The time is given in seconds. SETLINK IFLA_BRIDGE_CFM_CC_CCM_TX
        must be done before timeout to keep transmission alive.
        When period is zero any ongoing CCM frame transmission
        will be stopped.
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV:
        The transmitted CCM frame update with Interface Status TLV
        is enabled or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_IF_TLV_VALUE:
        The transmitted Interface Status TLV value field.
        The type is u8.
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV:
        The transmitted CCM frame update with Port Status TLV is enabled
        or disabled.
        The type is u32 (bool).
    IFLA_BRIDGE_CFM_CC_CCM_TX_PORT_TLV_VALUE:
        The transmitted Port Status TLV value field.
        The type is u8.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is the third commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

Functionality is extended with CCM frame reception.
The MEP instance now contains CCM based status information.
Most important is the CCM defect status indicating if correct
CCM frames are received with the expected interval.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is the second commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

Functionality is extended with CCM frame transmission.

Interface is extended with these functions:
br_cfm_cc_rdi_set()
br_cfm_cc_ccm_tx()
br_cfm_cc_config_set()

A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
    The Continuity Check parameters can be configured to be used when
    transmitting CCM.

A MEP can be configured to start or stop transmission of CCM frames by
br_cfm_cc_ccm_tx()
    The CCM will be transmitted for a selected period in seconds.
    Must call this function before timeout to keep transmission alive.

A MEP transmitting CCM can be configured with inserted RDI in PDU by
br_cfm_cc_rdi_set()
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is the first commit of the implementation of the CFM protocol
according to 802.1Q section 12.14.

It contains MEP instance create, delete and configuration.

Connectivity Fault Management (CFM) comprises capabilities for
detecting, verifying, and isolating connectivity failures in
Virtual Bridged Networks. These capabilities can be used in
networks operated by multiple independent organizations, each
with restricted management access to each others equipment.

CFM functions are partitioned as follows:
    - Path discovery
    - Fault detection
    - Fault verification and isolation
    - Fault notification
    - Fault recovery

Interface consists of these functions:
br_cfm_mep_create()
br_cfm_mep_delete()
br_cfm_mep_config_set()
br_cfm_cc_config_set()
br_cfm_cc_peer_mep_add()
br_cfm_cc_peer_mep_remove()

A MEP instance is created by br_cfm_mep_create()
    -It is the Maintenance association End Point
     described in 802.1Q section 19.2.
    -It is created on a specific level (1-7) and is assuring
     that no CFM frames are passing through this MEP on lower levels.
    -It initiates and validates CFM frames on its level.
    -It can only exist on a port that is related to a bridge.
    -Attributes given cannot be changed until the instance is
     deleted.

A MEP instance can be deleted by br_cfm_mep_delete().

A created MEP instance has attributes that can be
configured by br_cfm_mep_config_set().

A MEP Continuity Check feature can be configured by
br_cfm_cc_config_set()
    The Continuity Check Receiver state machine can be
    enabled and disabled.
    According to 802.1Q section 19.2.8

A MEP can have Peer MEPs added and removed by
br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove()
    The Continuity Check feature can maintain connectivity
    status on each added Peer MEP.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This EtherType is used by all CFM protocal frames transmitted
according to 802.1Q section 12.14.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This makes it possible to include or exclude the CFM
protocol according to 802.1Q section 12.14.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch extends the processing of frames in the bridge. Currently MRP
frames needs special processing and the current implementation doesn't
allow a nice way to process different frame types. Therefore try to
improve this by adding a list that contains frame types that need
special processing. This list is iterated for each input frame and if
there is a match based on frame type then these functions will be called
and decide what to do with the frame. It can process the frame then the
bridge doesn't need to do anything or don't process so then the bridge
will do normal forwarding.
Signed-off-by: Henrik Bjoernlund  <henrik.bjoernlund@microchip.com>
Reviewed-by: Horatiu Vultur  <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Colin Ian King says:

====================
vsock: minor clean up of ioctl error handling

Two minor changes to the ioctl error handling.
====================

Link: https://lore.kernel.org/r/20201027090942.14916-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently when an invalid ioctl command is used the error return
is -EINVAL.  Fix this by returning the correct error -ENOIOCTLCMD.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When exercising the kernel with stress-ng with some ioctl tests the
"Unknown ioctl" error message is spamming the kernel log at a high
rate. Remove this message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fallthrough fix from Gustavo A. R. Silva:
 "This fixes a ton of fall-through warnings when building with Clang
  12.0.0 and -Wimplicit-fallthrough"

* tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  include: jhash/signal: Fix fall-through warnings for Clang

Pull networking fixes from Jakub Kicinski:
 "Current release regressions:

   - r8169: fix forced threading conflicting with other shared
     interrupts; we tried to fix the use of raise_softirq_irqoff from an
     IRQ handler on RT by forcing hard irqs, but this driver shares
     legacy PCI IRQs so drop the _irqoff() instead

   - tipc: fix memory leak caused by a recent syzbot report fix to
     tipc_buf_append()

  Current release - bugs in new features:

   - devlink: Unlock on error in dumpit() and fix some error codes

   - net/smc: fix null pointer dereference in smc_listen_decline()

  Previous release - regressions:

   - tcp: Prevent low rmem stalls with SO_RCVLOWAT.

   - net: protect tcf_block_unbind with block lock

   - ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering
     to only send legal frames to the hypervisor was too strict

   - net: hns3: Clear the CMDQ registers before unmapping BAR region;
     incorrect cleanup order was leading to a crash

   - bnxt_en - handful of fixes to fixes:
      - Send HWRM_FUNC_RESET fw command unconditionally, even if there
        are PCIe errors being reported
      - Check abort error state in bnxt_open_nic().
      - Invoke cancel_delayed_work_sync() for PFs also.
      - Fix regression in workqueue cleanup logic in bnxt_remove_one().

   - mlxsw: Only advertise link modes supported by both driver and
     device, after removal of 56G support from the driver 56G was not
     cleared from advertised modes

   - net/smc: fix suppressed return code

  Previous release - always broken:

   - netem: fix zero division in tabledist, caused by integer overflow

   - bnxt_en: Re-write PCI BARs after PCI fatal error.

   - cxgb4: set up filter action after rewrites

   - net: ipa: command payloads already mapped

  Misc:

   - s390/ism: fix incorrect system EID, it's okay to change since it
     was added in current release

   - vsock: use ns_capable_noaudit() on socket create to suppress false
     positive audit messages"

* tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
  r8169: fix issue with forced threading in combination with shared interrupts
  netem: fix zero division in tabledist
  ibmvnic: fix ibmvnic_set_mac
  mptcp: add missing memory scheduling in the rx path
  tipc: fix memory leak caused by tipc_buf_append()
  gtp: fix an use-before-init in gtp_newlink()
  net: protect tcf_block_unbind with block lock
  ibmveth: Fix use of ibmveth in a bridge.
  net/sched: act_mpls: Add softdep on mpls_gso.ko
  ravb: Fix bit fields checking in ravb_hwtstamp_get()
  devlink: Unlock on error in dumpit()
  devlink: Fix some error codes
  chelsio/chtls: fix memory leaks in CPL handlers
  chelsio/chtls: fix deadlock issue
  net: hns3: Clear the CMDQ registers before unmapping BAR region
  bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally.
  bnxt_en: Check abort error state in bnxt_open_nic().
  bnxt_en: Re-write PCI BARs after PCI fatal error.
  bnxt_en: Invoke cancel_delayed_work_sync() for PFs also.
  bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one().
  ...

Pull rdma fixes from Jason Gunthorpe:
 "The good news is people are testing rc1 in the RDMA world - the bad
  news is testing of the for-next area is not as good as I had hoped, as
  we really should have caught at least the rdma_connect_locked() issue
  before now.

  Notable merge window regressions that didn't get caught/fixed in time
  for rc1:

   - Fix in kernel users of rxe, they were broken by the rapid fix to
     undo the uABI breakage in rxe from another patch

   - EFA userspace needs to read the GID table but was broken with the
     new GID table logic

   - Fix user triggerable deadlock in mlx5 using devlink reload

   - Fix deadlock in several ULPs using rdma_connect from the CM handler
     callbacks

   - Memory leak in qedr"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/qedr: Fix memory leak in iWARP CM
  RDMA: Add rdma_connect_locked()
  RDMA/uverbs: Fix false error in query gid IOCTL
  RDMA/mlx5: Fix devlink deadlock on net namespace deletion
  RDMA/rxe: Fix small problem in network_type patch

As reported by Serge flag IRQF_NO_THREAD causes an error if the
interrupt is actually shared and the other driver(s) don't have this
flag set. This situation can occur if a PCI(e) legacy interrupt is
used in combination with forced threading.
There's no good way to deal with this properly, therefore we have to
remove flag IRQF_NO_THREAD. For fixing the original forced threading
issue switch to napi_schedule().

Fixes: 424a646e ("r8169: fix operation under forced interrupt threading")
Link: https://www.spinics.net/lists/netdev/msg694960.htmlReported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Link: https://lore.kernel.org/r/b5b53bfe-35ac-3768-85bf-74d1290cf394@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>