- 19 Oct, 2018 40 commits
-
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 2d408c0d ] Commit f599c64f ("xen-netfront: Fix race between device setup and open") changed the initialization order: xennet_create_queues() now happens before we do register_netdev() so using netdev->name in xennet_init_queue() is incorrect, we end up with the following in /proc/interrupts: 60: 139 0 xen-dyn -event eth%d-q0-tx 61: 265 0 xen-dyn -event eth%d-q0-rx 62: 234 0 xen-dyn -event eth%d-q1-tx 63: 1 0 xen-dyn -event eth%d-q1-rx and this looks ugly. Actually, using early netdev name (even when it's already set) is also not ideal: nowadays we tend to rename eth devices and queue name may end up not corresponding to the netdev name. Use nodename from xenbus device for queue naming: this can't change in VM's lifetime. Now /proc/interrupts looks like 62: 202 0 xen-dyn -event device/vif/0-q0-tx 63: 317 0 xen-dyn -event device/vif/0-q0-rx 64: 262 0 xen-dyn -event device/vif/0-q1-tx 65: 17 0 xen-dyn -event device/vif/0-q1-rx Fixes: f599c64f ("xen-netfront: Fix race between device setup and open") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Manikanta Pubbisetty authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 133bf90d ] As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Paul Cercueil authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit c6ea7e97 ] Having the zload address at 0x8060.0000 means the size of the uncompressed kernel cannot be bigger than around 6 MiB, as it is deflated at address 0x8001.0000. This limit is too small; a kernel with some built-in drivers and things like debugfs enabled will already be over 6 MiB in size, and so will fail to extract properly. To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000. This is fine, as all the boards featuring Ingenic JZ SoCs have at least 32 MiB of RAM, and use u-boot or compatible bootloaders which won't hardcode the load address but read it from the uImage's header. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19787/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Nicholas Piggin authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit bd90284c ] The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes. This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change. Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sandipan Das authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit c715fcfd ] For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information. For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly. This can be observed on a powerpc64le system running Fedora 27 as shown below. Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 <gaih_inet.constprop.7>: ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8> 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4> ... 0000000000110450 <getaddrinfo>: ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8> 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 <tcache_init.part.4>: ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8> 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ... # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script Before: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maynard Johnson <maynard@us.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: a60335ba ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit cd480691 ] For most of Exynos SoCs, Power Management Unit (PMU) address space is mapped into global variable 'pmu_base_addr' very early when initializing PMU interrupt controller. A lot of other machine code depends on it so when doing iounmap() on this address, clear the global as well to avoid usage of invalid value (pointing to unmapped memory region). Properly mapped PMU address space is a requirement for all other machine code so this fix is purely theoretical. Boot will fail immediately in many other places after following this error path. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Fredrik Noring authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 1ba0a59c ] I discovered the problem when developing a frame buffer driver for the PlayStation 2 (not yet merged), using the following video modes for the PlayStation 3 in drivers/video/fbdev/ps3fb.c: }, { /* 1080if */ "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_INTERLACED }, { /* 1080pf */ "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED }, In ps3fb_probe, the mode_option module parameter is used with fb_find_mode but it can only select the interlaced variant of 1920x1080 since the loop matching the modes does not take the difference between interlaced and progressive modes into account. In short, without the patch, progressive 1920x1080 cannot be chosen as a mode_option parameter since fb_find_mode (falsely) thinks interlace is a perfect match. Signed-off-by:
Fredrik Noring <noring@nocrew.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> [b.zolnierkie: updated patch description] Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Sandipan Das authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 9068533e ] For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack. The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist. Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack. This can be observed on a powerpc64le system running Fedora 27 as shown below. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ... # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Reported-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit b6566b47 ] Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Anton Vasilyev authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 5958fde7 ] goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does not have deallocation of fb, which leads to memory leak on probe/remove. The patch adds deallocation into goldfish_fb_remove(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Cc: Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 5ec1ec35 ] The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the > should be >= or we are one element beyond the end of the array. Fixes: 8b08cf2b ("OMAP: add TI OMAP framebuffer driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Imre Deak <imre.deak@solidboot.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 1d25e3ee ] Fix 2 printk format warnings (this driver is currently only used by arch/sh/) by using "%pap" instead of "%lx". Fixes these build warnings: ../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps': ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: linux-mtd@lists.infradead.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Hans Verkuil authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit b509d733 ] The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Felix Fietkau authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit f8a7bfe1 ] This patch disables irq on reboot to fix hang issues that were observed due to pending interrupts. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
John Keeping authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit e4975654 ] In pl330_update() when checking if a channel has been aborted, the channel's lock is not taken, only the overall pl330_dmac lock. But in pl330_terminate_all() the aborted flag (req_running==-1) is set under the channel lock and not the pl330_dmac lock. With threaded interrupts, this leads to a potential race: pl330_terminate_all pl330_update ------------------- ------------ lock channel entry lock pl330 _stop channel unlock pl330 lock pl330 check req_running != -1 req_running = -1 _start channel Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 9c2af1c7 ] If Make gets a fatal signal while a shell is executing, it may delete the target file that the recipe was supposed to update. This is needed to make sure that it is remade from scratch when Make is next run; if Make is interrupted after the recipe has begun to write the target file, it results in an incomplete file whose time stamp is newer than that of the prerequisites files. Make automatically deletes the incomplete file on interrupt unless the target is marked .PRECIOUS. The situation is just the same as when the shell fails for some reasons. Usually when a recipe line fails, if it has changed the target file at all, the file is corrupted, or at least it is not completely updated. Yet the file’s time stamp says that it is now up to date, so the next time Make runs, it will not try to update that file. However, Make does not cater to delete the incomplete target file in this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile to request it. scripts/Kbuild.include seems a suitable place to add it because it is included from almost all sub-makes. Please note .DELETE_ON_ERROR is not effective for phony targets. The external module building should never ever touch the kernel tree. The following recipe fails if include/generated/autoconf.h is missing. However, include/config/auto.conf is not deleted since it is a phony target. PHONY += include/config/auto.conf include/config/auto.conf: $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or $@ are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 11177e7a ] of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 787b4271 ("clk: imx: add imx6ul clk tree support") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Andreas Gruenbacher authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 77612578 ] To speed up the common case of appending to a file, gfs2_write_alloc_required presumes that writing beyond the end of a file will always require additional blocks to be allocated. This assumption is incorrect for preallocates files, but there are no negative consequences as long as *some* space is still left on the filesystem. One special file that always has some space preallocated beyond the end of the file is the rindex: when growing a filesystem, gfs2_grow adds one or more new resource groups and appends records describing those resource groups to the rindex; the preallocated space ensures that this is always possible. However, when a filesystem is completely full, gfs2_write_alloc_required will indicate that an additional allocation is required, and appending the next record to the rindex will fail even though space for that record has already been preallocated. To fix that, skip the incorrect optimization in gfs2_write_alloc_required, but for the rindex only. Other writes to preallocated space beyond the end of the file are still allowed to fail on completely full filesystems. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 934ffce1 ] Fix a static code checker warning: net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR' xfrm_tmpl_resolve return 0 just means no xdst found, return NULL instead of passing zero to ERR_PTR. Fixes: d809ec89 ("xfrm: do not assume that template resolving always returns xfrms") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit bd1cd0eb ] AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC() for expanding idVendor and idProduct fields. However, the latter macro adds also match_flags and bInterfaceClass, which are different from the values AU0828_DEVICE() macro sets after that. For fixing them, just expand idVendor and idProduct fields manually in AU0828_DEVICE(). This fixes sparse warnings like: sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 7c500f9e ] The default sample sizes set by msnd driver are bogus; it sets ALSA PCM format, not the actual bit width. Signed-off-by:
-
Miao Zhong authored
BugLink: https://bugs.launchpad.net/bugs/1798587 [ Upstream commit 0d535967 ] When PRI queue occurs overflow, driver should update the OVACKFLG to the PRIQ consumer register, otherwise subsequent PRI requests will not be processed. Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Miao Zhong <zhongmiao@hisilicon.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1798539Signed-off-by:
-
Ian Kent authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 0633da48 upstream. autofs_sbi() does not check the superblock magic number to verify it has been given an autofs super block. Backport Note: autofs4 has been renamed to autofs upstream. As a result the upstream patch does not apply cleanly onto 4.14.y. Link: http://lkml.kernel.org/r/153475422934.17131.7563724552005298277.stgit@pluto.themaw.net Reported-by: <syzbot+87c3c541582e56943277@syzkaller.appspotmail.com> Signed-off-by:
Ian Kent <raven@themaw.net> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 7233982a upstream. Fix to return error code -ENOMEM from the kmem_cache_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f78e5623 ("ubi: fastmap: Erase outdated anchor PEBs during attach") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Ondrej Mosnacek authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 0522236d upstream. This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX implementations. The problem is that the blkcipher_* functions should not be called in atomic context. The bugs can be reproduced via the AF_ALG interface by trying to encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then trigger BUG in crypto_yield(): [ 891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424 [ 891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc [ 891.864739] 1 lock held by kcapi-enc/12347: [ 891.864811] #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530 [ 891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1 [ 891.865251] Call Trace: [ 891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable) [ 891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310 [ 891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0 [ 891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto] [ 891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80 [ 891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530 [ 891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0 [ 891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0 [ 891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0 [ 891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70 Fixes: 8c755ace ("crypto: vmx - Adding CBC routines for VMX module") Fixes: c07f5d3d ("crypto: vmx - Adding support for XTS") Cc: stable@vger.kernel.org Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Peter Chen authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 5817f977 upstream. of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 86e1d5ad upstream. Make sure to drop the reference taken by of_find_device_by_node() when looking up an mdio device from a phy_id property during probe. Fixes: 549985ee ("cpsw: simplify the setup of the register pointers") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
David Rivshin authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 552165bc upstream. Commit 9e42f715 ("drivers: net: cpsw: add phy-handle parsing") saved the "phy-handle" phandle into a new cpsw_priv field. However, phy connections are per-slave, so the phy_node field should be in cpsw_slave_data rather than cpsw_priv. This would go unnoticed in a single emac configuration. But in dual_emac mode, the last "phy-handle" property parsed for either slave would be used by both of them, causing them both to refer to the same phy_device. Fixes: 9e42f715 ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by:
David Rivshin <drivshin@allworx.com> Tested-by:
Nicolas Chauvet <kwizart@gmail.com> Tested-by:
Andrew Goodbody <andrew.goodbody@cambrionix.com> Reviewed-by:
Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit e466af75 upstream. syzkaller reports an out of bound read in strlcpy(), triggered by xt_copy_counters_from_user() Fix this by using memcpy(), then forcing a zero byte at the last position of the destination, as Florian did for the non COMPAT code. Fixes: d7591f0c ("netfilter: x_tables: introduce and use xt_copy_counters_from_user") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
Nadav Amit authored
BugLink: https://bugs.launchpad.net/bugs/1798539 Fix a build error due to missing virt_to_phys() Reported-by:
kbuild test robot <lkp@intel.com> Fixes: f0a1bf29 ("vmw_balloon: fix inflation with batching") Cc: stable@vger.kernel.org Cc: Xavier Deguillard <xdeguillard@vmware.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1798539 commit 44a182b9 upstream. KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe4 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: <stable@vger.kernel.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Parav Pandit authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit 643d213a ] Currently if the cm_id is not bound to any netdevice, than for such cm_id, net namespace is ignored; which is incorrect. Regardless of cm_id bound to a netdevice or not, net namespace must match. When a cm_id is bound to a netdevice, in such case net namespace and netdevice both must match. Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Paul Burton authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit d4da0e97 ] If a driver causes DMA cache maintenance with a zero length then we currently BUG and kill the kernel. As this is a scenario that we may well be able to recover from, WARN & return in the condition instead. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/14623/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by:
-
Chao Yu authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit c77ec61c ] This patch adds to do sanity check with {sit,nat}_ver_bitmap_bytesize during mount, in order to avoid accessing across cache boundary with this abnormal bitmap size. - Overview buffer overrun in build_sit_info() when mounting a crafted f2fs image - Reproduce - Kernel message [ 548.580867] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.580877] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.584979] ================================================================== [ 548.586568] BUG: KASAN: use-after-free in kmemdup+0x36/0x50 [ 548.587715] Read of size 64 at addr ffff8801e9c265ff by task mount/1295 [ 548.589428] CPU: 1 PID: 1295 Comm: mount Not tainted 4.18.0-rc1+ #4 [ 548.589432] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.589438] Call Trace: [ 548.589474] dump_stack+0x7b/0xb5 [ 548.589487] print_address_description+0x70/0x290 [ 548.589492] kasan_report+0x291/0x390 [ 548.589496] ? kmemdup+0x36/0x50 [ 548.589509] check_memory_region+0x139/0x190 [ 548.589514] memcpy+0x23/0x50 [ 548.589518] kmemdup+0x36/0x50 [ 548.589545] f2fs_build_segment_manager+0x8fa/0x3410 [ 548.589551] ? __asan_loadN+0xf/0x20 [ 548.589560] ? f2fs_sanity_check_ckpt+0x1be/0x240 [ 548.589566] ? f2fs_flush_sit_entries+0x10c0/0x10c0 [ 548.589587] ? __put_user_ns+0x40/0x40 [ 548.589604] ? find_next_bit+0x57/0x90 [ 548.589610] f2fs_fill_super+0x194b/0x2b40 [ 548.589617] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589637] ? set_blocksize+0x90/0x140 [ 548.589651] mount_bdev+0x1c5/0x210 [ 548.589655] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.589667] f2fs_mount+0x15/0x20 [ 548.589672] mount_fs+0x60/0x1a0 [ 548.589683] ? alloc_vfsmnt+0x309/0x360 [ 548.589688] vfs_kern_mount+0x6b/0x1a0 [ 548.589699] do_mount+0x34a/0x18c0 [ 548.589710] ? lockref_put_or_lock+0xcf/0x160 [ 548.589716] ? copy_mount_string+0x20/0x20 [ 548.589728] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.589734] ? kasan_check_write+0x14/0x20 [ 548.589740] ? _copy_from_user+0x6a/0x90 [ 548.589744] ? memdup_user+0x42/0x60 [ 548.589750] ksys_mount+0x83/0xd0 [ 548.589755] __x64_sys_mount+0x67/0x80 [ 548.589781] do_syscall_64+0x78/0x170 [ 548.589797] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.589820] RIP: 0033:0x7f76fc331b9a [ 548.589821] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.589880] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.589890] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.589892] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.589895] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.589897] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.589900] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.590242] The buggy address belongs to the page: [ 548.591243] page:ffffea0007a70980 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 548.592886] flags: 0x2ffff0000000000() [ 548.593665] raw: 02ffff0000000000 dead000000000100 dead000000000200 0000000000000000 [ 548.595258] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 548.603713] page dumped because: kasan: bad access detected [ 548.605203] Memory state around the buggy address: [ 548.606198] ffff8801e9c26480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.607676] ffff8801e9c26500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.609157] >ffff8801e9c26580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.610629] ^ [ 548.612088] ffff8801e9c26600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.613674] ffff8801e9c26680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 548.615141] ================================================================== [ 548.616613] Disabling lock debugging due to kernel taint [ 548.622871] WARNING: CPU: 1 PID: 1295 at mm/page_alloc.c:4065 __alloc_pages_slowpath+0xe4a/0x1420 [ 548.622878] Modules linked in: snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mac_hid i2c_piix4 soundcore ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear 8139too crct10dif_pclmul crc32_pclmul qxl drm_kms_helper syscopyarea aesni_intel sysfillrect sysimgblt fb_sys_fops ttm drm aes_x86_64 crypto_simd cryptd 8139cp glue_helper mii pata_acpi floppy [ 548.623217] CPU: 1 PID: 1295 Comm: mount Tainted: G B 4.18.0-rc1+ #4 [ 548.623219] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 548.623226] RIP: 0010:__alloc_pages_slowpath+0xe4a/0x1420 [ 548.623227] Code: ff ff 01 89 85 c8 fe ff ff e9 91 fc ff ff 41 89 c5 e9 5c fc ff ff 0f 0b 89 f8 25 ff ff f7 ff 89 85 8c fe ff ff e9 d5 f2 ff ff <0f> 0b e9 65 f2 ff ff 65 8b 05 38 81 d2 47 f6 c4 01 74 1c 65 48 8b [ 548.623281] RSP: 0018:ffff8801f28c7678 EFLAGS: 00010246 [ 548.623284] RAX: 0000000000000000 RBX: 00000000006040c0 RCX: ffffffffb82f73b7 [ 548.623287] RDX: 1ffff1003e518eeb RSI: 000000000000000c RDI: 0000000000000000 [ 548.623290] RBP: ffff8801f28c7880 R08: 0000000000000000 R09: ffffed0047fff2c5 [ 548.623292] R10: 0000000000000001 R11: ffffed0047fff2c4 R12: ffff8801e88de040 [ 548.623295] R13: 00000000006040c0 R14: 000000000000000c R15: ffff8801f28c7938 [ 548.623299] FS: 00007f76fca51840(0000) GS:ffff8801f6f00000(0000) knlGS:0000000000000000 [ 548.623302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 548.623304] CR2: 00007f19b9171760 CR3: 00000001ed952000 CR4: 00000000000006e0 [ 548.623317] Call Trace: [ 548.623325] ? kasan_check_read+0x11/0x20 [ 548.623330] ? __zone_watermark_ok+0x92/0x240 [ 548.623336] ? get_page_from_freelist+0x1c3/0x1d90 [ 548.623347] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 548.623353] ? warn_alloc+0x250/0x250 [ 548.623358] ? save_stack+0x46/0xd0 [ 548.623361] ? kasan_kmalloc+0xad/0xe0 [ 548.623366] ? __isolate_free_page+0x2a0/0x2a0 [ 548.623370] ? mount_fs+0x60/0x1a0 [ 548.623374] ? vfs_kern_mount+0x6b/0x1a0 [ 548.623378] ? do_mount+0x34a/0x18c0 [ 548.623383] ? ksys_mount+0x83/0xd0 [ 548.623387] ? __x64_sys_mount+0x67/0x80 [ 548.623391] ? do_syscall_64+0x78/0x170 [ 548.623396] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623401] __alloc_pages_nodemask+0x3c5/0x400 [ 548.623407] ? __alloc_pages_slowpath+0x1420/0x1420 [ 548.623412] ? __mutex_lock_slowpath+0x20/0x20 [ 548.623417] ? kvmalloc_node+0x31/0x80 [ 548.623424] alloc_pages_current+0x75/0x110 [ 548.623436] kmalloc_order+0x24/0x60 [ 548.623442] kmalloc_order_trace+0x24/0xb0 [ 548.623448] __kmalloc_track_caller+0x207/0x220 [ 548.623455] ? f2fs_build_node_manager+0x399/0xbb0 [ 548.623460] kmemdup+0x20/0x50 [ 548.623465] f2fs_build_node_manager+0x399/0xbb0 [ 548.623470] f2fs_fill_super+0x195e/0x2b40 [ 548.623477] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623481] ? set_blocksize+0x90/0x140 [ 548.623486] mount_bdev+0x1c5/0x210 [ 548.623489] ? f2fs_commit_super+0x1b0/0x1b0 [ 548.623495] f2fs_mount+0x15/0x20 [ 548.623498] mount_fs+0x60/0x1a0 [ 548.623503] ? alloc_vfsmnt+0x309/0x360 [ 548.623508] vfs_kern_mount+0x6b/0x1a0 [ 548.623513] do_mount+0x34a/0x18c0 [ 548.623518] ? lockref_put_or_lock+0xcf/0x160 [ 548.623523] ? copy_mount_string+0x20/0x20 [ 548.623528] ? memcg_kmem_put_cache+0x1b/0xa0 [ 548.623533] ? kasan_check_write+0x14/0x20 [ 548.623537] ? _copy_from_user+0x6a/0x90 [ 548.623542] ? memdup_user+0x42/0x60 [ 548.623547] ksys_mount+0x83/0xd0 [ 548.623552] __x64_sys_mount+0x67/0x80 [ 548.623557] do_syscall_64+0x78/0x170 [ 548.623562] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 548.623566] RIP: 0033:0x7f76fc331b9a [ 548.623567] Code: 48 8b 0d 01 c3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ce c2 2b 00 f7 d8 64 89 01 48 [ 548.623632] RSP: 002b:00007ffd4f0a0e48 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 548.623636] RAX: ffffffffffffffda RBX: 000000000146c030 RCX: 00007f76fc331b9a [ 548.623639] RDX: 000000000146c210 RSI: 000000000146df30 RDI: 0000000001474ec0 [ 548.623641] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013 [ 548.623643] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000000001474ec0 [ 548.623646] R13: 000000000146c210 R14: 0000000000000000 R15: 0000000000000003 [ 548.623650] ---[ end trace 4ce02f25ff7d3df5 ]--- [ 548.623656] F2FS-fs (loop0): Failed to initialize F2FS node manager [ 548.627936] F2FS-fs (loop0): Invalid log blocks per segment (8201) [ 548.627940] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 548.635835] F2FS-fs (loop0): Failed to initialize F2FS node manager - Location https://elixir.bootlin.com/linux/v4.18-rc1/source/fs/f2fs/segment.c#L3578 sit_i->sit_bitmap = kmemdup(src_bitmap, bitmap_size, GFP_KERNEL); Buffer overrun happens when doing memcpy. I suspect there is missing (inconsistent) checks on bitmap_size. Reported by Wen Xu (wen.xu@gatech.edu) from SSLab, Gatech. Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Zumeng Chen authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit c2b1509c ] Use devm_elk_get() to let Linux manage struct clk memory to avoid the following memory leakage report: unreferenced object 0xdd75efc0 (size 64): comm "systemd-udevd", pid 186, jiffies 4294945126 (age 1195.750s) hex dump (first 32 bytes): 61 64 63 5f 74 73 63 5f 66 63 6b 00 00 00 00 00 adc_tsc_fck..... 00 00 00 00 92 03 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c0a15260>] kmemleak_alloc+0x40/0x74 [<c0287a10>] __kmalloc_track_caller+0x198/0x388 [<c0255610>] kstrdup+0x40/0x5c [<c025565c>] kstrdup_const+0x30/0x3c [<c0636630>] __clk_create_clk+0x60/0xac [<c0630918>] clk_get_sys+0x74/0x144 [<c0630cdc>] clk_get+0x5c/0x68 [<bf0ac540>] ti_tscadc_probe+0x260/0x468 [ti_am335x_tscadc] [<c06f3c0c>] platform_drv_probe+0x60/0xac [<c06f1abc>] driver_probe_device+0x214/0x2dc [<c06f1c18>] __driver_attach+0x94/0xc0 [<c06efe2c>] bus_for_each_dev+0x90/0xa0 [<c06f1470>] driver_attach+0x28/0x30 [<c06f1030>] bus_add_driver+0x184/0x1ec [<c06f2b74>] driver_register+0xb0/0xf0 [<c06f3b4c>] __platform_driver_register+0x40/0x54 Signed-off-by:
Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit 46583e8c ] When attaching a device to an IOMMU group with CONFIG_DEBUG_ATOMIC_SLEEP=y: BUG: sleeping function called from invalid context at mm/slab.h:421 in_atomic(): 1, irqs_disabled(): 128, pid: 61, name: kworker/1:1 ... Call trace: ... arm_lpae_alloc_pgtable+0x114/0x184 arm_64_lpae_alloc_pgtable_s1+0x2c/0x128 arm_32_lpae_alloc_pgtable_s1+0x40/0x6c alloc_io_pgtable_ops+0x60/0x88 ipmmu_attach_device+0x140/0x334 ipmmu_attach_device() takes a spinlock, while arm_lpae_alloc_pgtable() allocates memory using GFP_KERNEL. Originally, the ipmmu-vmsa driver had its own custom page table allocation implementation using GFP_ATOMIC, hence the spinlock was fine. Fix this by replacing the spinlock by a mutex, like the arm-smmu driver does. Fixes: f20ed39f ("iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Nick Dyer authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit 36f5d9ef ] The driver only registers one input device, which uses the screen parameters from the first T9 instance. The first T63 instance also uses those parameters. It is incorrect to send input reports from the second instances of these objects if they are enabled: the input scaling will be wrong and the positions will be mashed together. This also causes problems on Android if the number of slots exceeds 32. In the future, this could be handled by looking for enabled touch object instances and creating an input device for each one. Signed-off-by:
Nick Dyer <nick.dyer@itdev.co.uk> Acked-by:
Benson Leung <bleung@chromium.org> Acked-by:
Yufeng Shen <miletus@chromium.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Petr Machata authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit 08193d1a ] The function dcb_app_lookup walks the list of specified DCB APP entries, looking for one that matches a given criteria: ifindex, selector, protocol ID and optionally also priority. The "don't care" value for priority is set to 0, because that priority has not been allowed under CEE regime, which predates the IEEE standardization. Under IEEE, 0 is a valid priority number. But because dcb_app_lookup considers zero a wild card, attempts to add an APP entry with priority 0 fail when other entries exist for a given ifindex / selector / PID triplet. Fix by changing the wild-card value to -1. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Nicholas Mc Guire authored
BugLink: https://bugs.launchpad.net/bugs/1798539 [ Upstream commit b1259519 ] The call to of_find_node_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Signed-off-by:
-
