Improve example by: dropping unrelated properties (status and cs-gpios)
and using generic node name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reference the spi-peripheral-props.yaml schema to allow using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As the maintainer email no longer exists, change it to myself.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005085044.204701-2-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As the maintainer email no longer exists, change it to myself.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005085044.204701-1-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-13-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-12-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In order to drop the internal lock usage we needed two different things:

1) The first place where 'mlock' was being used was a typical case where
iio_device_claim_direct_mode() fits perfectly.
2) In the second case, it was being used to prevent concurrent accesses
to the device and shared data but nothing was being enforced with
regards to buffering (i.e, there was nothing preventing from changing
the conversion mode while buffering). Hence, in this case, a new lock
was introduced in the state structure.

Note that the goal is not to introduce any functional change and that is
the reason why a new lock was introduced to guarantee 2).

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-11-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This is a precursor change to make it simpler to remove the 'mlock'
usage. Having the code in it's own helper function, also makes it easier
to read the error paths.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-10-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-9-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221004134909.1692021-8-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-7-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-6-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-5-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-4-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-3-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

'mlock' was being grabbed when setting the device frequency. In order to
not introduce any functional change a new lock is added. With that in
mind, the lock also needs to be grabbed in the places where 'mlock' is
since it was also being used to protect st->config against the current
device state.

On the other places the lock was being used, we can just drop
it since we are only doing one i2c bus read/write which is already
safe.

While at it, properly include "mutex.h" for mutex related APIs.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-2-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863b ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:

SPI driver ad7124 has no spi_device_id for adi,ad7124-4
SPI driver ad7124 has no spi_device_id for adi,ad7124-8

Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-6-weiyongjun@huaweicloud.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863b ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:

SPI driver ad7192 has no spi_device_id for adi,ad7190
SPI driver ad7192 has no spi_device_id for adi,ad7193
SPI driver ad7192 has no spi_device_id for adi,ad7195

Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-5-weiyongjun@huaweicloud.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863b ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:

SPI driver ad9467 has no spi_device_id for adi,ad9265
SPI driver ad9467 has no spi_device_id for adi,ad9434

Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-4-weiyongjun@huaweicloud.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863b ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:

SPI driver sca3300 has no spi_device_id for murata,scl3300

Add spi_device_id entries to silence the warning, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Tomas Melin <tomas.melin@vaisala.com>
Link: https://lore.kernel.org/r/20220921163620.805879-3-weiyongjun@huaweicloud.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863b ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:

SPI driver ads131e08 has no spi_device_id for ti,ads131e04
SPI driver ads131e08 has no spi_device_id for ti,ads131e06

Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-2-weiyongjun@huaweicloud.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927064841.319291-1-yangyingliang@huawei.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add read/write attribute for proximity integration time, and read
attribute for available proximity integration times for the vcnl4040
chip.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220926091900.1724105-3-marten.lindahl@axis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As the vcnl4040 and vcnl4200 chip uses runtime power management for
turning the ambient light and proximity sensors on/off, it overwrites
the entire register each time. In ALS_CONF register bit fields ALS_IT,
ALS_PERS, ALS_INT_EN are overwritten. In PS_CONF1 register bit fields
PS_DUTY, PS_PERS, PS_IT, PS_HD, and PS_INT are overwritten.

Add functions for preserving the affected bit fields when changing power
state.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220926091900.1724105-2-marten.lindahl@axis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ADMV8818_SW_IN_WR0_MSK and ADMV8818_SW_OUT_WR0_MSK have 3 bits,
which means a length of 8, but freq_range_hpf and freq_range_lpf
array size is 4, may end up reading 4 elements beyond the end of
those arrays.

Check value first before access freq_range_hpf and freq_range_lpf
to harden against the hardware allowing out of range values.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20220922115848.1800021-1-weiyongjun@huaweicloud.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for setting the Programmable Gain Amplifiers by adjust the
scale value.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220922194639.1118971-1-marcus.folkesson@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The current EINVAL value is more applicable to embedded library, where
user can actually put the fixed value to the sensor. In case of the
driver if the value of the channel is invalid it is better in inform
userspace that Channel was out of range as that implies more to internal
driver error than invalid input. It also makes for easier debugging of
where the error comes from during the development.
Signed-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/565d4df2592d751dc0f40908f2569b7c9af8e56e.1663834141.git.cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Allow users to read sensor sampling frequency to better plan the
application measurement requests.
Signed-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/0bd6d6d665b4bd39e4565f6f44cb1bdc03386e23.1663834141.git.cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The sensor can operate in lower power modes and even make measurements when
in those lower powered modes. The decision was taken that if measurement
is not requested within 2 seconds the sensor will remain in SLEEP_STEP
power mode, where measurements are triggered on request with setting the
start of measurement bit (SOB). In this mode the measurements are taking
a bit longer because we need to start it and complete it. Currently, in
continuous mode we read ready data and this mode is activated if sensor
measurement is requested within 2 seconds. The suspend timeout is
increased to 6 seconds (instead of 3 before), because that enables more
measurements in lower power mode (SLEEP_STEP), with the lowest refresh
rate (2 seconds).
Signed-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/be405068f081f2d518843897b13cd0289c280b5d.1663834141.git.cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20220921023915.47300-1-yuancan@huawei.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Drop 'mlock' usage by making use of iio_device_claim_direct_mode().
This change actually makes sure we cannot do a single conversion while
buffering is enable. Note there was a potential race in the previous
code since we were only acquiring the lock after checking if the bus is
enabled.

Fixes: af300848 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: <Stable@vger.kernel.org> #No rush as race is very old.
Link: https://lore.kernel.org/r/20220920112821.975359-2-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Pull fbdev fixes from Helge Deller:
 "A use-after-free bugfix in the smscufx driver and various minor error
  path fixes, smaller build fixes, sysfs fixes and typos in comments in
  the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb
  drivers"

* tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: cyber2000fb: fix missing pci_disable_device()
  fbdev: sisfb: use explicitly signed char
  fbdev: smscufx: Fix several use-after-free bugs
  fbdev: xilinxfb: Make xilinxfb_release() return void
  fbdev: sisfb: fix repeated word in comment
  fbdev: gbefb: Convert sysfs snprintf to sysfs_emit
  fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit
  fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards
  fbdev: da8xx-fb: Fix error handling in .remove()
  fbdev: MIPS supports iomem addresses

Pull char/misc fixes from Greg KH:
 "Some small driver fixes for 6.1-rc3.  They include:

   - iio driver bugfixes

   - counter driver bugfixes

   - coresight bugfixes, including a revert and then a second fix to get
     it right.

  All of these have been in linux-next with no reported problems"

* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  misc: sgi-gru: use explicitly signed char
  coresight: cti: Fix hang in cti_disable_hw()
  Revert "coresight: cti: Fix hang in cti_disable_hw()"
  counter: 104-quad-8: Fix race getting function mode and direction
  counter: microchip-tcb-capture: Handle Signal1 read and Synapse
  coresight: cti: Fix hang in cti_disable_hw()
  coresight: Fix possible deadlock with lock dependency
  counter: ti-ecap-capture: fix IS_ERR() vs NULL check
  counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
  iio: bmc150-accel-core: Fix unsafe buffer attributes
  iio: adxl367: Fix unsafe buffer attributes
  iio: adxl372: Fix unsafe buffer attributes
  iio: at91-sama5d2_adc: Fix unsafe buffer attributes
  iio: temperature: ltc2983: allocate iio channels once
  tools: iio: iio_utils: fix digit calculation
  iio: adc: stm32-adc: fix channel sampling time init
  iio: adc: mcp3911: mask out device ID in debug prints
  iio: adc: mcp3911: use correct id bits
  iio: adc: mcp3911: return proper error code on failure to allocate trigger
  iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
  ...

Pull USB fixes from Greg KH:
 "A few small USB fixes for 6.1-rc3. Include in here are:

   - MAINTAINERS update, including a big one for the USB gadget
     subsystem. Many thanks to Felipe for all of the years of hard work
     he has done on this codebase, it was greatly appreciated.

   - dwc3 driver fixes for reported problems.

   - xhci driver fixes for reported problems.

   - typec driver fixes for minor issues

   - uvc gadget driver change, and then revert as it wasn't relevant for
     6.1-final, as it is a new feature and people are still reviewing
     and modifying it.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Don't set IMI for no_interrupt
  usb: dwc3: gadget: Stop processing more requests on IMI
  Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
  xhci: Remove device endpoints from bandwidth list when freeing the device
  xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
  xhci: Add quirk to reset host back to default state at shutdown
  usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
  usb: dwc3: st: Rely on child's compatible instead of name
  usb: gadget: uvc: limit isoc_sg to super speed gadgets
  usb: bdc: change state when port disconnected
  usb: typec: ucsi: acpi: Implement resume callback
  usb: typec: ucsi: Check the connection on resume
  usb: gadget: aspeed: Fix probe regression
  usb: gadget: uvc: fix sg handling during video encode
  usb: gadget: uvc: fix sg handling in error case
  usb: gadget: uvc: fix dropped frame after missed isoc
  usb: dwc3: gadget: Don't delay End Transfer on delayed_status
  usb: dwc3: Don't switch OTG -> peripheral if extcon is present
  MAINTAINERS: Update maintainers for broadcom USB
  MAINTAINERS: move USB gadget and phy entries under the main USB entry

Pull gpio fixes from Bartosz Golaszewski:

 - convert gpio-tegra to using an immutable irqchip

 - MAINTAINERS update

* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  MAINTAINERS: Change myself to a maintainer
  gpio: tegra: Convert to immutable irq chip

Pull perf fixes from Borislav Petkov:

 - Rename a perf memory level event define to denote it is of CXL type

 - Add Alder and Raptor Lakes support to RAPL

 - Make sure raw sample data is output with tracepoints

* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
  perf/x86/rapl: Add support for Intel Raptor Lake
  perf/x86/rapl: Add support for Intel AlderLake-N
  perf: Fix missing raw data on tracepoint events

Merge tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Remove unused kernel stack padding, fix some build errors/warnings and
  two bugs in laptop platform driver"

* tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  platform/loongarch: laptop: Fix possible UAF and simplify generic_acpi_laptop_init()
  platform/loongarch: laptop: Adjust resume order for loongson_hotkey_resume()
  LoongArch: BPF: Avoid declare variables in switch-case
  LoongArch: Use flexible-array member instead of zero-length array
  LoongArch: Remove unused kernel stack padding

Pull cifs fixes from Steve French:

 - use after free fix for reconnect race

 - two memory leak fixes

* tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix use-after-free caused by invalid pointer `hostname`
  cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()
  cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()

Pull random number generator fix from Jason Donenfeld:
 "One fix from Jean-Philippe Brucker, addressing a regression in which
  early boot code on ARM64 would use the non-_early variant of the
  arch_get_random family of functions, resulting in the architectural
  random number generator appearing unavailable during that early phase
  of boot.

  The fix simply changes arch_get_random*() to arch_get_random*_early().

  This distinction between these two functions is a bit of an old wart
  I'm not a fan of, and for 6.2 I'll see if I can make obsolete the
  _early variant, so that one function does the right thing in all
  contexts without overhead"

* tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: use arch_get_random*_early() in random_init()