- 27 Apr, 2022 2 commits
-
-
Matt Roper authored
The IDs added here are the subset reserved for 'motherboard down' designs of DG2. We have all the necessary support upstream to enable these now (although they'll continue to require force_probe until the usual requirements are met). The remaining DG2 IDs for add-in cards will come in a future patch once some additional required functionality has fully landed. Bspec: 44477 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com
-
Imre Deak authored
To avoid AUX timeouts and subsequent spurious hotplug interrupts, make sure that the first DPCD access during detection is a read from an LTTPR register. Some ADLP DP link configuration at least with multiple LTTPRs expects the first DPCD access during the LTTPR/DPCD detection after hotplug to be a read from the LTTPR range starting with DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV. The side effect of this read is to put each LTTPR into the LTTPR transparent or LTTPR non-transparent mode. The lack of the above read may leave some of the LTTPRs in non-LTTPR mode, while other LTTPRs in LTTPR transparent or LTTPR non-transparent mode (for instance LTTPRs after system suspend/resume that kept their mode from before suspend). Due to the different AUX timeouts the different modes imply, the DPCD access from a non-LTTPR range will timeout and lead to an LTTPR generated hotplug towards the source (which the LTTPR firmware uses to account for buggy TypeC adapters with a long wake-up delay). SYSCROS: 72939 v2: Keep DPCD read-out working on non-LTTPR platforms. v3: Summarize what and why the patch does at the beginning of the commit log. (Jani) Signed-off-by:Imre Deak <imre.deak@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220408224629.845887-1-imre.deak@intel.com
-
- 26 Apr, 2022 3 commits
-
-
Jani Nikula authored
Need to bring commit d8bb92e7 ("drm/dp: Factor out a function to probe a DPCD address") back as a dependency to further work in drm-intel-next. Signed-off-by:
-
https://github.com/intel/gvt-linuxJani Nikula authored
gvt-next-2022-04-26 - Add two missing exports of symbols when i915 debug is enabled Signed-off-by:
-
Zhi Wang authored
When CONFIG_DRM_I915_DEBUG_RUNTIME and CONFIG_DRM_I915_DEBUG_PM are enabled, two more extra symols in i915 are required to be exported. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220425220331.24865-1-zhi.a.wang@intel.comReviewed-by:
-
- 25 Apr, 2022 13 commits
-
-
Ville Syrjälä authored
Start splitting the .compute_crtc_clock() into two parts; one part does the computation, the second part does the shared dpll assignment. I want to move the actual computation part much earlier into the compute_config() phase. v2: dg2_crtc_get_shared_dpll() not needed (Jani) Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-10-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
DG2 doesn't currently used the shared_dpll stuff so let's just split it out from hsw_crtc_compute_clock() entirely. Signed-off-by:
-
Ville Syrjälä authored
Clear the dpll_hw_state when we're about disable the pipe. Previously it looks like we just left the old junk in there. Signed-off-by:
-
Ville Syrjälä authored
All .crtc_compute_clock() implementations do the same memset() to clear the dpll_hw_state (since we preserve it across intel_crtc_prepare_cleared_state()). Move the memset() to the common wrapper. Signed-off-by:
-
Ville Syrjälä authored
Move some checks into intel_dpll_crtc_compute_clock() from the caller. Avoids the caller from having to worry about all this crap. We'll also reorder the hw.enable vs. shared_dpll checks since it makes sense to sanity check that we've cleared out the old shared_dpll even if the pipe is getting disabled. Signed-off-by:
-
Ville Syrjälä authored
Pass the full atomic state+crtc rather than the redundant crtc+crtc_state pair. We already need the full atomic state in the hsw+ codepath anyway. Signed-off-by:
-
Ville Syrjälä authored
All platforms have dpll_funcs. Remove the pointless NULL checks. Signed-off-by:
-
Ville Syrjälä authored
Stop passing around the drm_device and just pass the dev_priv instead. Signed-off-by:
-
Ville Syrjälä authored
Get rid of the confusing back and forth between bools and ints in the .get_dplls() stuff. Just make everything return an int. Initial conversion done with cocci, with some manual fixups on top: @find@ identifier func !~ "get_hw_state|_is_|needed"; typedef bool; parameter list[N] P; @@ - bool + int func(P) { <... ( - return true; + return 0; | - return false; + return -EINVAL; ) ...> } @@ identifier find.func; expression list[find.N] E; expression X; @@ - if (!func(E)) + ret = func(E); + if (ret) { ... - return X; + return ret; } @@ identifier find.func; expression X; expression list[find.N] E; @@ - if (!func(E)) + ret = func(E); + if (ret) - return X; + return ret; @@ identifier find.func; expression list[find.N] E; expression O, X; typedef bool; bool B; @@ - B = func(E); - if (O && !B) + if (O) { + ret = func(E); + if (ret) - return X; + return ret; + } @@ identifier find.func; expression list[find.N] E; expression O, X; @@ - if (O && !func(E)) + if (O) { + ret = func(E); + if (ret) - return X; + return ret; + } @@ identifier find.func; expression list[find.N] E; expression X; typedef bool; bool B; @@ - B = func(E); - if (!B) + ret = func(E); + if (ret) { ... - return X; + return ret; } Signed-off-by: -
Ville Syrjälä authored
intel_fbc_check_plane() is supposed to an int, not a boolean. So replace the bogus 'return false's with the correct 'return 0's. These were accidental copy-paste mistakes when the code got moved into intel_fbc_check_plane() from somewhere else tht did return a boolean. No functional issue here since false==0. Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com>
-
Ville Syrjälä authored
plane_state->uapi.crtc is not what we want to be looking at. If bigjoiner is used hw.crtc is what tells us what crtc the plane is supposedly using. Not an actual problem on current hardware as the only FBC capable pipe (A) can't be a bigjoiner slave and thus uapi.crtc==hw.crtc always here. But when we get more FBC instances this will become actually important. Fixes: 2e6c99f8 ("drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache") Signed-off-by:
-
Imre Deak authored
Fix typo in the _SEL_FETCH_PLANE_BASE_1_B register base address. Fixes: a5523e2f ("drm/i915: Add PSR2 selective fetch registers") References: https://gitlab.freedesktop.org/drm/intel/-/issues/5400 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421162221.2261895-1-imre.deak@intel.com
-
Jani Nikula authored
Merge tag 'gvt-next-2022-04-21-for-christoph' of https://github.com/intel/gvt-linux into drm-intel-next gvt-next-2022-04-21-for-christoph - Separating the MMIO table from GVT-g. (Zhi) - GVT-g re-factor. (Christoph) - GVT-g mdev API cleanup. (Jason) - GVT-g trace/makefile cleanup. (Jani) [Jani: added #include to adapt to header refactoring in drm-intel-next] Signed-off-by:
-
- 22 Apr, 2022 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.19-rc1 UAPI Changes: Cross-subsystem Changes: - of: Create a platform_device for offb Core Changes: - edid: block read refactoring - ttm: Add common debugfs code for resource managers Driver Changes: - bridges: - adv7611: Enable DRM_BRIDGE_OP_HPD if there's an interrupt - anx7625: Fill ELD if no monitor is connected - dw_hdmi: Add General Parallel Audio support - icn6211: Add data-lanes DT property - new driver: Lontium LT9211 - nouveau: make some structures static - tidss: Reset DISPC on startup - solomon: SPI Support and DT bindings improvements Signed-off-by:Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220421065948.2pyp3j7acxtl6pz5@houat
-
- 21 Apr, 2022 21 commits
-
-
Jouni Högander authored
We have now seen panel (XMG Core 15 e21 laptop) advertizing support for Intel proprietary eDP backlight control via DPCD registers, but actually working only with legacy pwm control. This patch adds panel EDID check for possible HDR static metadata and Intel proprietary eDP backlight control is used only if that exists. Missing HDR static metadata is ignored if user specifically asks for Intel proprietary eDP backlight control via enable_dpcd_backlight parameter. v2 : - Ignore missing HDR static metadata if Intel proprietary eDP backlight control is forced via i915.enable_dpcd_backlight - Printout info message if panel is missing HDR static metadata and support for Intel proprietary eDP backlight control is detected Fixes: 4a8d7990 ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284 Cc: Lyude Paul <lyude@redhat.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Filippo Falezza <filippo.falezza@outlook.it> Cc: stable@vger.kernel.org Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Signed-off-by:
Lyude Paul <lyude@redhat.com>
-
Jason Gunthorpe authored
This is no longer used, remove it. All usages were moved over to either use container_of() from a vfio_device or to use dev_drvdata() directly on the mdev. Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by:
-
Jason Gunthorpe authored
The device creator is supposed to use the dev.groups value to add sysfs files before device_add is called, not call sysfs_create_files() after device_add() returns. This creates a race with uevent delivery where the extra attribute will not be visible. This was being done because the groups had been co-opted by the mdev driver, now that prior patches have moved the driver's groups to the struct device_driver the dev.group is properly free for use here. Signed-off-by:
-
Jason Gunthorpe authored
The last useful member in this struct is the supported_type_groups, move it to the mdev_driver and delete mdev_parent_ops. Replace it with mdev_driver as an argument to mdev_register_device() Signed-off-by:
-
Jason Gunthorpe authored
This is only used by one sample to print a fixed string that is pointless. In general, having a device driver attach sysfs attributes to the parent is horrific. This should never happen, and always leads to some kind of liftime bug as it become very difficult for the sysfs attribute to go back to any data owned by the device driver. Remove the general mechanism to create this abuse. Signed-off-by:
-
Jason Gunthorpe authored
Now that all mdev drivers directly create their own mdev_device driver and directly register with the vfio core's vfio_device_ops this is all dead code. Delete vfio_mdev.c and the mdev_parent_ops members that are connected to it. Signed-off-by:
-
Christoph Hellwig authored
The code in both files is deeply interconnected, so merge it and keep a bunch of structures and functions static. Signed-off-by:
-
Christoph Hellwig authored
This is straightforward conversion, the intel_vgpu already has a pointer to the vfio_dev, which can be replaced with the embedded structure and we can replace all the mdev_get_drvdata() with a simple container_of(). Based on an patch from Jason Gunthorpe. Signed-off-by:
-
Christoph Hellwig authored
Merge these into their only callers. Signed-off-by:
-
Christoph Hellwig authored
Pass the structure we actually care about instead of deriving it from the mdev_device in the lower level code. Signed-off-by:
-
Christoph Hellwig authored
Initialize variables at declaration time, avoid pointless gotos and cater for the fact that intel_gvt_create_vgpu can't return NULL. Signed-off-by:
-
Christoph Hellwig authored
All the dmabufs are torn down when th VGPU is released, so there is no need for extra refcounting here. Based on an patch from Jason Gunthorpe. Signed-off-by:
-
Christoph Hellwig authored
Just call the initializion and exit functions directly and remove this abstraction entirely. Signed-off-by:
-
Christoph Hellwig authored
Just call the function directly and remove a pointless wrapper. Signed-off-by:
-
Christoph Hellwig authored
Just call the functions directly. Also remove a pointless wrapper. Signed-off-by:
-
Christoph Hellwig authored
Just call the kvmgt functions directly. Signed-off-by:
-
Christoph Hellwig authored
Just open code it in the only caller. Signed-off-by:
-
Christoph Hellwig authored
Just call the code directly and move towards the callers. Signed-off-by:
-
Christoph Hellwig authored
Just open code the MSI injection in a single place instead of going through the method table. Signed-off-by:
-
Christoph Hellwig authored
Just call the function directly. Signed-off-by:
-
Christoph Hellwig authored
Just call the code to setup the opregions and EDID data directly. Signed-off-by:
-
