1. 20 Sep, 2022 13 commits
  2. 19 Sep, 2022 5 commits
  3. 16 Sep, 2022 9 commits
    • Peilin Ye's avatar
      tcp: Use WARN_ON_ONCE() in tcp_read_skb() · 96628951
      Peilin Ye authored
      Prevent tcp_read_skb() from flooding the syslog.
      Suggested-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
      Signed-off-by: default avatarPeilin Ye <peilin.ye@bytedance.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      96628951
    • David S. Miller's avatar
      Merge branch 'net-unsync-addresses-from-ports' · 34d2d336
      David S. Miller authored
      From: Benjamin Poirier <bpoirier@nvidia.com>
      To: netdev@vger.kernel.org
      Cc: Jay Vosburgh <j.vosburgh@gmail.com>,
      	Veaceslav Falico <vfalico@gmail.com>,
      	Andy Gospodarek <andy@greyhouse.net>,
      	"David S. Miller" <davem@davemloft.net>,
      	Eric Dumazet <edumazet@google.com>,
      	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
      	Jiri Pirko <jiri@resnulli.us>, Shuah Khan <shuah@kernel.org>,
      	Jonathan Toppins <jtoppins@redhat.com>,
      	linux-kselftest@vger.kernel.org
      Subject: [PATCH net v3 0/4] Unsync addresses from ports when stopping aggregated devices
      Date: Wed,  7 Sep 2022 16:56:38 +0900	[thread overview]
      Message-ID: <20220907075642.475236-1-bpoirier@nvidia.com> (raw)
      
      This series fixes similar problems in the bonding and team drivers.
      
      Because of missing dev_{uc,mc}_unsync() calls, addresses added to
      underlying devices may be leftover after the aggregated device is deleted.
      Add the missing calls and a few related tests.
      
      v2:
      * fix selftest installation, see patch 3
      
      v3:
      * Split lacpdu_multicast changes to their own patch, #1
      * In ndo_{add,del}_slave methods, only perform address list changes when
        the aggregated device is up (patches 2 & 3)
      * Add selftest function related to the above change (patch 4)
      ====================
      Acked-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34d2d336
    • Benjamin Poirier's avatar
      net: Add tests for bonding and team address list management · bbb774d9
      Benjamin Poirier authored
      Test that the bonding and team drivers clean up an underlying device's
      address lists (dev->uc, dev->mc) when the aggregated device is deleted.
      
      Test addition and removal of the LACPDU multicast address on underlying
      devices by the bonding driver.
      
      v2:
      * add lag_lib.sh to TEST_FILES
      
      v3:
      * extend bond_listen_lacpdu_multicast test to init_state up and down cases
      * remove some superfluous shell syntax and 'set dev ... up' commands
      Signed-off-by: default avatarBenjamin Poirier <bpoirier@nvidia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bbb774d9
    • Benjamin Poirier's avatar
      net: team: Unsync device addresses on ndo_stop · bd602342
      Benjamin Poirier authored
      Netdev drivers are expected to call dev_{uc,mc}_sync() in their
      ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
      This is mentioned in the kerneldoc for those dev_* functions.
      
      The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
      ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
      already been emptied in unregister_netdevice_many() before ndo_uninit is
      called. This mistake can result in addresses being leftover on former team
      ports after a team device has been deleted; see test_LAG_cleanup() in the
      last patch in this series.
      
      Add unsync calls at their expected location, team_close().
      
      v3:
      * When adding or deleting a port, only sync/unsync addresses if the team
        device is up. In other cases, it is taken care of at the right time by
        ndo_open/ndo_set_rx_mode/ndo_stop.
      
      Fixes: 3d249d4c ("net: introduce ethernet teaming device")
      Signed-off-by: default avatarBenjamin Poirier <bpoirier@nvidia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd602342
    • Benjamin Poirier's avatar
      net: bonding: Unsync device addresses on ndo_stop · 86247aba
      Benjamin Poirier authored
      Netdev drivers are expected to call dev_{uc,mc}_sync() in their
      ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
      This is mentioned in the kerneldoc for those dev_* functions.
      
      The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
      ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
      already been emptied in unregister_netdevice_many() before ndo_uninit is
      called. This mistake can result in addresses being leftover on former bond
      slaves after a bond has been deleted; see test_LAG_cleanup() in the last
      patch in this series.
      
      Add unsync calls, via bond_hw_addr_flush(), at their expected location,
      bond_close().
      Add dev_mc_add() call to bond_open() to match the above change.
      
      v3:
      * When adding or deleting a slave, only sync/unsync, add/del addresses if
        the bond is up. In other cases, it is taken care of at the right time by
        ndo_open/ndo_set_rx_mode/ndo_stop.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarBenjamin Poirier <bpoirier@nvidia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      86247aba
    • Benjamin Poirier's avatar
      net: bonding: Share lacpdu_mcast_addr definition · 1d9a143e
      Benjamin Poirier authored
      There are already a few definitions of arrays containing
      MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
      contain the same constant data so define one common instance for all
      bonding code.
      Signed-off-by: default avatarBenjamin Poirier <bpoirier@nvidia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d9a143e
    • David S. Miller's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 21be1ad6
      David S. Miller authored
      Tony Nguyen says:
      
      ====================
      Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf)
      
      This series contains updates to ice and iavf drivers.
      
      Dave removes extra unplug of auxiliary bus on reset which caused a
      scheduling while atomic to be reported for ice.
      
      Ding Hui defers setting of queues for TCs to ensure valid configuration
      and restores old config if invalid for ice.
      
      Sylwester fixes a check of setting MAC address to occur after result is
      received from PF for iavf driver.
      
      Brett changes check of ring tail to use software cached value as not all
      devices have access to register tail for iavf driver.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      21be1ad6
    • Oleksandr Mazur's avatar
      net: marvell: prestera: add support for for Aldrin2 · 9124dbcc
      Oleksandr Mazur authored
      Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.
      Signed-off-by: default avatarOleksandr Mazur <oleksandr.mazur@plvision.eu>
      
      V2:
        - retarget to net tree instead of net-next;
        - fix missed colon in patch subject ('net marvell' vs 'net: mavell');
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9124dbcc
    • Haimin Zhang's avatar
      net/ieee802154: fix uninit value bug in dgram_sendmsg · 94160108
      Haimin Zhang authored
      There is uninit value bug in dgram_sendmsg function in
      net/ieee802154/socket.c when the length of valid data pointed by the
      msg->msg_name isn't verified.
      
      We introducing a helper function ieee802154_sockaddr_check_size to
      check namelen. First we check there is addr_type in ieee802154_addr_sa.
      Then, we check namelen according to addr_type.
      
      Also fixed in raw_bind, dgram_bind, dgram_connect.
      Signed-off-by: default avatarHaimin Zhang <tcs_kernel@tencent.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      94160108
  4. 13 Sep, 2022 3 commits
    • Matthieu Baerts's avatar
      Documentation: mptcp: fix pm_type formatting · 0727a9a5
      Matthieu Baerts authored
      When looking at the rendered HTML version, we can see 'pm_type' is not
      displayed with a bold font:
      
        https://docs.kernel.org/5.19/networking/mptcp-sysctl.html
      
      The empty line under 'pm_type' is then removed to have the same style as
      the others.
      
      Fixes: 6bb63ccc ("mptcp: Add a per-namespace sysctl to set the default path manager type")
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Link: https://lore.kernel.org/r/20220906180404.1255873-2-matthieu.baerts@tessares.netSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      0727a9a5
    • Paolo Abeni's avatar
      mptcp: fix fwd memory accounting on coalesce · 7288ff6e
      Paolo Abeni authored
      The intel bot reported a memory accounting related splat:
      
      [  240.473094] ------------[ cut here ]------------
      [  240.478507] page_counter underflow: -4294828518 nr_pages=4294967290
      [  240.485500] WARNING: CPU: 2 PID: 14986 at mm/page_counter.c:56 page_counter_cancel+0x96/0xc0
      [  240.570849] CPU: 2 PID: 14986 Comm: mptcp_connect Tainted: G S                5.19.0-rc4-00739-gd24141fe #1
      [  240.581637] Hardware name: HP HP Z240 SFF Workstation/802E, BIOS N51 Ver. 01.63 10/05/2017
      [  240.590600] RIP: 0010:page_counter_cancel+0x96/0xc0
      [  240.596179] Code: 00 00 00 45 31 c0 48 89 ef 5d 4c 89 c6 41 5c e9 40 fd ff ff 4c 89 e2 48 c7 c7 20 73 39 84 c6 05 d5 b1 52 04 01 e8 e7 95 f3
      01 <0f> 0b eb a9 48 89 ef e8 1e 25 fc ff eb c3 66 66 2e 0f 1f 84 00 00
      [  240.615639] RSP: 0018:ffffc9000496f7c8 EFLAGS: 00010082
      [  240.621569] RAX: 0000000000000000 RBX: ffff88819c9c0120 RCX: 0000000000000000
      [  240.629404] RDX: 0000000000000027 RSI: 0000000000000004 RDI: fffff5200092deeb
      [  240.637239] RBP: ffff88819c9c0120 R08: 0000000000000001 R09: ffff888366527a2b
      [  240.645069] R10: ffffed106cca4f45 R11: 0000000000000001 R12: 00000000fffffffa
      [  240.652903] R13: ffff888366536118 R14: 00000000fffffffa R15: ffff88819c9c0000
      [  240.660738] FS:  00007f3786e72540(0000) GS:ffff888366500000(0000) knlGS:0000000000000000
      [  240.669529] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  240.675974] CR2: 00007f966b346000 CR3: 0000000168cea002 CR4: 00000000003706e0
      [  240.683807] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [  240.691641] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [  240.699468] Call Trace:
      [  240.702613]  <TASK>
      [  240.705413]  page_counter_uncharge+0x29/0x80
      [  240.710389]  drain_stock+0xd0/0x180
      [  240.714585]  refill_stock+0x278/0x580
      [  240.718951]  __sk_mem_reduce_allocated+0x222/0x5c0
      [  240.729248]  __mptcp_update_rmem+0x235/0x2c0
      [  240.734228]  __mptcp_move_skbs+0x194/0x6c0
      [  240.749764]  mptcp_recvmsg+0xdfa/0x1340
      [  240.763153]  inet_recvmsg+0x37f/0x500
      [  240.782109]  sock_read_iter+0x24a/0x380
      [  240.805353]  new_sync_read+0x420/0x540
      [  240.838552]  vfs_read+0x37f/0x4c0
      [  240.842582]  ksys_read+0x170/0x200
      [  240.864039]  do_syscall_64+0x5c/0x80
      [  240.872770]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
      [  240.878526] RIP: 0033:0x7f3786d9ae8e
      [  240.882805] Code: c0 e9 b6 fe ff ff 50 48 8d 3d 6e 18 0a 00 e8 89 e8 01 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
      [  240.902259] RSP: 002b:00007fff7be81e08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
      [  240.910533] RAX: ffffffffffffffda RBX: 0000000000002000 RCX: 00007f3786d9ae8e
      [  240.918368] RDX: 0000000000002000 RSI: 00007fff7be87ec0 RDI: 0000000000000005
      [  240.926206] RBP: 0000000000000005 R08: 00007f3786e6a230 R09: 00007f3786e6a240
      [  240.934046] R10: fffffffffffff288 R11: 0000000000000246 R12: 0000000000002000
      [  240.941884] R13: 00007fff7be87ec0 R14: 00007fff7be87ec0 R15: 0000000000002000
      [  240.949741]  </TASK>
      [  240.952632] irq event stamp: 27367
      [  240.956735] hardirqs last  enabled at (27366): [<ffffffff81ba50ea>] mem_cgroup_uncharge_skmem+0x6a/0x80
      [  240.966848] hardirqs last disabled at (27367): [<ffffffff81b8fd42>] refill_stock+0x282/0x580
      [  240.976017] softirqs last  enabled at (27360): [<ffffffff83a4d8ef>] mptcp_recvmsg+0xaf/0x1340
      [  240.985273] softirqs last disabled at (27364): [<ffffffff83a4d30c>] __mptcp_move_skbs+0x18c/0x6c0
      [  240.994872] ---[ end trace 0000000000000000 ]---
      
      After commit d24141fe ("mptcp: drop SK_RECLAIM_* macros"),
      if rmem_fwd_alloc become negative, mptcp_rmem_uncharge() can
      try to reclaim a negative amount of pages, since the expression:
      
      	reclaimable >= PAGE_SIZE
      
      will evaluate to true for any negative value of the int
      'reclaimable': 'PAGE_SIZE' is an unsigned long and
      the negative integer will be promoted to a (very large)
      unsigned long value.
      
      Still after the mentioned commit, kfree_skb_partial()
      in mptcp_try_coalesce() will reclaim most of just released fwd
      memory, so that following charging of the skb delta size will
      lead to negative fwd memory values.
      
      At that point a racing recvmsg() can trigger the splat.
      
      Address the issue switching the order of the memory accounting
      operations. The fwd memory can still transiently reach negative
      values, but that will happen in an atomic scope and no code
      path could touch/use such value.
      Reported-by: default avatarkernel test robot <oliver.sang@intel.com>
      Fixes: d24141fe ("mptcp: drop SK_RECLAIM_* macros")
      Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      Reviewed-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Signed-off-by: default avatarMatthieu Baerts <matthieu.baerts@tessares.net>
      Link: https://lore.kernel.org/r/20220906180404.1255873-1-matthieu.baerts@tessares.netSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      7288ff6e
    • Ioana Ciornei's avatar
      net: phy: aquantia: wait for the suspend/resume operations to finish · ca2dccde
      Ioana Ciornei authored
      The Aquantia datasheet notes that after issuing a Processor-Intensive
      MDIO operation, like changing the low-power state of the device, the
      driver should wait for the operation to finish before issuing a new MDIO
      command.
      
      The new aqr107_wait_processor_intensive_op() function is added which can
      be used after these kind of MDIO operations. At the moment, we are only
      adding it at the end of the suspend/resume calls.
      
      The issue was identified on a board featuring the AQR113C PHY, on
      which commands like 'ip link (..) up / down' issued without any delays
      between them would render the link on the PHY to remain down.
      The issue was easy to reproduce with a one-liner:
       $ ip link set dev ethX down; ip link set dev ethX up; \
       ip link set dev ethX down; ip link set dev ethX up;
      
      Fixes: ac9e81c2 ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family")
      Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      ca2dccde
  5. 12 Sep, 2022 3 commits
  6. 09 Sep, 2022 4 commits
    • Luiz Augusto von Dentz's avatar
      Bluetooth: Fix HCIGETDEVINFO regression · 35e60f1a
      Luiz Augusto von Dentz authored
      Recent changes breaks HCIGETDEVINFO since it changes the size of
      hci_dev_info.
      
      Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
      Reported-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
      Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      35e60f1a
    • Ludovic Cintrat's avatar
      net: core: fix flow symmetric hash · 64ae13ed
      Ludovic Cintrat authored
      __flow_hash_consistentify() wrongly swaps ipv4 addresses in few cases.
      This function is indirectly used by __skb_get_hash_symmetric(), which is
      used to fanout packets in AF_PACKET.
      Intrusion detection systems may be impacted by this issue.
      
      __flow_hash_consistentify() computes the addresses difference then swaps
      them if the difference is negative. In few cases src - dst and dst - src
      are both negative.
      
      The following snippet mimics __flow_hash_consistentify():
      
      ```
       #include <stdio.h>
       #include <stdint.h>
      
       int main(int argc, char** argv) {
      
           int diffs_d, diffd_s;
           uint32_t dst  = 0xb225a8c0; /* 178.37.168.192 --> 192.168.37.178 */
           uint32_t src  = 0x3225a8c0; /*  50.37.168.192 --> 192.168.37.50  */
           uint32_t dst2 = 0x3325a8c0; /*  51.37.168.192 --> 192.168.37.51  */
      
           diffs_d = src - dst;
           diffd_s = dst - src;
      
           printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
                   src, dst, diffs_d, diffs_d, diffd_s, diffd_s);
      
           diffs_d = src - dst2;
           diffd_s = dst2 - src;
      
           printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
                   src, dst2, diffs_d, diffs_d, diffd_s, diffd_s);
      
           return 0;
       }
      ```
      
      Results:
      
      src:3225a8c0 dst:b225a8c0, \
          diff(s-d)=-2147483648(0x80000000) \
          diff(d-s)=-2147483648(0x80000000)
      
      src:3225a8c0 dst:3325a8c0, \
          diff(s-d)=-16777216(0xff000000) \
          diff(d-s)=16777216(0x1000000)
      
      In the first case the addresses differences are always < 0, therefore
      __flow_hash_consistentify() always swaps, thus dst->src and src->dst
      packets have differents hashes.
      
      Fixes: c3f83241 ("net: Add full IPv6 addresses to flow_keys")
      Signed-off-by: default avatarLudovic Cintrat <ludovic.cintrat@gatewatcher.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      64ae13ed
    • Lu Wei's avatar
      ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header · 81225b2e
      Lu Wei authored
      If an AF_PACKET socket is used to send packets through ipvlan and the
      default xmit function of the AF_PACKET socket is changed from
      dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option
      name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and
      remains as the initial value of 65535, this may trigger slab-out-of-bounds
      bugs as following:
      
      =================================================================
      UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
      PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6
      ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33
      all Trace:
      print_address_description.constprop.0+0x1d/0x160
      print_report.cold+0x4f/0x112
      kasan_report+0xa3/0x130
      ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
      ipvlan_start_xmit+0x29/0xa0 [ipvlan]
      __dev_direct_xmit+0x2e2/0x380
      packet_direct_xmit+0x22/0x60
      packet_snd+0x7c9/0xc40
      sock_sendmsg+0x9a/0xa0
      __sys_sendto+0x18a/0x230
      __x64_sys_sendto+0x74/0x90
      do_syscall_64+0x3b/0x90
      entry_SYSCALL_64_after_hwframe+0x63/0xcd
      
      The root cause is:
        1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
           and skb->protocol is not specified as in packet_parse_headers()
      
        2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()
      
      In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is
      called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which
      use "skb->head + skb->mac_header", out-of-bound access occurs.
      
      This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2()
      and reset mac header in multicast to solve this out-of-bound bug.
      
      Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
      Signed-off-by: default avatarLu Wei <luwei32@huawei.com>
      Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      81225b2e
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf · df2a6017
      David S. Miller authored
      Florian Westhal says:
      
      ====================
      netfilter: bugfixes for net
      
      The following set contains four netfilter patches for your *net* tree.
      
      When there are multiple Contact headers in a SIP message its possible
      the next headers won't be found because the SIP helper confuses relative
      and absolute offsets in the message.  From Igor Ryzhov.
      
      Make the nft_concat_range self-test support socat, this makes the
      selftest pass on my test VM, from myself.
      
      nf_conntrack_irc helper can be tricked into opening a local port forward
      that the client never requested by embedding a DCC message in a PING
      request sent to the client.  Fix from David Leadbeater.
      
      Both have been broken since the kernel 2.6.x days.
      
      The 'osf' match might indicate success while it could not find
      anything, broken since 5.2 .  Fix from Pablo Neira.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df2a6017
  7. 08 Sep, 2022 3 commits
    • Brett Creeley's avatar
      iavf: Fix cached head and tail value for iavf_get_tx_pending · 809f23c0
      Brett Creeley authored
      The underlying hardware may or may not allow reading of the head or tail
      registers and it really makes no difference if we use the software
      cached values. So, always used the software cached values.
      
      Fixes: 9c6c1259 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout")
      Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
      Co-developed-by: default avatarNorbert Zulinski <norbertx.zulinski@intel.com>
      Signed-off-by: default avatarNorbert Zulinski <norbertx.zulinski@intel.com>
      Signed-off-by: default avatarMateusz Palczewski <mateusz.palczewski@intel.com>
      Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
      Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      809f23c0
    • Sylwester Dziedziuch's avatar
      iavf: Fix change VF's mac address · f66b98c8
      Sylwester Dziedziuch authored
      Previously changing mac address gives false negative because
      ip link set <interface> address <MAC> return with
      RTNLINK: Permission denied.
      In iavf_set_mac was check if PF handled our mac set request,
      even before filter was added to list.
      Because this check returns always true and it never waits for
      PF's response.
      
      Move iavf_is_mac_handled to wait_event_interruptible_timeout
      instead of false. Now it will wait for PF's response and then
      check if address was added or rejected.
      
      Fixes: 35a2443d ("iavf: Add waiting for response from PF in set mac")
      Signed-off-by: default avatarSylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
      Co-developed-by: default avatarNorbert Zulinski <norbertx.zulinski@intel.com>
      Signed-off-by: default avatarNorbert Zulinski <norbertx.zulinski@intel.com>
      Signed-off-by: default avatarMateusz Palczewski <mateusz.palczewski@intel.com>
      Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
      Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      f66b98c8
    • Ding Hui's avatar
      ice: Fix crash by keep old cfg when update TCs more than queues · a509702c
      Ding Hui authored
      There are problems if allocated queues less than Traffic Classes.
      
      Commit a632b2a4 ("ice: ethtool: Prohibit improper channel config
      for DCB") already disallow setting less queues than TCs.
      
      Another case is if we first set less queues, and later update more TCs
      config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty
      num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access.
      
      [   95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated.
      [   95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)!
      [   95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0
      [   95.969621] general protection fault: 0000 [#1] SMP NOPTI
      [   95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G     U  W  O     --------- -t - 4.18.0 #1
      [   95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021
      [   95.969992] RIP: 0010:devm_kmalloc+0xa/0x60
      [   95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c
      [   95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206
      [   95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0
      [   95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200
      [   95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000
      [   95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100
      [   95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460
      [   95.970981] FS:  00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000
      [   95.971108] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [   95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0
      [   95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [   95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [   95.971530] PKRU: 55555554
      [   95.971573] Call Trace:
      [   95.971622]  ice_setup_rx_ring+0x39/0x110 [ice]
      [   95.971695]  ice_vsi_setup_rx_rings+0x54/0x90 [ice]
      [   95.971774]  ice_vsi_open+0x25/0x120 [ice]
      [   95.971843]  ice_open_internal+0xb8/0x1f0 [ice]
      [   95.971919]  ice_ena_vsi+0x4f/0xd0 [ice]
      [   95.971987]  ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice]
      [   95.972082]  ice_pf_dcb_cfg+0x29a/0x380 [ice]
      [   95.972154]  ice_dcbnl_setets+0x174/0x1b0 [ice]
      [   95.972220]  dcbnl_ieee_set+0x89/0x230
      [   95.972279]  ? dcbnl_ieee_del+0x150/0x150
      [   95.972341]  dcb_doit+0x124/0x1b0
      [   95.972392]  rtnetlink_rcv_msg+0x243/0x2f0
      [   95.972457]  ? dcb_doit+0x14d/0x1b0
      [   95.972510]  ? __kmalloc_node_track_caller+0x1d3/0x280
      [   95.972591]  ? rtnl_calcit.isra.31+0x100/0x100
      [   95.972661]  netlink_rcv_skb+0xcf/0xf0
      [   95.972720]  netlink_unicast+0x16d/0x220
      [   95.972781]  netlink_sendmsg+0x2ba/0x3a0
      [   95.975891]  sock_sendmsg+0x4c/0x50
      [   95.979032]  ___sys_sendmsg+0x2e4/0x300
      [   95.982147]  ? kmem_cache_alloc+0x13e/0x190
      [   95.985242]  ? __wake_up_common_lock+0x79/0x90
      [   95.988338]  ? __check_object_size+0xac/0x1b0
      [   95.991440]  ? _copy_to_user+0x22/0x30
      [   95.994539]  ? move_addr_to_user+0xbb/0xd0
      [   95.997619]  ? __sys_sendmsg+0x53/0x80
      [   96.000664]  __sys_sendmsg+0x53/0x80
      [   96.003747]  do_syscall_64+0x5b/0x1d0
      [   96.006862]  entry_SYSCALL_64_after_hwframe+0x65/0xca
      
      Only update num_txq/rxq when passed check, and restore tc_cfg if setup
      queue map failed.
      
      Fixes: a632b2a4 ("ice: ethtool: Prohibit improper channel config for DCB")
      Signed-off-by: default avatarDing Hui <dinghui@sangfor.com.cn>
      Reviewed-by: default avatarAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
      Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
      Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      a509702c