Calls to thermal_zone_get_temp() are not protected against thermal zone
device removal. As result, it is possible that the thermal zone operations
callbacks are no longer valid when thermal_zone_get_temp() is called.
This may result in crashes such as

BUG: unable to handle page fault for address: ffffffffc04ef420
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
PGD 5d60e067 P4D 5d60e067 PUD 5d610067 PMD 110197067 PTE 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 3209 Comm: cat Tainted: G        W         5.10.136-19389-g615abc6eb807 #1 02df41ac0b12f3a64f4b34245188d8875bb3bce1
Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.92.0 11/27/2018
RIP: 0010:thermal_zone_get_temp+0x26/0x73
Code: 89 c3 eb d3 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 85 ff 74 50 48 89 fb 48 81 ff 00 f0 ff ff 77 44 48 8b 83 98 03 00 00 <48> 83 78 10 00 74 36 49 89 f6 4c 8d bb d8 03 00 00 4c 89 ff e8 9f
RSP: 0018:ffffb3758138fd38 EFLAGS: 00010287
RAX: ffffffffc04ef410 RBX: ffff98f14d7fb000 RCX: 0000000000000000
RDX: ffff98f17cf90000 RSI: ffffb3758138fd64 RDI: ffff98f14d7fb000
RBP: ffffb3758138fd50 R08: 0000000000001000 R09: ffff98f17cf90000
R10: 0000000000000000 R11: ffffffff8dacad28 R12: 0000000000001000
R13: ffff98f1793a7d80 R14: ffff98f143231708 R15: ffff98f14d7fb018
FS:  00007ec166097800(0000) GS:ffff98f1bbd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc04ef420 CR3: 000000010ee9a000 CR4: 00000000003506e0
Call Trace:
 temp_show+0x31/0x68
 dev_attr_show+0x1d/0x4f
 sysfs_kf_seq_show+0x92/0x107
 seq_read_iter+0xf5/0x3f2
 vfs_read+0x205/0x379
 __x64_sys_read+0x7c/0xe2
 do_syscall_64+0x43/0x55
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

if a thermal device is removed while accesses to its device attributes
are ongoing.

The problem is exposed by code in iwl_op_mode_mvm_start(), which registers
a thermal zone device only to unregister it shortly afterwards if an
unrelated failure is encountered while accessing the hardware.

Check if the thermal zone device is registered after acquiring the
thermal zone device mutex to ensure this does not happen.

The code was tested by triggering the failure in iwl_op_mode_mvm_start()
on purpose. Without this patch, the kernel crashes reliably. The crash
is no longer observed after applying this and the preceding patches.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Thermal device attributes may still be opened after unregistering
the thermal zone and deleting the thermal device.

Currently there is no protection against accessing thermal device
operations after unregistering a thermal zone. To enable adding
such protection, protect the device delete operation with the
thermal zone device mutex. This requires splitting the call to
device_unregister() into its components, device_del() and put_device().
Only the first call can be executed under mutex protection, since
put_device() may result in releasing the thermal zone device memory.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Accesses to thermal zones, and with it the thermal zone device mutex,
are still possible after the thermal zone device has been unregistered.
For example, thermal_zone_get_temp() can be called from temp_show()
in thermal_sysfs.c if the sysfs attribute was opened before the thermal
device was unregistered.

Move the call to mutex_destroy from thermal_zone_device_unregister()
to thermal_release() to ensure that it is only destroyed after it is
guaranteed to be no longer accessed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Return an error pointer if ->get_max_state() fails.  The current code
returns NULL which will cause an oops in the callers.

Fixes: c408b3d1 ("thermal: Validate new state in cur_state_store()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Now that the cooling device structure stores the max_state value, reuse
it and drop max_states from struct cooling_dev_stats.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In cur_state_store(), the new state of the cooling device is received
from user-space and is not validated by the thermal core but the same is
left for the individual drivers to take care of. Apart from duplicating
the code it leaves possibility for introducing bugs where a driver may
not do it right.

Lets make the thermal core check the new state itself and store the max
value in the cooling device structure.

Link: https://lore.kernel.org/all/Y0ltRJRjO7AkawvE@kili/Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull kvm fixes from Paolo Bonzini:
 "RISC-V:

   - Fix compilation without RISCV_ISA_ZICBOM

   - Fix kvm_riscv_vcpu_timer_pending() for Sstc

  ARM:

   - Fix a bug preventing restoring an ITS containing mappings for very
     large and very sparse device topology

   - Work around a relocation handling error when compiling the nVHE
     object with profile optimisation

   - Fix for stage-2 invalidation holding the VM MMU lock for too long
     by limiting the walk to the largest block mapping size

   - Enable stack protection and branch profiling for VHE

   - Two selftest fixes

  x86:

   - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl

  selftests:

   - synchronize includes between include/uapi and tools/include/uapi"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools: include: sync include/api/linux/kvm.h
  KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
  KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
  kvm: Add support for arch compat vm ioctls
  RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
  RISC-V: Fix compilation without RISCV_ISA_ZICBOM
  KVM: arm64: vgic: Fix exit condition in scan_its_table()
  KVM: arm64: nvhe: Fix build with profile optimization
  KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
  KVM: arm64: selftests: Fix multiple versions of GIC creation
  KVM: arm64: Enable stack protection and branch profiling for VHE
  KVM: arm64: Limit stage2_apply_range() batch size to largest block
  KVM: arm64: Work out supported block level at compile time

This reverts commit 72a95859.

It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver.  Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.

Fixes: 72a95859 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.

Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c.  But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes: bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Borislav Petkov:

 - Fix raw data handling when perf events are used in bpf

 - Rework how SIGTRAPs get delivered to events to address a bunch of
   problems with it. Add a selftest for that too

* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bpf: Fix sample_flags for bpf_perf_event_output
  selftests/perf_events: Add a SIGTRAP stress test with disables
  perf: Fix missing SIGTRAPs

Pull scheduler fixes from Borislav Petkov:

 - Adjust code to not trip up CFI

 - Fix sched group cookie matching

* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Introduce struct balance_callback to avoid CFI mismatches
  sched/core: Fix comparison in sched_group_cookie_match()

Pull objtool fix from Borislav Petkov:

 - Fix ORC stack unwinding when GCOV is enabled

* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix unreliable stack dump with gcov

Pull x86 fixes from Borislav Petkov:
 "As usually the case, right after a major release, the tip urgent
  branches accumulate a couple more fixes than normal. And here is the
  x86, a bit bigger, urgent pile.

   - Use the correct CPU capability clearing function on the error path
     in Intel perf LBR

   - A CFI fix to ftrace along with a simplification

   - Adjust handling of zero capacity bit mask for resctrl cache
     allocation on AMD

   - A fix to the AMD microcode loader to attempt patch application on
     every logical thread

   - A couple of topology fixes to handle CPUID leaf 0x1f enumeration
     info properly

   - Drop a -mabi=ms compiler option check as both compilers support it
     now anyway

   - A couple of fixes to how the initial, statically allocated FPU
     buffer state is setup and its interaction with dynamic states at
     runtime"

* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
  perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
  ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
  x86/ftrace: Remove ftrace_epilogue()
  x86/resctrl: Fix min_cbm_bits for AMD
  x86/microcode/AMD: Apply the patch early on every logical thread
  x86/topology: Fix duplicated core ID within a package
  x86/topology: Fix multiple packages shown on a single-package system
  hwmon/coretemp: Handle large core ID value
  x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
  x86/fpu: Exclude dynamic states from init_fpstate
  x86/fpu: Fix the init_fpstate size check with the actual size
  x86/fpu: Configure init_fpstate attributes orderly

Pull io_uring follow-up from Jens Axboe:
 "Currently the zero-copy has automatic fallback to normal transmit, and
  it was decided that it'd be cleaner to return an error instead if the
  socket type doesn't support it.

  Zero-copy does work with UDP and TCP, it's more of a future proofing
  kind of thing (eg for samba)"

* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
  io_uring/net: fail zc sendmsg when unsupported by socket
  io_uring/net: fail zc send when unsupported by socket
  net: flag sockets supporting msghdr originated zerocopy

Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - corsair-psu: Fix typo in USB id description, and add USB ID for new
   PSU

 - pwm-fan: Fix fan power handling when disabling fan control

* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (corsair-psu) Add USB id of the new HX1500i psu
  hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
  hwmon: (corsair-psu) fix typo in USB id description

Pull i2c fixes from Wolfram Sang:
 "RPM fix for qcom-cci, platform module alias for xiic, build warning
  fix for mlxbf, typo fixes in comments"

* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxbf: depend on ACPI; clean away ifdeffage
  i2c: fix spelling typos in comments
  i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
  i2c: xiic: Add platform module alias

Pull pci fixes from Bjorn Helgaas:

 - Revert a simplification that broke pci-tegra due to a masking error

 - Update MAINTAINERS for Kishon's email address change and TI
   DRA7XX/J721E maintainer change

* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
  MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
  Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"

Pull missed media updates from Mauro Carvalho Chehab:
 "It seems I screwed-up my previous pull request: it ends up that only
  half of the media patches that were in linux-next got merged in -rc1.

  The script which creates the signed tags silently failed due to
  5.19->6.0 so it ended generating a tag with incomplete stuff.

  So here are the missing parts:

   - a DVB core security fix

   - lots of fixes and cleanups for atomisp staging driver

   - old drivers that are VB1 are being moved to staging to be
     deprecated

   - several driver updates - mostly for embedded systems, but there are
     also some things addressing issues with some PC webcams, in the UVC
     video driver"

* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
  media: sun6i-csi: Move csi buffer definition to main header file
  media: sun6i-csi: Introduce and use video helper functions
  media: sun6i-csi: Add media ops with link notify callback
  media: sun6i-csi: Remove controls handler from the driver
  media: sun6i-csi: Register the media device after creation
  media: sun6i-csi: Pass and store csi device directly in video code
  media: sun6i-csi: Tidy up video code
  media: sun6i-csi: Tidy up v4l2 code
  media: sun6i-csi: Tidy up Kconfig
  media: sun6i-csi: Use runtime pm for clocks and reset
  media: sun6i-csi: Define and use variant to get module clock rate
  media: sun6i-csi: Always set exclusive module clock rate
  media: sun6i-csi: Tidy up platform code
  media: sun6i-csi: Refactor main driver data structures
  media: sun6i-csi: Define and use driver name and (reworked) description
  media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  ...

The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Also update the documentation accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomainSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.

Fixes: 17601bfe ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.

This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254 ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM/riscv fixes for 6.1, take #1

- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc

Merge tag 'kvmarm-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #2

- Fix a bug preventing restoring an ITS containing mappings
  for very large and very sparse device topology

- Work around a relocation handling error when compiling
  the nVHE object with profile optimisation

Merge tag 'kvmarm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #1

- Fix for stage-2 invalidation holding the VM MMU lock
  for too long by limiting the walk to the largest
  block mapping size

- Enable stack protection and branch profiling for VHE

- Two selftest fixes

Pull thermal control fix from Rafael Wysocki:
 "This fixes the control CPU selection in the intel_powerclamp thermal
  driver"

* tag 'thermal-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel_powerclamp: Use first online CPU as control_cpu

Pull power management fixes from Rafael Wysocki:
 "These fix some issues and clean up code in ARM cpufreq drivers.

  Specifics:

   - Fix module loading in the Tegra124 cpufreq driver (Jon Hunter)

   - Fix memory leak and update to read-only region in the qcom cpufreq
     driver (Fabien Parent)

   - Miscellaneous minor cleanups to cpufreq drivers (Fabien Parent,
     Yang Yingliang)"

* tag 'pm-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: sun50i: Switch to use dev_err_probe() helper
  cpufreq: qcom-nvmem: Switch to use dev_err_probe() helper
  cpufreq: imx6q: Switch to use dev_err_probe() helper
  cpufreq: dt: Switch to use dev_err_probe() helper
  cpufreq: qcom: remove unused parameter in function definition
  cpufreq: qcom: fix writes in read-only memory region
  cpufreq: qcom: fix memory leak in error path
  cpufreq: tegra194: Fix module loading

Pull ACPI fixes from Rafael Wysocki:
 "These fix issues introduced during this merge window (ACPI/PCI, device
  enumeration and documentation) and some other ones found recently.

  Specifics:

   - Add missing device reference counting to acpi_get_pci_dev() after
     changing it recently (Rafael Wysocki)

   - Fix resource list walk in acpi_dma_get_range() (Robin Murphy)

   - Add IRQ override quirk for LENOVO IdeaPad and extend the IRQ
     override warning message (Jiri Slaby)

   - Fix integer overflow in ghes_estatus_pool_init() (Ashish Kalra)

   - Fix multiple error records handling in one of the ACPI extlog
     driver code paths (Tony Luck)

   - Prune DSDT override documentation from index after dropping it
     (Bagas Sanjaya)"

* tag 'acpi-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: scan: Fix DMA range assignment
  ACPI: PCI: Fix device reference counting in acpi_get_pci_dev()
  ACPI: resource: note more about IRQ override
  ACPI: resource: do IRQ override on LENOVO IdeaPad
  ACPI: extlog: Handle multiple records
  ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init()
  Documentation: ACPI: Prune DSDT override documentation from index

Pull EFI fixes from Ard Biesheuvel:

 - fixes for the EFI variable store refactor that landed in v6.0

 - fixes for issues that were introduced during the merge window

 - back out some changes related to EFI zboot signing - we'll add a
   better solution for this during the next cycle

* tag 'efi-fixes-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: runtime: Don't assume virtual mappings are missing if VA == PA == 0
  efi: libstub: Fix incorrect payload size in zboot header
  efi: libstub: Give efi_main() asmlinkage qualification
  efi: efivars: Fix variable writes without query_variable_store()
  efi: ssdt: Don't free memory if ACPI table was loaded successfully
  efi: libstub: Remove zboot signing from build options

Pull iommu fixes from Joerg Roedel:
 "Intel VT-d fixes:

   - Fix a lockdep splat issue in intel_iommu_init()

   - Allow NVS regions to pass RMRR check

   - Domain cleanup in error path"

* tag 'iommu-fixes-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Clean up si_domain in the init_dmars() error path
  iommu/vt-d: Allow NVS regions in arch_rmrr_sanity_check()
  iommu/vt-d: Use rcu_lock in get_resv_regions
  iommu: Add gfp parameter to iommu_alloc_resv_region

Pull HID fixes from Benjamin Tissoires:

 - a 12 year old bug fix for the Apple Magic Trackpad v1 (José Expósito)

 - a fix for a potential crash on removal of the Playstation controllers
   (Roderick Colenbrander)

 - a few new device IDs and device-specific quirks, most notably support
   of the new Playstation DualSense Edge controller

* tag 'for-linus-2022102101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: lenovo: Make array tp10ubkbd_led static const
  HID: saitek: add madcatz variant of MMO7 mouse device ID
  HID: playstation: support updated DualSense rumble mode.
  HID: playstation: add initial DualSense Edge controller support
  HID: playstation: stop DualSense output work on remove.
  HID: magicmouse: Do not set BTN_MOUSE on double report

Pull cifs fixes from Steve French:

 - memory leak fixes

 - fixes for directory leases, including an important one which fixes a
   problem noticed by git functional tests

 - fixes relating to missing free_xid calls (helpful for
   tracing/debugging of entry/exit into cifs.ko)

 - a multichannel fix

 - a small cleanup fix (use of list_move instead of list_del/list_add)

* tag '6.1-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: fix memory leaks in session setup
  cifs: drop the lease for cached directories on rmdir or rename
  smb3: interface count displayed incorrectly
  cifs: Fix memory leak when build ntlmssp negotiate blob failed
  cifs: set rc to -ENOENT if we can not get a dentry for the cached dir
  cifs: use LIST_HEAD() and list_move() to simplify code
  cifs: Fix xid leak in cifs_get_file_info_unix()
  cifs: Fix xid leak in cifs_ses_add_channel()
  cifs: Fix xid leak in cifs_flock()
  cifs: Fix xid leak in cifs_copy_file_range()
  cifs: Fix xid leak in cifs_create()

Pull nfsd fixes from Chuck Lever:
 "Fixes for patches merged in v6.1"

* tag 'nfsd-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: ensure we always call fh_verify_error tracepoint
  NFSD: unregister shrinker when nfsd_init_net() fails

When an extended state component is not present in fpstate, but in init
state, the function copies from init_fpstate via copy_feature().

But, dynamic states are not present in init_fpstate because of all-zeros
init states. Then retrieving them from init_fpstate will explode like this:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 ...
 RIP: 0010:memcpy_erms+0x6/0x10
  ? __copy_xstate_to_uabi_buf+0x381/0x870
  fpu_copy_guest_fpstate_to_uabi+0x28/0x80
  kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm]
  ? __this_cpu_preempt_check+0x13/0x20
  ? vmx_vcpu_put+0x2e/0x260 [kvm_intel]
  kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
  ? kvm_vcpu_ioctl+0xea/0x6b0 [kvm]
  ? __fget_light+0xd4/0x130
  __x64_sys_ioctl+0xe3/0x910
  ? debug_smp_processor_id+0x17/0x20
  ? fpregs_assert_state_consistent+0x27/0x50
  do_syscall_64+0x3f/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Adjust the 'mask' to zero out the userspace buffer for the features that
are not available both from fpstate and from init_fpstate.

The dynamic features depend on the compacted XSAVE format. Ensure it is
enabled before reading XCOMP_BV in init_fpstate.

Fixes: 2308ee57 ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Reported-by: Yuan Yao <yuan.yao@intel.com>
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/lkml/BYAPR11MB3717EDEF2351C958F2C86EED95259@BYAPR11MB3717.namprd11.prod.outlook.com/
Link: https://lkml.kernel.org/r/20221021185844.13472-1-chang.seok.bae@intel.com

Pull SCSI fixes from James Bottomley:
 "Two small changes, one in the lpfc driver and the other in the core.

  The core change is an additional footgun guard which prevents users
  from writing the wrong state to sysfs and causing a hang"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix memory leak in lpfc_create_port()
  scsi: core: Restrict legal sdev_state transitions via sysfs