Add DT bindings for atmel TDES.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add DT bindings for atmel SHA.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add DT bindings for atmel AES.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS).  This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.

Covering each of these points in detail:

1. Feature is not being used

Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them.  I'm
unable to find any evidence that any such programs exist.  For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1

The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device."  This doesn't
appear to have happened.

It's not clear that there is real demand for crypto statistics.  Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.

Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).

Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported.  For example,
before Linux v6.7 hash stats were double-counted in most cases.

There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.

2. CONFIG_CRYPTO_STATS significantly reduces performance

Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics.  This
primarily affects systems with large number of CPUs.  For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.

It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters.  But no one has done this in 5+ years.  This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.

It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter.  But Linux distros tend to error on the side
of enabling options.  The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above).  So, even
just having the option available is harmful to users.

3. CONFIG_CRYPTO_STATS is a large maintenance burden

There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files.  It significantly complicates much of the
implementation of the crypto API.  After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working".  We should be spending this effort elsewhere.

Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function dh_is_pubkey_valid was added to for FIPS but it was
only partially conditional to fips_enabled.

In particular, the first test in the function relies on the last
test to work properly, but the last test is only run in FIPS mode.

Fix this inconsistency by making the whole function conditional
on fips_enabled.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

crypto_engine_alloc_init may fail, e.g., as result of a fail of
devm_kzalloc or kthread_create_worker. Other drivers (e.g.,
amlogic-gxl-core.c, aspeed-acry.c, aspeed-hace.c, jr.c, etc.) check
crypto_engine_alloc_init's return value and return -ENOMEM in case
a NULL pointer is returned. This patch inserts a corresponding
return value check to rk3288_crypto.c.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Correct various small problems in the help text:
a. change 2 spaces to ", "
b. finish an incomplete sentence
c. change non-working URL to working URL

Fixes: a9a98d49 ("crypto: Kconfig - simplify compression/RNG entries")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218458Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Christoph Biedl <bugzilla.kernel.bpeb@manchmal.in-ulm.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function get_ring_to_svc_map() is present in both 420xx and
4xxx drivers. Rework the logic to make it generic to GEN4 devices
and move it to qat_common/adf_gen4_hw_data.c.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If a device is configured for data compression chaining (dcc), half of the
engines are loaded with the symmetric crypto image and the rest are loaded
with the compression image.
However, in such configuration all rings can handle compression requests.

Fix the ring to service mapping so that when a device is configured for
dcc, the ring to service mapping reports that all rings in a bank can
be used for compression.

Fixes: fcf60f4b ("crypto: qat - add support for 420xx devices")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If a device is configured for data compression chaining (dcc), half of the
engines are loaded with the symmetric crypto image and the rest are loaded
with the compression image.
However, in such configuration all rings can handle compression requests.

Fix the ring to service mapping so that when a device is configured for
dcc, the ring to service mapping reports that all rings in a bank can
be used for compression.

Fixes: a238487f ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move comment description to the same line as the function name.

This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
    drivers/crypto/intel/qat/qat_common/qat_crypto.c:108: warning: missing initial short description on line:
     * qat_crypto_vf_dev_config()
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove extra description from comments as it is not required.

This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
    drivers/crypto/intel/qat/qat_common/adf_dev_mgr.c:65: warning: contents before sections
    drivers/crypto/intel/qat/qat_common/adf_isr.c:380: warning: contents before sections
    drivers/crypto/intel/qat/qat_common/adf_vf_isr.c:298: warning: contents before sections
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove double initialization of the reg variable.

This is to fix the following warning when compiling the QAT driver
using clang scan-build:
    drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1010:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
     1010 |         u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SSMCPPERR);
          |             ^~~   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    drivers/crypto/intel/qat/qat_common/adf_gen4_ras.c:1109:6: warning: Value stored to 'reg' during its initialization is never read [deadcode.DeadStores]
     1109 |         u32 reg = ADF_CSR_RD(csr, ADF_GEN4_SER_ERR_SSMSH);
          |             ^~~   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 99b1c982 ("crypto: qat - count QAT GEN4 errors")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Check if delta_us is not zero and return -EINVAL if it is.
delta_us is unlikely to be zero as there is a sleep between the reads of
the two timestamps.

This is to fix the following warning when compiling the QAT driver
using clang scan-build:
    drivers/crypto/intel/qat/qat_common/adf_clock.c:87:9: warning: Division by zero [core.DivideZero]
       87 |         temp = DIV_ROUND_CLOSEST_ULL(temp, delta_us);
          |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: e2980ba5 ("crypto: qat - add measure clock frequency")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This macro was added but never used, remove it.

This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
    drivers/crypto/intel/qat/qat_common/adf_cnv_dbgfs.c:19:9: warning: macro is not used [-Wunused-macros]
       19 | #define CNV_SLICE_ERR_MASK              GENMASK(7, 0)
          |         ^

Fixes: d807f024 ("crypto: qat - add cnv_errors debugfs file")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As a result of the removal of qat_zlib_deflate, some defines where not
removed. Remove them.

This is to fix the following warning when compiling the QAT driver
using the clang compiler with CC=clang W=2:
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:21:9: warning: macro is not used [-Wunused-macros]
       21 | #define QAT_RFC_1950_CM_OFFSET 4
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:16:9: warning: macro is not used [-Wunused-macros]
       16 | #define QAT_RFC_1950_HDR_SIZE 2
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:17:9: warning: macro is not used [-Wunused-macros]
       17 | #define QAT_RFC_1950_FOOTER_SIZE 4
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:22:9: warning: macro is not used [-Wunused-macros]
       22 | #define QAT_RFC_1950_DICT_MASK 0x20
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:18:9: warning: macro is not used [-Wunused-macros]
       18 | #define QAT_RFC_1950_CM_DEFLATE 8
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:20:9: warning: macro is not used [-Wunused-macros]
       20 | #define QAT_RFC_1950_CM_MASK 0x0f
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:23:9: warning: macro is not used [-Wunused-macros]
       23 | #define QAT_RFC_1950_COMP_HDR 0x785e
          |         ^
    drivers/crypto/intel/qat/qat_common/qat_comp_algs.c:19:9: warning: macro is not used [-Wunused-macros]
       19 | #define QAT_RFC_1950_CM_DEFLATE_CINFO_32K 7
          |         ^

Fixes: e9dd20e0 ("crypto: qat - Remove zlib-deflate")
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are a few issues in this code.  If *ppos is non-zero then the
first part of the buffer is not initialized.  We never initialize the
last character of the buffer.  The return is not checked so it's
possible that none of the buffer is initialized.

This is debugfs code which is root only and the impact of these bugs is
very small.  However, it's still worth fixing.  To fix this:
1) Check that *ppos is zero.
2) Use copy_from_user() instead of simple_write_to_buffer().
3) Explicitly add a NUL terminator.

Fixes: e2b67859 ("crypto: qat - add heartbeat error simulator")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Until authenticated the platform enforces a state machine. Adjust
unit tests with this in mind.

Correct the return codes for all the states the unit tests ends up
hitting:

* Set Param / Get Param: DBC_ERROR_BAD_STATE
* Set UID: DBC_ERROR_SIGNATURE_INVALID
* Authencitated Nonce: DBC_ERROR_BAD_PARAMETERS
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Errors can potentially occur in the "processing" of PSP commands or
commands can be processed successfully but still return an error code in
the header.

This second case was being discarded because PSP communication worked but
the command returned an error code in the payload header.

Capture both cases and return them to the caller as -EIO for the caller
to investigate. The caller can detect the latter by looking at
`req->header->status`.
Reported-and-tested-by: Tim Van Patten <timvp@google.com>
Fixes: 7ccc4f4e ("crypto: ccp - Add support for an interface for platform features")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clang-16 warns about casting between incompatible function types:

arch/arm/crypto/sha256_glue.c:37:5: error: cast from 'void (*)(u32 *, const void *, unsigned int)' (aka 'void (*)(unsigned int *, const void *, unsigned int)') to 'sha256_block_fn *' (aka 'void (*)(struct sha256_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   37 |                                 (sha256_block_fn *)sha256_block_data_order);
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/sha512-glue.c:34:3: error: cast from 'void (*)(u64 *, const u8 *, int)' (aka 'void (*)(unsigned long long *, const unsigned char *, int)') to 'sha512_block_fn *' (aka 'void (*)(struct sha512_state *, const unsigned char *, int)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
   34 |                 (sha512_block_fn *)sha512_block_data_order);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix the prototypes for the assembler functions to match the typedef.
The code already relies on the digest being the first part of the
state structure, so there is no change in behavior.

Fixes: c80ae7ca ("crypto: arm/sha512 - accelerated SHA-512 using ARM generic ASM and NEON")
Fixes: b59e2ae3 ("crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unneeded colon in the auto_reset section.

This resolves the following errors when building the documentation:

    Documentation/ABI/testing/sysfs-driver-qat:146: ERROR: Unexpected indentation.
    Documentation/ABI/testing/sysfs-driver-qat:146: WARNING: Block quote ends without a blank line; unexpected unindent.

Fixes: f5419a42 ("crypto: qat - add auto reset on error")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-kernel/20240212144830.70495d07@canb.auug.org.au/T/Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

During the PCI AER system's error recovery process, the kernel driver
may encounter a race condition with freeing the reset_data structure's
memory. If the device restart will take more than 10 seconds the function
scheduling that restart will exit due to a timeout, and the reset_data
structure will be freed. However, this data structure is used for
completion notification after the restart is completed, which leads
to a UAF bug.

This results in a KFENCE bug notice.

  BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat]
  Use-after-free read at 0x00000000bc56fddf (in kfence-#142):
  adf_device_reset_worker+0x38/0xa0 [intel_qat]
  process_one_work+0x173/0x340

To resolve this race condition, the memory associated to the container
of the work_struct is freed on the worker if the timeout expired,
otherwise on the function that schedules the worker.
The timeout detection can be done by checking if the caller is
still waiting for completion or not by using completion_done() function.

Fixes: d8cba25d ("crypto: qat - Intel(R) QAT driver framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The implementation of the Rate Limiting (RL) feature includes the cleanup
of all SLAs during device shutdown. For each SLA, the firmware is notified
of the removal through an admin message, the data structures that take
into account the budgets are updated and the memory is freed.
However, this explicit cleanup is not necessary as (1) the device is
reset, and the firmware state is lost and (2) all RL data structures
are freed anyway.

In addition, if the device is unresponsive, for example after a PCI
AER error is detected, the admin interface might not be available.
This might slow down the shutdown sequence and cause a timeout in
the recovery flows which in turn makes the driver believe that the
device is not recoverable.

Fix by replacing the explicit SLAs removal with just a free of the
SLA data structures.

Fixes: d9fb8408 ("crypto: qat - add rate limiting feature to qat_4xxx")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit 10930333 ("crypto: vmx - Move to arch/powerpc/crypto") moves the
crypto vmx files to arch/powerpc, but misses to adjust the file entries for
IBM Power VMX Cryptographic instructions and LINUX FOR POWERPC.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.

Adjust these file entries accordingly. To keep the matched files exact
after the movement, spell out each file name in the new directory.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The function qm_stop_qp_nolock() always return zero, so
function type is changed to void.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The debugfs files 'dev_state' and 'dev_timeout' are added.
Users can query the current queue stop status through these two
files. And set the waiting timeout when the queue is released.

dev_state: if dev_timeout is set, dev_state indicates the status
of stopping the queue. 0 indicates that the queue is stopped
successfully. Other values indicate that the queue stops fail.
If dev_timeout is not set, the value of dev_state is 0;

dev_timeout: if the queue fails to stop, the queue is released
after waiting dev_timeout * 20ms.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Hardware V3 could be able to drain function by sending mailbox
to hardware which will trigger tasks in device to be flushed out.
When the function is reset, the function can be stopped by this way.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the case when only TSME is enabled, it is useful to state that fact
too, so that users are aware that memory encryption is still enabled
even when the corresponding software variant of memory encryption is not
enabled.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

SP 800-56Br2, Section 7.1.1 [1] specifies that:
1. If m does not satisfy 1 < m < (n – 1), output an indication that m is
out of range, and exit without further processing.

Similarly, Section 7.1.2 of the same standard specifies that:
1. If the ciphertext c does not satisfy 1 < c < (n – 1), output an
indication that the ciphertext is out of range, and exit without further
processing.

This range is slightly more conservative than RFC3447, as it also
excludes RSA fixed points 0, 1, and n - 1.

[1] https://doi.org/10.6028/NIST.SP.800-56Br2Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rework the AER reset and recovery flow to take into account root port
integrated devices that gets reset between the error detected and the
slot reset callbacks.

In adf_error_detected() the devices is gracefully shut down. The worker
threads are disabled, the error conditions are notified to listeners and
through PFVF comms and finally the device is reset as part of
adf_dev_down().

In adf_slot_reset(), the device is brought up again. If SRIOV VFs were
enabled before reset, these are re-enabled and VFs are notified of
restarting through PFVF comms.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the driver detects an heartbeat failure, it starts the recovery
flow. Set a limit so that the number of events is limited in case the
heartbeat status is read too frequently.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Expose the `auto_reset` sysfs attribute to configure the driver to reset
the device when a fatal error is detected.

When auto reset is enabled, the driver resets the device when it detects
either an heartbeat failure or a fatal error through an interrupt.

This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Notify a fatal error condition and optionally reset the device in
the following cases:
  * if the device reports an uncorrectable fatal error through an
    interrupt
  * if the heartbeat feature detects that the device is not
    responding

This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When a Physical Function (PF) is reset, SR-IOV gets disabled, making the
associated Virtual Functions (VFs) unavailable. Even after reset and
using pci_restore_state, VFs remain uncreated because the numvfs still
at 0. Therefore, it's necessary to reconfigure SR-IOV to re-enable VFs.

This commit introduces the ADF_SRIOV_ENABLED configuration flag to cache
the SR-IOV enablement state. SR-IOV is only re-enabled if it was
previously configured.

This commit also introduces a dedicated workqueue without
`WQ_MEM_RECLAIM` flag for enabling SR-IOV during Heartbeat and CPM error
resets, preventing workqueue flushing warning.

This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update the PFVF logic to handle restart and recovery. This adds the
following functions:

  * adf_pf2vf_notify_fatal_error(): allows the PF to notify VFs that the
    device detected a fatal error and requires a reset. This sends to
    VF the event `ADF_PF2VF_MSGTYPE_FATAL_ERROR`.
  * adf_pf2vf_wait_for_restarting_complete(): allows the PF to wait for
    `ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE` events from active VFs
    before proceeding with a reset.
  * adf_pf2vf_notify_restarted(): enables the PF to notify VFs with
    an `ADF_PF2VF_MSGTYPE_RESTARTED` event after recovery, indicating that
    the device is back to normal. This prompts VF drivers switch back to
    use the accelerator for workload processing.

These changes improve the communication and synchronization between PF
and VF drivers during system restart and recovery processes.
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Disable arbitration to avoid new requests to be processed before
resetting a device.

This is needed so that new requests are not fetched when an error is
detected.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add error notify method to report a fatal error event to all the
subsystems registered. In addition expose an API,
adf_notify_fatal_error(), that allows to trigger a fatal error
notification asynchronously in the context of a workqueue.

This will be invoked when a fatal error is detected by the ISR or
through Heartbeat.
Signed-off-by: Furong Zhou <furong.zhou@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a mechanism that allows to inject a heartbeat error for testing
purposes.
A new attribute `inject_error` is added to debugfs for each QAT device.
Upon a write on this attribute, the driver will inject an error on the
device which can then be detected by the heartbeat feature.
Errors are breaking the device functionality thus they require a
device reset in order to be recovered.

This functionality is not compiled by default, to enable it
CRYPTO_DEV_QAT_ERROR_INJECTION must be set.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com>
Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

virtqueue_enable_cb() will call virtqueue_poll() which will check if
queue is broken at beginning, so remove the virtqueue_is_broken() call
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard #323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d4 ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>