- 17 May, 2021 40 commits
-
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 7247645f ("iio: hmc5843: Move hmc5843 out of staging") Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210501170121.512209-16-jic23@kernel.org
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 37b1ba2c ("iio: proximity: as3935: fix buffer stack trashing") Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: cb119d53 ("iio: proximity: add support for PulsedLight LIDAR") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 78f83902 ("iio: distance: srf08: add IIO driver for us ranger") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 0d96d5ea ("iio: humidity: Add triggered buffer support for AM2315") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 13426454 ("iio: bmg160: Separate i2c and core driver") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of uses of iio_push_to_buffers_with_timestamp() Fixes: 0010d6b4 ("iio: adc: vf610: Add IIO buffer support for Vybrid ADC") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: ecc24e72 ("iio: adc: Add TI ADS1015 ADC driver support") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: db6a19b8 ("iio: accel: Add trigger support for STK8BA50") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: 95c12bba ("iio: accel: Add buffer mode for Sensortek STK8312") Signed-off-by:
-
Jonathan Cameron authored
The bulk read size is based on the size of an array that also has space for the timestamp alongside the channels. Fix that and also fix alignment of the buffer passed to iio_push_to_buffers_with_timestamp. Found during an audit of all calls to this function. Fixes: 1ce0eda0 ("iio: mxc4005: add triggered buffer mode for mxc4005") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: 1a4fbf6a ("iio: accel: kxcjk1013 3-axis accelerometer driver") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Note this matches what was done in all the other hid sensor drivers. This one was missed previously due to an extra level of indirection. Found during an audit of all calls of this function. Fixes: a96cd0f9 ("iio: accel: hid-sensor-accel-3d: Add timestamp") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: 194dc4c7 ("iio: accel: Add triggered buffer support for BMA220") Signed-off-by:
-
Jonathan Cameron authored
To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: b9a6a237 ("iio:bma180: Drop _update_scan_mode()") Signed-off-by:
-
Jonathan Cameron authored
Remove() callback calls pm_runtime_put_noidle() but there it is not balancing a get. No actual affect because the runtime pm core prevents the reference count going negative. Whilst here use pm_runtime_resume_and_get() rather than open coded version. Again, coccinelle script missed this one due to more complex code structure. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/20210509113354.660190-6-jic23@kernel.org
-
Jonathan Cameron authored
Calls to pm_runtime_put_noidle in probe() error path and remove() are not match to any get() calls. The runtime pm core protects against negative reference counts, so this doesn't have any visible impact beyond confusing the reader. Whilst here use pm_runtime_resume_and_get() to replace boilerplate. Signed-off-by:
-
Jonathan Cameron authored
probe() error paths after runtime pm is enabled, should disable it. remove() should not call pm_runtime_put_noidle() as there is no matching get() to have raised the reference count. This case has no affect a the runtime pm core protects against going negative. Whilst here use pm_runtime_resume_and_get() to tidy things up a little. coccicheck script didn't get this one due to complex code structure so found by inspection. Signed-off-by:
-
Jonathan Cameron authored
The call to pm_runtime_put_noidle() in remove() is not balanced by a get so drop it. Using pm_runtime_resume_and_get() allows for simple introduction of error handling to allow for runtime resume failing. Signed-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Previously this driver used pm_runtime_sync_get() and did not handle any errors that occurred. Moving to the new pm_runtime_resume_and_get() + handle errors. Signed-off-by:
-
Jonathan Cameron authored
1 instance found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ The other instance changed did not check for failure of the pm_runtime_get_sync() so that is added. Note the remaining pm_runtime_get_sync() call is left alone because it is not obvious what to do on failure to power up in remove() This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Converts from using pm_runtime_get_sync() with no error handling over to pm_runtime_resume_and_get() which will ensure we don't end up holding a reference. Ensure this error return is then handled at calls to mlx90614_power_get(). These are all direct returns. Signed-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/ This is a prequel to taking a closer look at the runtime pm in IIO drivers in general. Signed-off-by:
-
Jonathan Cameron authored
No point in calling pm_runtime_put_noidle() that isn't balancing a get. Note no actual impact because the runtime pm core protects against a negative reference counter. For the pm_runtime_resume_and_get() main interest is in clearing out this old pattern to avoid it getting coppied into new submissions. Signed-off-by:
-
Jonathan Cameron authored
This driver alls pm_runtime_put_noidle() in it's remove function, but there is no matching get call. This isn't a bug as runtime pm will not allow the reference counter to go negative, but it is missleading so lets remove it. Whilst here use pm_runtime_resume_and_get() to tidy up some boilerplate. The coccicheck script didn't get this one due to the less obvious structure. Found by inspection. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Jonathan Cameron authored
Both these drivers call pm_runtime_put_no_idle() when the reference count should already be zero as there is no matching get() Whilst here use pm_runtime_resume_and_get() rather than open coding. Signed-off-by:
-
Jonathan Cameron authored
A call to pm_runtime_put_noidle() doesn't match any call that would result in a get(). It is safe because runtime pm core protects against the reference counter going 0, but it makes it harder to understand the code. Whilst here use pm_runtime_resume_and_get() to tidy things up. The Coccinelle script didn't get this one due to more complex code structure. Signed-off-by:
-
Jonathan Cameron authored
Error paths in read_raw() and write_raw() callbacks failed to perform and type of runtime pm put(). Remove called pm_runtime_put_noidle() but there is no equivalent get (this is safe because the reference count is protected against going below zero, but it is misleading. Whilst here use pm_runtime_resume_and_get() to replace boilerplate. Signed-off-by:
Brian Masney <masneyb@onstation.org> Reviewed-by:
-
Jonathan Cameron authored
In remove this driver called pm_runtime_put_noidle() but there is no matching get operation. This does not cause any problems because the reference counter will not change if already zero, but it does make the code harder to reason about so should be dropped. Whilst we are here, use pm_runtime_resume_and_get() to replace open coded version. Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/Signed-off-by:
-
Jonathan Cameron authored
In both the probe() error path and remove() pm_runtime_put_noidle() is called which will decrement the runtime pm reference count. However, there is no matching function to have raised the reference count. Not this isn't a fix as the runtime pm core will stop the reference count going negative anyway. An alternative would have been to raise the count in these paths, but it is not clear why that would be necessary. Whilst we are here replace some boilerplate with pm_runtime_resume_and_get() Found using coccicheck script under review at: https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@inria.fr/Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by:
-
Stephan Gerhold authored
The KX023-1025 accelerometer [1] seems to be some mixture of KXCJK and KXTF9. It has the motion interrupt functionality from KXCJK but also the tap detection from KXTF9, and a lot more functionality. The configuration register map seems fairly different at first, but actually all register bits used by the kxcjk-1013 driver are available at the same bit positions on KX023-1025. It's just quite misleading because: 1. The registers have entirely different names and are at different addresses, but the bits are mostly named the same (and mean the same). 2. There are many more registers and bits used that are reserved on KXCJK to enable additional functionality. Ignoring all additionally available functionality for now, the KX023 works just fine after setting up the struct with the correct register addresses. The only difference that needs to be handled additionally is that the KX023 supports two configurable interrupt lines (INT1/2). For now only INT1 is supported so we route all interrupts used by the driver there. [1]: https://kionixfs.azureedge.net/en/datasheet/KX023-1025%20Specifications%20Rev%2012.0.pdf Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by:Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Stephan Gerhold authored
Most Kionix accelerometers seem to use fairly consistent register bits, but the register addresses are not necessarily the same. This is already partially the case for the KXTF9 (added in commit 1540d010 ("iio: accel: kxcjk1013: add support for KXTF9")), which has some registers at different addresses. However, it's even much worse for the KX023-1025. All register bits used by the kxcjk-1013 driver seem to be fully compatible with KX023, but it has most registers at totally different addresses. In preparation to add support for KX023-1025, move the fixed register addresses into a struct so we can change them for KX023 more easily. Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by:
-
Stephan Gerhold authored
The KX023-1025 accelerometer uses similar register bits as kxcjk1023, so it can make use of the same driver. Document the new kionix,kx023-1025 compatible that is also supported by the kxcjk-1013 driver now. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chunyan Zhang authored
MODULE_DEVICE_TABLE is used to extract the device information out of the driver and builds a table when being compiled. If using this macro, kernel can find the driver if available when the device is plugged in, and then loads that driver and initializes the device. Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The current-sense-shunt is an IIO provider thus can be referenced by IIO consumers (via "io-channels" property in consumer device node). Such provider is required to describe number of cells used in phandle lookup with "io-channel-cells" property. This also fixes dtbs_check warnings like: arch/arm/boot/dts/s5pv210-fascinate4g.dt.yaml: current-sense-shunt: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: ce66e52b ("dt-bindings:iio:afe:current-sense-shunt: txt to yaml conversion.") Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by:
-
