- 12 Jun, 2021 6 commits
-
-
Sebastian Reichel authored
This adds device tree files for the General Electric Healthcare (GEHC) B1x5v2 series. All models make use of Congatec's QMX6 system on module, which is described in its own device tree include, so that it can also be used by other boards. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christoph Niedermaier authored
Add VIO regulator that supplies multiple ethernet magnetics and currently there is no upstream support for that in the networking, so just keep the regulator enabled always to emulate what other boards, which have this hard-wired, do. Until there is support. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christoph Niedermaier authored
Add aliases for i2c and serial to match the order of the DHCOM standard [1]. Also add aliases for the two rtcs. The i2c rtc is the primary one. [1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdfSigned-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christoph Niedermaier authored
The i2c bus can freeze at the end of transaction so the bus can no longer work. This scenario is improved by adding scl/sda gpios definitions to implement the i2c bus recovery mechanism. Fixes: 52c7a088 ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christoph Niedermaier authored
To make the ethernet cable plugin detection reliable the power detection of the smsc phy has been disabled. Fixes: 52c7a088 ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christoph Niedermaier authored
Fix ethernet reset time properties as described in Documentation/devicetree/bindings/net/ethernet-phy.yaml Fixes: 52c7a088 ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 08 Jun, 2021 9 commits
-
-
Robin van der Gracht authored
The 'fsl,ssi' documentation doesn't say anything about specifying this. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Robin van der Gracht authored
According to Documentation/devicetree/bindings/sound/fsl,ssi.txt 'fsl,mode' should be specified for AC97 mode only. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
interrupt-counter is mainline now, so we can add missing counter nodes. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Robin van der Gracht authored
Enable Video Processing Unit to make accelerated video decoding work. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
Activate low-pass/debounce filter on the touchscreen. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
Remove touchscreen-size-* properties. This values are not correct, event if it works with ts_test tool, it fails to work properly with weston. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
At some point PWM cell count was changed, but it didn't triggered any error, since this DT was overwriting "#pwm-cells". To make sure, we are in sync with the kernel driver, remove this property and fix the pwm consumer. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
The backlight power is controlled through the reg_bl_12v0 regulator. Co-Developed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
Add touchscreen support to the Protonic VT7 board. Co-Developed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 23 May, 2021 8 commits
-
-
Geert Uytterhoeven authored
make dtbs_check: lan9220@f4000000: $nodename:0: 'lan9220@f4000000' does not match '^ethernet(@.*)?$' Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Geert Uytterhoeven authored
make dtbs_check: lan9221@5,0: $nodename:0: 'lan9221@5,0' does not match '^ethernet(@.*)?$' Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
Without SoC specific PHY fixups the network interface on this board will fail to work. Provide missing DT properties to make it work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Oleksij Rempel authored
Latest kernel is actually using phy-mode property, so set proper value to make fec interface work again. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Shengjiu Wang authored
Configure the gpio for hp detect for wm8962 sound card Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Shengjiu Wang authored
Add asrc support for wm8962 sound card. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Dillon Min authored
The DaSheng Com-9xx is and ARM based signle board computer (SBC) featuring: - i.MX6Q - 2GiB LPDDR3 DRAM - 8GiB eMMC 5.0 FLASH - 4MiB SPI Flash - USB 2.0 Host/Device - Multiple multi-protocol RS232/RS485 Serial ports - microSD socket - 5V DC power input - HDMI1.4a,1080p@60 - RGMIIx1 Gigabit Ethernet - CSI0x1, connect with ov2659 Signed-off-by: Dillon Min <dillon.minfei@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Michal Vokáč authored
Until commit fa2d0aa9 ("mmc: core: Allow setting slot index via device tree alias") was introduced, our usdhc3 and usdhc4 devices were enumerated as mmc0 and mmc1. The mmc1 device is used to boot/update the board and its name must be fixed. With the referenced commit, aliases from imx6qdl.dtsi took effect. Override the aliases to get back the original device indexes. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 22 May, 2021 3 commits
-
-
Shengjiu Wang authored
Add HDMI audio sound card, the interface is sii902x. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Shengjiu Wang authored
There is issue with simple sound card, the simple sound card can't configure the pll of codec. [ 115.352669] wm8960 1-001a: failed to configure clock [ 115.358843] wm8960 1-001a: ASoC: error at snd_soc_dai_hw_params on wm8960-hifi: -22 So Switch to fsl-asoc-card and the fsl-asoc-card can support asrc module as front-end component. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lukasz Majewski authored
This patch adds DTS definition of the imx278 based XEA board. Signed-off-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 13 May, 2021 2 commits
-
-
Michal Vokáč authored
The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display. The display consist of a 128x64 OLED panel and a SSD1305 controller. The OLED panel resolution is 128x64 but the built-in controller default resolution is 132x64. To display properly a segment offset needs to be configured. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Primoz Fiser authored
Serial interface uart3 on phyFLEX board is capable of 5-wire connection including signals RTS and CTS for hardware flow control. Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add missing property "uart-has-rtscts" to allow serial interface to be configured and used with the hardware flow control. Signed-off-by: Primoz Fiser <primoz.fiser@norik.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 11 May, 2021 2 commits
-
-
Uwe Kleine-König authored
The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as done for all the other pins with GPIO functionality. Fix for consistency. There are no mainline users that needs adaption. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
The MX6QDL_PAD_EIM_D22 pad is already handled in the common imx6qdl-wandboard.dtsi file. Remove it from the local hog group to avoid the following runtime error: [ 0.117763] imx6q-pinctrl 20e0000.pinctrl: pin MX6Q_PAD_EIM_D22 already requested by 20e0000.pinctrl; cannot claim for regulator-usbotgvbus [ 0.117785] imx6q-pinctrl 20e0000.pinctrl: pin-42 (regulator-usbotgvbus) status -22 [ 0.117802] imx6q-pinctrl 20e0000.pinctrl: could not request pin 42 (MX6Q_PAD_EIM_D22) from group usbotgvbusgrp on device 20e0000.pinctrl [ 0.117822] reg-fixed-voltage regulator-usbotgvbus: Error applying setting, reverse things back [ 0.117844] reg-fixed-voltage: probe of regulator-usbotgvbus failed with error -22 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 09 May, 2021 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Turns out the bio max size change still has issues, so let's get it reverted for 5.13-rc1. We'll shake out the issues there and defer it to 5.14 instead" * tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block: Revert "bio: limit bio max size"
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small SMB3 chmultichannel related changesets (also for stable) from the SMB3 test event this week. The other fixes are still in review/testing" * tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6: smb3: if max_channels set to more than one channel request multichannel smb3: do not attempt multichannel to server which does not support it smb3: when mounting with multichannel include it in requested capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of scheduler updates: - Prevent PSI state corruption when schedule() races with cgroup move. A recent commit combined two PSI callbacks to reduce the number of cgroup tree updates, but missed that schedule() can drop rq::lock for load balancing, which opens the race window for cgroup_move_task() which then observes half updated state. The fix is to solely use task::ps_flags instead of looking at the potentially mismatching scheduler state - Prevent an out-of-bounds access in uclamp caused bu a rounding division which can lead to an off-by-one error exceeding the buckets array size. - Prevent unfairness caused by missing load decay when a task is attached to a cfs runqueue. The old load of the task was attached to the runqueue and never removed. Fix it by enforcing the load update through the hierarchy for unthrottled run queue instances. - A documentation fix fot the 'sched_verbose' command line option" * tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unfairness caused by missing load decay sched: Fix out-of-bound access in uclamp psi: Fix psi state corruption when schedule() races with cgroup move sched,doc: sched_debug_verbose cmdline should be sched_verbose
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of locking related fixes and updates: - Two fixes for the futex syscall related to the timeout handling. FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and because it's not set the time namespace adjustment for clock MONOTONIC is applied wrongly. FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its always a relative timeout. - Cleanups in the futex syscall entry points which became obvious when the two timeout handling bugs were fixed. - Cleanup of queued_write_lock_slowpath() as suggested by Linus - Fixup of the smp_call_function_single_async() prototype" * tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Make syscall entry points less convoluted futex: Get rid of the val2 conditional dance futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op") locking/qrwlock: Cleanup queued_write_lock_slowpath() smp: Fix smp_call_function_single_async prototype
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Borislav Petkov: "Handle power-gating of AMD IOMMU perf counters properly when they are used" * tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A bunch of things accumulated for x86 in the last two weeks: - Fix guest vtime accounting so that ticks happening while the guest is running can also be accounted to it. Along with a consolidation to the guest-specific context tracking helpers. - Provide for the host NMI handler running after a VMX VMEXIT to be able to run on the kernel stack correctly. - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt relevant - real hw supports both) - A code generation improvement to TASK_SIZE_MAX through the use of alternatives - The usual misc and related cleanups and improvements" * tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: x86: Consolidate guest enter/exit logic to common helpers context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain context_tracking: Consolidate guest enter/exit wrappers sched/vtime: Move guest enter/exit vtime accounting to vtime.h sched/vtime: Move vtime accounting external declarations above inlines KVM: x86: Defer vtime accounting 'til after IRQ handling context_tracking: Move guest exit vtime accounting to separate helpers context_tracking: Move guest exit context tracking to separate helpers KVM/VMX: Invoke NMI non-IST entry instead of IST entry x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported x86/resctrl: Fix init const confusion x86: Delete UD0, UD1 traces x86/smpboot: Remove duplicate includes x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
-
Jens Axboe authored
This reverts commit cd2c7545. Alex reports that the commit causes corruption with LUKS on ext4. Revert it for now so that this can be investigated properly. Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-