- 29 May, 2020 10 commits
-
-
Evan Quan authored
Thermal control is performed by PMFW. What handled in driver is just whether or not to enable the alert(to driver). Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Evan Quan authored
Also the new logics for MP1 SW IRQs disablement/enablement are added. Signed-off-by:
-
Evan Quan authored
Added missing thermal IRQs disablement on suspend. Signed-off-by:
-
Evan Quan authored
User can check and set the enablement of throttling logging and the interval between each logging. V2: simplify the sysfs interface(no string parsing) V3: add proper lock protection on updating throttling_logging_rs.interval V4: documentation cosmetic per Luben's suggestion Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
Evan Quan authored
Currently this feature is supported on Arcturus only. PMFW will interrupt driver the first time when thermal throttling happened and every one second afterwards if the throttling continuing. On receiving the 1st interrupt, driver logs it the first time. However, if the throttling continues, the logging will be performed every minute to avoid log flooding. V2: simplify the implemention by ratelimited printk Signed-off-by:
-
Evan Quan authored
Enable this for Arcturus only for now. Signed-off-by:
-
Evan Quan authored
To fit the latest 54.24.0 PMFW. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Evan Quan authored
There will be no further interrupt without proper ack for current one. V2: fix typo to really set ACK bit only Signed-off-by:
-
Colin Ian King authored
Currently pointer pdd is being dereferenced when assigning pointer dpm and then pdd is being null checked. Fix this by checking if pdd is null before the dereference of pdd occurs. Addresses-Coverity: ("Dereference before null check") Fixes: 32cb59f3 ("drm/amdkfd: Track SDMA utilization per process") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Alex Deucher authored
Return an error for sysfs and debugfs power interfaces during gpu reset and suspend. Prevents access to the hw while it may be in an unusable state. v2: squash in fix to drop suspend check Acked-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
- 28 May, 2020 30 commits
-
-
Alex Deucher authored
Explicitly set the smallk size to 0 (4k). This is the hw default, but set it anyway just in case something else changed it. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Harry Wentland authored
This reverts commit 96cb7cf1. This change was used for DCN2 bringup and is no longer desired. In fact it breaks backlight on DCN2 systems. Cc: Alexander Monakov <amonakov@ispras.ru> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Michael Chiu <Michael.Chiu@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reported-and-tested-by:
Alexander Monakov <amonakov@ispras.ru> Signed-off-by:
-
Felix Kuehling authored
GCC 10 was complaining about how we append data to a buffer using snprintf: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c: In function ‘perf_show’: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:214:3: warning: ‘snprintf’ argument 4 overlaps destination object ‘buf’ [-Wrestrict] 214 | snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This patch fixes the warnings and makes the sysfs code more efficient by remembering the offset in the buffer between append operations. Signed-off-by:Aaron Liu <aaron.liu@amd.com> Tested-by:
Amber Lin <Amber.Lin@amd.com> Signed-off-by:
-
Gavin Wan authored
For SRIOV, since the CP_INT_CNTL_RING0 is programed on host side. The Guest should not program CP_INT_CNTL_RING0 again. Signed-off-by:
Gavin Wan <Gavin.Wan@amd.com> Reviewed-by:
Monk Liu <Monk.Liu@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
-
Alvin Lee authored
[Why] When determining synchronzied vblank we don't need to compare the stream with itself [How] If comparing same stream, continue to next iteration Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Anthony Koo authored
[Header Changes] - Combine all interface dependencies between driver and fw into a single header file - Add FW Versioning to the dmub_cmd.h file Signed-off-by:Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Hugo Hu authored
[why] We hit an issue which driver reallocate a pipe from desktop bottom pipe to video bottom pipe. In this case, driver need to re-enable plane. [how] Enable plane if container of plane status changed. Signed-off-by:
Hugo Hu <hugo.hu@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Anthony Koo authored
[Why] We want to better encapsulate all driver-fw dependencies into a single file. [How] Combine all the headers under inc folder into a single header Signed-off-by:
-
Eric Bernstein authored
[Why] Diagnostics DIO test with eDP not connected is required to run [How] Allow Diagnostics test with eDP not connected to skip link detection but still execute DIO test Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Paul Hsieh authored
[Why] Unit enter to S4, garbage show on screen when do OPTC blank. [How] Wait for vblank then do OPTC blank Signed-off-by:
Paul Hsieh <paul.hsieh@amd.com> Reviewed-by:
-
Aric Cyr authored
[Why] There are scenarios where no OPP is assigned to an OTG so its value is 0xF which is outside the size of the OPP array causing a potential driver crash. [How] Change the assert to an early return to guard against access. If there's no OPP assigned already, then OTG will be blank anyways so no functionality should be lost. Signed-off-by:
Zhan Liu <Zhan.Liu@amd.com> Acked-by:
-
Alvin Lee authored
[Why] HW team request to disable PG on NV12 (fixing missed cases) [How] Disable dpp and hubp PG Signed-off-by:
-
David Galiffi authored
[WHY] To facilitate DM removing the dependency between dc and the firmware binary. [HOW] Setting the default values to match VBIOS: 64 KB. These values are only used if meta is absent. Signed-off-by:
David Galiffi <David.Galiffi@amd.com> Reviewed-by:
-
Aric Cyr authored
[Why] Link loss currently only retrains and re-enables the stream. This can cause issues for some sinks. [How] When link loss occurs, the link and stream(s) should be completely disabled and then reenabled. Signed-off-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
Current implementation is slightly inaccurate and will often result in truncation/floor operation decrementing an exact integer output by 1. Only rounded down output is ever expected, just extract the fp exponent for this to increase performance and avoid any truncation issues. Signed-off-by:
-
Bhawanpreet Lakha authored
[Why] Previously we used link signal type to get the caps. We should use the sink signal type [How] Use sink signal type instead of link signal type Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by:
-
Paul Hsieh authored
[Why] The link_status is incorrect cause driver power off eDP when backlight on. Some eDP panels may show garbage on screen. [How] Correct link_status when power off encoder Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
-
Yong Zhao authored
Use words insteads of acronyms for better understanding. Signed-off-by:
Yong Zhao <Yong.Zhao@amd.com> Reviewed-by:
-
Mukul Joshi authored
Track SDMA usage on a per process basis and report it through sysfs. The value in the sysfs file indicates the amount of time SDMA has been in-use by this process since the creation of the process. This value is in microsecond granularity. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Wenhui Sheng authored
smu_i2c_eeprom_init may be invoked twice or more under sroiv mode, while we don't want to add check if (!amdgpu_sriov_vf) before we invoke smu_i2c_eeprom_init/fini each time, so we check if i2c adapter is already added before we invoke i2c_add_adapter Signed-off-by:
Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
Wenhui Sheng authored
We don't need SRIOV check after we enable SMC msg filter in SMU11 v2: squash in unused variable fix, unused ids Signed-off-by:
-
Wenhui Sheng authored
1. enable SMC message filter in SRIOV situation 2. return -EACCESS if msg is blocked from smu_msg_get_index 3. if msg is block, always return 0 from smu_v11_0_send_msg_with_param Signed-off-by:
-
Wenhui Sheng authored
1. add smu_11_0_msg_mapping definition 2. add valid info for each SMC message in SRIOV Signed-off-by:
-
Evan Quan authored
Since on early phase of bringup, the SMU IP may be not enabled or supported. Without this, we may hit null pointer dereference on accessing smu->adev. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Warnings in the kernel are generally treated as errors. The BREAK_TO_DEBUGGER macro is not a critical error or warning, but rather intended for developer use to help investigate behavior and sequences for other issues. We do still make use of DC_ERROR/ASSERT(0) in various places in the code for things that are genuine issues. Since most developers don't actually KGDB while debugging the kernel these essentially would have no value on their own since the KGDB breakpoint wouldn't trigger - ASSERT(0) was used as a shortcut to get a stacktrace. [How] Turn it into a DRM_DEBUG_DRIVER print instead. We unfortunately lose the stacktrace, but we still do retain some of the useful debug information this offers by having at least the function and line number loggable. If KGDB is supported in the kernel this will still trigger a real breakpoint as well. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. So, replace the one-element array with a flexible-array member. Also, make use of the new struct_size() helper to properly calculate the size of struct SISLANDS_SMC_SWSTATE. This issue was found with the help of Coccinelle and, audited and fixed _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of one-element arrays in the following form: struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. So, replace the one-element array with a flexible-array member. Also, make use of the new struct_size() helper to properly calculate the size of struct NISLANDS_SMC_SWSTATE. This issue was found with the help of Coccinelle and, audited and fixed _manually_. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Reviewed-by: -
Alex Deucher authored
SI and CIK came before VI and newer asics. Reviewed-by:
-
