- 15 Dec, 2023 1 commit
-
-
Jonathan Kim authored
Fix up on mes process context flush to prevent non-mes devices from spamming error messages or running into undefined behaviour during process termination. Fixes: bd33bb14 ("drm/amdkfd: fix mes set shader debugger process management") Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Eric Huang <jinhuieric.huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 14 Dec, 2023 20 commits
-
-
Melissa Wen authored
warning: expecting prototype for drm_crtc_additional_color_mgmt(). Prototype was for dm_crtc_additional_color_mgmt() instead Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312141801.o9eBCxt9-lkp@intel.com/Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Alex Deucher authored
It takes the plane state rather than the crtc state. Fixes: aba8b76b ("drm/amd/display: add plane shaper LUT support") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Zhipeng Lu authored
The amdgpu_free_extended_power_table is called in every error-handling paths of amdgpu_parse_extended_power_table. However, after the following call chain of returning: amdgpu_parse_extended_power_table |-> kv_dpm_init / si_dpm_init (the only two caller of amdgpu_parse_extended_power_table) |-> kv_dpm_sw_init / si_dpm_sw_init (the only caller of kv_dpm_init / si_dpm_init, accordingly) |-> kv_dpm_fini / si_dpm_fini (goto dpm_failed in xx_dpm_sw_init) |-> amdgpu_free_extended_power_table As above, the amdgpu_free_extended_power_table is called twice in this returning chain and thus a double-free is triggered. Similarily, the last kfree in amdgpu_parse_extended_power_table also cause a double free with amdgpu_free_extended_power_table in kv_dpm_fini. Fixes: 84176663 ("drm/amd/pm: create a new holder for those APIs used only by legacy ASICs(si/kv)") Signed-off-by:Zhipeng Lu <alexious@zju.edu.cn> Signed-off-by:
-
Zhipeng Lu authored
When radeon_bo_create and radeon_vm_clear_bo fail, the vm->page_tables allocated before need to be freed. However, neither radeon_vm_init itself nor its caller have done such deallocation. Fixes: 6d2f2944 ("drm/radeon: use normal BOs for the page tables v4") Signed-off-by:
-
Zhipeng Lu authored
When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug. Fixes: a2e73f56 ("drm/amdgpu: Add support for CIK parts") Signed-off-by: -
Zhipeng Lu authored
When the allocation of adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails, amdgpu_free_extended_power_table is called to free some fields of adev. However, when the control flow returns to si_dpm_sw_init, it goes to label dpm_failed and calls si_dpm_fini, which calls amdgpu_free_extended_power_table again and free those fields again. Thus a double-free is triggered. Fixes: 841686df ("drm/amdgpu: add SI DPM support (v4)") Signed-off-by:
-
Yang Li authored
./drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c:1418:2-3: Unneeded semicolon Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7743Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Alex Deucher authored
Should be -EOPNOTSUPP. Fixes: 5104fdf5 ("drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL") Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Joshua Ashton authored
Create drm_color_ctm_3x4 to support 3x4-dimension plane CTM matrix and convert DRM CTM to DC CSC float matrix. v3: - rename ctm2 to ctm_3x4 (Harry) Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Joshua Ashton <joshua@froggi.es> Signed-off-by:
-
Melissa Wen authored
Map the plane CTM driver-specific property to DC plane, instead of DC stream. The remaining steps to program DPP block are already implemented on DC shared-code. v3: - fix comment about plane and CRTC CTMs priorities (Harry) Reviewed-by:
-
Kenneth Feng authored
add power save mode workload for smu 13.0.10, so that in compute mode, pmfw will add margin since some applications requres higher margin. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
-
Peyton Lee authored
enable vpe dpm Signed-off-by:
Peyton Lee <peytolee@amd.com> Reviewed-by:
Lang Yu <lang.yu@amd.com> Signed-off-by:
-
Melissa Wen authored
Plane CTM for pre-blending color space conversion. Only enable driver-specific plane CTM property on drivers that support both pre- and post-blending gamut remap matrix, i.e., DCN3+ family. Otherwise it conflits with DRM CRTC CTM property. Reviewed-by:
-
Joshua Ashton authored
When commiting planes, we copy color mgmt resources to the stream state. Do the same for shaper and 3D LUTs. Reviewed-by:
-
Peyton Lee authored
pm supports return vpe clock table and soc clock table Signed-off-by:
Li Ma <li.ma@amd.com> Signed-off-by:
-
Wang, Beyond authored
Issue: during evict or validate happened on amdgpu_bo, the 'from' and 'to' is always same in ftrace event of amdgpu_bo_move where calling the 'trace_amdgpu_bo_move', the comment says move_notify is called before move happens, but actually it is called after move happens, here the new_mem is same as bo->resource Fix: move trace_amdgpu_bo_move from move_notify to amdgpu_bo_move Signed-off-by:
Wang, Beyond <Wang.Beyond@amd.com> Reviewed-by:
-
Joshua Ashton authored
Need to funnel the color caps through to these functions so it can check that the hardware is capable. v2: - remove redundant color caps assignment on plane degamma map (Harry) - pass color caps to degamma params v3: - remove unused color_caps parameter from set_color_properties (Harry) Reviewed-by:
-
Joshua Ashton authored
Map plane blend properties to DPP blend gamma. Plane blend is a post-3D LUT curve that linearizes color space for blending. It may be defined by a user-blob LUT and/or predefined transfer function. As hardcoded curve (ROM) is not supported on blend gamma, we use AMD color module to fill parameters when setting non-linear TF with empty LUT. v2: - rename DRM TFs to AMDGPU TFs Reviewed-by:
-
Joshua Ashton authored
Unlike degamma, blend gamma doesn't support hardcoded curve (predefined/ROM), but we can use AMD color module to fill blend gamma parameters when we have non-linear plane gamma TF without plane gamma LUT. The regular degamma path doesn't hit this. Reviewed-by:
-
Melissa Wen authored
Wire up DC 3D LUT to DM plane color management (pre-blending). On AMD display HW, 3D LUT comes after a shaper curve and we always have to program a shaper curve to delinearize or normalize the color space before applying a 3D LUT (since we have a reduced number of LUT entries). In this version, the default values of 3D LUT for size and bit_depth are 17x17x17 and 12-bit, but we already provide here a more generic mechanisms to program other supported values (9x9x9 size and 10-bit). v2: - started with plane 3D LUT instead of CRTC 3D LUT support v4: - lut3d_size is the max dimension size instead of # of entries Reviewed-by:
-
- 13 Dec, 2023 19 commits
-
-
Christian König authored
This can only happen when there is a reference counting bug. v2: fix typo Signed-off-by:
-
Woody Suwalski authored
Fix to avoid multiple debug error lines printed on every suspend by Radeon driver's debugfs. radeon_debugfs_init() calls debugfs_create_file() for every ring. This results in printing multiple error lines to the screen and dmesg similar to this: [ 92.378726] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present! [ 92.378732] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present! [ 92.378734] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present! [ 92.378737] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present! [ 92.378739] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present! [ 92.380775] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present! [ 92.406620] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present! [ 92.406624] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present! Patch v1: The fix was to run lookup() for the file before trying to (re)create that debug file. Patch v2: Call the radeon_debugfs_init() only once when radeon ring is initialized (as suggested by Christian K. - thanks) Reviewed-by:
Woody Suwalski <terraluna977@gmail.com> Signed-off-by:
-
Melissa Wen authored
Enable usage of predefined transfer func in addition to shaper 1D LUT. That means we can save some complexity by just setting a predefined curve, instead of programming a custom curve when preparing color space for applying 3D LUT. Reviewed-by:
-
Melissa Wen authored
Map DC shaper LUT to DM plane color management. Shaper LUT can be used to delinearize and/or normalize the color space for computational efficiency and achiving specific visual styles. If a plane degamma is apply to linearize the color space, a custom shaper 1D LUT can be used just before applying 3D LUT. v2: - use DPP color caps to verify plane 3D LUT support - add debug message if shaper LUT programming fails v4: - remove helper to check 3D LUT color caps (Harry) - update desc of lut3d-setup helper from MPC to DPP v5: - remove color_mgmt_changed check that prevents color updates (Joshua) Reviewed-by:
-
Joshua Ashton authored
With `dc_fixpt_from_s3132()` translation, we can just use it to set hdr_mult. Reviewed-by:
-
Joshua Ashton authored
Detach value translation from CTM to reuse it for programming HDR multiplier property. Reviewed-by:
-
Melissa Wen authored
DC only has pre-blending degamma caps (plane/DPP) that is currently in use for CRTC/post-blending degamma, so that we don't have HW caps to perform plane and CRTC degamma at the same time. Reject atomic updates when serspace sets both plane and CRTC degamma properties. Reviewed-by:
-
Joshua Ashton authored
Set DC plane with user degamma LUT or predefined TF from driver-specific plane color properties. If plane and CRTC degamma are set in the same time, plane degamma has priority. That means, we only set CRTC degamma if we don't have plane degamma LUT or TF to configure. We return -EINVAL if we don't have plane degamma settings, so we can continue and check CRTC degamma. Reviewed-by:
-
Christian König authored
When freeing PD/PT with shadows it can happen that the shadow destruction races with detaching the PD/PT from the VM causing a NULL pointer dereference in the invalidation code. Fix this by detaching the the PD/PT from the VM first and then freeing the shadow instead. Signed-off-by:
-
Melissa Wen authored
The next patch adds pre-blending degamma to AMD color mgmt pipeline, but pre-blending degamma caps (DPP) is currently in use to provide DRM CRTC atomic degamma or implict degamma on legacy gamma. Detach degamma usage regarging CRTC color properties to manage plane and CRTC color correction combinations. Reviewed-by:
-
Joshua Ashton authored
We should reset a plane state if at least one of the color management properties differs from old and new state. Reviewed-by:
-
Joshua Ashton authored
Otherwise this is just initialized to 0. This needs to actually have a value so that compute_curve can work for PQ EOTF. Reviewed-by:
-
Jani Nikula authored
Including drm_edid.h from amdgpu_mode.h causes the rebuild of literally hundreds of files when drm_edid.h is modified, while there are only a handful of files that actually need to include drm_edid.h. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Joshua Ashton authored
Add predefined transfer function programming. There is no post-blending out gamma ROM for hardcoded curves, but we can use AMD color modules to program LUT parameters from pre-defined coefficients and an empty regamma LUT (or bump up LUT parameters with pre-defined TF values). v2: - update crtc color mgmt if regamma TF differs between states (Joshua) - map inverse EOTF to DC transfer function (Melissa) v3: - update AMDGPU TF list v4: - update comment regarding regamma behavior Reviewed-by:
-
Melissa Wen authored
We will wire up MPC 3D LUT to DM CRTC color pipeline in the next patch, but so far, only for atomic interface. By checking set_output_transfer_func in DC drivers with MPC 3D LUT support, we can verify that regamma is only programmed when 3D LUT programming fails. As a groundwork to introduce 3D LUT programming and better understand each step, detach atomic regamma programming from the crtc colocr updating code. Reviewed-by:
-
Melissa Wen authored
Describe some expected behavior of the AMD DM color mgmt programming. Reviewed-by:
-
Melissa Wen authored
Add AMD pre-defined transfer function property to default DRM CRTC gamma to convert to wire encoding with or without a user gamma LUT. There is no post-blending regamma ROM for pre-defined TF. When setting Gamma TF (!= Identity) and LUT at the same time, the color module will combine the pre-defined TF and the custom LUT values into the LUT that's actually programmed. v2: - enable CRTC prop in the end of driver-specific prop sequence - define inverse EOTFs as supported regamma TFs - reword driver-specific function doc to remove shaper/3D LUT v3: - spell out TF+LUT behavior in the commit and comments (Harry) Reviewed-by:
-
Joshua Ashton authored
Blend 1D LUT or a pre-defined transfer function (TF) can be set to linearize content before blending, so that it's positioned just before blending planes in the AMD color mgmt pipeline, and after 3D LUT (non-linear space). Shaper and Blend LUTs are 1D LUTs that sandwich 3D LUT. Drivers should advertize blend properties according to HW caps. There is no blend ROM for pre-defined TF. When setting blend TF (!= Identity) and LUT at the same time, the color module will combine the pre-defined TF and the custom LUT values into the LUT that's actually programmed. v3: - spell out TF+LUT behavior in the commit and comments (Harry) v5: - get blend blob correctly Reviewed-by:
-
Melissa Wen authored
On AMD HW, 3D LUT always assumes a preceding shaper 1D LUT used for delinearizing and/or normalizing the color space before applying a 3D LUT. Add pre-defined transfer function to enable delinearizing content with or without shaper LUT, where AMD color module calculates the resulted shaper curve. We apply an inverse EOTF to go from linear values to encoded values. If we are already in a non-linear space and/or don't need to normalize values, we can bypass shaper LUT with a linear transfer function that is also the default TF value. There is no shaper ROM. When setting shaper TF (!= Identity) and LUT at the same time, the color module will combine the pre-defined TF and the custom LUT values into the LUT that's actually programmed. v2: - squash commits for shaper LUT and shaper TF - define inverse EOTF as supported shaper TFs v3: - spell out TF+LUT behavior in the commit and comments (Harry) - replace BT709 EOTF by inv OETF v5: - get shaper blob correctly (Joshua) Reviewed-by:
-
