The following warning was reported by lee bruce:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300
  fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
  Modules linked in:
  CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
  ......
  Call Trace:
  <TASK>
  fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334
  fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367
  call_read_iter include/linux/fs.h:2104 [inline]
  new_sync_read fs/read_write.c:395 [inline]
  vfs_read+0x85b/0xba0 fs/read_write.c:476
  ksys_read+0x12f/0x260 fs/read_write.c:619
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83
  entry_SYSCALL_64_after_hwframe+0x77/0x7f
  ......
  </TASK>

The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write()
syscall in the reproducer program and it happens as follows:

(1) calls fuse_dev_read() to read the INIT request
The read succeeds. During the read, bit FR_SENT will be set on the
request.
(2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify
The resend notify will resend all processing requests, so the INIT
request is moved from processing list to pending list again.
(3) calls fuse_dev_read() with an invalid output address
fuse_dev_read() will try to copy the same INIT request to the output
address, but it will fail due to the invalid address, so the INIT
request is ended and triggers the warning in fuse_request_end().

Fix it by clearing FR_SENT when re-adding requests into pending list.
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/linux-fsdevel/58f13e47-4765-fce4-daf4-dffcc5ae2330@huaweicloud.com/T/#m091614e5ea2af403b259e7cea6a49e51b9ee07a7
Fixes: 760eac73 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

When fuse_resend() moves the requests from processing lists to pending
list, it uses __set_bit() to set FR_PENDING bit in req->flags.

Using __set_bit() is not safe, because other functions may update
req->flags concurrently (e.g., request_wait_answer() may call
set_bit(FR_INTERRUPTED, &flags)).

Fix it by using set_bit() instead.

Fixes: 760eac73 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

This adds support for the FS_IOC_ENABLE_VERITY and FS_IOC_MEASURE_VERITY
ioctls. The FS_IOC_READ_VERITY_METADATA is missing but from the
documentation, "This is a fairly specialized use case, and most fs-verity
users won’t need this ioctl."
Signed-off-by: Richard Fung <richardfung@google.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Nobody checks the error flag on fuse folios, so stop setting it.
Optimise the (optional) setting of the uptodate flag and clearing
of the lock flag by using folio_end_read().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The internal tag string doesn't contain a newline. Append one when
emitting the tag via sysfs.

[Stefan] Orthogonal to the newline issue, sysfs_emit(buf, "%s", fs->tag) is
needed to prevent format string injection.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: a8f62f50 ("virtiofs: export filesystem tags through sysfs")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

To allow us extending the interface in the future.

Fixes: 44350256 ("fuse: implement ioctls to manage backing files")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Pull char / misc driver fixes from Greg KH:
 "Here are some small char/misc and other driver fixes for 6.9-rc5.
  Included in here are the following:

   - binder driver fix for reported problem

   - speakup crash fix

   - mei driver fixes for reported problems

   - comdei driver fix

   - interconnect driver fixes

   - rtsx driver fix

   - peci.h kernel doc fix

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  peci: linux/peci.h: fix Excess kernel-doc description warning
  binder: check offset alignment in binder_get_object()
  comedi: vmk80xx: fix incomplete endpoint checking
  mei: vsc: Unregister interrupt handler for system suspend
  Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
  misc: rtsx: Fix rts5264 driver status incorrect when card removed
  mei: me: disable RPL-S on SPS and IGN firmwares
  speakup: Avoid crash on very long word
  interconnect: Don't access req_list while it's being manipulated
  interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM

Pull kernfs bugfix and documentation update from Greg KH:
 "Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
  that do the following:

   - sysfs reference leak fix

   - embargoed-hardware-issues.rst update for Power

  Both of these have been in linux-next for over a week with no reported
  issues"

* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: embargoed-hardware-issues.rst: Add myself for Power
  fs: sysfs: Fix reference leak in sysfs_break_active_protection()

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.9-rc5 that
  resolve a bunch of reported problems. Included in here are:

   - MAINTAINERS and .mailmap update for Richard Genoud

   - serial core regression fixes from 6.9-rc1 changes

   - pci id cleanups

   - serial core crash fix

   - stm32 driver fixes

   - 8250 driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: stm32: Reset .throttled state in .startup()
  serial: stm32: Return IRQ_NONE in the ISR if no handling happend
  serial: core: Fix missing shutdown and startup for serial base port
  serial: core: Clearing the circular buffer before NULLifying it
  MAINTAINERS: mailmap: update Richard Genoud's email address
  serial/pmac_zilog: Remove flawed mitigation for rx irq flood
  serial: 8250_pci: Remove redundant PCI IDs
  serial: core: Fix regression when runtime PM is not enabled
  serial: mxs-auart: add spinlock around changing cts state
  serial: 8250_dw: Revert: Do not reclock if already at correct rate
  serial: 8250_lpc18xx: disable clks on error in probe()

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
  Included in here are:

   - MAINTAINER file update for invalid email address

   - usb-serial device id updates

   - typec driver fixes

   - thunderbolt / usb4 driver fixes

   - usb core shutdown fixes

   - cdc-wdm driver revert for reported problem in -rc1

   - usb gadget driver fixes

   - xhci driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  USB: serial: option: add Telit FN920C04 rmnet compositions
  usb: dwc3: ep0: Don't reset resource alloc flag
  Revert "usb: cdc-wdm: close race between read and workqueue"
  USB: serial: option: add Rolling RW101-GL and RW135-GL support
  USB: serial: option: add Lonsung U8300/U9300 product
  USB: serial: option: add support for Fibocom FM650/FG650
  USB: serial: option: support Quectel EM060K sub-models
  USB: serial: option: add Fibocom FM135-GL variants
  usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
  thunderbolt: Avoid notify PM core about runtime PM resume
  thunderbolt: Fix wake configurations after device unplug
  usb: dwc2: host: Fix dereference issue in DDMA completion flow.
  usb: typec: mux: it5205: Fix ChipID value typo
  MAINTAINERS: Drop Li Yang as their email address stopped working
  usb: gadget: fsl: Initialize udc before using it
  usb: Disable USB3 LPM at shutdown
  usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
  usb: typec: tcpm: Correct the PDO counting in pd_set
  usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
  usb: gadget: functionfs: Fix inverted DMA fence direction
  ...

Pull scheduler fix from Borislav Petkov:

 - Add a missing memory barrier in the concurrency ID mm switching

* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Add missing memory barrier in switch_mm_cid

Pull x86 fixes from Borislav Petkov:

 - Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ

 - Print the correct error code when FRED reports a bad event type

 - Add a FRED-specific INT80 handler without the special dances that
   need to happen in the current one

 - Enable the using-the-default-return-thunk-but-you-should-not warning
   only on configs which actually enable those special return thunks

 - Check the proper feature flags when selecting BHI retpoline
   mitigation

* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
  x86/fred: Fix incorrect error code printout in fred_bad_type()
  x86/fred: Fix INT80 emulation for FRED
  x86/retpolines: Enable the default thunk warning only on relevant configs
  x86/bugs: Fix BHI retpoline check

Pull block fixes from Jens Axboe:
 "Just two minor fixes that should go into the 6.9 kernel release, one
  fixing a regression with partition scanning errors, and one fixing a
  WARN_ON() that can get triggered if we race with a timer"

* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
  blk-iocost: do not WARN if iocg was already offlined
  block: propagate partition scanning errors to the BLKRRPART ioctl

Pull email address update from James Bottomley:
 "My IBM email has stopped working, so update to a working email
  address"

* tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: update to working email address

Pull kvm fixes from Paolo Bonzini:
 "This is a bit on the large side, mostly due to two changes:

   - Changes to disable some broken PMU virtualization (see below for
     details under "x86 PMU")

   - Clean up SVM's enter/exit assembly code so that it can be compiled
     without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
     return thunk in use. This should not happen!" when running KVM
     selftests.

  Everything else is small bugfixes and selftest changes:

   - Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
     where KVM would allow userspace to refresh the cache with a bogus
     GPA. The bug has existed for quite some time, but was exposed by a
     new sanity check added in 6.9 (to ensure a cache is either
     GPA-based or HVA-based).

   - Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
     got left behind during a 6.9 cleanup.

   - Fix a math goof in x86's hugepage logic for
     KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
     (detected by KASAN).

   - Fix a bug where KVM incorrectly clears root_role.direct when
     userspace sets guest CPUID.

   - Fix a dirty logging bug in the where KVM fails to write-protect
     SPTEs used by a nested guest, if KVM is using Page-Modification
     Logging and the nested hypervisor is NOT using EPT.

  x86 PMU:

   - Drop support for virtualizing adaptive PEBS, as KVM's
     implementation is architecturally broken without an obvious/easy
     path forward, and because exposing adaptive PEBS can leak host LBRs
     to the guest, i.e. can leak host kernel addresses to the guest.

   - Set the enable bits for general purpose counters in
     PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
     processors.

   - Disable LBR virtualization on CPUs that don't support LBR
     callstacks, as KVM unconditionally uses
     PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
     would fail on such CPUs.

  Tests:

   - Fix a flaw in the max_guest_memory selftest that results in it
     exhausting the supply of ucall structures when run with more than
     256 vCPUs.

   - Mark KVM_MEM_READONLY as supported for RISC-V in
     set_memory_region_test"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
  KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
  KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
  KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
  KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
  KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
  KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
  KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
  perf/x86/intel: Expose existence of callback support to KVM
  KVM: VMX: Snapshot LBR capabilities during module initialization
  KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
  KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
  KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
  KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
  KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
  KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
  KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
  KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
  KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
  KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
  KVM: SVM: Remove a useless zeroing of allocated memory
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix wireguard loading failure on pre-Power10 due to Power10 crypto
   routines

 - Fix papr-vpd selftest failure due to missing variable initialization

 - Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()

Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.

* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc/papr-vpd: Fix missing variable initialization
  powerpc/crypto/chacha-p10: Fix failure on non Power10
  powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()

Pull clk fixes from Stephen Boyd:
 "A couple clk driver fixes, a build fix, and a deadlock fix:

   - Mediatek mt7988 has broken PCIe because the wrong parent is used

   - Mediatek clk drivers may deadlock when registering their clks
     because the clk provider device is repeatedly runtime PM resumed
     and suspended during probe and clk registration.

     Resuming the clk provider device deadlocks with an ABBA deadlock
     due to genpd_lock and the clk prepare_lock. The fix is to keep the
     device runtime resumed while registering clks.

   - Another runtime PM related deadlock, this time with disabling
     unused clks during late init.

     We get an ABBA deadlock where a device is runtime PM resuming (or
     suspending) while the disabling of unused clks is happening in
     parallel. That runtime PM action calls into the clk framework and
     tries to grab the clk prepare_lock while the disabling of unused
     clks holds the prepare_lock and is waiting for that runtime PM
     action to complete.

     The fix is to runtime resume all the clk provider devices before
     grabbing the clk prepare_lock during disable unused.

   - A build fix to provide an empty devm_clk_rate_exclusive_get()
     function when CONFIG_COMMON_CLK=n"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
  clk: mediatek: Do a runtime PM get on controllers during probe
  clk: Get runtime PM before walking tree for clk_summary
  clk: Get runtime PM before walking tree during disable_unused
  clk: Initialize struct clk_core kref earlier
  clk: Don't hold prepare_lock when calling kref_put()
  clk: Remove prepare_lock hold assertion in __clk_release()
  clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()

jejb@linux.ibm.com no longer works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

Merge tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "A random set of small bug fixes:

   - Fix perf annotate TUI when used with data type profiling

   - Work around BPF verifier about sighand lock checking

  And a set of kernel header synchronization"

* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools/include: Sync arm64 asm/cputype.h with the kernel sources
  tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
  tools/include: Sync x86 asm/msr-index.h with the kernel sources
  tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
  tools/include: Sync x86 CPU feature headers with the kernel sources
  tools/include: Sync uapi/sound/asound.h with the kernel sources
  tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
  tools/include: Sync uapi/linux/fs.h with the kernel sources
  tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
  perf lock contention: Add a missing NULL check
  perf annotate: Make sure to call symbol__annotate2() in TUI

Pull hardening fixes from Kees Cook:

 - Correctly disable UBSAN configs in configs/hardening (Nathan
   Chancellor)

 - Add missing signed integer overflow trap types to arm64 handler

* tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ubsan: Add awareness of signed integer overflow traps
  configs/hardening: Disable CONFIG_UBSAN_SIGNED_WRAP
  configs/hardening: Fix disabling UBSAN configurations

Pull iommufd fixes from Jason Gunthorpe:
 "Two fixes for the selftests:

   - CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work

   - The kconfig fragment sshould include fault injection so the fault
     injection test can work"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Add config needed for iommufd_fail_nth
  iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest

Pull rdma fixes from Jason Gunthorpe:

 - Add a missing mutex_destroy() in rxe

 - Enhance the debugging print for cm_destroy failures to help debug
   these

 - Fix mlx5 MAD processing in cases where multiport devices are running
   in switchedev mode

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx5: Fix port number for counter query in multi-port configuration
  RDMA/cm: Print the old state when cm_destroy_id gets timeout
  RDMA/rxe: Fix the problem "mutex_destroy missing"

Pull fs/9p fixes from Eric Van Hensbergen:
 "This contains a reversion of one of the original 6.9 patches which
  seems to have been the cause of most of the instability. It also
  incorporates several fixes to legacy support and cache fixes.

  There are few additional changes to improve stability, but I want
  another week of testing before sending them upstream"

* tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: drop inodes immediately on non-.L too
  fs/9p: Revert "fs/9p: fix dups even in uncached mode"
  fs/9p: remove erroneous nlink init from legacy stat2inode
  9p: explicitly deny setlease attempts
  fs/9p: fix the cache always being enabled on files with qid flags
  fs/9p: translate O_TRUNC into OTRUNC
  fs/9p: only translate RWX permissions for plain 9P2000

Pull fuse fixes from Miklos Szeredi:

 - Fix two bugs in the new passthrough mode

 - Fix a statx bug introduced in v6.6

 - Fix code documentation

* tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  cuse: add kernel-doc comments to cuse_process_init_reply()
  fuse: fix leaked ENOSYS error on first statx call
  fuse: fix parallel dio write on file open in passthrough mode
  fuse: fix wrong ff->iomode state changes from parallel dio write

Pull arm64 fixes from Catalin Marinas:

 - Fix a kernel fault during page table walking in huge_pte_alloc() with
   PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc()

 - head.S fix and cleanup to disable the MMU before toggling the
   HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI
   stub. Changing this bit (currently from VHE to nVHE) causes some
   system registers as well as page table descriptors to be interpreted
   differently, potentially resulting in spurious MMU faults

 - Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP
   memory ranges due to kernel_page_present() returning true in most
   configurations other than rodata_full == true,
   CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: hibernate: Fix level3 translation fault in swsusp_save()
  arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
  arm64/head: Drop unnecessary pre-disable-MMU workaround
  arm64/hugetlb: Fix page table walk in huge_pte_alloc()

Pull s390 updates from Alexander Gordeev:

 - Fix NULL pointer dereference in program check handler

 - Fake IRBs are important events relevant for problem analysis. Add
   traces when queueing and delivering

 - Fix a race condition in ccw_device_set_online() that can cause the
   online process to fail

 - Deferred condition code 1 response indicates that I/O was not started
   and should be retried. The current QDIO implementation handles a cc1
   response as an error, resulting in a failed QDIO setup. Fix that by
   retrying the setup when a cc1 response is received

* tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: Fix NULL pointer dereference
  s390/cio: log fake IRB events
  s390/cio: fix race condition during online processing
  s390/qdio: handle deferred cc1

Merge tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull bootconfig fixes from Masami Hiramatsu:

 - Fix potential static_command_line buffer overrun.

   Currently we allocate the memory for static_command_line based on
   "boot_command_line", but it will copy "command_line" into it. So we
   use the length of "command_line" instead of "boot_command_line" (as
   we previously did)

 - Use memblock_free_late() in xbc_exit() instead of memblock_free()
   after the buddy system is initialized

 - Fix a kerneldoc warning

* tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Fix the kerneldoc of _xbc_exit()
  bootconfig: use memblock_free_late to free xbc memory to buddy
  init/main.c: Fix potential static_command_line memory overflow

Pull thermal control fix from Rafael Wysocki:
 "This prevents the thermal debug code from attempting to divide by zero
  and corrects trip point statistics (Rafael Wysocki)"

* tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()

Pull sound fixes from Takashi Iwai:
 "Things look calm and normal, we got handful HD-audio-related small
  fixes and a fix for MIDI 2.0 UMP handling"

* tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages
  ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC
  ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N
  ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4
  ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound
  ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1
  ALSA: hda/tas2781: correct the register for pow calibrated data
  ALSA: hda/realtek: Add quirk for HP SnowWhite laptops

Pull drm fixes from Dave Airlie:
 "Regular week of fixes, seems to be about right for this time in the
  release cycle, amdgpu, and nouveau are the main one with some
  scattered fixes otherwise.

  ttm:
   - Stop pooling cached NUMA pages

  amdgpu:
   - Fix invalid resource->start check
   - USB-C DSC fix
   - Fix a potential UAF in VA IOCTL
   - Fix visible VRAM handling during faults

  amdkfd:
   - Fix memory leak in create_process failure

  radeon:
   - Silence UBSAN warnings from variable sized arrays

  nouveau:
   - dp: Don't probe DP ports twice
   - nv04: Fix OOB access
   - nv50: Disable AUX bus for disconnected DP ports
   - nvkm: Fix instmem race condition

  panel:
   - Don't unregister DSI devices in several drivers

  v3d:
   - Fix enabled_ns increment

  xe:
   - Fix bo leak on error path during fb init
   - Fix use-after-free due to order vm is put and destroyed"

* tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel:
  drm/radeon: silence UBSAN warning (v3)
  drm/radeon: make -fstrict-flex-arrays=3 happy
  drm/amdgpu: fix visible VRAM handling during faults
  drm/amdgpu: validate the parameters of bo mapping operations more clearly
  Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"
  drm/amdkfd: Fix memory leak in create_process failure
  drm/amdgpu: remove invalid resource->start check v2
  drm/xe/vm: prevent UAF with asid based lookup
  drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init
  drm/panel: novatek-nt36682e: don't unregister DSI device
  drm/panel: visionox-rm69299: don't unregister DSI device
  drm/nouveau/dp: Don't probe eDP ports twice harder
  drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports
  drm/v3d: Don't increment `enabled_ns` twice
  drm/vmwgfx: Sort primary plane formats by order of preference
  drm/vmwgfx: Fix crtc's atomic check conditional
  drm/vmwgfx: Fix prime import/export
  drm/ttm: stop pooling cached NUMA pages v2
  drm: nv04: Fix out of bounds access
  nouveau: fix instmem race condition around ptr stores

Merge tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "15 hotfixes. 9 are cc:stable and the remainder address post-6.8 issues
  or aren't considered suitable for backporting.

  There are a significant number of fixups for this cycle's page_owner
  changes (series "page_owner: print stacks and their outstanding
  allocations"). Apart from that, singleton changes all over, mainly in
  MM"

* tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix OOB in nilfs_set_de_type
  MAINTAINERS: update Naoya Horiguchi's email address
  fork: defer linking file vma until vma is fully initialized
  mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
  mm,page_owner: defer enablement of static branch
  Squashfs: check the inode number is not the invalid value of zero
  mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
  mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
  mm/userfaultfd: allow hugetlb change protection upon poison entry
  mm,page_owner: fix printing of stack records
  mm,page_owner: fix accounting of pages when migrating
  mm,page_owner: fix refcount imbalance
  mm,page_owner: update metadata for tail pages
  userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE
  mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly

On arm64 machines, swsusp_save() faults if it attempts to access
MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI
when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n:

  Unable to handle kernel paging request at virtual address ffffff8000000000
  Mem abort info:
    ESR = 0x0000000096000007
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
    FSC = 0x07: level 3 translation fault
  Data abort info:
    ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
    CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
  swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000
  [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000
  Internal error: Oops: 0000000096000007 [#1] SMP
  Internal error: Oops: 0000000096000007 [#1] SMP
  Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm
  CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76
  Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0
  Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021
  pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : swsusp_save+0x280/0x538
  lr : swsusp_save+0x280/0x538
  sp : ffffffa034a3fa40
  x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000
  x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000
  x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2
  x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000
  x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666
  x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea
  x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0
  x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001
  x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027
  x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e
  Call trace:
   swsusp_save+0x280/0x538
   swsusp_arch_suspend+0x148/0x190
   hibernation_snapshot+0x240/0x39c
   hibernate+0xc4/0x378
   state_store+0xf0/0x10c
   kobj_attr_store+0x14/0x24

The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable()
-> kernel_page_present() assuming that a page is always present when
can_set_direct_map() is false (all of rodata_full,
debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false),
irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions
should not be saved during hibernation.

This problem was introduced by changes to the pfn_valid() logic in
commit a7d9f306 ("arm64: drop pfn_valid_within() and simplify
pfn_valid()").

Similar to other architectures, drop the !can_set_direct_map() check in
kernel_page_present() so that page_is_savable() skips such pages.

Fixes: a7d9f306 ("arm64: drop pfn_valid_within() and simplify pfn_valid()")
Cc: <stable@vger.kernel.org> # 5.14.x
Suggested-by: Mike Rapoport <rppt@kernel.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: xiongxin <xiongxin@kylinos.cn>
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240417025248.386622-1-tianyaxiong@kylinos.cn
[catalin.marinas@arm.com: rework commit message]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial device ids for 6.9-rc5

Here are some new modem device ids for 6.9-rc5.

All have been in linux-next with no reported issues.

* tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit FN920C04 rmnet compositions
  USB: serial: option: add Rolling RW101-GL and RW135-GL support
  USB: serial: option: add Lonsung U8300/U9300 product
  USB: serial: option: add support for Fibocom FM650/FG650
  USB: serial: option: support Quectel EM060K sub-models
  USB: serial: option: add Fibocom FM135-GL variants

In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which
is intended to confirm iocg is active when it has debt. However, warn
can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn()
is run at that time:

  WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190
  Call trace:
  iocg_pay_debt+0x14c/0x190
  iocg_kick_waitq+0x438/0x4c0
  iocg_waitq_timer_fn+0xd8/0x130
  __run_hrtimer+0x144/0x45c
  __hrtimer_run_queues+0x16c/0x244
  hrtimer_interrupt+0x2cc/0x7b0

The warn in this situation is meaningless. Since this iocg is being
removed, the state of the 'active_list' is irrelevant, and 'waitq_timer'
is canceled after removing 'active_list' in ioc_pd_free(), which ensures
iocg is freed after iocg_waitq_timer_fn() returns.

Therefore, add the check if iocg was already offlined to avoid warn
when removing a blkcg or disk.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The count field in struct trip_stats, representing the number of times
the zone temperature was above the trip point, needs to be incremented
in thermal_debug_tz_trip_up(), for two reasons.

First, if a trip point is crossed on the way up for the first time,
thermal_debug_update_temp() called from update_temperature() does
not see it because it has not been added to trips_crossed[] array
in the thermal zone's struct tz_debugfs object yet.  Therefore, when
thermal_debug_tz_trip_up() is called after that, the trip point's
count value is 0, and the attempt to divide by it during the average
temperature computation leads to a divide error which causes the kernel
to crash.  Setting the count to 1 before the division by incrementing it
fixes this problem.

Second, if a trip point is crossed on the way up, but it has been
crossed on the way up already before, its count value needs to be
incremented to make a record of the fact that the zone temperature is
above the trip now.  Without doing that, if the mitigations applied
after crossing the trip cause the zone temperature to drop below its
threshold, the count will not be updated for this episode at all and
the average temperature in the trip statistics record will be somewhat
higher than it should be.

Fixes: 7ef01f22 ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The conversion from MIDI2 to MIDI1 UMP messages had a leftover
artifact (superfluous bit shift), and this resulted in the bogus type
check, leading to empty outputs.  Let's fix it.

Fixes: e9e02819 ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://github.com/alsa-project/alsa-utils/issues/262
Message-ID: <20240419100442.14806-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The Haier Boyue G42 with ALC269VC cannot detect the MIC of headset,
the line out and internal speaker until
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Message-ID: <20240419082159.476879-1-aichao@kylinos.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

- Fix bo leak on error path during fb init
- Fix use-after-free due to order vm is put and destroyed
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/xjguifyantaibyrnymuiotxws6akiexi6r7tqyieqxgquovubc@kkrtbe24hjjr

Merge tag 'drm-misc-fixes-2024-04-18' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

nouveau:
- dp: Don't probe DP ports twice
- nv04: Fix OOB access
- nv50: Disable AUX bus for disconnected DP ports
- nvkm: Fix race condition

panel:
- Don't unregister DSI devices in several drivers

ttm:
- Stop pooling cached NUMA pages

v3d:
- Fix enabled_ns increment

vmwgfx:
- Fix PRIME import/export
- Fix CRTC's atomic check for primary planes
- Sort plane formats by preference
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240418072229.GA8983@localhost.localdomain