- 01 Oct, 2022 12 commits
-
-
Jakub Kicinski authored
Jiri Pirko says: ==================== devlink: sanitize per-port region creation/destruction Currently the only user of per-port devlink regions is DSA. All drivers that use regions register them before devlink registration. For DSA, this was not possible as the internals of struct devlink_port needed for region creation are initialized during port registration. This introduced a mismatch in creation flow of devlink and devlink port regions. As you can see, it causes the DSA driver to make the port init/exit flow a bit cumbersome. Fix this by introducing port_init/fini() which could be optionally called by drivers like DSA, to prepare struct devlink_port to be used for region creation purposes before devlink port register is called. Tested by Vladimir on his setup. ==================== Link: https://lore.kernel.org/r/20220929072902.2986539-1-jiri@resnulli.usSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
Since dsa_port_devlink_setup() and dsa_port_devlink_teardown() are already called from code paths which only execute once per port (due to the existing bool dp->setup), keeping another dp->devlink_port_setup is redundant, because we can already manage to balance the calls properly (and not call teardown when setup was never called, or call setup twice, or things like that). Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Jiri Pirko authored
Commit 3122433e ("net: dsa: Register devlink ports before calling DSA driver setup()") moved devlink port setup to be done early before driver setup() was called. That is no longer needed, so move the devlink port initialization back to dsa_port_setup(), as the first thing done there. Note there is no longer needed to reinit port as unused if dsa_port_setup() fails, as it unregisters the devlink port instance on the error path. Signed-off-by:
-
Vladimir Oltean authored
There is a desire to simplify the dsa_port registration path with devlink, and this involves reworking a bit how user ports which fail to connect to their PHY (because it's missing) get reinitialized as UNUSED devlink ports. The desire is for the change to look something like this; basically dsa_port_setup() has failed, we just change dp->type and call dsa_port_setup() again. -/* Destroy the current devlink port, and create a new one which has the UNUSED - * flavour. - */ -static int dsa_port_reinit_as_unused(struct dsa_port *dp) +static int dsa_port_setup_as_unused(struct dsa_port *dp) { - dsa_port_devlink_teardown(dp); dp->type = DSA_PORT_TYPE_UNUSED; - return dsa_port_devlink_setup(dp); + return dsa_port_setup(dp); } For an UNUSED port, dsa_port_setup() mostly only calls dsa_port_devlink_setup() anyway, so we could get away with calling just that. But if we call the full blown dsa_port_setup(dp) (which will be needed to properly set dp->setup = true), the callee will have the tendency to go through this code block too, and call dsa_port_disable(dp): switch (dp->type) { case DSA_PORT_TYPE_UNUSED: dsa_port_disable(dp); break; That is not very good, because dsa_port_disable() has this hidden inside of it: if (dp->pl) phylink_stop(dp->pl); Fact is, we are not prepared to handle a call to dsa_port_disable() with a struct dsa_port that came from a previous (and failed) call to dsa_port_setup(). We do not clean up dp->pl, and this will make the second call to dsa_port_setup() call phylink_stop() on a dangling dp->pl pointer. Solve this by creating an API for phylink destruction which is symmetric to the phylink creation, and never leave dp->pl set to anything except NULL or a valid phylink structure. Signed-off-by: -
Jiri Pirko authored
Move port_setup() op to be called before devlink_port_register() and port_teardown() after devlink_port_unregister(). Note it makes sense to move this alongside the rest of the devlink port code, the reinit() function also gets much nicer, as clearly the fact that port_setup()->devlink_port_region_create() was called in dsa_port_setup did not fit the flow. Signed-off-by:
-
Jiri Pirko authored
Lifetime of some of the devlink objects, like regions, is currently forced to be different for devlink instance and devlink port instance (per-port regions). The reason is that for devlink ports, the internal structures initialization happens only after devlink_port_register() is called. To resolve this inconsistency, introduce new set of helpers to allow driver to initialize devlink pointer and region list before devlink_register() is called. That allows port regions to be created before devlink port registration and destroyed after devlink port unregistration. Signed-off-by:
-
Jiri Pirko authored
Instead of relying on devlink pointer not being initialized, introduce an extra flag to indicate if devlink port is registered. This is needed as later on devlink pointer is going to be initialized even in case devlink port is not registered yet. Signed-off-by:
-
Jiri Pirko authored
Instead of checking devlink_port->devlink pointer for not being NULL which indicates that devlink port is registered, put this check to new pair of helpers similar to what we have for devlink and use them in other functions. Signed-off-by:
-
Chunhao Lin authored
rtl_disable_rxdvgate() is used for disable RXDV_GATE. It is opposite function of rtl_enable_rxdvgate(). Disable RXDV_GATE does not have to delay. So in this patch, also remove the delay after disale RXDV_GATE. Signed-off-by:
Chunhao Lin <hau@realtek.com> Link: https://lore.kernel.org/r/20220928171356.3951-1-hau@realtek.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next - Add RTL8761BUV device (Edimax BT-8500) - Add a new PID/VID 13d3/3583 for MT7921 - Add Realtek RTL8852C support ID 0x13D3:0x3592 - Add VID/PID 0489/e0e0 for MediaTek MT7921 - Add a new VID/PID 0e8d/0608 for MT7921 - Add a new PID/VID 13d3/3578 for MT7921 - Add BT device 0cb8:c549 from RTW8852AE - Add support for Intel Magnetor * tag 'for-net-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (49 commits) Bluetooth: hci_sync: Fix not indicating power state Bluetooth: L2CAP: Fix user-after-free Bluetooth: Call shutdown for HCI_USER_CHANNEL Bluetooth: Prevent double register of suspend Bluetooth: hci_core: Fix not handling link timeouts propertly Bluetooth: hci_event: Make sure ISO events don't affect non-ISO connections Bluetooth: hci_debugfs: Fix not checking conn->debugfs Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times Bluetooth: MGMT: fix zalloc-simple.cocci warnings Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create() Bluetooth: RFCOMM: Fix possible deadlock on socket shutdown/release Bluetooth: hci_sync: allow advertise when scan without RPA Bluetooth: btusb: Add a new VID/PID 0e8d/0608 for MT7921 Bluetooth: btusb: Add a new PID/VID 13d3/3583 for MT7921 Bluetooth: avoid hci_dev_test_and_set_flag() in mgmt_init_hdev() Bluetooth: btintel: Mark Intel controller to support LE_STATES quirk Bluetooth: btintel: Add support for Magnetor Bluetooth: btusb: Add a new PID/VID 13d3/3578 for MT7921 ... ==================== Link: https://lore.kernel.org/r/20221001004602.297366-1-luiz.dentz@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Commit 9c5d03d3 ("genetlink: start to validate reserved header bytes") introduced extra validation for genetlink headers. We had to gate it to only apply to new commands, to maintain bug-wards compatibility. Use this opportunity (before the new checks make it to Linus's tree) to add more conditions. Validate that Generic Netlink families do not use nlmsg_flags outside of the well-understood set. Link: https://lore.kernel.org/all/20220928073709.1b93b74a@kernel.org/Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20220929142809.1167546-1-kuba@kernel.orgSigned-off-by:
-
Luiz Augusto von Dentz authored
When setting power state using legacy/non-mgmt API (e.g hcitool hci0 up) the likes of mgmt_set_powered_complete won't be called causing clients of the MGMT API to not be notified of the change of the state. Fixes: cf75ad8b ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by:
Tedd Ho-Jeong An <tedd.an@intel.com>
-
- 30 Sep, 2022 28 commits
-
-
Jakub Kicinski authored
Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.1 Few stack changes and lots of driver changes in this round. brcmfmac has more activity as usual and it gets new hardware support. ath11k improves WCN6750 support and also other smaller features. And of course changes all over. Note: in early September wireless tree was merged to wireless-next to avoid some conflicts with mac80211 patches, this shouldn't cause any problems but wanted to mention anyway. Major changes: mac80211 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO) feature continues brcmfmac - support CYW43439 SDIO chipset - support BCM4378 on Apple platforms - support CYW89459 PCIe chipset rtw89 - more work to get rtw8852c supported - P2P support - support for enabling and disabling MSDU aggregation via nl80211 mt76 - tx status reporting improvements ath11k - cold boot calibration support on WCN6750 - Target Wake Time (TWT) debugfs support for STA interface - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - implement SRAM dump debugfs interface - enable threaded NAPI on all hardware - WoW support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz wcn36xx - add SNR from a received frame as a source of system entropy * tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits) wifi: rtl8xxxu: Improve rtl8xxxu_queue_select wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM wifi: rtl8xxxu: gen2: Enable 40 MHz channel width wifi: rtw89: 8852b: configure DLE mem wifi: rtw89: check DLE FIFO size with reserved size wifi: rtw89: mac: correct register of report IMR wifi: rtw89: pci: set power cut closed for 8852be wifi: rtw89: pci: add to do PCI auto calibration wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf wifi: rtw89: add DMA busy checking bits to chip info wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels wifi: rtw89: pci: mask out unsupported TX channels iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper wifi: iwlwifi: Track scan_cmd allocation size explicitly brcmfmac: Remove the call to "dtim_assoc" IOVAR brcmfmac: increase dcmd maximum buffer size brcmfmac: Support 89459 pcie brcmfmac: increase default max WOWL patterns to 16 cw1200: fix incorrect check to determine if no element is found in list ... ==================== Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 xsk updates part2 2022-09-28 XSK buffer improvements, This is part #2 of 4 parts series. 1) Expose xsk min chunk size to drivers, to allow the driver to adjust to a better buffer stride size 2) Adjust MTT page size to the XSK frame size, to avoid umem overrun in certain situations. 3) Use xsk frame size as the striding RQ page size for XSK RQs 4) KSM for unaligned XSK, KSM allows arbitrary buffer chunk lengths registration in HW, which makes more sense for unaligned XSK. 4) More cleanups and optimizations in preparation for next improvements in part3 part 1: https://lore.kernel.org/netdev/20220927203611.244301-1-saeed@kernel.org/ ==================== Link: https://lore.kernel.org/r/20220929072156.93299-1-saeed@kernel.orgSigned-off-by: -
Maxim Mikityanskiy authored
Although mlx5e_rq_free_shampo can be called unconditionally, it belongs to case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ. Move it there to allow to add more init/cleanup actions to the striding RQ case. If xdp_rxq_info_reg_mem_model fails, don't forget to destroy the page pool. Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Maxim Mikityanskiy authored
The same clear_bit is called in both error and success flows. Move the call to do it only once and remove the out label. Signed-off-by:
-
Maxim Mikityanskiy authored
To decrease the nesting level and reduce duplication of code, create functions to redirect direct RQTs to the actual RQs or drop_rq, which are used in the activation and deactivation flows of channels. Signed-off-by:
-
Maxim Mikityanskiy authored
mlx5e_xsk_page_alloc_pool became a thin wrapper around xsk_buff_alloc. Drop it and call xsk_buff_alloc directly. Signed-off-by:
-
Maxim Mikityanskiy authored
struct mlx5e_alloc_unit consists of a single union. Convert it to a union itself to simplify casting it to struct xdp_buff *, which will be used to implement XSK batching on striding RQ. Signed-off-by:
-
Maxim Mikityanskiy authored
mlx5e_alloc_unit stores the DMA address and a pointer to either struct page (regular RQ) or struct xdp_buff (XSK RQ). This DMA address is redundant, because when a page or an XSK frame is allocated, the same address is also stored there. Some flows take the address from struct mlx5e_alloc_unit, and some take it from struct page or xdp_buff. This commit removes the address from struct mlx5e_alloc_unit, which makes it twice as small and improves locality (this struct is used in an array), also saving on unnecessary stores to the addr field. Almost all flows know unambiguously whether the DMA address should be taken from page or from xdp_buff. The exception is the allocation flows, where a new branch appeared, which will be optimized out in the next commits. struct mlx5e_alloc_unit used to be called mlx5e_dma_info. Signed-off-by:
-
Maxim Mikityanskiy authored
The next commit will remove the DMA address from the struct currently called mlx5e_dma_info, because the same value can be retrieved with page_pool_get_dma_addr(page) in almost all cases, with the notable exception of SHAMPO (HW GRO implementation) that modifies this address on the fly, after the initial allocation. To keep the SHAMPO logic intact, struct mlx5e_dma_info remains in the SHAMPO code, consisting of addr and page (XSK is not compatible with SHAMPO). The struct used in all other places is renamed to mlx5e_alloc_unit, allowing the next commit to remove the addr field without affecting SHAMPO. The new name means "allocation unit", and it's more appropriate after the field with the DMA address gets removed. Signed-off-by:
-
Maxim Mikityanskiy authored
RX page cache stores dma_info structs, that consist of a pointer to struct page and a DMA address. In fact, the DMA address is extracted from struct page using page_pool_get_dma_addr when a page is pushed to the cache. By moving this call to the point when a page is popped from the cache, we can avoid storing the DMA address in the cache, effectively reducing its size by two times without losing any functionality. Signed-off-by:
-
Maxim Mikityanskiy authored
WQEs must not cross page boundaries, they are padded with NOPs if they don't fit the page. mlx5e_mpwrq_total_umr_wqebbs doesn't take into account this padding, risking reserving not enough space. The padding is not straightforward to add to this calculation, because WQEs of different sizes may be mixed together in the queue. If each page ends with a big WQE that doesn't fit and requires at most its size minus 1 WQEBB of padding, the total space can be much bigger than in case when smaller WQEs take advantage of this padding. Replace the wrong exact calculation by the following estimation. Each padding can be at most the size of the maximum WQE used in the queue minus one WQEBB. Let's call the rest of the page "useful space". If we divide the total size of all needed WQEs by this useful space, rounding up, we'll get the number of pages, which is enough to contain all these WQEs. It's correct, because every WQE that appeared on the boundary between two blocks of useful space would start in the useful space of one page and end in the padding of the same page, while our estimation reserved space for its tail in the next space, making the estimation not smaller than the real space occupied in the queue. The code actually uses a looser estimation: instead of taking the maximum size of all used WQE types minus 1 WQEBB, it takes the maximum hardware size of a WQE. It's made for simplicity and extensibility. Signed-off-by:
-
Maxim Mikityanskiy authored
The previous commit removed the last usage of xsk_buff_discard in mlx5e, so the function that is no longer used can be removed. Signed-off-by:
-
Maxim Mikityanskiy authored
UMR MTTs used in striding RQ have certain alignment requirements. While it's guaranteed to work when UMR pages are aligned to the UMR page size, in practice it works then UMR pages are aligned to 8 bytes. However, it's still not enough flexibility for the unaligned mode of XSK. This patch leverages KSM to map UMR pages without alignment requirements, when unaligned XSK is active. The downside is that KSM entries are twice as big as MTTs, which limits the maximum WQE size, so regular RQs and aligned XSK continue using MTTs. Signed-off-by:
-
Maxim Mikityanskiy authored
Some commands use a flexible array after a common header. Add a macro to safely calculate the total input length of the command, detecting overflows and printing errors with specific values when such overflows happen. Signed-off-by:
-
Maxim Mikityanskiy authored
Currently, rq->mkey_be keeps a big-endian value of either the PA MKey (for legacy RQ, no address translation) or MTT MKey (for striding RQ, direct address translation). Striding RQ stores the same value in rq->umr_mkey in the native endianness. The next commit will make striding RQ use KSM MKey (indirect address translation) for the unaligned mode of XSK, which will require storing both KSM MKey and PA MKey in the RQ struct. This commit optimizes fields of mlx5e_rq: umr_mkey is removed (it's redundant), mkey_be always points to the PA MKey, and mpwqe.umr_mkey_be points to the MTT MKey (or to the KSM MKey, starting from the next commit). Signed-off-by:
-
Maxim Mikityanskiy authored
XSK RQs support striding RQ linear mode, but the stride size is always set to PAGE_SIZE. It may be larger than the XSK frame size, unnecessarily reducing the useful space in a WQE, but more importantly causing UMEM data corruption in certain cases. Normally, stride size bigger than XSK frame size is not a problem if the hardware enforces the MTU. However, traffic between vports skips the hardware MTU check, and oversized packets may be received. If an oversized packet is bigger than the XSK frame but not bigger than the stride, it will cause overwriting of the adjacent UMEM region. If the packet takes more than one stride, they can be recycled for reuse so it's not a problem when the XSK frame size matches the stride size. To reduce the impact of the above issue, attempt to use the MTT page size for striding RQ that matches the XSK frame size, allowing to safely use 2048-byte frames on an up-to-date firmware. Signed-off-by:
-
Maxim Mikityanskiy authored
This commit allows striding RQ to determine MTT page size at runtime, instead of sticking to the compile-time PAGE_SIZE. This functionality will be used by a following commit that adjusts the MTT page size to the XSK frame size. Stick with PAGE_SIZE for XSK on legacy RQ, as frag_stride is not used in data path, it only helps calculate how pages are partitioned into fragments, and PAGE_SIZE will ensure each fragment starts at the beginning of a new allocation unit (XSK frame). Signed-off-by:
-
Maxim Mikityanskiy authored
Drivers should be aware of the range of valid UMEM chunk sizes to be able to allocate their internal structures of an appropriate size. It will be used by mlx5e in the following patches. Signed-off-by:
-
Hongbin Wang authored
There should be no space before the comma Signed-off-by:
Hongbin Wang <wh_bin@126.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jianguo Zhang says: ==================== Mediatek ethernet patches for mt8188 Changes in v7: v7: 1) Add 'Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>' info in commit message of patch 'dt-bindings: net: snps,dwmac: add new property snps,clk-csr', 'arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr'' and 'net: stmmac: add a parse for new property 'snps,clk-csr''. v6: 1) Update commit message of patch 'dt-bindings: net: snps,dwmac: add new property snps,clk-csr' 2) Add a parse for new property 'snps,clk-csr' in patch 'net: stmmac: add a parse for new property 'snps,clk-csr'' v5: 1) Rename the property 'clk_csr' as 'snps,clk-csr' in binding file as Krzysztof Kozlowski'comment. 2) Add DTS patch 'arm64: dts: mediatek: mt2712e: Update the name of property 'clk_csr'' as Krzysztof Kozlowski'comment. 3) Add driver patch 'net: stmmac: Update the name of property 'clk_csr'' as Krzysztof Kozlowski'comment. v4: 1) Update the commit message of patch 'dt-bindings: net: snps,dwmac: add clk_csr property' as Krzysztof Kozlowski'comment. v3: 1) List the names of SoCs mt8188 and mt8195 in correct order as AngeloGioacchino Del Regno's comment. 2) Add patch version info as Krzysztof Kozlowski'comment. v2: 1) Delete patch 'stmmac: dwmac-mediatek: add support for mt8188' as Krzysztof Kozlowski's comment. 2) Update patch 'dt-bindings: net: mediatek-dwmac: add support for mt8188' as Krzysztof Kozlowski's comment. 3) Add clk_csr property to fix warning ('clk_csr' was unexpected) when runnig 'make dtbs_check'. v1: 1) Add ethernet driver entry for mt8188. 2) Add binding document for ethernet on mt8188. ==================== Signed-off-by: -
Jianguo Zhang authored
Parse new property 'snps,clk-csr' firstly because the new property is documented in binding file, if failed, fall back to old property 'clk_csr' for legacy case Signed-off-by:
Jianguo Zhang <jianguo.zhang@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Jianguo Zhang authored
Update the name of property 'clk_csr' as 'snps,clk-csr' to align with the property name in the binding file. Signed-off-by:
-
Jianguo Zhang authored
Add description for new property snps,clk-csr in binding file Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Jianguo Zhang authored
Add binding document for the ethernet on mt8188 Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a devlink_health_report message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a literal string in the array bnad_net_stats_strings. Fix it. Signed-off-by:
-
Nick Child authored
Implement channel management functions to allow dynamic addition and removal of transmit queues. The `ethtool --show-channels` and `ethtool --set-channels` commands can be used to get and set the number of queues, respectively. Allow the ability to add as many transmit queues as available processors but never allow more than the hard maximum of 16. The number of receive queues is one and cannot be modified. Depending on whether the requested number of queues is larger or smaller than the current value, either allocate or free long term buffers. Since long term buffer construction and destruction can occur in two different areas, from either channel set requests or device open/close, define functions for performing this work. If allocation of a new buffer fails, then attempt to revert back to the previous number of queues. Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Signed-off-by:
-
Nick Child authored
The `ndo_start_xmit` function is protected by a spinlock on the tx queue being used to transmit the skb. Allow concurrent calls to `ndo_start_xmit` by using more than one tx queue. This allows for greater throughput when several jobs are trying to transmit data. Introduce 16 tx queues (leave single rx queue as is) which each correspond to one DMA mapped long term buffer. Signed-off-by:
-
