- 07 Oct, 2016 31 commits
-
-
Srinivas Ramana authored
commit 117e5e9c upstream. If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece458 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Srinivas Ramana <sramana@codeaurora.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Morse authored
commit 727653d6 upstream. gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls gic_compute_target_list() which advances the iterator by the number of CPUs in the cluster. If gic_compute_target_list() reaches the last CPU it leaves the iterator pointing at the last CPU. This means the next time round the for_each_cpu() loop cpumask_next() will be called with an invalid CPU. This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS: [ 3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000 [ 3.077943] CPU1: Booted secondary processor [410fd0f0] [ 3.078542] ------------[ cut here ]------------ [ 3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170 [ 3.078812] Modules linked in: [ 3.078869] [ 3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188 [ 3.078994] Hardware name: Foundation-v8A (DT) [ 3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000 [ 3.079145] PC is at gic_raise_softirq+0x12c/0x170 [ 3.079226] LR is at gic_raise_softirq+0xa4/0x170 [ 3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9 [ 3.081139] Call trace: [ 3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10) [ 3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170 [ 3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40 [ 3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88 [ 3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0 [ 3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8 [ 3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0 [ 3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370 [ 3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18 [ 3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0 [ 3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20 [ 3.083086] [<ffff000008103f80>] complete+0x40/0x60 [ 3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0 [ 3.083240] [<00000000808911a4>] 0x808911a4 [ 3.113401] Detected PIPT I-cache on CPU2 Avoid updating the iterator if the next call to cpumask_next() would cause the for_each_cpu() loop to exit. There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s eventual call to _find_next_bit() will return early as start >= nbits), this patch just silences the warning. Fixes: 021f6537 ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by:
James Morse <james.morse@arm.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Russell King authored
commit 56beac95 upstream. ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49 ("gpio: kill off set_irq_flags usage") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit f4693b08 upstream. We can't assign -EINVAL to a u16. Fixes: 3948f0e0 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Yan, Zheng authored
commit af5e5eb5 upstream. Readdir cache uses page cache to save dentry pointers. When adding dentry pointers to middle of a page, we need to make sure the page already exists. Otherwise the beginning part of the page will be invalid pointers. Signed-off-by:
Yan, Zheng <zyan@redhat.com> Cc: Nikolay Borisov <kernel@kyup.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit ff6e58e6 upstream. fw-dbg code return ret but that variable was either 0 or not initialised. Return 0 always. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 6a951267 ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Sara Sharon authored
commit d5d0689a upstream. This fixes a pretty ancient bug that hasn't manifested itself until now. The scratchbuf for command queue is allocated only for 32 slots but is accessed with the queue write pointer - which can be up to 256. Since the scratch buf size was 16 and there are up to 256 TFDs we never passed a page boundary when accessing the scratch buffer, but when attempting to increase the size of the scratch buffer a panic was quick to follow when trying to access the address resulted in a page boundary. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Fixes: 38c0f334 ("iwlwifi: use coherent DMA memory for command header") Signed-off-by:
-
Geert Uytterhoeven authored
commit c3ccf357 upstream. The conversion from a look-up table to a calculation for clock generator parameters forgot to take into account that BRDV x 1/1 is valid only if BRPS is x 1/1 or x 1/2, leading to undefined behavior (e.g. arbitrary clock rates). This limitation is documented for the MSIOF module in all supported SH/R-Mobile and R-Car Gen2/Gen3 ARM SoCs. Tested on r8a7791/koelsch and r8a7795/salvator-x. Fixes: 65d5665b ("spi: sh-msiof: Update calculation of frequency dividing") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Michael Walle authored
commit b53893aa upstream. According to the datasheet you should only write 1 to this bit. If it is not set, at least AIN3 will return bad values on newer silicon revisions. Fixes: d84ca5b3 ("hwmon: Add driver for ADT7411 voltage and temperature sensor") Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
commit a6c50912 upstream. nvmem_cell_read() is declared as void * if CONFIG_NVMEM is enabled, and as char * otherwise. This can result in a build warning if CONFIG_NVMEM is not enabled and a caller asigns the result to a type other than char * without using a typecast. Use a consistent declaration to avoid the problem. Fixes: e2a5402e ("nvmem: Add nvmem_device based consumer apis.") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Quentin Armitage authored
commit 3777ed68 upstream. When using HEAD from https://git.kernel.org/cgit/utils/kernel/ipvsadm/ipvsadm.git/, the command: ipvsadm --start-daemon backup --mcast-interface eth0.60 \ --mcast-group ff02::1:81 fails with the error message: Argument list too long whereas both: ipvsadm --start-daemon master --mcast-interface eth0.60 \ --mcast-group ff02::1:81 and: ipvsadm --start-daemon backup --mcast-interface eth0.60 \ --mcast-group 224.0.0.81 are successful. The error message "Argument list too long" isn't helpful. The error occurs because an IPv6 address is given in backup mode. The error is in make_receive_sock() in net/netfilter/ipvs/ip_vs_sync.c, since it fails to set the interface on the address or the socket before calling inet6_bind() (via sock->ops->bind), where the test 'if (!sk->sk_bound_dev_if)' failed. Setting sock->sk->sk_bound_dev_if on the socket before calling inet6_bind() resolves the issue. Fixes: d3328817 ("ipvs: add more mcast parameters for the sync daemon") Signed-off-by:
Quentin Armitage <quentin@armitage.org.uk> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Dan Carpenter authored
commit 2d6a4d64 upstream. The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwandaSigned-off-by:
Christoph Lameter <cl@linux.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Robert Jarzmik authored
commit b3802db5 upstream. As reported by Dan in his report in [1], there is a potential NULL pointer derefence if these conditions are met : - there is no platform_data provided, ie. host->pdata = NULL Fix this by only using the platform data ro_invert when a gpio for read-only is provided by the platform data. This doesn't appear yet as every pxa board provides a platform_data, and calls pxa_set_mci_info() with a non NULL pointer. [1] [bug report] mmc: pxamci: fix card detect with slot-gpio API. The commit fd546ee6 ("mmc: pxamci: fix card detect with slot-gpio API") from Sep 26, 2015, leads to the following static checker warning: drivers/mmc/host/pxamci.c:809 pxamci_probe() warn: variable dereferenced before check 'host->pdata' (see line 798) Fixes: fd546ee6 ("mmc: pxamci: fix card detect with slot-gpio API") Reported-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Stefan Wahren authored
commit 75324684 upstream. In case of a IRQ type mismatch in of_pmu_irq_cfg() the device node for interrupt affinity isn't freed. So fix this issue by calling of_node_put(). Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: fa8ad788 ("arm: perf: factor arm_pmu core out to drivers") Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Andy Shevchenko authored
commit 7440926e upstream. Documentation incorrectly refers to struct pinctrl_desc, where no such flag is available. Replace the name of the struct. Fixes: commit 8c4c2016 ("pinctrl: move strict option to pinmux_ops") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Masahiro Yamada authored
commit 10ef8277 upstream. Without this, reading the "pins" in the debugfs causes kernel BUG. Fixes: 6e908892 ("pinctrl: UniPhier: add UniPhier pinctrl core support") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Heinrich Schuchardt authored
commit cd956722 upstream. In function i40e_debug_aq parameter desc is assumed to be possibly NULL. Do not dereference it before checking the value. Fixes: f905dd62 ("i40e/i40evf: add max buf len to aq debug print helper") Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Mark Rutland authored
commit 2c81a647 upstream. The following commit: 66eb579e ("perf: allow for PMU-specific event filtering") added the pmu::filter_match() callback. This was intended to avoid HW constraints on events from resulting in extremely pessimistic scheduling. However, pmu::filter_match() is only called for the leader of each event group. When the leader is a SW event, we do not filter the groups, and may fail at pmu::add() time, and when this happens we'll give up on scheduling any event groups later in the list until they are rotated ahead of the failing group. This can result in extremely sub-optimal event scheduling behaviour, e.g. if running the following on a big.LITTLE platform: $ taskset -c 0 ./perf stat \ -e 'a57{context-switches,armv8_cortex_a57/config=0x11/}' \ -e 'a53{context-switches,armv8_cortex_a53/config=0x11/}' \ ls <not counted> context-switches (0.00%) <not counted> armv8_cortex_a57/config=0x11/ (0.00%) 24 context-switches (37.36%) 57589154 armv8_cortex_a53/config=0x11/ (37.36%) Here the 'a53' event group was always eligible to be scheduled, but the 'a57' group never eligible to be scheduled, as the task was always affine to a Cortex-A53 CPU. The SW (group leader) event in the 'a57' group was eligible, but the HW event failed at pmu::add() time, resulting in ctx_flexible_sched_in giving up on scheduling further groups with HW events. One way of avoiding this is to check pmu::filter_match() on siblings as well as the group leader. If any of these fail their pmu::filter_match() call, we must skip the entire group before attempting to add any events. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Fixes: 66eb579e ("perf: allow for PMU-specific event filtering") Link: http://lkml.kernel.org/r/1465917041-15339-1-git-send-email-mark.rutland@arm.com [ Small readability edits. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Johannes Berg authored
commit 280a3efa upstream. My cleanup in "iwlwifi: prepare for higher API/CAPA bits" accidentally inverted a few tests - fix them. Fixes: 859d914c ("iwlwifi: prepare for higher API/CAPA bits") Reported-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Cristian Birsan authored
commit 4c2ba0c6 upstream. Commit ac33cdb1 ("usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part5") introduces a problem setting DMA host mode. The musb_advance_schedule() is called immediately after receiving an endpoint RX interrupt without waiting for the DMA transfer to complete. As a consequence when the dma complete interrupt arrives the in_qh member of hw_ep is already null an the musb_host_rx() exits on !urb error case. Fix the done condition that advances the musb schedule. Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
Joshua Henderson <joshua.henderson@microchip.com> Tested-by:
Ladislav Michl <ladis@linux-mips.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Adam Ford <aford173@gmail.com> Signed-off-by:
-
Cristian Birsan authored
commit bba40e69 upstream. Commit 754fe4a9 ("usb: musb: Remove ifdefs for TX DMA for musb_host.c") introduces a problem setting the desired channel mode for the Mentor DMA engine. There is a case where an address is incorrectly assigned to the DMA channel desired mode when it should instead be assigned the actual mode value. This results in the value of channel->desired_mode not being correct. Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Roger Quadros authored
commit d248220f upstream. Since commit 6ce0d200 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d200 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Robin Murphy authored
commit ba6dea4f upstream. Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Alex Deucher authored
commit 670bb4fd upstream. Add clock quirks for Jet parts. Reviewed-by:
Sonny Jiang <sonny.jiang@amd.com> Tested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ilia Mirkin authored
commit 666ca3d8 upstream. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 05fb3c19 upstream. Otherwise arch_task_struct_size == 0 and we die. While we're at it, set X86_FEATURE_ALWAYS, too. Reported-by:
David Saggiorato <david@saggiorato.net> Tested-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: aaeb5c01c5b ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86") Link: http://lkml.kernel.org/r/8de723afbf0811071185039f9088733188b606c9.1475103911.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit e1bfc11c upstream. cr4_init_shadow() will panic on 486-like machines without CR4. Fix it using __read_cr4_safe(). Reported-by: david@saggiorato.net Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") Link: http://lkml.kernel.org/r/43a20f81fb504013bf613913dc25574b45336a61.1475091074.git.luto@kernel.orgSigned-off-by:
-
Sergei Miroshnichenko authored
commit 9abefcb1 upstream. A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24Signed-off-by:
Sergei Miroshnichenko <sergeimir@emcraft.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
zhong jiang authored
commit 5b398e41 upstream. I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Hugh Dickins <hughd@google.com> Suggested-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
-
Karl Beldan authored
commit f6d7c1b5 upstream. This fixes subpage writes when using 4-bit HW ECC. There has been numerous reports about ECC errors with devices using this driver for a while. Also the 4-bit ECC has been reported as broken with subpages in [1] and with 16 bits NANDs in the driver and in mach* board files both in mainline and in the vendor BSPs. What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to try reinitializing the ECC engine: - R/W on whole pages properly generates/checks RS code - try writing the 1st subpage only of a blank page, the subpage is well written and the RS code properly generated, re-reading the same page the HW detects some ECC error, reading the same page again no ECC error is detected Note that the ECC engine is already reinitialized in the 1-bit case. Tested on my LCDK with UBI+UBIFS using subpages. This could potentially get rid of the issue workarounded in [1]. [1] 28c015a9 ("mtd: davinci-nand: disable subpage write for keystone-nand") Fixes: 6a4123e5 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage") Signed-off-by:
Karl Beldan <kbeldan@baylibre.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Joonwoo Park authored
commit 28b89b9e upstream. A discrepancy between cpu_online_mask and cpuset's effective_cpus mask is inevitable during hotplug since cpuset defers updating of effective_cpus mask using a workqueue, during which time nothing prevents the system from more hotplug operations. For that reason guarantee_online_cpus() walks up the cpuset hierarchy until it finds an intersection under the assumption that top cpuset's effective_cpus mask intersects with cpu_online_mask even with such a race occurring. However a sequence of CPU hotplugs can open a time window, during which none of the effective CPUs in the top cpuset intersect with cpu_online_mask. For example when there are 4 possible CPUs 0-3 and only CPU0 is online: ======================== =========================== cpu_online_mask top_cpuset.effective_cpus ======================== =========================== echo 1 > cpu2/online. CPU hotplug notifier woke up hotplug work but not yet scheduled. [0,2] [0] echo 0 > cpu0/online. The workqueue is still runnable. [2] [0] ======================== =========================== Now there is no intersection between cpu_online_mask and top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at this moment can cause following: Unable to handle kernel NULL pointer dereference at virtual address 000000d0 ------------[ cut here ]------------ Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable] Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98 task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000 PC is at guarantee_online_cpus+0x2c/0x58 LR is at cpuset_cpus_allowed+0x4c/0x6c <snip> Process taskset (pid: 1420, stack limit = 0xffffffc06e124020) Call trace: [<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58 [<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c [<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac [<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac [<ffffffc000085cb0>] el0_svc_naked+0x24/0x28 The top cpuset's effective_cpus are guaranteed to be identical to cpu_online_mask eventually. Hence fall back to cpu_online_mask when there is no intersection between top cpuset's effective_cpus and cpu_online_mask. Signed-off-by:
Joonwoo Park <joonwoop@codeaurora.org> Acked-by:
Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: cgroups@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 30 Sep, 2016 9 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit 8a545f18 upstream. We can't pass error pointers to kfree() or it causes an oops. Fixes: 52b209f7 ('get rid of hostfs_read_inode()') Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Dan Carpenter authored
commit f4cceb2a upstream. If kmap fails, it leads to memory corruption. Fixes: f64122c1 ('drm: add new QXL driver. (v1.4)') Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwandaSigned-off-by:
-
Sven Van Asbroeck authored
commit 5381cfb6 upstream. The device's model download function returns the model data as an array of u32s, which is later compared to the reference model data. However, since the latter is an array of u16s, the comparison does not happen correctly, and model verification fails. This in turn breaks the POR initialization sequence. Fixes: 39e7213e ("max17042_battery: Support regmap to access device's registers") Reported-by:
Sven Van Asbroeck <TheSven73@googlemail.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Wei Yongjun authored
commit 33e7664a upstream. Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Fixes: 3636859b ("power_supply: Add support for tps65217-charger") Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
James Morse authored
commit 924d8696 upstream. rtree_next_node() walks the linked list of leaf nodes to find the next block of pages in the struct memory_bitmap. If it walks off the end of the list of nodes, it walks the list of memory zones to find the next region of memory. If it walks off the end of the list of zones, it returns false. This leaves the struct bm_position's node and zone pointers pointing at their respective struct list_heads in struct mem_zone_bm_rtree. memory_bm_find_bit() uses struct bm_position's node and zone pointers to avoid walking lists and trees if the next bit appears in the same node/zone. It handles these values being stale. Swap rtree_next_node()s 'step then test' to 'test-next then step', this means if we reach the end of memory we return false and leave the node and zone pointers as they were. This fixes a panic on resume using AMD Seattle with 64K pages: [ 6.868732] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 6.875753] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 6.896453] PM: Using 3 thread(s) for decompression. [ 6.896453] PM: Loading and decompressing image data (5339 pages)... [ 7.318890] PM: Image loading progress: 0% [ 7.323395] Unable to handle kernel paging request at virtual address 00800040 [ 7.330611] pgd = ffff000008df0000 [ 7.334003] [00800040] *pgd=00000083fffe0003, *pud=00000083fffe0003, *pmd=00000083fffd0003, *pte=0000000000000000 [ 7.344266] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 7.349825] Modules linked in: [ 7.352871] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W I 4.8.0-rc1 #4737 [ 7.360512] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016 [ 7.369109] task: ffff8003c0220000 task.stack: ffff8003c0280000 [ 7.375020] PC is at set_bit+0x18/0x30 [ 7.378758] LR is at memory_bm_set_bit+0x24/0x30 [ 7.383362] pc : [<ffff00000835bbc8>] lr : [<ffff0000080faf18>] pstate: 60000045 [ 7.390743] sp : ffff8003c0283b00 [ 7.473551] [ 7.475031] Process swapper/0 (pid: 1, stack limit = 0xffff8003c0280020) [ 7.481718] Stack: (0xffff8003c0283b00 to 0xffff8003c0284000) [ 7.800075] Call trace: [ 7.887097] [<ffff00000835bbc8>] set_bit+0x18/0x30 [ 7.891876] [<ffff0000080fb038>] duplicate_memory_bitmap.constprop.38+0x54/0x70 [ 7.899172] [<ffff0000080fcc40>] snapshot_write_next+0x22c/0x47c [ 7.905166] [<ffff0000080fe1b4>] load_image_lzo+0x754/0xa88 [ 7.910725] [<ffff0000080ff0a8>] swsusp_read+0x144/0x230 [ 7.916025] [<ffff0000080fa338>] load_image_and_restore+0x58/0x90 [ 7.922105] [<ffff0000080fa660>] software_resume+0x2f0/0x338 [ 7.927752] [<ffff000008083350>] do_one_initcall+0x38/0x11c [ 7.933314] [<ffff000008b40cc0>] kernel_init_freeable+0x14c/0x1ec [ 7.939395] [<ffff0000087ce564>] kernel_init+0x10/0xfc [ 7.944520] [<ffff000008082e90>] ret_from_fork+0x10/0x40 [ 7.949820] Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) [ 7.955909] ---[ end trace 0024a5986e6ff323 ]--- [ 7.960529] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Here struct mem_zone_bm_rtree's start_pfn has been returned instead of struct rtree_node's addr as the node/zone pointers are corrupt after we walked off the end of the lists during mark_unsafe_pages(). This behaviour was exposed by commit 6dbecfd3 ("PM / hibernate: Simplify mark_unsafe_pages()"), which caused mark_unsafe_pages() to call duplicate_memory_bitmap(), which uses memory_bm_find_bit() after walking off the end of the memory bitmap. Fixes: 3a20cb17 (PM / Hibernate: Implement position keeping in radix tree) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Thomas Garnier authored
commit 62822e2e upstream. Restore the processor state before calling any other functions to ensure per-CPU variables can be used with KASLR memory randomization. Tracing functions use per-CPU variables (GS based on x86) and one was called just before restoring the processor state fully. It resulted in a double fault when both the tracing & the exception handler functions tried to use a per-CPU variable. Fixes: bb3632c6 (PM / sleep: trace events for suspend/resume) Reported-and-tested-by:
Jiri Kosina <jikos@kernel.org> Tested-by:
Rafael J. Wysocki <rafael@kernel.org> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Thomas Garnier <thgarnie@google.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Matt Redfearn authored
commit 951c39cd upstream. If the paravirt machine is compiles without CONFIG_SMP, the following linker error occurs arch/mips/kernel/head.o: In function `kernel_entry': (.ref.text+0x10): undefined reference to `smp_bootstrap' due to the kernel entry macro always including SMP startup code. Wrap this code in CONFIG_SMP to fix the error. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14212/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Huacai Chen authored
commit 3cbc6fc9 upstream. Commit 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") missing a ".set pop" in macro fpu_restore_16even, so add it. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Acked-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14210/Signed-off-by:
-
