Add a new pwq into the tail of wq->pwqs so that pwq iteration will
start from the oldest pwq to the newest. This ordering will facilitate
the inclusion of ordered workqueues in a wq_unbound_cpumask update.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The for-6.8-fixes commit ae9cc8956944 ("Revert "workqueue: Override implicit
ordered attribute in workqueue_apply_unbound_cpumask()") also fixes build for
Signed-off-by: Tejun Heo <tj@kernel.org>

This reverts commit ca10d851.

The commit allowed workqueue_apply_unbound_cpumask() to clear __WQ_ORDERED
on now removed implicitly ordered workqueues. This was incorrect in that
system-wide config change shouldn't break ordering properties of all
workqueues. The reason why apply_workqueue_attrs() path was allowed to do so
was because it was targeting the specific workqueue - either the workqueue
had WQ_SYSFS set or the workqueue user specifically tried to change
max_active, both of which indicate that the workqueue doesn't need to be
ordered.

The implicitly ordered workqueue promotion was removed by the previous
commit 3bc1e711 ("workqueue: Don't implicitly make UNBOUND workqueues w/
@max_active==1 ordered"). However, it didn't update this path and broke
build. Let's revert the commit which was incorrect in the first place which
also fixes build.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3bc1e711 ("workqueue: Don't implicitly make UNBOUND workqueues w/ @max_active==1 ordered")
Fixes: ca10d851 ("workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>

5c0338c6 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
automoatically promoted UNBOUND workqueues w/ @max_active==1 to ordered
workqueues because UNBOUND workqueues w/ @max_active==1 used to be the way
to create ordered workqueues and the new NUMA support broke it. These
problems can be subtle and the fact that they can only trigger on NUMA
machines made them even more difficult to debug.

However, overloading the UNBOUND allocation interface this way creates other
issues. It's difficult to tell whether a given workqueue actually needs to
be ordered and users that legitimately want a min concurrency level wq
unexpectedly gets an ordered one instead. With planned UNBOUND workqueue
udpates to improve execution locality and more prevalence of chiplet designs
which can benefit from such improvements, this isn't a state we wanna be in
forever.

There aren't that many UNBOUND w/ @max_active==1 users in the tree and the
preceding patches audited all and converted them to
alloc_ordered_workqueue() as appropriate. This patch removes the implicit
promotion of UNBOUND w/ @max_active==1 workqueues to ordered ones.

v2: v1 patch incorrectly dropped !list_empty(&wq->pwqs) condition in
    apply_workqueue_attrs_locked() which spuriously triggers WARNING and
    fails workqueue creation. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304251050.45a5df1f-oliver.sang@intel.com

Skip updating workqueues with __WQ_DESTROYING bit set when updating
global unbound cpumask to avoid unnecessary work and other complications.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

There should be three, fix it.
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This reverts commit d412ace1. This leads to
build failures as it depends on a driver-core commit 32f78abe ("driver
core: bus: constantify subsys_register() calls"). Let's drop it from wq tree
and route it through driver-core tree.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402051505.kM9Rr3CJ-lkp@intel.com/

The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws such as
the execution code accessing the tasklet item after the execution is
complete which can lead to subtle use-after-free in certain usage scenarios
and less-developed flush and cancel mechanisms.

This patch implements BH workqueues which share the same semantics and
features of regular workqueues but execute their work items in the softirq
context. As there is always only one BH execution context per CPU, none of
the concurrency management mechanisms applies and a BH workqueue can be
thought of as a convenience wrapper around softirq.

Except for the inability to sleep while executing and lack of max_active
adjustments, BH workqueues and work items should behave the same as regular
workqueues and work items.

Currently, the execution is hooked to tasklet[_hi]. However, the goal is to
convert all tasklet users over to BH workqueues. Once the conversion is
complete, tasklet can be removed and BH workqueues can directly take over
the tasklet softirqs.

system_bh[_highpri]_wq are added. As queue-wide flushing doesn't exist in
tasklet, all existing tasklet users should be able to use the system BH
workqueues without creating their own workqueues.

v3: - Add missing interrupt.h include.

v2: - Instead of using tasklets, hook directly into its softirq action
      functions - tasklet[_hi]_action(). This is slightly cheaper and closer
      to the eventual code structure we want to arrive at. Suggested by Lai.

    - Lai also pointed out several places which need NULL worker->task
      handling or can use clarification. Updated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CAHk-=wjDW53w4-YcSmgKC5RruiRLHmJ1sXeYdp_ZgVoBw=5byA@mail.gmail.comTested-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

Factor out init_cpu_worker_pool() from workqueue_init_early(). This is pure
reorganization in preparation of BH workqueue support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Allen Pais <allen.lkml@gmail.com>

These changes are in preparation of BH workqueue which will execute work
items from BH context.

- Update lock and RCU depth checks in process_one_work() so that it
  remembers and checks against the starting depths and prints out the depth
  changes.

- Factor out lockdep annotations in the flush paths into
  touch_{wq|work}_lockdep_map(). The work->lockdep_map touching is moved
  from __flush_work() to its callee - start_flush_work(). This brings it
  closer to the wq counterpart and will allow testing the associated wq's
  flags which will be needed to support BH workqueues. This is not expected
  to cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Allen Pais <allen.lkml@gmail.com>

Now that the driver core can properly handle constant struct bus_type,
move the wq_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-and-reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Tejun Heo <tj@kernel.org>

dd6c3c54 ("workqueue: Move pwq_dec_nr_in_flight() to the end of work
item handling") relocated pwq_dec_nr_in_flight() after
set_work_pool_and_keep_pending(). However, the latter destroys information
contained in work->data that's needed by pwq_dec_nr_in_flight() including
the flush color. With flush color destroyed, flush_workqueue() can stall
easily when mixed with cancel_work*() usages.

This is easily triggered by running xfstests generic/001 test on xfs:

     INFO: task umount:6305 blocked for more than 122 seconds.
     ...
     task:umount          state:D stack:13008 pid:6305  tgid:6305  ppid:6301   flags:0x00004000
     Call Trace:
      <TASK>
      __schedule+0x2f6/0xa20
      schedule+0x36/0xb0
      schedule_timeout+0x20b/0x280
      wait_for_completion+0x8a/0x140
      __flush_workqueue+0x11a/0x3b0
      xfs_inodegc_flush+0x24/0xf0
      xfs_unmountfs+0x14/0x180
      xfs_fs_put_super+0x3d/0x90
      generic_shutdown_super+0x7c/0x160
      kill_block_super+0x1b/0x40
      xfs_kill_sb+0x12/0x30
      deactivate_locked_super+0x35/0x90
      deactivate_super+0x42/0x50
      cleanup_mnt+0x109/0x170
      __cleanup_mnt+0x12/0x20
      task_work_run+0x60/0x90
      syscall_exit_to_user_mode+0x146/0x150
      do_syscall_64+0x5d/0x110
      entry_SYSCALL_64_after_hwframe+0x6c/0x74

Fix it by stashing work_data before calling set_work_pool_and_keep_pending()
and using the stashed value for pwq_dec_nr_in_flight().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Link: http://lkml.kernel.org/r/87o7cxeehy.fsf@debian-BULLSEYE-live-builder-AMD64
Fixes: dd6c3c54 ("workqueue: Move pwq_dec_nr_in_flight() to the end of work item handling")

Commit e563d0a7 ("workqueue: Break up enum definitions and give
names to the types") gives a name to the `enum` where `WORK_CPU_UNBOUND`
was defined, so `bindgen` changes its output from e.g.:

    pub type _bindgen_ty_10 = core::ffi::c_uint;
    pub const WORK_CPU_UNBOUND: _bindgen_ty_10 = 64;

to e.g.:

    pub type wq_misc_consts = core::ffi::c_uint;
    pub const wq_misc_consts_WORK_CPU_UNBOUND: wq_misc_consts = 64;

Thus update Rust's side to match the change (which requires a slight
reformat of the code), fixing the build error.

Closes: https://lore.kernel.org/rust-for-linux/CANiq72=9PZ89bCAVX0ZV4cqrYSLoZWyn-d_K4KpBMHjwUMdC3A@mail.gmail.com/
Fixes: e563d0a7 ("workqueue: Break up enum definitions and give names to the types")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

System workqueues are allocated early during boot from
workqueue_init_early(). While allocating unbound workqueues,
wq_update_node_max_active() is invoked from apply_workqueue_attrs() and
accesses NUMA topology to initialize wq->node_nr_active[].max.

However, topology information may not be set up at this point.
wq_update_node_max_active() is explicitly invoked from
workqueue_init_topology() later when topology information is known to be
available.

This doesn't seem to crash anything but it's doing useless work with dubious
data. Let's skip the premature and duplicate node_max_active updates by
initializing the field to WQ_DFL_MIN_ACTIVE on allocation and making
wq_update_node_max_active() noop until workqueue_init_topology().
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 kernel/workqueue.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 9221a4c57ae1..a65081ec6780 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -386,6 +386,8 @@ static const char *wq_affn_names[WQ_AFFN_NR_TYPES] = {
 	[WQ_AFFN_SYSTEM]		= "system",
 };

+static bool wq_topo_initialized = false;
+
 /*
  * Per-cpu work items which run for longer than the following threshold are
  * automatically considered CPU intensive and excluded from concurrency
@@ -1510,6 +1512,9 @@ static void wq_update_node_max_active(struct workqueue_struct *wq, int off_cpu)

 	lockdep_assert_held(&wq->mutex);

+	if (!wq_topo_initialized)
+		return;
+
 	if (!cpumask_test_cpu(off_cpu, effective))
 		off_cpu = -1;

@@ -4356,6 +4361,7 @@ static void free_node_nr_active(struct wq_node_nr_active **nna_ar)

 static void init_node_nr_active(struct wq_node_nr_active *nna)
 {
+	nna->max = WQ_DFL_MIN_ACTIVE;
 	atomic_set(&nna->nr, 0);
 	raw_spin_lock_init(&nna->lock);
 	INIT_LIST_HEAD(&nna->pending_pwqs);
@@ -7400,6 +7406,8 @@ void __init workqueue_init_topology(void)
 	init_pod_type(&wq_pod_types[WQ_AFFN_CACHE], cpus_share_cache);
 	init_pod_type(&wq_pod_types[WQ_AFFN_NUMA], cpus_share_numa);

+	wq_topo_initialized = true;
+
 	mutex_lock(&wq_pool_mutex);

 	/*

For wq_update_node_max_active(), @off_cpu of -1 indicates that no CPU is
going down. The function was incorrectly calling cpumask_test_cpu() with -1
CPU leading to oopses like the following on some archs:

  Unable to handle kernel paging request at virtual address ffff0002100296e0
  ..
  pc : wq_update_node_max_active+0x50/0x1fc
  lr : wq_update_node_max_active+0x1f0/0x1fc
  ...
  Call trace:
    wq_update_node_max_active+0x50/0x1fc
    apply_wqattrs_commit+0xf0/0x114
    apply_workqueue_attrs_locked+0x58/0xa0
    alloc_workqueue+0x5ac/0x774
    workqueue_init_early+0x460/0x540
    start_kernel+0x258/0x684
    __primary_switched+0xb8/0xc0
  Code: 9100a273 35000d01 53067f00 d0016dc1 (f8607a60)
  ---[ end trace 0000000000000000 ]---
  Kernel panic - not syncing: Attempted to kill the idle task!
  ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: http://lkml.kernel.org/r/91eacde0-df99-4d5c-a980-91046f66e612@samsung.com
Fixes: 5797b1c1 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")

When __queue_delayed_work() is called, it chooses a cpu for handling the
timer interrupt. As of today, it will pick either the cpu passed as
parameter or the last cpu used for this.

This is not good if a system does use CPU isolation, because it can take
away some valuable cpu time to:
1 - deal with the timer interrupt,
2 - schedule-out the desired task,
3 - queue work on a random workqueue, and
4 - schedule the desired task back to the cpu.

So to fix this, during __queue_delayed_work(), if cpu isolation is in
place, pick a random non-isolated cpu to handle the timer interrupt.

As an optimization, if the current cpu is not isolated, use it instead
of looking for another candidate.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Print out per-node nr/max_active numbers to improve visibility into
node_nr_active operations.
Signed-off-by: Tejun Heo <tj@kernel.org>

A pool_workqueue (pwq) represents the connection between a workqueue and a
worker_pool. One of the roles that a pwq plays is enforcement of the
max_active concurrency limit. Before 636b927e ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues"), there was one pwq per each CPU
for per-cpu workqueues and per each NUMA node for unbound workqueues, which
was a natural result of per-cpu workqueues being served by per-cpu pools and
unbound by per-NUMA pools.

In terms of max_active enforcement, this was, while not perfect, workable.
For per-cpu workqueues, it was fine. For unbound, it wasn't great in that
NUMA machines would get max_active that's multiplied by the number of nodes
but didn't cause huge problems because NUMA machines are relatively rare and
the node count is usually pretty low.

However, cache layouts are more complex now and sharing a worker pool across
a whole node didn't really work well for unbound workqueues. Thus, a series
of commits culminating on 8639eceb ("workqueue: Make unbound workqueues
to use per-cpu pool_workqueues") implemented more flexible affinity
mechanism for unbound workqueues which enables using e.g. last-level-cache
aligned pools. In the process, 636b927e ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues") made unbound workqueues use
per-cpu pwqs like per-cpu workqueues.

While the change was necessary to enable more flexible affinity scopes, this
came with the side effect of blowing up the effective max_active for unbound
workqueues. Before, the effective max_active for unbound workqueues was
multiplied by the number of nodes. After, by the number of CPUs.

636b927e ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") claims that this should generally be okay. It is okay for
users which self-regulates concurrency level which are the vast majority;
however, there are enough use cases which actually depend on max_active to
prevent the level of concurrency from going bonkers including several IO
handling workqueues that can issue a work item for each in-flight IO. With
targeted benchmarks, the misbehavior can easily be exposed as reported in
http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3.

Unfortunately, there is no way to express what these use cases need using
per-cpu max_active. A CPU may issue most of in-flight IOs, so we don't want
to set max_active too low but as soon as we increase max_active a bit, we
can end up with unreasonable number of in-flight work items when many CPUs
issue IOs at the same time. ie. The acceptable lowest max_active is higher
than the acceptable highest max_active.

Ideally, max_active for an unbound workqueue should be system-wide so that
the users can regulate the total level of concurrency regardless of node and
cache layout. The reasons workqueue hasn't implemented that yet are:

- One max_active enforcement decouples from pool boundaires, chaining
  execution after a work item finishes requires inter-pool operations which
  would require lock dancing, which is nasty.

- Sharing a single nr_active count across the whole system can be pretty
  expensive on NUMA machines.

- Per-pwq enforcement had been more or less okay while we were using
  per-node pools.

It looks like we no longer can avoid decoupling max_active enforcement from
pool boundaries. This patch implements system-wide nr_active mechanism with
the following design characteristics:

- To avoid sharing a single counter across multiple nodes, the configured
  max_active is split across nodes according to the proportion of each
  workqueue's online effective CPUs per node. e.g. A node with twice more
  online effective CPUs will get twice higher portion of max_active.

- Workqueue used to be able to process a chain of interdependent work items
  which is as long as max_active. We can't do this anymore as max_active is
  distributed across the nodes. Instead, a new parameter min_active is
  introduced which determines the minimum level of concurrency within a node
  regardless of how max_active distribution comes out to be.

  It is set to the smaller of max_active and WQ_DFL_MIN_ACTIVE which is 8.
  This can lead to higher effective max_weight than configured and also
  deadlocks if a workqueue was depending on being able to handle chains of
  interdependent work items that are longer than 8.

  I believe these should be fine given that the number of CPUs in each NUMA
  node is usually higher than 8 and work item chain longer than 8 is pretty
  unlikely. However, if these assumptions turn out to be wrong, we'll need
  to add an interface to adjust min_active.

- Each unbound wq has an array of struct wq_node_nr_active which tracks
  per-node nr_active. When its pwq wants to run a work item, it has to
  obtain the matching node's nr_active. If over the node's max_active, the
  pwq is queued on wq_node_nr_active->pending_pwqs. As work items finish,
  the completion path round-robins the pending pwqs activating the first
  inactive work item of each, which involves some pool lock dancing and
  kicking other pools. It's not the simplest code but doesn't look too bad.

v4: - wq_adjust_max_active() updated to invoke wq_update_node_max_active().

    - wq_adjust_max_active() is now protected by wq->mutex instead of
      wq_pool_mutex.

v3: - wq_node_max_active() used to calculate per-node max_active on the fly
      based on system-wide CPU online states. Lai pointed out that this can
      lead to skewed distributions for workqueues with restricted cpumasks.
      Update the max_active distribution to use per-workqueue effective
      online CPU counts instead of system-wide and cache the calculation
      results in node_nr_active->max.

v2: - wq->min/max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naohiro Aota <Naohiro.Aota@wdc.com>
Link: http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3
Fixes: 636b927e ("workqueue: Make unbound workqueues to use per-cpu pool_workqueues")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

Currently, for both percpu and unbound workqueues, max_active applies
per-cpu, which is a recent change for unbound workqueues. The change for
unbound workqueues was a significant departure from the previous behavior of
per-node application. It made some use cases create undesirable number of
concurrent work items and left no good way of fixing them. To address the
problem, workqueue is implementing a NUMA node segmented global nr_active
mechanism, which will be explained further in the next patch.

As a preparation, this patch introduces struct wq_node_nr_active. It's a
data structured allocated for each workqueue and NUMA node pair and
currently only tracks the workqueue's number of active work items on the
node. This is split out from the next patch to make it easier to understand
and review.

Note that there is an extra wq_node_nr_active allocated for the invalid node
nr_node_ids which is used to track nr_active for pools which don't have NUMA
node associated such as the default fallback system-wide pool.

This doesn't cause any behavior changes visible to userland yet. The next
patch will expand to implement the control mechanism on top.

v4: - Fixed out-of-bound access when freeing per-cpu workqueues.

v3: - Use flexible array for wq->node_nr_active as suggested by Lai.

v2: - wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.

    - Lai pointed out that pwq_tryinc_nr_active() incorrectly dropped
      pwq->max_active check. Restored. As the next patch replaces the
      max_active enforcement mechanism, this doesn't change the end result.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

The planned shared nr_active handling for unbound workqueues will make
pwq_dec_nr_active() sometimes drop the pool lock temporarily to acquire
other pool locks, which is necessary as retirement of an nr_active count
from one pool may need kick off an inactive work item in another pool.

This patch moves pwq_dec_nr_in_flight() call in try_to_grab_pending() to the
end of work item handling so that work item state changes stay atomic.
process_one_work() which is the other user of pwq_dec_nr_in_flight() already
calls it at the end of work item handling. Comments are added to both call
sites and pwq_dec_nr_in_flight().

This shouldn't cause any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

wq->cpu_pwq is RCU protected but wq->dfl_pwq isn't. This is okay because
currently wq->dfl_pwq is used only accessed to install it into wq->cpu_pwq
which doesn't require RCU access. However, we want to be able to access
wq->dfl_pwq under RCU in the future to access its __pod_cpumask and the code
can be made easier to read by making the two pwq fields behave in the same
way.

- Make wq->dfl_pwq RCU protected.

- Add unbound_pwq_slot() and unbound_pwq() which can access both ->dfl_pwq
  and ->cpu_pwq. The former returns the double pointer that can be used
  access and update the pwqs. The latter performs locking check and
  dereferences the double pointer.

- pwq accesses and updates are converted to use unbound_pwq[_slot]().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

wq_adjust_max_active() needs to activate work items after max_active is
increased. Previously, it did that by visiting each pwq once activating all
that could be activated. While this makes sense with per-pwq nr_active,
nr_active will be shared across multiple pwqs for unbound wqs. Then, we'd
want to round-robin through pwqs to be fairer.

In preparation, this patch makes wq_adjust_max_active() round-robin pwqs
while activating. While the activation ordering changes, this shouldn't
cause user-noticeable behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

__queue_work(), pwq_dec_nr_in_flight() and wq_adjust_max_active() were
open-coding nr_active handling, which is fine given that the operations are
trivial. However, the planned unbound nr_active update will make them more
complicated, so let's move them into helpers.

- pwq_tryinc_nr_active() is added. It increments nr_active if under
  max_active limit and return a boolean indicating whether inc was
  successful. Note that the function is structured to accommodate future
  changes. __queue_work() is updated to use the new helper.

- pwq_activate_first_inactive() is updated to use pwq_tryinc_nr_active() and
  thus no longer assumes that nr_active is under max_active and returns a
  boolean to indicate whether a work item has been activated.

- wq_adjust_max_active() no longer tests directly whether a work item can be
  activated. Instead, it's updated to use the return value of
  pwq_activate_first_inactive() to tell whether a work item has been
  activated.

- nr_active decrement and activating the first inactive work item is
  factored into pwq_dec_nr_active().

v3: - WARN_ON_ONCE(!WORK_STRUCT_INACTIVE) added to __pwq_activate_work() as
      now we're calling the function unconditionally from
      pwq_activate_first_inactive().

v2: - wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

To prepare for unbound nr_active handling improvements, move work activation
part of pwq_activate_inactive_work() into __pwq_activate_work() and add
pwq_activate_work() which tests WORK_STRUCT_INACTIVE and updates nr_active.

pwq_activate_first_inactive() and try_to_grab_pending() are updated to use
pwq_activate_work(). The latter conversion is functionally identical. For
the former, this conversion adds an unnecessary WORK_STRUCT_INACTIVE
testing. This is temporary and will be removed by the next patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

"!pwq->nr_active && list_empty(&pwq->inactive_works)" test is repeated
multiple times. Let's factor it out into pwq_is_empty().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

max_active is a workqueue-wide setting and the configured value is stored in
wq->saved_max_active; however, the effective value was stored in
pwq->max_active. While this is harmless, it makes max_active update process
more complicated and gets in the way of the planned max_active semantic
updates for unbound workqueues.

This patches moves pwq->max_active to wq->max_active. This simplifies the
code and makes freezing and noop max_active updates cheaper too. No
user-visible behavior change is intended.

As wq->max_active is updated while holding wq mutex but read without any
locking, it now uses WRITE/READ_ONCE(). A new locking locking rule WO is
added for it.

v2: wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>

workqueue is collecting different sorts of enums into a single unnamed enum
type which can increase confusion around enum width. Also, unnamed enums
can't be accessed from BPF. Let's break up enum definitions according to
their purposes and give them type names.
Signed-off-by: Tejun Heo <tj@kernel.org>

After creating a new worker, create_worker() is calling kick_pool() to wake
up the new worker task. However, as kick_pool() doesn't do anything if there
is no work pending, it also calls wake_up_process() explicitly. There's no
reason to call kick_pool() at all. wake_up_process() is enough by itself.
Drop the unnecessary kick_pool() call.
Signed-off-by: Tejun Heo <tj@kernel.org>

Since we have set the WQ_NAME_LEN to 32, decrease the name of
events_freezable_power_efficient so that it does not trip the name length
warning when the workqueue is created.
Signed-off-by: Audra Mitchell <audra@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

- Factor out wq_type_str()

- Improve formatting so that it adapts to actual field widths.

- Drop duplicate information from "Workqueue -> rescuer" section. If
  anything, we should add more rescuer-specific info - e.g. the number of
  work items rescued.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>

A customer using nohz_full has experienced the following interruption:

oslat-1004510 [018] timer_cancel:         timer=0xffff90a7ca663cf8
oslat-1004510 [018] timer_expire_entry:   timer=0xffff90a7ca663cf8 function=delayed_work_timer_fn now=4709188240 baseclk=4709188240
oslat-1004510 [018] workqueue_queue_work: work struct=0xffff90a7ca663cd8 function=fb_flashcursor workqueue=events_power_efficient req_cpu=8192 cpu=18
oslat-1004510 [018] workqueue_activate_work: work struct 0xffff90a7ca663cd8
oslat-1004510 [018] sched_wakeup:         kworker/18:1:326 [120] CPU:018
oslat-1004510 [018] timer_expire_exit:    timer=0xffff90a7ca663cf8
oslat-1004510 [018] irq_work_entry:       vector=246
oslat-1004510 [018] irq_work_exit:        vector=246
oslat-1004510 [018] tick_stop:            success=0 dependency=SCHED
oslat-1004510 [018] hrtimer_start:        hrtimer=0xffff90a70009cb00 function=tick_sched_timer/0x0 ...
oslat-1004510 [018] softirq_exit:         vec=1 [action=TIMER]
oslat-1004510 [018] softirq_entry:        vec=7 [action=SCHED]
oslat-1004510 [018] softirq_exit:         vec=7 [action=SCHED]
oslat-1004510 [018] tick_stop:            success=0 dependency=SCHED
oslat-1004510 [018] sched_switch:         oslat:1004510 [120] R ==> kworker/18:1:326 [120]
kworker/18:1-326 [018] workqueue_execute_start: work struct 0xffff90a7ca663cd8: function fb_flashcursor
kworker/18:1-326 [018] workqueue_queue_work: work struct=0xffff9078f119eed0 function=drm_fb_helper_damage_work workqueue=events req_cpu=8192 cpu=18
kworker/18:1-326 [018] workqueue_activate_work: work struct 0xffff9078f119eed0
kworker/18:1-326 [018] timer_start:          timer=0xffff90a7ca663cf8 function=delayed_work_timer_fn ...

Set wq_power_efficient to true, in case nohz_full is enabled.
This makes the power efficient workqueue be unbounded, which allows
workqueue items there to be moved to HK CPUs.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Currently the workqueue just checks the atomic and locking states after work
execution ends. However, sometimes, a work item may not unlock rcu after
acquiring rcu_read_lock(). And as a result, it would cause rcu stall, but
the rcu stall warning can not dump the work func, because the work has
finished.

In order to quickly discover those works that do not call rcu_read_unlock()
after rcu_read_lock(), add the rcu lock check.

Use rcu_preempt_depth() to check the work's rcu status. Normally, this value
is 0. If this value is bigger than 0, it means the work are still holding
rcu lock. If so, print err info and the work func.

tj: Reworded the description for clarity. Minor formatting tweak.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

At the time they are created unbound workqueues rescuers currently use
cpu_possible_mask as their affinity, but this can be too wide in case a
workqueue unbound mask has been set as a subset of cpu_possible_mask.

Make new rescuers use their associated workqueue unbound cpumask from
the start.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Retrieving rescuers information (e.g., affinity and name) is quite
useful when debugging workqueues configurations.

Add printing of such information to the existing wq_dump.py script.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Currently we limit the size of the workqueue name to 24 characters due to
commit ecf6881f ("workqueue: make workqueue->name[] fixed len")
Increase the size to 32 characters and print a warning in the event
the requested name is larger than the limit of 32 characters.
Signed-off-by: Audra Mitchell <audra@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull exfat updates from Namjae Jeon:

 - Replace the internal table lookup algorithm with the hweight library
   and ffs of the bitops library.

 - Handle the two types of stream entry, valid data size (has been
   written) and data size separately. It improves compatibility with two
   differently sized files created on Windows.

* tag 'exfat-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: do not zero the extended part
  exfat: change to get file size from DataLength
  exfat: using ffs instead of internal logic
  exfat: using hweight instead of internal logic

Pull bcachefs locking fix from Al Viro:
 "Fix broken locking in bch2_ioctl_subvolume_destroy()"

* tag 'pull-bcachefs-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  bch2_ioctl_subvolume_destroy(): fix locking
  new helper: user_path_locked_at()

Pull nfsctl update from Al Viro:
 "More simple_recursive_removal() conversions.

  nfsctl this time..."

* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nfsctl: switch to simple_recursive_removal()

Pull RCU updates from Neeraj Upadhyay:

 - Documentation and comment updates

 - RCU torture, locktorture updates that include cleanups; nolibc init
   build support for mips, ppc and rv64; testing of mid stall duration
   scenario and fixing fqs task creation conditions

 - Misc fixes, most notably restricting usage of RCU CPU stall
   notifiers, to confine their usage primarily to debug kernels

 - RCU tasks minor fixes

 - lockdep annotation fix for NMI-safe accesses, callback
   advancing/acceleration cleanup and documentation improvements

* tag 'rcu.release.v6.8' of https://github.com/neeraju/linux:
  rcu: Force quiescent states only for ongoing grace period
  doc: Clarify historical disclaimers in memory-barriers.txt
  doc: Mention address and data dependencies in rcu_dereference.rst
  doc: Clarify RCU Tasks reader/updater checklist
  rculist.h: docs: Fix wrong function summary
  Documentation: RCU: Remove repeated word in comments
  srcu: Use try-lock lockdep annotation for NMI-safe access.
  srcu: Explain why callbacks invocations can't run concurrently
  srcu: No need to advance/accelerate if no callback enqueued
  srcu: Remove superfluous callbacks advancing from srcu_gp_start()
  rcu: Remove unused macros from rcupdate.h
  rcu: Restrict access to RCU CPU stall notifiers
  rcu-tasks: Mark RCU Tasks accesses to current->rcu_tasks_idle_cpu
  rcutorture: Add fqs_holdoff check before fqs_task is created
  rcutorture: Add mid-sized stall to TREE07
  rcutorture: add nolibc init support for mips, ppc and rv64
  locktorture: Increase Hamming distance between call_rcu_chain and rcu_call_chains

Pull devicetree updates from Rob Herring:

 - Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
   to schemas

 - Improvements in Samsung GPU schemas

 - A few more cases of dropping unneeded quotes in schemas

 - Merge QCom idle-states txt binding into common idle-states schema

 - Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
   Controller

 - Add NXP i.mx8dl to SCU PD

 - Add synaptics r63353 panel controller

 - Clarify the wording around the use of 'wakeup-source' property

 - Add a DTS coding style doc

 - Add smi vendor prefix

 - Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
   tree

 - Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present

 - Fix double free in of_parse_phandle_with_args_map()

 - A couple of kerneldoc fixes

* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
  of: unittest: Fix of_count_phandle_with_args() expected value message
  dt-bindings: fpga: altera: Convert bridge bindings to yaml
  dt-bindings: fpga: Convert bridge binding to yaml
  dt-bindings: vendor-prefixes: Add smi
  dt-bindings: power: Clarify wording for wakeup-source property
  of: Fix double free in of_parse_phandle_with_args_map
  dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
  drivers: of: Fixed kernel doc warning
  dt-bindings: tpm: Document Microsoft fTPM bindings
  dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
  dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
  dt-bindings: tpm: Consolidate TCG TIS bindings
  dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
  dt-bindings: arm: Add remote etm dt-binding
  dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
  media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
  dt-bindings: display: panel: Add synaptics r63353 panel controller
  dt-bindings: arm: merge qcom,idle-state with idle-state
  dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
  dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
  ...