- 02 Feb, 2016 2 commits
-
-
Hemant Kumar authored
'perf probe' through debuginfo__find_probes() in util/probe-finder.c checks for the functions' frame descriptions in either .eh_frame section of an ELF or the .debug_frame. The check is based on whether either one of these sections is present. Depending on distro, toolchain defaults, architetcutre, build flags, etc., CFI might be found in either .eh_frame and/or .debug_frame. Sometimes, it may happen that, .eh_frame, even if present, may not be complete and may miss some descriptions. Therefore, to be sure, to find the CFI covering an address we will always have to investigate both if available. For e.g., in powerpc, this may happen: $ gcc -g bin.c -o bin $ objdump --dwarf ./bin <1><145>: Abbrev Number: 7 (DW_TAG_subprogram) <146> DW_AT_external : 1 <146> DW_AT_name : (indirect string, offset: 0x9e): main <14a> DW_AT_decl_file : 1 <14b> DW_AT_decl_line : 39 <14c> DW_AT_prototyped : 1 <14c> DW_AT_type : <0x57> <150> DW_AT_low_pc : 0x100007b8 If the .eh_frame and .debug_frame are checked for the same binary, we will find that, .eh_frame (although present) doesn't contain a description for "main" function. But, .debug_frame has a description: 000000d8 00000024 00000000 FDE cie=00000000 pc=100007b8..10000838 DW_CFA_advance_loc: 16 to 100007c8 DW_CFA_def_cfa_offset: 144 DW_CFA_offset_extended_sf: r65 at cfa+16 ... Due to this (since, perf checks whether .eh_frame is present and goes on searching for that address inside that frame), perf is unable to process the probes: # perf probe -x ./bin main Failed to get call frame on 0x100007b8 Error: Failed to add events. To avoid this issue, we need to check both the sections (.eh_frame and .debug_frame), which is done in this patch. Note that, we can always force everything into both .eh_frame and .debug_frame by: $ gcc bin.c -fasynchronous-unwind-tables -fno-dwarf2-cfi-asm -g -o bin Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Mark Wielaard <mjw@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1454426806-13974-1-git-send-email-hemant@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
intel_pt_process_auxtrace_info() creates a pt->unknown_thread thread that eventually needs to be freed by the last thread__put() on it, when its refcount hits zero, which may happen in intel_pt_process_auxtrace_info() error handling path and triggers the following segfault, which would happen as well at intel_pt_free, when tools using this intel_pt codebase frees up resources: # perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls 0 a anaconda-ks.cfg bin perf.data perf.data.old perf-f23-bringup.todo [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.217 MB perf.data ] # # perf script -F event,comm,pid,tid,time,addr,ip,sym,dso,iregs Samples for 'instructions:u' event do not have IREGS attribute set. Cannot print 'iregs' field. intel_pt_synth_events: failed to synthesize 'instructions' event type Segmentation fault (core dumped) # The problem is: there's a union in 'struct thread' combines a list_head and a rb_node. The standard life cycle of a thread is: init rb_node in the constructor, insert it into machine->threads rbtree using rb_node, move it to machine->dead_threads using list_head, clean in the last thread__put: list_del_init(&thread->node). In the above command, it clean a thread before adding it into list, causes the above segfault. Since pt->unknown_thread will never live in an rbtree, initialize its list node so that when list_del_init() is done on it we don't segfault. After this patch: # perf script -F event,comm,pid,tid,time,addr,ip,sym,dso,iregs Samples for 'instructions:u' event do not have IREGS attribute set. Cannot print 'iregs' field. intel_pt_synth_events: failed to synthesize 'instructions' event type 0x248 [0x88]: failed to process type: 70 # Reported-by: Tong Zhang <ztong@vt.edu> Reported-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Link: http://lkml.kernel.org/r/1454296865-19749-1-git-send-email-wangnan0@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 Feb, 2016 1 commit
-
-
Adrian Hunter authored
Fixes segmentation fault using, for instance: (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64 [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 (gdb) bt #0 0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 #1 0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:433 #2 0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:498 #3 0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:936 #4 0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391 #5 0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361 #6 0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401 #7 0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253 #8 0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364 #9 0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664 #10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539 #11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264 #12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390 #13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451 #14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495 #15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618 (gdb) Intel PT attempts to find the sched:sched_switch tracepoint but that seg faults if tracefs is not readable, because the error reporting structure is null, as errors are not reported when automatically adding tracepoints. Fix by checking before using. Committer note: This doesn't take place in a kernel that supports perf_event_attr.context_switch, that is the default way that will be used for tracking context switches, only in older kernels, like 4.2, in a machine with Intel PT (e.g. Broadwell) for non-priviledged users. Further info from a similar patch by Wang: The error is in tracepoint_error: it assumes the 'e' parameter is valid. However, there are many situation a parse_event() can be called without parse_events_error. See result of $ grep 'parse_events(.*NULL)' ./tools/perf/ -r' Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Tong Zhang <ztong@vt.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: 19658171 ("perf tools: Enhance parsing events tracepoint error output") Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 Jan, 2016 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix 'perf stat' stddev reporting due to mistakenly cleaning event private stats (Jiri Olsa) - Fix 'perf test CQM' endless loop detected by 'gcc6 -Wmisleading-indentation' (Markus Trippelsdorf) - Fix behaviour of Shift-Tab when nothing is focussed in the annotate TUI browser, detected with gcc6 -Wmisleading-indentation (Markus Trippelsdorf) - Fix mem data cacheline hists browser width setting for unresolved addresses (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 29 Jan, 2016 13 commits
-
-
Peter Zijlstra authored
Now that the perf_event_ctx_lock_nested() call has moved from put_event() into perf_event_release_kernel() the first reason is no longer valid as that can no longer happen. The second reason seems to have been invalidated when Al Viro made fput() unconditionally async in the following commit: 4a9d4b02 ("switch fput to task_work_add") such that munmap()->fput()->release()->perf_release() would no longer happen. Therefore, remove the annotation. This should increase the efficiency of lockdep coverage of perf locking. Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
The orphan cleanup workqueue doesn't always catch orphans, for example, if they never schedule after they are orphaned. IOW, the event leak is still very real. It also wouldn't work for kernel counters. Doing it synchonously is a little hairy due to lock inversion issues, but is made to work. Patch based on work by Alexander Shishkin. Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There are two concepts of owner wrt an event and they are conflated: - event::owner / event::owner_list, used by prctl(.option = PR_TASK_PERF_EVENTS_{EN,DIS}ABLE). - the 'owner' of the event object, typically the file descriptor. Currently these two concepts are conflated, which gives trouble with scm_rights passing of file descriptors. Passing the event and then closing the creating task would render the event 'orphan' and would have it cleared out. Unlikely what is expectd. This patch untangles these two concepts by using PERF_EVENT_STATE_EXIT to denote the second type. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
In preparation to adding more options, convert the boolean argument into a flags word. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
sync_child_event() has outgrown its purpose, it does far too much. Bring it back to its named purpose. Rename __perf_event_exit_task() to perf_event_exit_event() to better reflect what it does and move the event->state assignment under the ctx->lock, like state changes ought to be. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Use smp_store_release() to clear event->owner and lockless_dereference() to observe it. Further use READ_ONCE() for all lockless reads. This changes perf_remove_from_owner() to leave event->owner cleared. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
We should never attempt to enable a STATE_EXIT event. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Update the locking order to note that ctx::lock nests inside of child_mutex, as per: perf_ioctl(): ctx::mutex -> perf_event_for_each(): event::child_mutex -> _perf_event_enable(): ctx::lock Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There is but a single caller, remove the function - we already have _free_event(), the extra indirection is nonsensical.. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Alexei Starovoitov authored
Robustify refcounting. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160126045947.GA40151@ast-mbp.thefacebook.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Dan reported: 1229 if (ctx->task == TASK_TOMBSTONE || 1230 !atomic_inc_not_zero(&ctx->refcount)) { 1231 raw_spin_unlock(&ctx->lock); 1232 ctx = NULL; ^^^^^^^^^^ ctx is NULL. 1233 } 1234 1235 WARN_ON_ONCE(ctx->task != task); ^^^^^^^^^^^^^^^^^ The patch adds a NULL dereference. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 63b6da39 ("perf: Fix perf_event_exit_task() race") Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Get rid of the 'onln' obfuscation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
When calling intel_alt_er() with .idx != EXTRA_REG_RSP_* we will not initialize alt_idx and then use this uninitialized value to index an array. When that is not fatal, it can result in an infinite loop in its caller __intel_shared_reg_get_constraints(), with IRQs disabled. Alternative error modes are random memory corruption due to the cpuc->shared_regs->regs[] array overrun, which manifest in either get_constraints or put_constraints doing weird stuff. Only took 6 hours of painful debugging to find this. Neither GCC nor Smatch warnings flagged this bug. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: ae3f011f ("perf/x86/intel: Fix SLM MSR_OFFCORE_RSP1 valid_mask") Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 28 Jan, 2016 2 commits
-
-
Peter Zijlstra authored
There is a race between perf_event_exit_task_context() and orphans_remove_work() which results in a use-after-free. We mark ctx->task with TASK_TOMBSTONE to indicate a context is 'dead', under ctx->lock. After which point event_function_call() on any event of that context will NOP A concurrent orphans_remove_work() will only hold ctx->mutex for the list iteration and not serialize against this. Therefore its possible that orphans_remove_work()'s perf_remove_from_context() call will fail, but we'll continue to free the event, with the result of free'd memory still being on lists and everything. Once perf_event_exit_task_context() gets around to acquiring ctx->mutex it too will iterate the event list, encounter the already free'd event and proceed to free it _again_. This fails with the WARN in free_event(). Plug the race by having perf_event_exit_task_context() hold ctx::mutex over the whole tear-down, thereby 'naturally' serializing against all other sites, including the orphan work. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: alexander.shishkin@linux.intel.com Cc: dsahern@gmail.com Cc: namhyung@kernel.org Link: http://lkml.kernel.org/r/20160125130954.GY6357@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
We should set event->owner before we install the event, otherwise there is a hole where the target task can fork() and we'll not inherit the event because it thinks the event is orphaned. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 26 Jan, 2016 4 commits
-
-
Jiri Olsa authored
Mel reported stddev reporting was broken due to following commit: 106a94a0 ("perf stat: Introduce read_counters function") This commit merged interval and overall counters reading into single read_counters function. The old interval code cleaned the stddev data for some reason (it's never displayed in interval mode) and the mentioned commit kept on cleaning the stddev data in merged function, which resulted in the stddev not being displayed. Removing the wrong stddev data cleanup init_stats call. Reported-and-Tested-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@vger.kernel.org # v4.2+ Fixes: 106a94a0 ("perf stat: Introduce read_counters function") Link: http://lkml.kernel.org/r/1453290995-18485-4-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Set correct width for unresolved mem_dcacheline addr. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 9b32ba71 ("perf tools: Add dcacheline sort") Link: http://lkml.kernel.org/r/1453290995-18485-3-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Markus Trippelsdorf authored
The issue was pointed out by gcc-6's -Wmisleading-indentation. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: c97cf422 ("perf top: Live TUI Annotation") Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Markus Trippelsdorf authored
The while loop was spinning. Fix by removing a semicolon. The issue was pointed out by gcc-6's -Wmisleading-indentation. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 035827e9 ("perf tests: Add Intel CQM test") Link: http://lkml.kernel.org/r/20151214154335.GA1409@x4Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 Jan, 2016 16 commits
-
-
Alexander Shishkin authored
We are currently using asynchronous deallocation in the error path in AUX mmap code, which is unnecessary and also presents a problem for users that wish to probe for the biggest possible buffer size they can get: they'll get -EINVAL on all subsequent attemts to allocate a smaller buffer before the asynchronous deallocation callback frees up the pages from the previous unsuccessful attempt. Currently, gdb does that for allocating AUX buffers for Intel PT traces. More specifically, overwrite mode of AUX pmus that don't support hardware sg (some implementations of Intel PT, for instance) is limited to only one contiguous high order allocation for its buffer and there is no way of knowing its size without trying. This patch changes error path freeing to be synchronous as there won't be any contenders for the AUX pages at that point. Reported-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1453216469-9509-1-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Stephane Eranian authored
This patch enables the uncore_imc PMU for Intel SkyLake Desktop processors (Core i7-6700, model 94). It is possible to compute memory read/write bandwidth using: $ perf stat -a -e uncore_imc/data_reads/,uncore_imc/data_writes/ .... Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1452151546-8853-1-git-send-email-eranian@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There is a race against perf_event_exit_task() vs event_function_call(),find_get_context(),perf_install_in_context() (iow, everyone). Since there is no permanent marker on a context that its dead, it is quite possible that we access (and even modify) a context after its passed through perf_event_exit_task(). For instance, find_get_context() might find the context still installed, but by the time we get to perf_install_in_context() it might already have passed through perf_event_exit_task() and be considered dead, we will however still add the event to it. Solve this by marking a ctx dead by setting its ctx->task value to -1, it must be !0 so we still know its a (former) task context. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Try to trigger warnings before races do damage. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There is one common bug left in all the event_function_call() users, between loading ctx->task and getting to the remote_function(), ctx->task can already have been changed. Therefore we need to double check and retry if ctx->task != current. Insert another trampoline specific to event_function_call() that checks for this and further validates state. This also allows getting rid of the active/inactive functions. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
The perf_remove_from_context() usage in __perf_event_exit_task() is different from the other usages in that this site has already detached and scheduled out the task context. This will stand in the way of stronger assertions checking the (task) context scheduling invariants. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There is a very nasty problem wrt disabling the perf task scheduling hooks. Currently we {set,clear} ctx->is_active on every __perf_event_task_sched_{in,out}, _however_ this means that if we disable these calls we'll have task contexts with ->is_active set that are not active and 'active' task contexts without ->is_active set. This can result in event_function_call() looping on the ctx->is_active condition basically indefinitely. Resolve this by changing things such that contexts without events do not set ->is_active like we used to. From this invariant it trivially follows that if there are no (task) events, every task ctx is inactive and disabling the context switch hooks is harmless. This leaves two places that need attention (and already had accumulated weird and wonderful hacks to work around, without recognising this actual problem). Namely: - perf_install_in_context() will need to deal with installing events in an inactive context, meaning it cannot rely on ctx-is_active for its IPIs. - perf_remove_from_context() will have to mark a context as inactive when it removes the last event. For specific detail, see the patch/comments. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
For no apparent reason and to great confusion the rules for ctx->is_active and cpuctx->task_ctx are different. This means that its not always possible to find all active (task) contexts. Fix this such that if ctx->is_active gets set, we also set (or verify) cpuctx->task_ctx. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
It doesn't make sense to take up-to _4_ references on perf_sched_events() per event, avoid doing this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Like perf_enable_on_exec(), perf_event_enable() event scheduling has problems respecting the context hierarchy when trying to schedule events (for example, it will try and add a pinned event without first removing existing flexible events). So simplify it by using the new ctx_resched() call which will DTRT. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
We have a function that does exactly what we want here, use it. This reduces the amount of cpuctx->task_ctx muckery. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There are two problems with the current perf_enable_on_exec() event scheduling: - the newly enabled events will be immediately scheduled irrespective of their ctx event list order. - there's a hole in the ctx->lock between scheduling the events out and putting them back on. Esp. the latter issue is a real problem because a hole in event scheduling leaves the thing in an observable inconsistent state, confusing things. Fix both issues by first doing the enable iteration and at the end, when there are newly enabled events, reschedule the ctx in one go. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
The comment here is horribly out of date, remove it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There is a comment that states that perf_event_context_sched_in() will also switch in the cgroup events, I cannot find it does so. Therefore all the resulting logic goes out the window too. Clean that up. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There appears to be a problem in __perf_event_task_sched_in() wrt cgroup event scheduling. The normal event scheduling order is: CPU pinned Task pinned CPU flexible Task flexible And since perf_cgroup_sched*() only schedules the cpu context, we must call this _before_ adding the task events. Note: double check what happens on the ctx switch optimization where the task ctx isn't scheduled. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Make various bugs easier to see. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
- 19 Jan, 2016 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf tools improvements and fixes from Arnaldo Carvalho de Melo: User visible bug fixes: - Fix reading of build-id from vDSO (Ben Hutchings) - Fix processing samples for guests, noticed with 'perf kvm', but noticeable as well via other tools, such as 'perf top' (Ravi Bangoria) Build infrastructure: - Add feature-dump target and FEATURES_DUMP make variable, to allow reusing the feature detection results among multiple tools/ living codebases, such as perf and lib/bpf (Jiri Olsa) - 'make -C tools/perf build-test' improvements, making it more paralelizable and allowing building it outside of the source tree, using O= (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-