- 23 Nov, 2020 2 commits
-
-
Maxime Ripard authored
The current HVS muxing code will consider the CRTCs in a given state to setup their muxing in the HVS, and disable the other CRTCs muxes. However, it's valid to only update a single CRTC with a state, and in this situation we would mux out a CRTC that was enabled but left untouched by the new state. Fix this by setting a flag on the CRTC state when the muxing has been changed, and only change the muxing configuration when that flag is there. Fixes: 87ebcd42 ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Tested-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-3-maxime@cerno.tech
-
Maxime Ripard authored
If a CRTC is enabled but not active, and that we're then doing a page flip on another CRTC, drm_atomic_get_crtc_state will bring the first CRTC state into the global state, and will make us wait for its vblank as well, even though that might never occur. Instead of creating the list of the free channels each time atomic_check is called, and calling drm_atomic_get_crtc_state to retrieve the allocated channels, let's create a private state object in the main atomic state, and use it to store the available channels. Since vc4 has a semaphore (with a value of 1, so a lock) in its commit implementation to serialize all the commits, even the nonblocking ones, we are free from the use-after-free race if two subsequent commits are not ran in their submission order. Fixes: 87ebcd42 ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by:
-
- 19 Nov, 2020 10 commits
-
-
Maxime Ripard authored
There's cross-talk on the RPi4 between the 2.4GHz channels used by the WiFi chip and some resolutions, most notably 1440p at 60Hz. In such a case, we can either reject entirely the mode, or lower slightly the pixel frequency to remove the overlap. Let's go for the latter. Signed-off-by:
-
Maxime Ripard authored
The RaspberryPi4 has both a WiFi chip and HDMI outputs capable of doing 4k. Unfortunately, the 1440p resolution at 60Hz has a TMDS rate on the HDMI cable right in the middle of the first Wifi channel. Add a property to our HDMI controller, that could be reused by other similar HDMI controllers, to allow the OS to take whatever measure is necessary to avoid that crosstalk. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201029134018.1948636-1-maxime@cerno.tech
-
Maxime Ripard authored
We've had a number of muxing corner-cases with specific ways to reproduce them, so let's document them to make sure they aren't lost and introduce regressions later on. Signed-off-by:
-
Maxime Ripard authored
The code that assigns HVS channels during atomic_check is starting to grow a bit big, let's move it into a separate function. Signed-off-by:
-
Maxime Ripard authored
The NUM_CHANNELS define has a pretty generic name and was right before the function using it. Let's move to something that makes the hardware-specific nature more obvious, and to a more appropriate place. Signed-off-by:
-
Maxime Ripard authored
NUM_OUTPUTS isn't used anymore, let's remove it. Signed-off-by:
-
Maxime Ripard authored
Even though it was pointed in the review by Daniel, and I thought to have fixed it while applying the patches, but it turns out I forgot to commit the fixes in the process. Properly fix it this time. Fixes: dcda7c28 ("drm/vc4: kms: Add functions to create the state objects") Signed-off-by:
-
Maxime Ripard authored
The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels per clock cycle, and cannot deal with odd timings. Let's reject any mode with such timings. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-2-maxime@cerno.tech
-
Maxime Ripard authored
The HDMI controller cannot go above a certain pixel rate limit depending on the generations, but that limit is only enforced in mode_valid at the moment, which means that we won't advertise modes that exceed that limit, but the userspace is still free to try to setup a mode that would. Implement atomic_check to make sure we check it in that scenario too. Signed-off-by:
-
Maxime Ripard authored
Merge tag 'drm/sun4i-dma-fix-pull-request' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-misc-fixes Fix for drm/sun4i shared with arm-soc This patch is a preliminary fix that will conflict with subsequent work merged through arm-soc. Signed-off-by:
-
- 18 Nov, 2020 1 commit
-
-
Maxime Ripard authored
Commit e0d07278 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") introduced a regression in our code since the second backed to probe will now get -EINVAL back from dma_direct_set_offset and will prevent the entire DRM device from probing. Ignore -EINVAL as a temporary measure to get it back working, before removing that call entirely. Fixes: e0d07278 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 17 Nov, 2020 1 commit
-
-
Xiongfeng Wang authored
Fix to return a negative error code from the error handling case instead of 0 in function sun8i_dw_hdmi_bind(). Fixes: b7c7436a ("drm/sun4i: Implement A83T HDMI driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
- 12 Nov, 2020 1 commit
-
-
Jonathan Liu authored
It has been observed that resetting force in the detect function can result in the PHY being powered down in response to hot-plug detect being asserted, even when the HDMI connector is forced on. Enabling debug messages and adding a call to dump_stack() in dw_hdmi_phy_power_off() shows the following in dmesg: [ 160.637413] dwhdmi-rockchip ff940000.hdmi: EVENT=plugin [ 160.637433] dwhdmi-rockchip ff940000.hdmi: PHY powered down in 0 iterations Call trace: dw_hdmi_phy_power_off dw_hdmi_phy_disable dw_hdmi_update_power dw_hdmi_detect dw_hdmi_connector_detect drm_helper_probe_detect_ctx drm_helper_hpd_irq_event dw_hdmi_irq irq_thread_fn irq_thread kthread ret_from_fork Fixes: 381f05a7 ("drm: bridge/dw_hdmi: add connector mode forcing") Signed-off-by:
Jonathan Liu <net147@gmail.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
- 10 Nov, 2020 1 commit
-
-
Linus Walleij authored
Since we now turn off the EPOD regulator to reset the hardware, we need to balance the regulators after that point. If registering the master fails we only need to disable one regulator. Fix this by open-coding this leg of the error path. Fixes: c4842d4d ("drm/mcde: Fix display pipeline restart") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
- 09 Nov, 2020 2 commits
-
-
Thomas Zimmermann authored
The gma500 driver expects 3 pipelines in several it's IRQ functions. Accessing struct drm_device.vblank[], this fails with devices that only have 2 pipelines. An example KASAN report is shown below. [ 62.267688] ================================================================== [ 62.268856] BUG: KASAN: slab-out-of-bounds in psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.269450] Read of size 1 at addr ffff8880012bc6d0 by task systemd-udevd/285 [ 62.269949] [ 62.270192] CPU: 0 PID: 285 Comm: systemd-udevd Tainted: G E 5.10.0-rc1-1-default+ #572 [ 62.270807] Hardware name: /DN2800MT, BIOS MTCDT10N.86A.0164.2012.1213.1024 12/13/2012 [ 62.271366] Call Trace: [ 62.271705] dump_stack+0xae/0xe5 [ 62.272180] print_address_description.constprop.0+0x17/0xf0 [ 62.272987] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.273474] __kasan_report.cold+0x20/0x38 [ 62.273989] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.274460] kasan_report+0x3a/0x50 [ 62.274891] psb_irq_postinstall+0x250/0x3c0 [gma500_gfx] [ 62.275380] drm_irq_install+0x131/0x1f0 <...> [ 62.300751] Allocated by task 285: [ 62.301223] kasan_save_stack+0x1b/0x40 [ 62.301731] __kasan_kmalloc.constprop.0+0xbf/0xd0 [ 62.302293] drmm_kmalloc+0x55/0x100 [ 62.302773] drm_vblank_init+0x77/0x210 Resolve the issue by only handling vblank entries up to the number of CRTCs. I'm adding a Fixes tag for reference, although the bug has been present since the driver's initial commit. Signed-off-by:
-
Olaf Hering authored
hvfb_getmem uses vzalloc, therefore vmalloc.h should be included. Fixes commit d21987d7 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver") Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
- 08 Nov, 2020 1 commit
-
-
Nishanth Menon authored
With the integration of chip-id detection scheme in kernel[1], there is no specific need to maintain multitudes of SoC specific config options, discussed as per [2], we have deprecated the usage in other places for v5.10-rc1. Fix the missing user so that we can clean up the configs in v5.11. [1] drivers/soc/ti/k3-socinfo.c commit 907a2b7e ("soc: ti: add k3 platforms chipid module driver") [2] https://lore.kernel.org/linux-arm-kernel/20200908112534.t5bgrjf7y3a6l2ss@akan/ Fixes: afba7e6c ("drm: bridge: cdns-mhdp8546: Add TI J721E wrapper") Cc: Swapnil Jakhade <sjakhade@cadence.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Yuti Amonkar <yamonkar@cadence.com> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
- 03 Nov, 2020 4 commits
-
-
Lee Jones authored
Commit 6735b463 ("Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts") introduced the following error when building rpc_defconfig (only this build appears to be affected): `acorndata_8x8' referenced in section `.text' of arch/arm/boot/compressed/ll_char_wr.o: defined in discarded section `.data' of arch/arm/boot/compressed/font.o `acorndata_8x8' referenced in section `.data.rel.ro' of arch/arm/boot/compressed/font.o: defined in discarded section `.data' of arch/arm/boot/compressed/font.o make[3]: *** [/scratch/linux/arch/arm/boot/compressed/Makefile:191: arch/arm/boot/compressed/vmlinux] Error 1 make[2]: *** [/scratch/linux/arch/arm/boot/Makefile:61: arch/arm/boot/compressed/vmlinux] Error 2 make[1]: *** [/scratch/linux/arch/arm/Makefile:317: zImage] Error 2 The .data section is discarded at link time. Reinstating acorndata_8x8 as const ensures it is still available after linking. Do the same for the other 12 built-in fonts as well, for consistency purposes. Cc: <stable@vger.kernel.org> Cc: Russell King <linux@armlinux.org.uk> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 6735b463 ("Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts") Signed-off-by:
Lee Jones <lee.jones@linaro.org> Co-developed-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
-
Maxime Ripard authored
The commit dcda7c28 ("drm/vc4: kms: Add functions to create the state objects") removed the last users of the vc4 variable, but didn't remove that variable resulting in a warning. Fixes: dcda7c28 ("drm/vc4: kms: Add functions to create the state objects") Reported-by:
-
Steven Price authored
When unloading the call to pm_runtime_put_sync_suspend() will attempt to turn the GPU cores off, however panfrost_device_fini() will have turned the clocks off. This leads to the hardware locking up. Instead don't call pm_runtime_put_sync_suspend() and instead simply mark the device as suspended using pm_runtime_set_suspended(). And also include this on the error path in panfrost_probe(). Fixes: aebe8c22 ("drm/panfrost: Fix possible suspend in panfrost_remove") Signed-off-by:
Steven Price <steven.price@arm.com> Reviewed-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201030145833.29006-1-steven.price@arm.com
-
Boris Brezillon authored
panfrost_ioctl_madvise() and panfrost_gem_purge() acquire the mappings and shmem locks in different orders, thus leading to a potential the mappings lock first. Fixes: bdefca2d ("drm/panfrost: Add the panfrost_gem_mapping concept") Cc: <stable@vger.kernel.org> Cc: Christian Hewitt <christianshewitt@gmail.com> Reported-by:
Christian Hewitt <christianshewitt@gmail.com> Signed-off-by:
-
- 02 Nov, 2020 6 commits
-
-
Maxime Ripard authored
In order to make the vc4_kms_load code and error path a bit easier to read and extend, add functions to create state objects, and use managed actions to cleanup if needed. Signed-off-by:
-
Maxime Ripard authored
We can simplify a bit the bind code, its error path and unbind by using the managed devm_drm_dev_alloc function. Acked-by:
-
Maxime Ripard authored
We have a helper to retrieve the vc4_dev structure from the drm_device one when needed, so let's use it consistently. Acked-by:
-
Maxime Ripard authored
The job queue needs to be cleaned up using vc4_gem_destroy, but it's not used consistently (vc4_drv's bind calls it in its error path, but doesn't in unbind), and we can make that automatic through a managed action. Let's remove the requirement to call vc4_gem_destroy. Fixes: d5b1a78a ("drm/vc4: Add support for drawing 3D frames.") Acked-by:
-
Maxime Ripard authored
Using drmm_mode_config_init instead of drm_mode_config_init allows us to cleanup a bit the error path. Signed-off-by:
-
Maxime Ripard authored
The BO cache needs to be cleaned up using vc4_bo_cache_destroy, but it's not used consistently (vc4_drv's bind calls it in its error path, but doesn't in unbind), and we can make that automatic through a managed action. Let's remove the requirement to call vc4_bo_cache_destroy. Fixes: c826a6e1 ("drm/vc4: Add a BO cache.") Acked-by:
-
- 01 Nov, 2020 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Three fixes all related to #DB: - Handle the BTF bit correctly so it doesn't get lost due to a kernel #DB - Only clear and set the virtual DR6 value used by ptrace on user space triggered #DB. A kernel #DB must leave it alone to ensure data consistency for ptrace. - Make the bitmasking of the virtual DR6 storage correct so it does not lose DR_STEP" * tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6) x86/debug: Only clear/set ->virtual_dr6 for userspace #DB x86/debug: Fix BTF handling -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A few fixes for timers/timekeeping: - Prevent undefined behaviour in the timespec64_to_ns() conversion which is used for converting user supplied time input to nanoseconds. It lacked overflow protection. - Mark sched_clock_read_begin/retry() to prevent recursion in the tracer - Remove unused debug functions in the hrtimer and timerlist code" * tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Prevent undefined behaviour in timespec64_to_ns() timers: Remove unused inline funtion debug_timer_free() hrtimer: Remove unused inline function debug_hrtimer_free() time/sched_clock: Mark sched_clock_read_begin/retry() as notrace -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp fix from Thomas Gleixner: "A single fix for stop machine. Mark functions no trace to prevent a crash caused by recursion when enabling or disabling a tracer on RISC-V (probably all architectures which patch through stop machine)" * tag 'smp-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stop_machine, rcu: Mark functions as notrace
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A couple of locking fixes: - Fix incorrect failure injection handling in the fuxtex code - Prevent a preemption warning in lockdep when tracking local_irq_enable() and interrupts are already enabled - Remove more raw_cpu_read() usage from lockdep which causes state corruption on !X86 architectures. - Make the nr_unused_locks accounting in lockdep correct again" * tag 'locking-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix nr_unused_locks accounting locking/lockdep: Remove more raw_cpu_read() usage futex: Fix incorrect should_fail_futex() handling lockdep: Fix preemption WARN for spurious IRQ-enable -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes/removals from Greg KH: "Here's some small fixes for 5.10-rc2 and a big driver removal. The fixes are for some reported issues in the interconnect and coresight drivers, nothing major. The "big" driver removal is the MIC drivers have been asked to be removed as the hardware never shipped and Intel no longer wants to maintain something that no one can use. This is welcomed by many as the DMA usage of these drivers was "interesting" and the security people were starting to question some issues that were starting to be found in the codebase. Note, one of the subsystems for this driver, the "VOP" code, will probably come back in future kernel versions as it was looking to potentially solve some PCIe virtualization issues that a number of other vendors were wanting to solve. But as-is, this codebase didn't work for anyone else so no actual functionality is being removed. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: coresight: cti: Initialize dynamic sysfs attributes coresight: Fix uninitialised pointer bug in etm_setup_aux() coresight: add module license misc: mic: remove the MIC drivers interconnect: qcom: use icc_sync state for sm8[12]50 interconnect: qcom: Ensure that the floor bandwidth value is enforced interconnect: qcom: sc7180: Init BCMs before creating the nodes interconnect: qcom: sdm845: Init BCMs before creating the nodes interconnect: Aggregate before setting initial bandwidth interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
-
Linus Torvalds authored
Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and documentation fixes from Greg KH: "Here is one tiny debugfs change to fix up an API where the last user was successfully fixed up in 5.10-rc1 (so it couldn't be merged earlier), and a much larger Documentation/ABI/ update to the files so they can be automatically parsed by our tools. The Documentation/ABI/ updates are just formatting issues, small ones to bring the files into parsable format, and have been acked by numerous subsystem maintainers and the documentation maintainer. I figured it was good to get this into 5.10-rc2 to help wih the merge issues that would arise if these were to stick in linux-next until 5.11-rc1. The debugfs change has been in linux-next for a long time, and the Documentation updates only for the last linux-next release" * tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits) scripts: get_abi.pl: assume ReST format by default docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication docs: ABI: sysfs-class-backlight: unify ABI documentation docs: ABI: sysfs-c2port: remove a duplicated entry docs: ABI: sysfs-class-power: unify duplicated properties docs: ABI: unify /sys/class/leds/<led>/brightness documentation docs: ABI: stable: remove a duplicated documentation docs: ABI: change read/write attributes docs: ABI: cleanup several ABI documents docs: ABI: sysfs-bus-nvdimm: use the right format for ABI docs: ABI: vdso: use the right format for ABI docs: ABI: fix syntax to be parsed using ReST notation docs: ABI: convert testing/configfs-acpi to ReST docs: Kconfig/Makefile: add a check for broken ABI files docs: abi-testing.rst: enable --rst-sources when building docs docs: ABI: don't escape ReST-incompatible chars from obsolete and removed docs: ABI: create a 2-depth index for ABI docs: ABI: make it parse ABI/stable as ReST-compatible files docs: ABI: sysfs-uevent: make it compatible with ReST output docs: ABI: testing: make the files compatible with ReST output ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for issues that have been reported in 5.10-rc1: - octeon driver fixes - wfx driver fixes - memory leak fix in vchiq driver - fieldbus driver bugfix - comedi driver bugfix All of these have been in linux-next with no reported issues" * tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fieldbus: anybuss: jump to correct label in an error path staging: wfx: fix test on return value of gpiod_get_value() staging: wfx: fix use of uninitialized pointer staging: mmal-vchiq: Fix memory leak for vchiq_instance staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice staging: octeon: Drop on uncorrectable alignment or FCS error staging: octeon: repair "fixed-link" support
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes for reported issues for 5.10-rc2. They include: - vt ioctl bugfix for reported problems - fsl_lpuart serial driver fix - 21285 serial driver bugfix All have been in linux-next with no reported issues" * tag 'tty-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt_ioctl: fix GIO_UNIMAP regression vt: keyboard, extend func_buf_lock to readers vt: keyboard, simplify vt_kdgkbsent tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A tty: serial: 21285: fix lockup on open
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB driver fixes from Greg KH: "Here are a number of small bugfixes for reported issues in some USB drivers. They include: - typec bugfixes - xhci bugfixes and lockdep warning fixes - cdc-acm driver regression fix - kernel doc fixes - cdns3 driver bugfixes for a bunch of reported issues - other tiny USB driver fixes All have been in linux-next with no reported issues" * tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdns3: gadget: own the lock wrongly at the suspend routine usb: cdns3: Fix on-chip memory overflow issue usb: cdns3: gadget: suspicious implicit sign extension xhci: Don't create stream debugfs files with spinlock held. usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC xhci: Fix sizeof() mismatch usb: typec: stusb160x: fix signedness comparison issue with enum variables usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x USB: apple-mfi-fastcharge: don't probe unhandled devices usbcore: Check both id_table and match() when both available usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe() usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe usb: typec: tcpm: reset hard_reset_count for any disconnect usb: cdc-acm: fix cooldown mechanism usb: host: fsl-mph-dr-of: check return of dma_set_mask() usb: fix kernel-doc markups usb: typec: stusb160x: fix some signedness bugs usb: cdns3: Variable 'length' set but not used
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - selftest fix - force PTE mapping on device pages provided via VFIO - fix detection of cacheable mapping at S2 - fallback to PMD/PTE mappings for composite huge pages - fix accounting of Stage-2 PGD allocation - fix AArch32 handling of some of the debug registers - simplify host HYP entry - fix stray pointer conversion on nVHE TLB invalidation - fix initialization of the nVHE code - simplify handling of capabilities exposed to HYP - nuke VCPUs caught using a forbidden AArch32 EL0 x86: - new nested virtualization selftest - miscellaneous fixes - make W=1 fixes - reserve new CPUID bit in the KVM leaves" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: vmx: remove unused variable KVM: selftests: Don't require THP to run tests KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again KVM: selftests: test behavior of unmapped L2 APIC-access address KVM: x86: Fix NULL dereference at kvm_msr_ignored_check() KVM: x86: replace static const variables with macros KVM: arm64: Handle Asymmetric AArch32 systems arm64: cpufeature: upgrade hyp caps to final arm64: cpufeature: reorder cpus_have_{const, final}_cap() KVM: arm64: Factor out is_{vhe,nvhe}_hyp_code() KVM: arm64: Force PTE mapping on fault resulting in a device mapping KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes KVM: arm64: Fix masks in stage2_pte_cacheable() KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCR KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transition KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidation KVM: arm64: Don't corrupt tpidr_el2 on failed HVC call x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID
-
