- 15 Jul, 2022 5 commits
-
-
Kuniyuki Iwashima authored
While reading sysctl_ip_nonlocal_bind, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
While reading sysctl_ip_fwd_update_priority, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 432e05d3 ("net: ipv4: Control SKB reprioritization after forwarding") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_fwd_use_pmtu, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: f87c10a8 ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_no_pmtu_disc, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_ip_default_ttl, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
- 14 Jul, 2022 27 commits
-
-
Nathan Chancellor authored
Clang warns: arch/x86/kernel/cpu/bugs.c:58:21: error: section attribute is specified on redeclared variable [-Werror,-Wsection] DEFINE_PER_CPU(u64, x86_spec_ctrl_current); ^ arch/x86/include/asm/nospec-branch.h:283:12: note: previous declaration is here extern u64 x86_spec_ctrl_current; ^ 1 error generated. The declaration should be using DECLARE_PER_CPU instead so all attributes stay in sync. Cc: stable@vger.kernel.org Fixes: fc02735b ("KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bpf and wireless. Still no major regressions, the release continues to be calm. An uptick of fixes this time around due to trivial data race fixes and patches flowing down from subtrees. There has been a few driver fixes (particularly a few fixes for false positives due to 66e4c8d9 which went into -next in May!) that make me worry the wide testing is not exactly fully through. So "calm" but not "let's just cut the final ASAP" vibes over here. Current release - regressions: - wifi: rtw88: fix write to const table of channel parameters Current release - new code bugs: - mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify - mlx5: - TC, allow offload from uplink to other PF's VF - Lag, decouple FDB selection and shared FDB - Lag, correct get the port select mode str - bnxt_en: fix and simplify XDP transmit path - r8152: fix accessing unset transport header Previous releases - regressions: - conntrack: fix crash due to confirmed bit load reordering (after atomic -> refcount conversion) - stmmac: dwc-qos: disable split header for Tegra194 Previous releases - always broken: - mlx5e: ring the TX doorbell on DMA errors - bpf: make sure mac_header was set before using it - mac80211: do not wake queues on a vif that is being stopped - mac80211: fix queue selection for mesh/OCB interfaces - ip: fix dflt addr selection for connected nexthop - seg6: fix skb checksums for SRH encapsulation/insertion - xdp: fix spurious packet loss in generic XDP TX path - bunch of sysctl data race fixes - nf_log: incorrect offset to network header Misc: - bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs" * tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) nfp: flower: configure tunnel neighbour on cmsg rx net/tls: Check for errors in tls_device_init MAINTAINERS: Add an additional maintainer to the AMD XGBE driver xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue selftests/net: test nexthop without gw ip: fix dflt addr selection for connected nexthop net: atlantic: remove aq_nic_deinit() when resume net: atlantic: remove deep parameter on suspend/resume functions sfc: fix kernel panic when creating VF seg6: bpf: fix skb checksum in bpf_push_seg6_encap() seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors seg6: fix skb checksum evaluation in SRH encapsulation/insertion sfc: fix use after free when disabling sriov net: sunhme: output link status with a single print. r8152: fix accessing unset transport header net: stmmac: fix leaks in probe net: ftgmac100: Hold reference returned by of_get_child_by_name() nexthop: Fix data-races around nexthop_compat_mode. ipv4: Fix data-races around sysctl_ip_dynaddr. tcp: Fix a data-race around sysctl_tcp_ecn_fallback. ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three smb3 client fixes: - two multichannel fixes: fix a potential deadlock freeing a channel, and fix a race condition on failed creation of a new channel - mount failure fix: work around a server bug in some common older Samba servers by avoiding padding at the end of the negotiate protocol request" * tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: workaround negprot bug in some Samba servers cifs: remove unnecessary locking of chan_lock while freeing session cifs: fix race condition with delayed threads -
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Enable SETATTR(time_create) to fix regression with Mac OS clients - Fix a lockd crasher and broken NLM UNLCK behavior" * tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: lockd: fix nlm_close_files lockd: set fl_owner when unlocking files NFSD: Decode NFSv4 birth time attribute
-
Linus Torvalds authored
Merge tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Here are a number of fixes for recently found bugs. Only 'ima: fix violation measurement list record' was introduced in the current release. The rest address existing bugs" * tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Fix potential memory leak in ima_init_crypto() ima: force signature verification when CONFIG_KEXEC_SIG is configured ima: Fix a potential integer overflow in ima_appraise_measurement ima: fix violation measurement list record Revert "evm: Fix memleak in init_desc"
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - quieten the spectre-bhb prints - mark flattened device tree sections as shareable - remove some obsolete CPU domain code and help text - fix thumb unaligned access abort emulation - fix amba_device_add() refcount underflow - fix literal placement * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9208/1: entry: add .ltorg directive to keep literals in range ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction ARM: 9213/1: Print message about disabled Spectre workarounds only once ARM: 9212/1: domain: Modify Kconfig help text ARM: 9211/1: domain: drop modify_domain() ARM: 9210/1: Mark the FDT_FIXED sections as shareable ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
-
Guenter Roeck authored
The UML function names to_virt() and to_phys() are exposed by UML headers, and are very generic and may be defined by drivers. As it turns out, commit 9409c9b6 ("pmem: refactor pmem_clear_poison()") did exactly that. This results in build errors such as the following when trying to build um:allmodconfig: drivers/nvdimm/pmem.c: In function ‘pmem_dax_zero_page_range’: ./arch/um/include/asm/page.h:105:20: error: too few arguments to function ‘to_phys’ 105 | #define __pa(virt) to_phys((void *) (unsigned long) (virt)) | ^~~~~~~ Use less generic function names for the um specific to_phys() and to_virt() functions to fix the problem and to avoid similar problems in the future. Fixes: 9409c9b6 ("pmem: refactor pmem_clear_poison()") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Hopefully the last one for 5.19. This became bigger than wished, but all changes are pretty device-specific small fixes, which look less worrisome. The majority of changes are about various ASoC fixes, while the usual HD-audio quirks are included as well" * tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221 ALSA: hda/realtek: fix mute/micmute LEDs for HP machines ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671 ALSA: hda - Add fixup for Dell Latitidue E5430 ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model ALSA: hda/realtek: Fix headset mic for Acer SF313-51 ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks() ASoC: rt5640: Fix the wrong state of JD1 and JD2 ASoC: Intel: sof_rt5682: fix out-of-bounds array access ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph() ASoC: tas2764: Fix amp gain register offset & default ASoC: tas2764: Correct playback volume range ASoC: tas2764: Fix and extend FSYNC polarity handling ASoC: tas2764: Add post reset delays ASoC: dt-bindings: Fix description for msm8916 ASoC: doc: Capitalize RESET line name ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE ASoC: cs47l92: Fix event generation for OUT1 demux ...
-
Tianyu Yuan authored
nfp_tun_write_neigh() function will configure a tunnel neighbour when calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx() (with no tunnel neighbour type) from firmware. When configuring IP on physical port as a tunnel endpoint, no operation will be performed after receiving the cmsg mentioned above. Therefore, add a progress to configure tunnel neighbour in this case. v2: Correct format of fixes tag. Fixes: f1df7956 ("nfp: flower: rework tunnel neighbour configuration") Signed-off-by:
Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Reviewed-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Tariq Toukan authored
Add missing error checks in tls_device_init. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Reported-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220714070754.1428-1-tariqt@nvidia.comSigned-off-by:
-
Tom Lendacky authored
Add Shyam Sundar S K as an additional maintainer to support the AMD XGBE network device driver. Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/db367f24089c2bbbcd1cec8e21af49922017a110.1657751501.git.thomas.lendacky@amd.comSigned-off-by:
-
Juergen Gross authored
xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty. Cc: stable@vger.kernel.org Fixes: 98f6d57c ("xen-netback: process guest rx packets in batches") Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.comSigned-off-by:
-
Linus Torvalds authored
The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has not been building cleanly on powerpc and causes link errors due to mixing hard- and soft-float object files: powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o [..] and while patches are floating around, it's not exactly obvious what is going on. The problem bisects to commit 41b7a347 ("powerpc: Book3S 64-bit outline-only KASAN support") but that is probably more about changing config variables than the fundamental cause. Despite the bisection result, a more directly related commit seems to be 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder"). It's probably a combination of the two. This has been going on since the merge window, without any final word. So instead of blindly applying patches that may or may not be the right thing, let's disable this for now. As Michael Ellerman says: "IIUIC this code was never enabled on ppc before, so disabling it seems like a reasonable fix to get the build clean" and once we have more actual feedback (and find any potential users) we can always re-enable it with the patch that fixes the issues and back-port as necessary. Fixes: 41b7a347 ("powerpc: Book3S 64-bit outline-only KASAN support") Fixes: 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Reported-and-tested-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
This test implement the scenario described in the commit "ip: fix dflt addr selection for connected nexthop". The test configures a nexthop object with an output device only (no gateway address) and a route that uses this nexthop. The goal is to check if the kernel selects a valid source address. Link: https://lore.kernel.org/netdev/20220712095545.10947-1-nicolas.dichtel@6wind.com/Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220713114853.29406-2-nicolas.dichtel@6wind.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Nicolas Dichtel authored
When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used. When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist. To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted. When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default. Here is a way to reproduce the problem: ip netns add foo ip -n foo link set lo up ip netns add bar ip -n bar link set lo up sleep 1 ip -n foo link add name eth0 type dummy ip -n foo link set eth0 up ip -n foo address add 192.168.0.1/24 dev eth0 ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up ip -n bar link set veth1 up ip -n bar address add 192.168.1.1/32 dev veth1 ip -n bar route add default dev veth1 ip -n foo nexthop add id 1 dev veth0 ip -n foo route add 192.168.1.1 nhid 1 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > RTNETLINK answers: Invalid argument > $ ip netns exec foo ping -c1 192.168.1.1 > ping: connect: Invalid argument Try without nexthop group (iproute2 sets scope to 'link' by dflt): ip -n foo route del 192.168.1.1 ip -n foo route add 192.168.1.1 dev veth0 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > 192.168.1.1 dev veth0 src 192.168.0.1 uid 0 > cache > $ ip netns exec foo ping -c1 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms > > --- 192.168.1.1 ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms CC: stable@vger.kernel.org Fixes: 597cfe4f ("nexthop: Add support for IPv4 nexthops") Reported-by:
Edwin Brossette <edwin.brossette@6wind.com> Signed-off-by:
-
Ard Biesheuvel authored
LKP reports a build issue on Clang, related to a literal load of __current issued through the ldr_va macro. This turns out to be due to the fact that group relocations are disabled when CONFIG_COMPILE_TEST=y, which means that the ldr_va macro resolves to a pair of LDR instructions, the first one being a literal load issued too far from its literal pool. Due to the introduction of a couple of new uses of this macro in commit 50807460 ("ARM: 9195/1: entry: avoid explicit literal loads"), the literal pools end up getting rearranged in a way that causes the literal for __current to go out of range. Let's fix this up by putting a .ltorg directive in a suitable place in the code. Link: https://lore.kernel.org/all/202205290805.1vZLAr36-lkp@intel.com/ Fixes: 50807460 ("ARM: 9195/1: entry: avoid explicit literal loads") Reported-by:
Ard Biesheuvel <ardb@kernel.org> Tested-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-
Wang Kefeng authored
"ARM: 9192/1: amba: fix memory leak in amba_device_try_add()" leads to a refcount underflow if amba_device_add() fails, which called by of_amba_device_create(), the of_amba_device_create() already exists the error handling, so amba_put_device() only need to be added into amba_deferred_retry(). Fixes: 7719a68b ("ARM: 9192/1: amba: fix memory leak in amba_device_try_add()") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Chia-Lin Kao (AceLan) authored
aq_nic_deinit() has been called while suspending, so we don't have to call it again on resume. Actually, call it again leads to another hang issue when resuming from S3. Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace: Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic] Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK> Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace 1ec8c79604ed5e0d ]--- Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110 Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110 Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") Signed-off-by:
Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Link: https://lore.kernel.org/r/20220713111224.1535938-2-acelan.kao@canonical.comSigned-off-by:
-
Chia-Lin Kao (AceLan) authored
Below commit claims that atlantic NIC requires to reset the device on pm op, and had set the deep to true for all suspend/resume functions. commit 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") So, we could remove deep parameter on suspend/resume functions without any functional change. Fixes: 1809c30b ("net: atlantic: always deep reset on pm op, fixing up my null deref regression") Signed-off-by:
-
Íñigo Huguet authored
When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf. When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash: BUG_ON(in_interrupt()); This patch reenables BH to release the buffer. Log messages when the bug is hit: kernel BUG at mm/vmalloc.c:2727! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:vunmap+0x2e/0x30 ...skip... Call Trace: __iommu_dma_free+0x96/0x100 efx_nic_free_buffer+0x2b/0x40 [sfc] efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc] efx_ef10_update_stats_vf+0x18/0x40 [sfc] efx_start_all+0x15e/0x1d0 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xe7/0x1a0 __dev_change_flags+0x1d7/0x240 dev_change_flags+0x21/0x60 ...skip... Fixes: d7788196 ("sfc: DMA the VF stats only when requested") Reported-by:
Ma Yuying <yuma@redhat.com> Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Acked-by:
Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.comSigned-off-by:
-
Paolo Abeni authored
Andrea Mayer says: ==================== seg6: fix skb checksum for SRH encapsulation/insertion The Linux kernel supports Segment Routing Header (SRH) encapsulation/insertion operations by providing the capability to: i) encapsulate a packet in an outer IPv6 header with a specified SRH; ii) insert a specified SRH directly after the IPv6 header of the packet. Note that the insertion operation is also referred to as 'injection'. The two operations are respectively supported by seg6_do_srh_encap() and seg6_do_srh_inline(), which operate on the skb associated to the packet as needed (e.g. adding the necessary headers and initializing them, while taking care to recalculate the skb checksum). seg6_do_srh_encap() and seg6_do_srh_inline() do not initialize the payload length of the IPv6 header, which is carried out by the caller functions. However, this approach causes the corruption of the skb checksum which needs to be updated only after initialization of headers is completed (thanks to Paolo Abeni for detecting this issue). The patchset fixes the skb checksum corruption by moving the IPv6 header payload length initialization from the callers of seg6_do_srh_encap() and seg6_do_srh_inline() directly into these functions. This patchset is organized as follows: - patch 1/3, seg6: fix skb checksum evaluation in SRH encapsulation/insertion; (* SRH encapsulation/insertion available since v4.10) - patch 2/3, seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors; (* SRv6 End.B6 and End.B6.Encaps behaviors available since v4.14) - patch 3/3, seg6: bpf: fix skb checksum in bpf_push_seg6_encap(); (* bpf IPv6 Segment Routing helpers available since v4.18) ==================== Link: https://lore.kernel.org/r/20220712175837.16267-1-andrea.mayer@uniroma2.itSigned-off-by: -
Andrea Mayer authored
Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment Routing Header (SRH) or insert an SRH between the IPv6 header and the payload. To achieve this result, such helper functions rely on bpf_push_seg6_encap() which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the required operation (i.e. encap/inline). This patch removes the initialization of the IPv6 header payload length from bpf_push_seg6_encap(), as it is now handled properly by seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum. Fixes: fe94cc29 ("bpf: Add IPv6 Segment Routing helpers") Signed-off-by:Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by:
-
Andrea Mayer authored
The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the packet within an outer IPv6 header with the specified Segment Routing Header (SRH); ii) insert the specified SRH directly after the IPv6 header of the packet. This patch removes the initialization of the IPv6 header payload length from the input_action_end_b6{_encap}() functions, as it is now handled properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb checksum. Fixes: 140f04c3 ("ipv6: sr: implement several seg6local actions") Signed-off-by: -
Andrea Mayer authored
Support for SRH encapsulation and insertion was introduced with commit 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels"), through the seg6_do_srh_encap() and seg6_do_srh_inline() functions, respectively. The former encapsulates the packet in an outer IPv6 header along with the SRH, while the latter inserts the SRH between the IPv6 header and the payload. Then, the headers are initialized/updated according to the operating mode (i.e., encap/inline). Finally, the skb checksum is calculated to reflect the changes applied to the headers. The IPv6 payload length ('payload_len') is not initialized within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e. the caller of seg6_do_srh_{inline,encap}(). However, this operation invalidates the skb checksum, since the 'payload_len' is updated only after the checksum is evaluated. To solve this issue, the initialization of the IPv6 payload length is moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}() functions and before the skb checksum update takes place. Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-07-12 This series contains updates to ice driver only. Paul fixes detection of E822 devices for firmware update and changes NVM read for snapshot creation to be done in chunks as some systems cannot read the entire NVM in the allotted time. ==================== Link: https://lore.kernel.org/r/20220712164829.7275-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Íñigo Huguet authored
Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching. Set the pointer to NULL at release time to not trying to read it later. Reproducer and dmesg log (note that kfence doesn't detect it every time): $ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs $ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224): efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] efx_ef10_pci_sriov_disable+0x38/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k allocated by task 6771 on cpu 10 at 3137.860196s: pci_alloc_dev+0x21/0x60 pci_iov_add_virtfn+0x2a2/0x320 sriov_enable+0x212/0x3e0 efx_ef10_sriov_configure+0x67/0x80 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xba/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae freed by task 6771 on cpu 12 at 3170.991309s: device_release+0x34/0x90 kobject_cleanup+0x3a/0x130 pci_iov_remove_virtfn+0xd9/0x120 sriov_disable+0x30/0xe0 efx_ef10_pci_sriov_disable+0x57/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 3c5eb876 ("sfc: create vports for VFs and assign random MAC addresses") Reported-by:
Yanghang Liu <yanghliu@redhat.com> Signed-off-by:
Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.comSigned-off-by:
-
Steve French authored
Mount can now fail to older Samba servers due to a server bug handling padding at the end of the last negotiate context (negotiate contexts typically are rounded up to 8 bytes by adding padding if needed). This server bug can be avoided by switching the order of negotiate contexts, placing a negotiate context at the end that does not require padding (prior to the recent netname context fix this was the case on the client). Fixes: 73130a7b ("smb3: fix empty netname context on secondary channels") Reported-by:
Julian Sikorski <belegdol@gmail.com> Tested-by:
Julian Sikorski <belegdol+github@gmail.com> Reviewed-by:
Shyam Prasad N <sprasad@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com>
-
- 13 Jul, 2022 8 commits
-
-
Ansgar Lößer authored
When using the FIDEDUPRANGE ioctl, in case of success the requested size is returned. In some cases this might not be the actual amount of bytes deduplicated. This change modifies vfs_dedupe_file_range() to report the actual amount of bytes deduplicated, instead of the requested amount. Link: https://lore.kernel.org/linux-fsdevel/5548ef63-62f9-4f46-5793-03165ceccacc@tu-darmstadt.de/Reported-by:
Ansgar Lößer <ansgar.loesser@kom.tu-darmstadt.de> Reported-by:
Max Schlecht <max.schlecht@informatik.hu-berlin.de> Reported-by:
Björn Scheuermann <scheuermann@kom.tu-darmstadt.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Darrick J Wong <djwong@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "Fix an old and subtle bug in the migration path. css_sets are used to track tasks and migrations are tasks moving from a group of css_sets to another group of css_sets. The migration path pins all source and destination css_sets in the prep stage. Unfortunately, it was overloading the same list_head entry to track sources and destinations, which got confused for migrations which are partially identity leading to use-after-frees. Fixed by using dedicated list_heads for tracking sources and destinations" * tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Use separate src/dst nodes when preloading css_sets for migration
-
Dave Chinner authored
If dedupe of an EOF block is not constrainted to match against only other EOF blocks with the same EOF offset into the block, it can match against any other block that has the same matching initial bytes in it, even if the bytes beyond EOF in the source file do not match. Fix this by constraining the EOF block matching to only match against other EOF blocks that have identical EOF offsets and data. This allows "whole file dedupe" to continue to work without allowing eof blocks to randomly match against partial full blocks with the same data. Reported-by:
Ansgar Lößer <ansgar.loesser@tu-darmstadt.de> Fixes: 1383a7ed ("vfs: check file ranges before cloning files") Link: https://lore.kernel.org/linux-fsdevel/a7c93559-4ba1-df2f-7a85-55a143696405@tu-darmstadt.de/Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
-
Jianglei Nie authored
On failure to allocate the SHA1 tfm, IMA fails to initialize and exits without freeing the ima_algo_array. Add the missing kfree() for ima_algo_array to avoid the potential memory leak. Signed-off-by:
Jianglei Nie <niejianglei2021@163.com> Fixes: 6d94809a ("ima: Allocate and initialize tfm for each PCR bank") Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com>
-
Coiby Xu authored
Currently, an unsigned kernel could be kexec'ed when IMA arch specific policy is configured unless lockdown is enabled. Enforce kernel signature verification check in the kexec_file_load syscall when IMA arch specific policy is configured. Fixes: 99d5cadf ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE") Reported-and-suggested-by:
Coiby Xu <coxu@redhat.com> Signed-off-by:
-
Nick Bowler authored
This driver currently prints the link status using four separate printk calls, which these days gets presented to the user as four distinct messages, not exactly ideal: [ 32.582778] eth0: Link is up using [ 32.582828] internal [ 32.582837] transceiver at [ 32.582888] 100Mb/s, Full Duplex. Restructure the display_link_mode function to use a single netdev_info call to present all this information as a single message, which is much nicer: [ 33.640143] hme 0000:00:01.1 eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex. The display_forced_link_mode function has a similar structure, so adjust it in a similar fashion. Signed-off-by:
Nick Bowler <nbowler@draconx.ca> Signed-off-by:
-
Hayes Wang authored
A warning is triggered by commit 66e4c8d9 ("net: warn if transport header was not set"). The warning is harmless, because the value from skb_transport_offset() is only used for skb_is_gso() is true or the skb->ip_summed is equal to CHECKSUM_PARTIAL. Fixes: 66e4c8d9 ("net: warn if transport header was not set") Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
Johannes Berg says: ==================== A small set of fixes for * queue selection in mesh/ocb * queue handling on interface stop * hwsim virtio device vs. some other virtio changes * dt-bindings email addresses * color collision memory allocation * a const variable in rtw88 * shared SKB transmit in the ethernet format path * P2P client port authorization ==================== Signed-off-by:
-
