- 15 Mar, 2023 28 commits
-
-
Stefan Raspl authored
Signed-off-by:
Stefan Raspl <raspl@linux.ibm.com> Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Raspl authored
Previously, v2 support was derived from a very specific format of the SEID as part of the SMC-D codebase. Make this part of the SMC-D device API, so implementers do not need to adhere to a specific SEID format. Signed-off-by:
Jan Karcher <jaka@linux.ibm.com> Reviewed-by:
-
Josef Miegl authored
The GENEVE tunnel used with IFLA_GENEVE_INNER_PROTO_INHERIT is point-to-point, so set IFF_POINTOPOINT to reflect that. Signed-off-by:
Josef Miegl <josef@miegl.cz> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/ca8210.c:3174:34: error: ‘ca8210_of_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/at86rf230.c:1644:34: error: ‘at86rf230_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/mcr20a.c:1340:34: error: ‘mcr20a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/adf7242.c:1322:34: error: ‘adf7242_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/phy/spi_ks8995.c:156:34: error: ‘ks8895_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/ocelot_ext.c:143:34: error: ‘ocelot_ext_switch_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/microchip/ksz9477_i2c.c:84:34: error: ‘ksz9477_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/seville_vsc9953.c:1070:34: error: ‘seville_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly or only by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/lan9303_i2c.c:97:34: error: ‘lan9303_i2c_of_match’ defined but not used [-Werror=unused-const-variable=] drivers/net/dsa/lan9303_mdio.c:157:34: error: ‘lan9303_mdio_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/net/dsa/lantiq_gswip.c:1888:34: error: ‘xway_gphy_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/nfc/trf7970a.c:2232:34: error: ‘trf7970a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Mark Greer <mgreer@animalcreek.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/ni/nixge.c:1253:34: error: ‘nixge_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:220:34: error: ‘sxgbe_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/marvell/pxa168_eth.c:1575:34: error: ‘pxa168_eth_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c:72:34: error: ‘dwmac_generic_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver is specific to ARCH_QCOM which depends on OF thus the driver is OF-only. Its of_device_id table is built unconditionally, thus of_match_ptr() for ID table does not make sense. Signed-off-by:
-
David S. Miller authored
Oleksij Rempel says: ==================== net: dsa: microchip: tc-ets support changes v3: - add tc_ets_supported to match supported devices - dynamically regenerated default TC to queue map. - add Acked-by to the first patch changes v2: - run egress limit configuration on all queue separately. Otherwise configuration may not apply correctly. ==================== Signed-off-by: -
Oleksij Rempel authored
Add ETS Qdisc support for KSZ9477 of switches. Current implementation is limited to strict priority mode. Tested on KSZ8563R with following configuration: tc qdisc replace dev lan2 root handle 1: ets strict 4 \ priomap 3 3 2 2 1 1 0 0 ip link add link lan2 name v1 type vlan id 1 \ egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 and patched iperf3 version: https://github.com/esnet/iperf/pull/1476 iperf3 -c 172.17.0.1 -b100M -l1472 -t100 -u -R --sock-prio 2 Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Oleksij Rempel authored
Add ksz_setup_tc_mode() to make queue scheduling and shaping configuration more visible. Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== ipv6: optimize rt6_score_route() This patch series remove an expensive rwlock acquisition in rt6_check_neigh()/rt6_score_route(). First patch adds missing annotations, and second patch implements the optimization. ==================== Link: https://lore.kernel.org/r/20230313201732.887488-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
rt6_check_neigh() uses read_lock() to protect n->nud_state reading. This seems overkill and causes false sharing. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
-
Eric Dumazet authored
We have many lockless accesses to n->nud_state. Before adding another one in the following patch, add annotations to readers and writers. Signed-off-by:
-
Horatiu Vultur authored
As the function always returns 0 change the return type to be void instead of int. In this way also remove a wrong message in case of error which would never happen. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
-
- 14 Mar, 2023 2 commits
-
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230310144716.1544083-1-robh@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== i40e: support XDP multi-buffer Tirthendu Sarkar says: This patchset adds multi-buffer support for XDP. Tx side already has support for multi-buffer. This patchset focuses on Rx side. The last patch contains actual multi-buffer changes while the previous ones are preparatory patches. On receiving the first buffer of a packet, xdp_buff is built and its subsequent buffers are added to it as frags. While 'next_to_clean' keeps pointing to the first descriptor, the newly introduced 'next_to_process' keeps track of every descriptor for the packet. On receiving EOP buffer the XDP program is called and appropriate action is taken (building skb for XDP_PASS, reusing page for XDP_DROP, adjusting page offsets for XDP_{REDIRECT,TX}). The patchset also streamlines page offset adjustments for buffer reuse to make it easier to post process the rx_buffers after running XDP prog. With this patchset there does not seem to be any performance degradation for XDP_PASS and some improvement (~1% for XDP_TX, ~5% for XDP_DROP) when measured using xdp_rxq_info program from samples/bpf/ for 64B packets. v1: https://lore.kernel.org/netdev/20230306210822.3381942-1-anthony.l.nguyen@intel.com/ * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: add support for XDP multi-buffer Rx i40e: add xdp_buff to i40e_ring struct i40e: introduce next_to_process to i40e_ring i40e: use frame_sz instead of recalculating truesize for building skb i40e: Change size to truesize when using i40e_rx_buffer_flip() i40e: add pre-xdp page_count in rx_buffer i40e: change Rx buffer size for legacy-rx to support XDP multi-buffer i40e: consolidate maximum frame size calculation for vsi ==================== Link: https://lore.kernel.org/r/20230309212819.1198218-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 13 Mar, 2023 8 commits
-
-
Pedro Tammela authored
Add tests that check if filters can bind actions, that is create an action independently and then bind to a filter. tdc-tests under category 'infra': 1..18 ok 1 abdc - Reference pedit action object in filter ok 2 7a70 - Reference mpls action object in filter ok 3 d241 - Reference bpf action object in filter ok 4 383a - Reference connmark action object in filter ok 5 c619 - Reference csum action object in filter ok 6 a93d - Reference ct action object in filter ok 7 8bb5 - Reference ctinfo action object in filter ok 8 2241 - Reference gact action object in filter ok 9 35e9 - Reference gate action object in filter ok 10 b22e - Reference ife action object in filter ok 11 ef74 - Reference mirred action object in filter ok 12 2c81 - Reference nat action object in filter ok 13 ac9d - Reference police action object in filter ok 14 68be - Reference sample action object in filter ok 15 cf01 - Reference skbedit action object in filter ok 16 c109 - Reference skbmod action object in filter ok 17 4abc - Reference tunnel_key action object in filter ok 18 dadd - Reference vlan action object in filter Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230309175554.304824-1-pctammela@mojatatu.comSigned-off-by:
-
Maxim Korotkov authored
The value of an arithmetic expression is subject of possible overflow due to a failure to cast operands to a larger data type before performing arithmetic. Used macro for multiplication instead operator for avoiding overflow. Found by Security Code and Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230309174347.3515-1-korotkov.maxim.s@gmail.comSigned-off-by:
-
Jiri Pirko authored
Virtio spec introduced a feature VIRTIO_NET_F_GUEST_HDRLEN which when set implicates that device benefits from knowing the exact size of the header. For compatibility, to signal to the device that the header is reliable driver also needs to set this feature. Without this feature set by driver, device has to figure out the header size itself. Quoting the original virtio spec: "hdr_len is a hint to the device as to how much of the header needs to be kept to copy into each packet" "a hint" might not be clear for the reader what does it mean, if it is "maybe like that" of "exactly like that". This feature just makes it crystal clear and let the device count on the hdr_len being filled up by the exact length of header. Also note the spec already has following note about hdr_len: "Due to various bugs in implementations, this field is not useful as a guarantee of the transport header size." Without this feature the device needs to parse the header in core data path handling. Accurate information helps the device to eliminate such header parsing and directly use the hardware accelerators for GSO operation. virtio_net_hdr_from_skb() fills up hdr_len to skb_headlen(skb). The driver already complies to fill the correct value. Introduce the feature and advertise it. Note that virtio spec also includes following note for device implementation: "Caution should be taken by the implementation so as to prevent a malicious driver from attacking the device by setting an incorrect hdr_len." There is a plan to support this feature in our emulated device. A device of SolidRun offers this feature bit. They claim this feature will save the device a few cycles for every GSO packet. Link: https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-230006x3Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230309094559.917857-1-jiri@resnulli.usSigned-off-by:
-
Kristian Overskeid authored
If no frames has been exchanged with a node for HSR_NODE_FORGET_TIME, the node will be deleted from the node_db list. If a frame is sent to the node after it is deleted, a netdev_err message for each slave interface is produced. This should not happen with dan nodes because of supervision frames, but can happen often with san nodes, which clutters the kernel log. Since the hsr protocol does not support sans, this is only relevant for the prp protocol. Signed-off-by:
Kristian Overskeid <koverskeid@gmail.com> Link: https://lore.kernel.org/r/20230309092302.179586-1-koverskeid@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Use unified device property API. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a969f012-1d3b-7a36-51cf-89a5f8f15a9b@gmail.comSigned-off-by:
-
Vincenzo Palazzo authored
suppress unused warnings and fix the error that there is with the W=1 enabled. Warning generated net/socket.c: In function ‘__sys_getsockopt’: net/socket.c:2300:13: error: variable ‘max_optlen’ set but not used [-Werror=unused-but-set-variable] 2300 | int max_optlen; Signed-off-by:
Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230310221851.304657-1-vincenzopalazzodev@gmail.comSigned-off-by:
-
Alexander Stein authored
Before putting the PHY into IEEE power down mode, disable IRQs to prevent accessing the PHY once MDIO has already been shutdown. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230310074500.3472858-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Horatiu Vultur authored
Lan8841 has 10 GPIOs and it has 2 events(EVENT_A and EVENT_B). It is possible to assigned the 2 events to any of the GPIOs, but a GPIO can have only 1 event at a time. These events are used to generate periodic signals. It is possible to configure the length, the start time and the period of the signal by configuring the event. Currently the SW uses only EVENT_A to generate the perout. These events are generated by comparing the target time with the PHC time. In case the PHC time is changed to a value bigger than the target time + reload time, then it would generate only 1 event and then it would stop because target time + reload time is small than PHC time. Therefore it is required to change also the target time every time when the PHC is changed. The same will apply also when the PHC time is changed to a smaller value. This was tested using: testptp -L 6,2 testptp -p 1000000000 -w 200000000 Signed-off-by:
-
- 11 Mar, 2023 2 commits
-
-
Muhammad Usama Anjum authored
make versioncheck reports the following: ./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed. ./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed. So remove linux/version.h from both of these files. Also remove linux/compiler.h while at it as it is also not being used. Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by:
-
Edward Cree authored
EF100 can pop and/or push up to two VLAN tags. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
-
