- 03 Dec, 2020 4 commits
-
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/9579804f52ccab74a5ca5c7a55b5072b7304bea9.1606045688.git.lorenzo@kernel.orgSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lorenzo Bianconi authored
Like all other ST sensors, hts221 devices have VDD power line. Introduce VDD voltage regulator to control it. Signed-off-by:
-
William Breathitt Gray authored
Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by:
Kamel Bouhara <kamel.bouhara@bootlin.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20201121185824.451477-1-vilhelm.gray@gmail.comSigned-off-by:
-
Alexandru Ardelean authored
'st->ext_ref' & 'st->reg' are both non-zero/non-null at the same time, so logically the code isn't broken. But it is more correct to check that 'st->reg' is non-null, since we make sure that the regulator is NULL (in probe) in case one isn't defined. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201127094038.91714-2-alexandru.ardelean@analog.comSigned-off-by:
-
- 28 Nov, 2020 1 commit
-
-
Alexandru Ardelean authored
This change converts the probe of this driver to use device-managed register functions, and a devm_add_action_or_reset() for the regulator disable. With this, the exit & error paths can be removed. Another side-effect is that this should avoid some static-analyzer's check with respect to a potential null dereference of the regulator. The null dereference isn't likely to happen (under normal operation), so there isn't a requirement to have this fixed/backported in other releases. As a note: this is removing spi_set_drvdata() since there is no other spi_get_drvdata() (or dev_get_drvdata()) call that need it. Signed-off-by:
-
- 25 Nov, 2020 16 commits
-
-
Lorenzo Bianconi authored
Signed-off-by:
-
Lorenzo Bianconi authored
Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power lines. Introduce voltage regulators to control them. Signed-off-by:
-
Jonathan Cameron authored
So far, the thermocouple-type property described in here is only used in a single driver. Whilst I would like it to be more generally used that hasn't happened yet and I don't see a reason to maintain this small file in the hope that it happens. I pushed for this generic binding in the first place. Hopefully we can bring it back at somepoint. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Patrick Havelange <patrick.havelange@essensium.com> Link: https://lore.kernel.org/r/20201031184854.745828-47-jic23@kernel.org
-
Jonathan Cameron authored
This is a large but fairly simple binding. It may well be possible to constrain some of the properties more than currently done, but that would involve diving into datasheets for the supported parts. Hence for this initial conversion just use the information that was in the txt file. Signed-off-by:
-
Jonathan Cameron authored
This binding document covers a very large number of different sensors. As such the existing documentation is less specific than it could be (such as which devices have 2 interrupt pin options). That can be improved later. Denis, are you happy to be listed as maintainer for this one? If not feel free to suggestion someone else. Signed-off-by:
Denis Ciocca <denis.ciocca@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Link: https://lore.kernel.org/r/20201031184854.745828-45-jic23@kernel.org
-
Jonathan Cameron authored
Very simple direct conversion of existing txt file. Signed-off-by:
-
Jonathan Cameron authored
Simple binding so mostly straight forward to convert. Original binding was unclear on how many interrupts there are. The device has two such lines, whilst I believe the driver currently only uses one at a time. The binding should allow both to be specified. Signed-off-by:
-
Jonathan Cameron authored
Very simple binding hence a straight forward conversion. Signed-off-by:
-
Jonathan Cameron authored
One question in here is whether we want to constrain the number of interrupts. Some parts definitely only have 1 such pin, and others 2 pins but I can not find information on the bma254. Oleksandr's email address is bouncing so I've listed myself as maintainer for this binding until someone else steps up. Signed-off-by:
-
Jonathan Cameron authored
This is a more complex binding. Whilst conversion is straight forward I am unsure if the full nature of required properties has been captured. Signed-off-by:
-
Jonathan Cameron authored
Simple binding so straight forward format conversion. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20201031184854.745828-38-jic23@kernel.org
-
Jonathan Cameron authored
Straight forward conversion. Not heard from Ivan in a while so if the email bounces, I'll change the maintainer to myself for this binding unless anyone else comes forwards. Signed-off-by:
-
Jonathan Cameron authored
Renamed to match a listed compatible rather than relying on wildcards with all their usual problems. Dropped the reference supply as a requirement as at least one dtsi doesn't include it and the example never did. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201031184854.745828-36-jic23@kernel.org
-
Jonathan Cameron authored
Simple conversion of the binding doc for this subnode of the palmas PMIC. Given age of driver and lack interaction with original authors, I've guessed at Tony for a maintainer on this one. Tony, if you are happy with that great, otherwise I can default back to myself. Signed-off-by:
-
Jonathan Cameron authored
The current driver and indeed binding are named after a part that they do not list in the compatible. Hence renamed the binding to reflect one that does. >From the driver it looks like there is a lot more backwards compatibility than the binding currently reflects. We could consider expressing that more explicitly in the yaml for the compatible property. I have added one explicit pair that was present in the upstream dtsi files. I added Matthias alongside Zhiyong Tao because I don't think Zhiyong Tao has reviewed recent patches. Please let me know if this isn't the right thing to do. Signed-off-by:
-
Jonathan Cameron authored
A few questions came up in this one. 1) Why does the txt file document io-channel-ranges as a required property. That property is for iio-channel consumers, and this is a provider. I have dropped it. 2) The example had an @180a6000 for the ADC but given it uses syscon for all access, it doesn't have its own reg etc. I've dropped that from the binding example. Note this example was lifted directly from bcm-cygnus.dtsi so both issues are present there as well. Signed-off-by:
-
- 24 Nov, 2020 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.11 cycle Usual mixed bag of new drivers / device support + cleanups etc with the addition of a fairly big set of yaml conversions. Txt to yaml format conversions. In some cases dropped separate binding and moved to trivial devices (drop). Listed by manufacturer - dht11 temperature(drop) - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303 adi,adis16480 adi,adf4350 - ams,as3935 - asahi-kasei,ak8974 - atmel,sama5d2-adc - avago,apds9300 avago,apds9960 - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180 - brcm,iproc-static-adc - capella,cm36651 - domintech,dmard06(drop) - fsl,mag3110 fsl,mma8452 fsl,vf610-dac - hoperf,hp03 - honeywell,hmc5843 - kionix,kxcjk1013 - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102 maxim,max31856 maxim,max31855k maxim,max44009 maxim,max5481 maxim,max5821 - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop) - mediatek,mt2701-auxadc - melexis,mlx90614 melexis,mlx90632 - memsic,mmc35240(drop) - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725 - murata,zap2326 - nxp,fxas21002c nxp,lpc1850-dac - pni,rm3100 - qcom,pm8018-adc qcom,spmi-iadc - renesas,isl29501 renesas,rcar-gyroadc - samsung,sensorhub-rinato - sensiron,sgp30 - sentech,sx9500 - sharp,gp2ap020a00f - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180 - ti,adc084s021 ti,ads124s08 ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612 ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07 - upisemi,us51882 - vishay,vcnl4035 - x-powers,axp209 New device support * adi,ad5685 - Add support for AD5338R dual output 10-bit DAC - Add DT-binding doc. * mediatek,mt6360 - New driver for this SoC ADC with bindings and using new channel label support in the IIO core. * st,lsm6dsx - Add support for LSM6DST Core: * Add "label" to device channels, provided via a new core callback. Including DT docs for when that is the source, and ABI docs. * Add devm_iio_triggered_buffer_setup_ext to take extra attributes. * dmaengine, unwrap use of iio_buffer_set_attrs() * Drop iio_buffer_set_attrs() * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if no handler has run. * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect any known existing drivers, but will impact a future one. * kernel-doc fix in trigger.h * file-ops ordering cleanup Features * semtech,sx9310 - Add control of hardware gain, proximity thresholds, hysteresis and debounce. - Increase what information on hardware configuration can be provided via DT. Cleanup and minor features * adi,ad5685 - Add of_match_table * adi,ad7292 - Drop pointless spi_set_drvdata() call * adi,ad7298 - Drop platform data and tidy up external reference config. * adi,ad7303 - Drop platform data handling as unused. * adi,ad7768 - Add new label attribute for channels provided from dt. * adi,ad7887 - devm_ usage in probe simplifying remove and error handling. * adi,adis16201 - Drop pointless spi_set_drvdata() call * adi,adis16209 - Drop pointless spi_set_drvdata() call * adi,adis16240 - White space fixup * adi,adxl372 - use new devm_iio_triggered-buffer_setup_ext() * amlogic,meson-saradc - Drop pointless semicolon. * amstaos,tsl2563 - Put back i2c_device_id table as needed for greybus probing. * atmel,at91_adc - Use of_device_get_match_data() instead of open coding it. - Constify some driver data - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr() - Drop platform data as mostly dead code. - Tidy up reference voltage logic * atmel-sama5d2 - Drop a pointless semicolon - Merge buffer and trigger init into a separate function - Use new devm_iio_triggered_buff_setup_ext() * avago,apds9960 - Drop a pointless semicolon * bosch,bmc150 - Drop a pointless semicolon - Use new iio_triggered_buffer_setup_ext() * bosch,bmp280 - Drop a pointless semicolon * fsl,mma8452 - Constification * (google),cros_ec - Use new devm_iio_triggered_buffer_setup_ext() * hid-sensors - Use new iio_triggered_buffer_setup_ext() * ingenic,adc - Drop a pointless semicolon * invensense,icm426xx - Fix MAINTAINERS entry missing : * mediatek,mt6577_audxac - Add binding doc for mt8516 compatible with mt8173 * motorola,cpcap-adc - Fix an implicit fallthrough marking that clang needs to avoid warning. * samsung,exynos-adc - Stop relying on users counter form input device in ISR. * st,lsm6dsx - add vdd and vddio regulator control (including binding update) * st,stm32-adc - Tidy up code for dma transfers. - Adapt clock duty cycle for proper functioning. Note no known problems with existing boards. * st,vl53l0x-i2c - Put back i2c_device_id table as needed for greybus probing. * vishay,vcnl4035 - Put back i2c_device_id table as needed for greybus probing. * tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion. dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion. dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion. dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion dt-bindings:iio:light:st,vl6180: txt to yaml format conversion. dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion. dt-bindings:iio:light:ti,opt3001: txt to yaml conversion dt-bindings:iio:light:maxim,max44009: txt to yaml conversion. dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion. dt-bindings:iio:light:capella,cm36651: txt to yaml conversion. dt-bindings:iio:light:avago,apds9960: txt to yaml conversion dt-bindings:iio:light:avago,apds9300: txt to yaml conversion. dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion ...
-
- 23 Nov, 2020 15 commits
-
-
Jonathan Cameron authored
This is a very small binding. It might make sense at some stage to just roll it into the parent mfd. For now, converted as is. The main advantage of this document is the identification of the channel index values when this is used as a provider of ADC channels to consumers. Signed-off-by:
-
Ioana Ciornei authored
The structures defined in the dpsw-cmd.h header file describe exactly the layout of commands accepted by the MC firmware. Make sure that all these structures are packed. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201119165017.806696-4-ciorneiioana@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ioana Ciornei authored
When in the PREPARE state of a switchdev transaction, check if the requested VLAN is not already configured on the switch port. This keeps us from getting into a WARNING as below. [ 1389.683296] dpaa2_ethsw dpsw.0 eth0: VLAN 2 already configured [ 1389.689125] ------------[ cut here ]------------ [ 1389.694084] eth0: Commit of object (id=1) failed. [ 1389.698863] WARNING: CPU: 0 PID: 613 at net/switchdev/switchdev.c:277 switchdev_port_obj_add_now+0xcc/0x110 [ 1389.708589] Modules linked in: [ 1389.711634] CPU: 0 PID: 613 Comm: bridge Not tainted 5.9.0-rc2-next-20200828-00112-g7172078477c5 #59 [ 1389.720753] Hardware name: NXP Layerscape LX2160ARDB (DT) [ 1389.726139] pstate: 40000005 (nZcv daif -PAN -UAO BTYPE=--) [ 1389.731698] pc : switchdev_port_obj_add_now+0xcc/0x110 [ 1389.736824] lr : switchdev_port_obj_add_now+0xcc/0x110 Signed-off-by:
-
Ionut-robert Aron authored
Export the DPSW_CNT_ING_NO_BUFFER_DISCARD counter in ethtool for each switch interface. This is useful for debugging purposes. Signed-off-by:
Ionut-robert Aron <ionut-robert.aron@nxp.com> Signed-off-by:
-
Kaixu Xia authored
The bool variable is2T is true, so the if statement is redundant. we can directly set the variable bound to 8 and remove the if statement. Reported-by:
Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by:
Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1605961041-12875-1-git-send-email-kaixuxia@tencent.comSigned-off-by:
-
Kaixu Xia authored
The two bool variables singletone and carrier_sup are always false and the following if statement can't be true, these code are useless, so remove them. Reported-by:
-
Ding Xiang authored
Use kobj_to_dev() instead of container_of() Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20201117025933.668938-1-dingxiang@cmss.chinamobile.comSigned-off-by:
-
Wang Hai authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4524ac56 ("staging: mfd: add a PMIC driver for HiSilicon 6421 SPMI version") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201118103724.57451-1-wanghai38@huawei.comSigned-off-by:
-
David Gow authored
MFD_CORE is selected by MFD_HI6421_SPMI, and MFD_CORE depends on HAS_IOMEM. If HAS_IOMEM is not set, this can cause a conflict in Kconfig resolution, yielding the following error: WARNING: unmet direct dependencies detected for MFD_CORE Depends on [n]: HAS_IOMEM [=n] Selected by [y]: - MFD_HI6421_SPMI [=y] && STAGING [=y] && OF [=y] && SPMI [=y] By specifying HAS_IOMEM as a dependency for MFD_HI6421_SPMI (as SPMI_HISI3670 already dows), this issue is resolved, and no such warning appears when building on architectures without HAS_IOMEM. Signed-off-by:
David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20201119082903.3601758-1-davidgow@google.comSigned-off-by:
-
Juan Antonio Aldea-Armenteros authored
This patch fixes the following warnings reported by sparse, by adding missing __force annotations. drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32 drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32 drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32 drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32 drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32 drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32 drivers/staging/hikey9xx/hisi-spmi-controller.c:239:25: warning: cast from restricted __be32 Rationale for #164: data is declared as u32, and it is read and then converted by means of be32_to_cpu(). Said function expects a __be32 but data is u32, therefore there's a type missmatch here. Rationale for #239: Is the dual of #164. This time data going to be written so it needs to be converted from cpu to __be32, but writel() expects u32 and the output of cpu_to_be32 returns a __be32. Signed-off-by:
Juan Antonio Aldea-Armenteros <juant.aldea@gmail.com> Link: https://lore.kernel.org/r/20201119122737.189675-1-juant.aldea@gmail.comSigned-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/5a5a8f2489fbf61f65f0241c349737f7c9ad59ca.1605896060.git.gustavoars@kernel.orgSigned-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
Greg Kroah-Hartman authored
We want the staging/IIO fixes in here as well. Signed-off-by:
-
- 22 Nov, 2020 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - Various functionality / regression fixes for Logitech devices from Hans de Goede - Fix for (recently added) GPIO support in mcp2221 driver from Lars Povlsen - Power management handling fix/quirk in i2c-hid driver for certain BIOSes that have strange aproach to power-cycle from Hans de Goede - a few device ID additions and device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver HID: logitech-dj: Fix an error in mse_bluetooth_descriptor HID: Add Logitech Dinovo Edge battery quirk HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices HID: mcp2221: Fix GPIO output handling HID: hid-sensor-hub: Fix issue with devices with no report ID HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown HID: add support for Sega Saturn HID: cypress: Support Varmilo Keyboards' media hotkeys HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses HID: logitech-hidpp: Add PID for MX Anywhere 2 HID: uclogic: Add ID for Trust Flex Design Tablet
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A couple of scheduler fixes: - Make the conditional update of the overutilized state work correctly by caching the relevant flags state before overwriting them and checking them afterwards. - Fix a data race in the wakeup path which caused loadavg on ARM64 platforms to become a random number generator. - Fix the ordering of the iowaiter accounting operations so it can't be decremented before it is incremented. - Fix a bug in the deadline scheduler vs. priority inheritance when a non-deadline task A has inherited the parameters of a deadline task B and then blocks on a non-deadline task C. The second inheritance step used the static deadline parameters of task A, which are usually 0, instead of further propagating task B's parameters. The zero initialized parameters trigger a bug in the deadline scheduler" * tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix priority inheritance with multiple scheduling classes sched: Fix rq->nr_iowait ordering sched: Fix data-race in wakeup sched/fair: Fix overutilized update in enqueue_task_fair()
-
