- 11 Oct, 2018 15 commits
-
-
Ilias Apalodimas authored
commit 63ae7949 ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
David S. Miller <davem@davemloft.net>
-
Moshe Shemesh authored
During boot, mlx4_core sets the driverinit configuration parameters and updates the devlink module on the initial values calling devlink_param_driverinit_value_set(). If devlink_param_driverinit_value_set() returns an error mlx4_core reports kernel module warning. This caused false alarm during boot in case kernel was compiled with CONFIG_NET_DEVLINK off. Fix by removing warning reported in case devlink_param_driverinit_value_set() fails. This actually makes the function mlx4_devlink_set_init_value() redundant to using directly devlink_param_driverinit_value_set() and so removed. It fixes the following kernel trace: mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95) Fixes: bd1b51dc ("mlx4: Add mlx4 initial parameters table and register it") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Ying Xue authored
When booting kernel with LOCKDEP option, below warning info was found: WARNING: possible recursive locking detected 4.19.0-rc7+ #14 Not tainted -------------------------------------------- swapper/0/1 is trying to acquire lock: 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000dcfc0fc8 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 but task is already holding lock: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->lock)->rlock#4); lock(&(&list->lock)->rlock#4); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by swapper/0/1: #0: 00000000f7539d34 (pernet_ops_rwsem){+.+.}, at: register_pernet_subsys+0x19/0x40 net/core/net_namespace.c:1051 #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline] #1: 00000000cbb9b036 (&(&list->lock)->rlock#4){+...}, at: tipc_link_reset+0xfa/0xdf0 net/tipc/link.c:849 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7+ #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1af/0x295 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1759 [inline] check_deadlock kernel/locking/lockdep.c:1803 [inline] validate_chain kernel/locking/lockdep.c:2399 [inline] __lock_acquire+0xf1e/0x3c60 kernel/locking/lockdep.c:3411 lock_acquire+0x1db/0x520 kernel/locking/lockdep.c:3900 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] tipc_link_reset+0x125/0xdf0 net/tipc/link.c:850 tipc_link_bc_create+0xb5/0x1f0 net/tipc/link.c:526 tipc_bcast_init+0x59b/0xab0 net/tipc/bcast.c:521 tipc_init_net+0x472/0x610 net/tipc/core.c:82 ops_init+0xf7/0x520 net/core/net_namespace.c:129 __register_pernet_operations net/core/net_namespace.c:940 [inline] register_pernet_operations+0x453/0xac0 net/core/net_namespace.c:1011 register_pernet_subsys+0x28/0x40 net/core/net_namespace.c:1052 tipc_init+0x83/0x104 net/tipc/core.c:140 do_one_initcall+0x109/0x70a init/main.c:885 do_initcall_level init/main.c:953 [inline] do_initcalls init/main.c:961 [inline] do_basic_setup init/main.c:979 [inline] kernel_init_freeable+0x4bd/0x57f init/main.c:1144 kernel_init+0x13/0x180 init/main.c:1063 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413 The reason why the noise above was complained by LOCKDEP is because we nested to hold l->wakeupq.lock and l->inputq->lock in tipc_link_reset function. In fact it's unnecessary to move skb buffer from l->wakeupq queue to l->inputq queue while holding the two locks at the same time. Instead, we can move skb buffers in l->wakeupq queue to a temporary list first and then move the buffers of the temporary list to l->inputq queue, which is also safe for us. Fixes: 3f32d0be ("tipc: lock wakeup & inputq at tipc_link_reset()") Reported-by:Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== net: explicitly requires bash when needed. Some test scripts require bash-only features but use the default shell. This may cause random failures if the default shell is not bash. Instead of doing a potentially complex rewrite of such scripts, these patches require the bash interpreter, where needed. ==================== Signed-off-by: -
Paolo Abeni authored
The udpgso_bench.sh script requires several bash-only features. This may cause random failures if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter Fixes: 3a687bef ("selftests: udp gso benchmark") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Paolo Abeni authored
the script rtnetlink.sh requires a bash-only features (sleep with sub-second precision). This may cause random test failure if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter. Fixes: 33b01b7b ("selftests: add rtnetlink test script") Signed-off-by:
-
Giacinto Cifelli authored
Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by:
Giacinto Cifelli <gciofono@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In tipc_sk_filter_rcv(), when we detect protocol messages with error we call tipc_sk_conn_proto_rcv() and let it reset the connection and notify the socket by calling sk->sk_state_change(). However, tipc_sk_filter_rcv() may have been called from the function tipc_backlog_rcv(), in which case the socket lock is held and the socket already awake. This means that the sk_state_change() call is ignored and the error notification lost. Now the receive queue will remain empty and the socket sleeps forever. In this commit, we convert the protocol message into a connection abort message and enqueue it into the socket's receive queue. By this addition to the above state change we cover all conditions. Acked-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Jon Maloy authored
In the patch referred to below we added link tolerance as an additional criteria for declaring broadcast transmission "stale" and resetting the affected links. However, the 'tolerance' field of the broadcast link is never set, and remains at zero. This renders the whole commit without the intended improving effect, but luckily also with no negative effect. In this commit we add the missing initialization. Fixes: a4dc70d4 ("tipc: extend link reset criteria for stale packet retransmission") Signed-off-by:
-
David S. Miller authored
Sabrina Dubroca says: ==================== net: ipv4: fixes for PMTU when link MTU changes The first patch adapts the changes that commit e9fa1495 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes") did in IPv6 to IPv4: lower PMTU when the first hop's MTU drops below it, and raise PMTU when the first hop was limiting PMTU discovery and its MTU is increased. The second patch fixes bugs introduced in commit d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") that only appear once the first patch is applied. Selftests for these cases were introduced in net-next commit e44e428f ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests") v2: add cover letter, and fix a few small things in patch 1 ==================== Signed-off-by:
-
Sabrina Dubroca authored
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is received, we must clamp its value. However, we can receive a PMTU exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an increase in PMTU. To fix this, take the smallest of the old MTU and ip_rt_min_pmtu. Before this patch, in case of an update, the exception's MTU would always change. Now, an exception can have only its lock flag updated, but not the MTU, so we need to add a check on locking to the following "is this exception getting updated, or close to expiring?" test. Fixes: d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Sabrina Dubroca authored
Since commit 5aad1de5 ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5 ("ipv4: use separate genid for next hop exceptions") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Mike Rapoport authored
The fib6_info_alloc() function allocates percpu memory to hold per CPU pointers to rt6_info, but this memory is never freed. Fix it. Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers") Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fix packet reception code Here are a set of patches that prepares for and fix problems in rxrpc's package reception code. There serious problems are: (A) There's a window between binding the socket and setting the data_ready hook in which packets can find their way into the UDP socket's receive queues. (B) The skb_recv_udp() will return an error (and clear the error state) if there was an error on the Tx side. rxrpc doesn't handle this. (C) The rxrpc data_ready handler doesn't fully drain the UDP receive queue. (D) The rxrpc data_ready handler assumes it is called in a non-reentrant state. The second patch fixes (A) - (C); the third patch renders (B) and (C) non-issues by using the recap_rcv hook instead of data_ready - and the final patch fixes (D). That last is the most complex. The preparatory patches are: (1) Fix some places that are doing things in the wrong net namespace. (2) Stop taking the rcu read lock as it's held by the IP input routine in the call chain. (3) Only end the Tx phase if *we* rotated the final packet out of the Tx buffer. (4) Don't assume that the call state won't change after dropping the call_state lock. (5) Only take receive window and MTU suze parameters from an ACK packet if it's the latest ACK packet. (6) Record connection-level abort information correctly. (7) Fix a trace line. And then there are three main patches - note that these are mixed in with the preparatory patches somewhat: (1) Fix the setup window (A), skb_recv_udp() error check (B) and packet drainage (C). (2) Switch to using the encap_rcv instead of data_ready to cut out the effects of the UDP read queues and get the packets delivered directly. (3) Add more locking into the various packet input paths to defend against re-entrance (D). ==================== Signed-off-by: -
Ka-Cheong Poon authored
In rds_send_mprds_hash(), if the calculated hash value is non-zero and the MPRDS connections are not yet up, it will wait. But it should not wait if the send is non-blocking. In this case, it should just use the base c_path for sending the message. Signed-off-by:
Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
- 10 Oct, 2018 5 commits
-
-
Eric Dumazet authored
syzbot managed to crash in skb_checksum_help() [1] : BUG_ON(offset + sizeof(__sum16) > skb_headlen(skb)); Root cause is the following check in skb_partial_csum_set() if (unlikely(start > skb_headlen(skb)) || unlikely((int)start + off > skb_headlen(skb) - 2)) return false; If skb_headlen(skb) is 1, then (skb_headlen(skb) - 2) becomes 0xffffffff and the check fails to detect that ((int)start + off) is off the limit, since the compare is unsigned. When we fix that, then the first condition (start > skb_headlen(skb)) becomes obsolete. Then we should also check that (skb_headroom(skb) + start) wont overflow 16bit field. [1] kernel BUG at net/core/dev.c:2880! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 7330 Comm: syz-executor4 Not tainted 4.19.0-rc6+ #253 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_checksum_help+0x9e3/0xbb0 net/core/dev.c:2880 Code: 85 00 ff ff ff 48 c1 e8 03 42 80 3c 28 00 0f 84 09 fb ff ff 48 8b bd 00 ff ff ff e8 97 a8 b9 fb e9 f8 fa ff ff e8 2d 09 76 fb <0f> 0b 48 8b bd 28 ff ff ff e8 1f a8 b9 fb e9 b1 f6 ff ff 48 89 cf RSP: 0018:ffff8801d83a6f60 EFLAGS: 00010293 RAX: ffff8801b9834380 RBX: ffff8801b9f8d8c0 RCX: ffffffff8608c6d7 RDX: 0000000000000000 RSI: ffffffff8608cc63 RDI: 0000000000000006 RBP: ffff8801d83a7068 R08: ffff8801b9834380 R09: 0000000000000000 R10: ffff8801d83a76d8 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000010001 R14: 000000000000ffff R15: 00000000000000a8 FS: 00007f1a66db5700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7d77f091b0 CR3: 00000001ba252000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_csum_hwoffload_help+0x8f/0xe0 net/core/dev.c:3269 validate_xmit_skb+0xa2a/0xf30 net/core/dev.c:3312 __dev_queue_xmit+0xc2f/0x3950 net/core/dev.c:3797 dev_queue_xmit+0x17/0x20 net/core/dev.c:3838 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x422d/0x64c0 net/packet/af_packet.c:2953 Fixes: 5ff8dda3 ("net: Ensure partial checksum offset is inside the skb head") Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
David S. Miller authored
Moshe Shemesh says: ==================== devlink param type string fixes This patchset fixes devlink param infrastructure for string param type. The devlink param infrastructure doesn't handle copying the string data correctly. The first two patches fix it and the third patch adds helper function to safely copy string value without exceeding DEVLINK_PARAM_MAX_STRING_VALUE. ==================== Signed-off-by: -
Moshe Shemesh authored
Devlink string param buffer is allocated at the size of DEVLINK_PARAM_MAX_STRING_VALUE. Add helper function which makes sure this size is not exceeded. Renamed DEVLINK_PARAM_MAX_STRING_VALUE to __DEVLINK_PARAM_MAX_STRING_VALUE to emphasize that it should be used by devlink only. The driver should use the helper function instead to verify it doesn't exceed the allowed length. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
Driverinit configuration mode value is held by devlink to enable the driver fetch the value after reload command. In case the param type is string devlink should copy the value from driver string buffer to devlink string buffer on devlink_param_driverinit_value_set() and vice-versa on devlink_param_driverinit_value_get(). Fixes: ec01aeb1 ("devlink: Add support for get/set driverinit value") Signed-off-by:
-
Moshe Shemesh authored
In case devlink param type is string, it needs to copy the string value it got from the input to devlink_param_value. Fixes: e3b7ca18 ("devlink: Add param set command") Signed-off-by:
-
- 09 Oct, 2018 5 commits
-
-
David S. Miller authored
Arthur Kiyanovski says: ==================== minor bug fixes for ENA Ethernet driver Arthur Kiyanovski (4): net: ena: fix warning in rmmod caused by double iounmap net: ena: fix rare bug when failed restart/resume is followed by driver removal net: ena: fix NULL dereference due to untimely napi initialization net: ena: fix auto casting to boolean ==================== Signed-off-by: -
Arthur Kiyanovski authored
Eliminate potential auto casting compilation error. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Arthur Kiyanovski authored
napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
-
Arthur Kiyanovski authored
In a rare scenario when ena_device_restore() fails, followed by device remove, an FLR will not be issued. In this case, the device will keep sending asynchronous AENQ keep-alive events, even after driver removal, leading to memory corruption. Fixes: 8c5c7abd ("net: ena: add power management ops to the ENA driver") Signed-off-by:
-
Arthur Kiyanovski authored
Memory mapped with devm_ioremap is automatically freed when the driver is disconnected from the device. Therefore there is no need to explicitly call devm_iounmap. Fixes: 0857d92f ("net: ena: add missing unmap bars on device removal") Fixes: 411838e7 ("net: ena: fix rare kernel crash when bar memory remap fails") Signed-off-by:
-
- 08 Oct, 2018 13 commits
-
-
David Howells authored
The rxrpc_input_packet() function and its call tree was built around the assumption that data_ready() handler called from UDP to inform a kernel service that there is data to be had was non-reentrant. This means that certain locking could be dispensed with. This, however, turns out not to be the case with a multi-queue network card that can deliver packets to multiple cpus simultaneously. Each of those cpus can be in the rxrpc_input_packet() function at the same time. Fix by adding or changing some structure members: (1) Add peer->rtt_input_lock to serialise access to the RTT buffer. (2) Make conn->service_id into a 32-bit variable so that it can be cmpxchg'd on all arches. (3) Add call->input_lock to serialise access to the Rx/Tx state. Note that although the Rx and Tx states are (almost) entirely separate, there's no point completing the separation and having separate locks since it's a bi-phasal RPC protocol rather than a bi-direction streaming protocol. Data transmission and data reception do not take place simultaneously on any particular call. and making the following functional changes: (1) In rxrpc_input_data(), hold call->input_lock around the core to prevent simultaneous producing of packets into the Rx ring and updating of tracking state for a particular call. (2) In rxrpc_input_ping_response(), only read call->ping_serial once, and check it before checking RXRPC_CALL_PINGING as that's a cheaper test. The bit test and bit clear can then be combined. No further locking is needed here. (3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of the ACK packet. The superseded ACK check is then done both before and after the lock is taken. The handing of ackinfo data is split, parsing before the lock is taken and processing with it held. This is keyed on rxMTU being non-zero. Congestion management is also done within the locked section. (4) In rxrpc_input_ackall(), take call->input_lock around the Tx window rotation. The ACKALL packet carries no information and is only really useful after all packets have been transmitted since it's imprecise. (5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to prevent calls being simultaneously implicitly ended on two cpus and also to prevent any races with incoming call setup. (6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade on a connection. It is only permitted to happen once for a connection. (7) In rxrpc_new_incoming_call(), we have to recheck the routing inside rx->incoming_lock to see if someone else set up the call, connection or peer whilst we were getting there. We can't trust the values from the earlier routing check unless we pin refs on them - which we want to avoid. Further, we need to allow for an incoming call to have its state changed on another CPU between us making it live and us adjusting it because the conn is now in the RXRPC_CONN_SERVICE state. (8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access to the RTT buffer. Don't need to lock around setting peer->rtt. For reference, the inventory of state-accessing or state-altering functions used by the packet input procedure is: > rxrpc_input_packet() * PACKET CHECKING * ROUTING > rxrpc_post_packet_to_local() > rxrpc_find_connection_rcu() - uses RCU > rxrpc_lookup_peer_rcu() - uses RCU > rxrpc_find_service_conn_rcu() - uses RCU > idr_find() - uses RCU * CONNECTION-LEVEL PROCESSING - Service upgrade - Can only happen once per conn ! Changed to use cmpxchg > rxrpc_post_packet_to_conn() - Setting conn->hi_serial - Probably safe not using locks - Maybe use cmpxchg * CALL-LEVEL PROCESSING > Old-call checking > rxrpc_input_implicit_end_call() > rxrpc_call_completed() > rxrpc_queue_call() ! Need to take rx->incoming_lock > __rxrpc_disconnect_call() > rxrpc_notify_socket() > rxrpc_new_incoming_call() - Uses rx->incoming_lock for the entire process - Might be able to drop this earlier in favour of the call lock > rxrpc_incoming_call() ! Conflicts with rxrpc_input_implicit_end_call() > rxrpc_send_ping() - Don't need locks to check rtt state > rxrpc_propose_ACK * PACKET DISTRIBUTION > rxrpc_input_call_packet() > rxrpc_input_data() * QUEUE DATA PACKET ON CALL > rxrpc_reduce_call_timer() - Uses timer_reduce() ! Needs call->input_lock() > rxrpc_receiving_reply() ! Needs locking around ack state > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_proto_abort() > rxrpc_input_dup_data() - Fills the Rx buffer - rxrpc_propose_ACK() - rxrpc_notify_socket() > rxrpc_input_ack() * APPLY ACK PACKET TO CALL AND DISCARD PACKET > rxrpc_input_ping_response() - Probably doesn't need any extra locking ! Need READ_ONCE() on call->ping_serial > rxrpc_input_check_for_lost_ack() - Takes call->lock to consult Tx buffer > rxrpc_peer_add_rtt() ! Needs to take a lock (peer->rtt_input_lock) ! Could perhaps manage with cmpxchg() and xadd() instead > rxrpc_input_requested_ack - Consults Tx buffer ! Probably needs a lock > rxrpc_peer_add_rtt() > rxrpc_propose_ack() > rxrpc_input_ackinfo() - Changes call->tx_winsize ! Use cmpxchg to handle change ! Should perhaps track serial number - Uses peer->lock to record MTU specification changes > rxrpc_proto_abort() ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_input_soft_acks() - Consults the Tx buffer > rxrpc_congestion_management() - Modifies the Tx annotations ! Needs call->input_lock() > rxrpc_queue_call() > rxrpc_input_abort() * APPLY ABORT PACKET TO CALL AND DISCARD PACKET > rxrpc_set_call_completion() > rxrpc_notify_socket() > rxrpc_input_ackall() * APPLY ACKALL PACKET TO CALL AND DISCARD PACKET ! Need to take call->input_lock > rxrpc_rotate_tx_window() > rxrpc_end_tx_phase() > rxrpc_reject_packet() There are some functions used by the above that queue the packet, after which the procedure is terminated: - rxrpc_post_packet_to_local() - local->event_queue is an sk_buff_head - local->processor is a work_struct - rxrpc_post_packet_to_conn() - conn->rx_queue is an sk_buff_head - conn->processor is a work_struct - rxrpc_reject_packet() - local->reject_queue is an sk_buff_head - local->processor is a work_struct And some that offload processing to process context: - rxrpc_notify_socket() - Uses RCU lock - Uses call->notify_lock to call call->notify_rx - Uses call->recvmsg_lock to queue recvmsg side - rxrpc_queue_call() - call->processor is a work_struct - rxrpc_propose_ACK() - Uses call->lock to wrap __rxrpc_propose_ACK() And a bunch that complete a call, all of which use call->state_lock to protect the call state: - rxrpc_call_completed() - rxrpc_set_call_completion() - rxrpc_abort_call() - rxrpc_proto_abort() - Also uses rxrpc_queue_call() Fixes: 17926a79 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by:David Howells <dhowells@redhat.com>
-
David Howells authored
Fix the rxrpc_tx_packet trace line by storing the where parameter. Fixes: 4764c0da ("rxrpc: Trace packet transmission") Signed-off-by:
-
David Howells authored
Fix connection-level abort handling to cache the abort and error codes properly so that a new incoming call can be properly aborted if it races with the parent connection being aborted by another CPU. The abort_code and error parameters can then be dropped from rxrpc_abort_calls(). Fixes: f5c17aae ("rxrpc: Calls should only have one terminal state") Signed-off-by:
-
David Howells authored
Move the out-of-order and duplicate ACK packet check to before the call to rxrpc_input_ackinfo() so that the receive window size and MTU size are only checked in the latest ACK packet and don't regress. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
David Howells authored
Carry the call state out of the locked section in rxrpc_rotate_tx_window() rather than sampling it afterwards. This is only used to select tracepoint data, but could have changed by the time we do the tracepoint. Signed-off-by: -
David Howells authored
We should only call the function to end a call's Tx phase if we rotated the marked-last packet out of the transmission buffer. Make rxrpc_rotate_tx_window() return an indication of whether it just rotated the packet marked as the last out of the transmit buffer, carrying the information out of the locked section in that function. We can then check the return value instead of examining RXRPC_CALL_TX_LAST. Fixes: 70790dbe ("rxrpc: Pass the last Tx packet marker in the annotation buffer") Signed-off-by:
-
David Howells authored
We don't need to take the RCU read lock in the rxrpc packet receive function because it's held further up the stack in the IP input routine around the UDP receive routines. Fix this by dropping the RCU read lock calls from rxrpc_input_packet(). This simplifies the code. Fixes: 70790dbe ("rxrpc: Pass the last Tx packet marker in the annotation buffer") Signed-off-by:
-
David Howells authored
Use the UDP encap_rcv hook to cut the bit out of the rxrpc packet reception in which a packet is placed onto the UDP receive queue and then immediately removed again by rxrpc. Going via the queue in this manner seems like it should be unnecessary. This does, however, require the invention of a value to place in encap_type as that's one of the conditions to switch packets out to the encap_rcv hook. Possibly the value doesn't actually matter for anything other than sockopts on the UDP socket, which aren't accessible outside of rxrpc anyway. This seems to cut a bit of time out of the time elapsed between each sk_buff being timestamped and turning up in rxrpc (the final number in the following trace excerpts). I measured this by making the rxrpc_rx_packet trace point print the time elapsed between the skb being timestamped and the current time (in ns), e.g.: ... 424.278721: rxrpc_rx_packet: ... ACK 25026 So doing a 512MiB DIO read from my test server, with an unmodified kernel: N min max sum mean stddev 27605 2626 7581 7.83992e+07 2840.04 181.029 and with the patch applied: N min max sum mean stddev 27547 1895 12165 6.77461e+07 2459.29 255.02 Signed-off-by: -
David S. Miller authored
Eugene Syromiatnikov says: ==================== net/smc: userspace breakage fixes These two patches correct some userspace-affecting issues introduced during 4.19 development cycle, specifically: * New structure "struct smcd_diag_dmbinfo" has been defined in a way that would lead to different layout of the structure on most 32-bit ABIs in comparison with layout on 64-bit ABIs; * One of the commits renamed an UAPI-exposed field name. Changes since v1: * Managed not to forget to add --cover-letter. * Commit ID format in commit message has been changed in accordance with Sergei Shtylyov's recommendations. ==================== Signed-off-by: -
Eugene Syromiatnikov authored
Commit c601171d ("net/smc: provide smc mode in smc_diag.c") changed the name of diag_fallback field of struct smc_diag_msg structure to diag_mode. However, this structure is a part of UAPI, and this change breaks user space applications that use it ([1], for example). Since the new name is more suitable, convert the field to a union that provides access to the data via both the new and the old name. [1] https://gitlab.com/strace/strace/blob/v4.24/netlink_smc_diag.c#L165 Fixes: c601171d ("net/smc: provide smc mode in smc_diag.c") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by:
-
Eugene Syromiatnikov authored
Commit 4b1b7d3b ("net/smc: add SMC-D diag support") introduced new UAPI-exposed structure, struct smcd_diag_dmbinfo. However, it's not usable by compat binaries, as it has different layout there. Probably, the most straightforward fix that will avoid similar issues in the future is to use __aligned_u64 for 64-bit fields. Fixes: 4b1b7d3b ("net/smc: add SMC-D diag support") Signed-off-by:
-
Al Viro authored
cls_u32.c misuses refcounts for struct tc_u_hnode - it counts references via ->hlist and via ->tp_root together. u32_destroy() drops the former and, in case when there had been links, leaves the sucker on the list. As the result, there's nothing to protect it from getting freed once links are dropped. That also makes the "is it busy" check incapable of catching the root hnode - it *is* busy (there's a reference from tp), but we don't see it as something separate. "Is it our root?" check partially covers that, but the problem exists for others' roots as well. AFAICS, the minimal fix preserving the existing behaviour (where it doesn't include oopsen, that is) would be this: * count tp->root and tp_c->hlist as separate references. I.e. have u32_init() set refcount to 2, not 1. * in u32_destroy() we always drop the former; in u32_destroy_hnode() - the latter. That way we have *all* references contributing to refcount. List removal happens in u32_destroy_hnode() (called only when ->refcnt is 1) an in u32_destroy() in case of tc_u_common going away, along with everything reachable from it. IOW, that way we know that u32_destroy_key() won't free something still on the list (or pointed to by someone's ->root). Reproducer: tc qdisc add dev eth0 ingress tc filter add dev eth0 parent ffff: protocol ip prio 100 handle 1: \ u32 divisor 1 tc filter add dev eth0 parent ffff: protocol ip prio 200 handle 2: \ u32 divisor 1 tc filter add dev eth0 parent ffff: protocol ip prio 100 \ handle 1:0:11 u32 ht 1: link 801: offset at 0 mask 0f00 shift 6 \ plus 0 eat match ip protocol 6 ff tc filter delete dev eth0 parent ffff: protocol ip prio 200 tc filter change dev eth0 parent ffff: protocol ip prio 100 \ handle 1:0:11 u32 ht 1: link 0: offset at 0 mask 0f00 shift 6 plus 0 \ eat match ip protocol 6 ff tc filter delete dev eth0 parent ffff: protocol ip prio 100 Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jiri Kosina authored
Commit 2276f58a ("udp: use a separate rx queue for packet reception") turned static inline __skb_recv_udp() from being a trivial helper around __skb_recv_datagram() into a UDP specific implementaion, making it EXPORT_SYMBOL_GPL() at the same time. There are external modules that got broken by __skb_recv_udp() not being visible to them. Let's unbreak them by making __skb_recv_udp EXPORT_SYMBOL(). Rationale (one of those) why this is actually "technically correct" thing to do: __skb_recv_udp() used to be an inline wrapper around __skb_recv_datagram(), which itself (still, and correctly so, I believe) is EXPORT_SYMBOL(). Cc: Paolo Abeni <pabeni@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 2276f58a ("udp: use a separate rx queue for packet reception") Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
- 06 Oct, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman authored
Dave writes: "Networking fixes: 1) Fix truncation of 32-bit right shift in bpf, from Jann Horn. 2) Fix memory leak in wireless wext compat, from Stefan Seyfried. 3) Use after free in cfg80211's reg_process_hint(), from Yu Zhao. 4) Need to cancel pending work when unbinding in smsc75xx otherwise we oops, also from Yu Zhao. 5) Don't allow enslaving a team device to itself, from Ido Schimmel. 6) Fix backwards compat with older userspace for rtnetlink FDB dumps. From Mauricio Faria. 7) Add validation of tc policy netlink attributes, from David Ahern. 8) Fix RCU locking in rawv6_send_hdrinc(), from Wei Wang." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: mvpp2: Extract the correct ethtype from the skb for tx csum offload ipv6: take rcu lock in rawv6_send_hdrinc() net: sched: Add policy validation for tc attributes rtnetlink: fix rtnl_fdb_dump() for ndmsg header yam: fix a missing-check bug net: bpfilter: Fix type cast and pointer warnings net: cxgb3_main: fix a missing-check bug bpf: 32-bit RSH verification must truncate input before the ALU op net: phy: phylink: fix SFP interface autodetection be2net: don't flip hw_features when VXLANs are added/deleted net/packet: fix packet drop as of virtio gso net: dsa: b53: Keep CPU port as tagged in all VLANs openvswitch: load NAT helper bnxt_en: get the reduced max_irqs by the ones used by RDMA bnxt_en: free hwrm resources, if driver probe fails. bnxt_en: Fix enables field in HWRM_QUEUE_COS2BW_CFG request bnxt_en: Fix VNIC reservations on the PF. team: Forbid enslaving team device to itself net/usb: cancel pending work when unbinding smsc75xx mlxsw: spectrum: Delete RIF when VLAN device is removed ...
-
- 05 Oct, 2018 1 commit
-
-
Greg Kroah-Hartman authored
* akpm: mm: madvise(MADV_DODUMP): allow hugetlbfs pages ocfs2: fix locking for res->tracking and dlm->tracking_list mm/vmscan.c: fix int overflow in callers of do_shrink_slab() mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly mm/vmstat.c: fix outdated vmstat_text proc: restrict kernel stack dumps to root mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes mm/migrate.c: split only transparent huge pages when allocation fails ipc/shm.c: use ERR_CAST() for shm_lock() error return mm/gup_benchmark: fix unsigned comparison to zero in __gup_benchmark_ioctl mm, thp: fix mlocking THP page with migration enabled ocfs2: fix crash in ocfs2_duplicate_clusters_by_page() hugetlb: take PMD sharing into account when flushing tlb/caches mm: migration: fix migration of huge PMD shared pages
-
