Pull sbp-2 (firewire) target mode support from Nicholas Bellinger:
 "The FireWire SBP-2 Target is a driver for using an IEEE-1394
  connection as a SCSI transport.  This module uses the SCSI Target
  framework to expose LUNs to other machines attached to a FireWire bus,
  in effect acting as a FireWire hard disk similar to FireWire Target
  Disk mode on many Apple computers.

  Also included are the two drivers/firewire/ patches required by
  sbp-target to access fw_request fabric speed needed for mgt_agent
  TCODE_WRITE_BLOCK_REQUEST ops, and exporting fw_card kref logic used
  when creating/destroying active session references to individual
  endpoints.

  A credit goes to Chris in being able to get this code up and running
  so quickly w/o any target core changes, and special thanks goes out to
  Stefan Richter + Clemens Ladisch + Andy Grover for their help in
  getting this driver ready for mainline.  Also, one of Chris's goals
  was to be able to connect sbp-target to a PowerPC based MacOS-X based
  client, that he accomplished along the way in this obligatory
  screenshot:

    http://linux-iscsi.org/wiki/File:Linux-fireware-target-bootc-macosx.png

  Great work Chris + linux-1394 team !!"
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

* 'sbp-target-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  sbp-target: Initial merge of firewire/ieee-1394 target mode support
  firewire: Move fw_card kref functions into linux/firewire.h
  firewire: Add function to get speed from opaque struct fw_request

Pull crypto updates from Herbert Xu:
 - New cipher/hash driver for ARM ux500.
 - Code clean-up for aesni-intel.
 - Misc fixes.

Fixed up conflicts in arch/arm/mach-ux500/devices-common.h, where quite
frankly some of it made no sense at all (the pull brought in a
declaration for the dbx500_add_platform_device_noirq() function, which
neither exists nor is used anywhere).

Also some trivial add-add context conflicts in the Kconfig file in
drivers/{char/hw_random,crypto}/

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni-intel - move more common code to ablk_init_common
  crypto: aesni-intel - use crypto_[un]register_algs
  crypto: ux500 - Cleanup hardware identification
  crypto: ux500 - Update DMA handling for 3.4
  mach-ux500: crypto - core support for CRYP/HASH module.
  crypto: ux500 - Add driver for HASH hardware
  crypto: ux500 - Add driver for CRYP hardware
  hwrng: Kconfig - modify default state for atmel-rng driver
  hwrng: omap - use devm_request_and_ioremap
  crypto: crypto4xx - move up err_request_irq label
  crypto, xor: Sanitize checksumming function selection output
  crypto: caam - add backward compatible string sec4.0

Pull first set of watchdog updates from Wim Van Sebroeck:
 "This pull contains:

   - The removal of ixp2000_wdt
   - The addition of ie6xx_wdt
   - Some documentation fixes
   - Small fixes and improvements

  (Note: Part 2 will contain generic watchdog core changes + conversion
  of some more drivers)"

* git://www.linux-watchdog.org/linux-watchdog:
  Documentation/watchdog: Fix the file descriptor leak when no cmdline arg given
  Documentation/watchdog: close the fd when cmdline arg given
  Documentation/watchdog: Fix a small typo
  watchdog: s3c2410_wdt: Set timeout to actually achieved timeout
  watchdog: wm831x: Convert to gpio_request_one()
  watchdog: via_wdt: depends on PCI
  watchdog: ie6xx_wdt needs io.h
  watchdog: ie6xx_wdt.c: fix printk format warning
  watchdog: Add watchdog driver for Intel Atom E6XX
  watchdog: it87_wdt: Add support for IT8728F watchdog.
  watchdog: i6300esb: don't depend on X86
  watchdog: Use module_pci_driver
  watchdog: sch311x_wdt.c: Remove RESGEN
  watchdog: s3c2410-wdt: Use of_match_ptr().
  watchdog: Device tree support for pnx4008-wdt
  watchdog: ar7_wdt.c: use devm_request_and_ioremap
  watchdog: remove ixp2000 driver
  watchdog: sp5100_tco.c: quiet sparse noise about using plain integer was NULL pointer

Pull libata update from Jeff Garzik:
 "Changes, all of them boring and minor:

  1) Ugly MSFT Hyper-V workaround in ata_piix

  2) Fix a longstanding error recovery delay caused by excessive
     re-re-retries, when media errors occur.

  3) Minor hw-specific workarounds and quirks

  4) New PATA driver for ep93xx"

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  PATA host controller driver for ep93xx
  [libata] Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist
  ata_generic: Skip is_intel_ider() check when ata_generic=1 is set
  libata-eh don't waste time retrying media errors (v3)
  ata_piix: defer disks to the Hyper-V drivers by default
  libata: add a host flag to ignore detected ATA devices

Pull hwmon updates from Guenter Roeck:
 "New driver for INA219 and INA226, added support for IT8782F and
  IT8783E/F to it87 driver, plus cleanups in a couple of drivers."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (it87) Make temp3 attribute conditional for IT8782F
  hwmon: (it87) Convert to use devm_kzalloc and devm_request_region
  hwmon: INA219 and INA226 support
  hwmon: (it87) Create voltage attributes only if voltage is enabled
  hwmon: (ntc_thermistor) Fix checkpatch warning
  hwmon: (ntc_thermistor) Optimize and fix build warning
  hwmon: (ntc_thermistor) Return error code from hwmon_device_register
  hwmon: (ntc_thermistor) Convert to devm_kzalloc
  hwmon: (ad7314) Remove unused defines, and rename OFFSET to SHIFT
  acpi_power_meter: clean up code around setup_attrs
  acpi_power_meter: drop meter_rw_attrs, use common meter_attrs
  acpi_power_meter: remove duplicate code between register_{ro,rw}_attrs
  acpi_power_meter: use a {RW,RO}_SENSOR_TEMPLATE macro to clean things up
  acpi_power_meter: use the same struct {rw,ro}_sensor_template for both
  hwmon: use module_pci_driver
  hwmon: (it87) Add support for IT8782F and IT8783E/F

Pull power management updates from Rafael Wysocki:

 - Implementation of opportunistic suspend (autosleep) and user space
   interface for manipulating wakeup sources.

 - Hibernate updates from Bojan Smojver and Minho Ban.

 - Updates of the runtime PM core and generic PM domains framework
   related to PM QoS.

 - Assorted fixes.

* tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  epoll: Fix user space breakage related to EPOLLWAKEUP
  PM / Domains: Make it possible to add devices to inactive domains
  PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format
  PM / Domains: Fix computation of maximum domain off time
  PM / Domains: Fix link checking when add subdomain
  PM / Sleep: User space wakeup sources garbage collector Kconfig option
  PM / Sleep: Make the limit of user space wakeup sources configurable
  PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo
  PM / Domains: Cache device stop and domain power off governor results, v3
  PM / Domains: Make device removal more straightforward
  PM / Sleep: Fix a mistake in a conditional in autosleep_store()
  epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready
  PM / QoS: Create device constraints objects on notifier registration
  PM / Runtime: Remove device fields related to suspend time, v2
  PM / Domains: Rework default domain power off governor function, v2
  PM / Domains: Rework default device stop governor function, v2
  PM / Sleep: Add user space interface for manipulating wakeup sources, v3
  PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources
  PM / Sleep: Implement opportunistic sleep, v2
  PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
  ...

Pull a regmap kconfig dependency fix from Mark Brown:
 "Fix the dependency on IRQ_DOMAIN for REGMAP_IRQ in the core

  Fixes a missing select from the Palmas driver a bit more throoughly."

* tag 'regmap-domain-deps' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Use select .. if to get IRQ_DOMAIN enabled

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...

Merge tag 'ktest-v3.5-spelling' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull trivial ktest spelling fix from Steven Rostedt:
 "I promised Jesper that I would push this for 3.5, but forgot to add it
  to my queue.  It's just a spelling fix, but it should go in regardless
  to hide my inability to get words in the English language correct."

Becuse gud spealing is impurtunt.

* tag 'ktest-v3.5-spelling' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Change singular "paranthesis" to plural "parentheses"

Merge branches 'perf-urgent-for-linus' and 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:

 - Leftover AMD PMU driver fix fix from the end of the v3.4
   stabilization cycle.

 - Late tools/perf/ changes that missed the first round:
    * endianness fixes
    * event parsing improvements
    * libtraceevent fixes factored out from trace-cmd
    * perl scripting engine fixes related to libtraceevent,
    * testcase improvements
    * perf inject / pipe mode fixes
    * plus a kernel side fix

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Update event scheduling constraints for AMD family 15h models

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "sched, perf: Use a single callback into the scheduler"
  perf evlist: Show event attribute details
  perf tools: Bump default sample freq to 4 kHz
  perf buildid-list: Work better with pipe mode
  perf tools: Fix piped mode read code
  perf inject: Fix broken perf inject -b
  perf tools: rename HEADER_TRACE_INFO to HEADER_TRACING_DATA
  perf tools: Add union u64_swap type for swapping u64 data
  perf tools: Carry perf_event_attr bitfield throught different endians
  perf record: Fix documentation for branch stack sampling
  perf target: Add cpu flag to sample_type if target has cpu
  perf tools: Always try to build libtraceevent
  perf tools: Rename libparsevent to libtraceevent in Makefile
  perf script: Rename struct event to struct event_format in perl engine
  perf script: Explicitly handle known default print arg type
  perf tools: Add hardcoded name term for pmu events
  perf tools: Separate 'mem:' event scanner bits
  perf tools: Use allocated list for each parsed event
  perf tools: Add support for displaying event parser debug info
  perf test: Move parse event automated tests to separated object

Pull Itanium fixes from Tony Luck.

* tag 'ia64-3.5-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Liberate the signal layer from IA64 assembler
  [IA64] Add cmpxchg.h to exported userspace headers
  [IA64] Fix fast syscall version of getcpu()
  [IA64] Removed "task_size" element from thread_struct - it is now constant

Pull x86 reboot changes from Ingo Molnar:
 "The biggest change is a gentler method of rebooting/stopping via IRQs
  first and then via NMIs.  There are several cleanups in the tree as
  well."

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Update nonmi_ipi parameter
  x86/reboot: Use NMI to assist in shutting down if IRQ fails
  Revert "x86, reboot: Use NMI instead of REBOOT_VECTOR to stop cpus"
  x86/reboot: Clean up coding style
  x86/reboot: Reduce to a single DMI table for reboot quirks

Pull x86 platform changes from Ingo Molnar:
 "This tree includes assorted platform driver updates and a preparatory
  series for a platform with custom DMA remapping semantics (sta2x11 I/O
  hub)."

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsmp: Fix number of CPUs when vsmp is disabled
  keyboard: Use BIOS Keyboard variable to set Numlock
  x86/olpc/xo1/sci: Report RTC wakeup events
  x86/olpc/xo1/sci: Produce wakeup events for buttons and switches
  x86, platform: Initial support for sta2x11 I/O hub
  x86: Introduce CONFIG_X86_DMA_REMAP
  x86-32: Introduce CONFIG_X86_DEV_DMA_OPS

Pull x86 mm changes from Ingo Molnar:
 "This tree includes a micro-optimization that avoids cr3 switches
  during idling; it fixes corner cases and there's also small cleanups"

Fix up trivial context conflict with the percpu_xx -> this_cpu_xx
changes.

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Fix accounting in kernel_physical_mapping_init()
  x86/tlb: Clean up and unify TLB_FLUSH_ALL definition
  x86: Drop obsolete ARCH_BOOTMEM support
  x86, tlb: Switch cr3 in leave_mm() only when needed
  x86/mm: Fix the size calculation of mapping tables

Pull MCE updates from Ingo Molnar:
 "This tree updates/fixes MCE hardware support, it makes the APIC LVT
  thresholding interrupt optional because a subset of AMD F15h models
  don't support it."

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, MCE, AMD: Disable error thresholding bank 4 on some models
  x86, MCE, AMD: Hide interrupt_enable sysfs node
  x86, MCE, AMD: Make APIC LVT thresholding interrupt optional

Pull fpu state cleanups from Ingo Molnar:
 "This tree streamlines further aspects of FPU handling by eliminating
  the prepare_to_copy() complication and moving that logic to
  arch_dup_task_struct().

  It also fixes the FPU dumps in threaded core dumps, removes and old
  (and now invalid) assumption plus micro-optimizes the exit path by
  avoiding an FPU save for dead tasks."

Fixed up trivial add-add conflict in arch/sh/kernel/process.c that came
in because we now do the FPU handling in arch_dup_task_struct() rather
than the legacy (and now gone) prepare_to_copy().

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, fpu: drop the fpu state during thread exit
  x86, xsave: remove thread_has_fpu() bug check in __sanitize_i387_state()
  coredump: ensure the fpu state is flushed for proper multi-threaded core dump
  fork: move the real prepare_to_copy() users to arch_dup_task_struct()

Pull exception table generation updates from Ingo Molnar:
 "The biggest change here is to allow the build-time sorting of the
  exception table, to speed up booting.  This is achieved by the
  architecture enabling BUILDTIME_EXTABLE_SORT.  This option is enabled
  for x86 and MIPS currently.

  On x86 a number of fixes and changes were needed to allow build-time
  sorting of the exception table, in particular a relocation invariant
  exception table format was needed.  This required the abstracting out
  of exception table protocol and the removal of 20 years of accumulated
  assumptions about the x86 exception table format.

  While at it, this tree also cleans up various other aspects of
  exception handling, such as early(er) exception handling for
  rdmsr_safe() et al.

  All in one, as the result of these changes the x86 exception code is
  now pretty nice and modern.  As an added bonus any regressions in this
  code will be early and violent crashes, so if you see any of those,
  you'll know whom to blame!"

Fix up trivial conflicts in arch/{mips,x86}/Kconfig files due to nearby
modifications of other core architecture options.

* 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  Revert "x86, extable: Disable presorted exception table for now"
  scripts/sortextable: Handle relative entries, and other cleanups
  x86, extable: Switch to relative exception table entries
  x86, extable: Disable presorted exception table for now
  x86, extable: Add _ASM_EXTABLE_EX() macro
  x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/xsave.h
  x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/kvm_host.h
  x86, extable: Remove the now-unused __ASM_EX_SEC macros
  x86, extable: Remove open-coded exception table entries in arch/x86/xen/xen-asm_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/um/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/usercopy_32.c
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/putuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/getuser.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/csum-copy_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_nocache_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_64.S
  x86, extable: Remove open-coded exception table entries in arch/x86/lib/checksum_32.S
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/test_rodata.c
  x86, extable: Remove open-coded exception table entries in arch/x86/kernel/entry_64.S
  ...

Pull x86 EFI updates from Ingo Molnar:
 "This patchset makes changes to the bzImage EFI header, so that it can
  be signed with a secure boot signature tool.  It should not affect
  anyone who is not using the EFI self-boot feature in any way."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Fix NumberOfRvaAndSizes field in PE32 header for EFI_STUB
  x86, efi: Fix .text section overlapping image header for EFI_STUB
  x86, efi: Fix issue of overlapping .reloc section for EFI_STUB

Pull x86/urgent branch from Ingo Molnar:
 "These are the fixes left over from the very end of the v3.4
  stabilization cycle, plus one more fix."

Ugh.  Those KERN_CONT additions are just pointless.  I think they came
as a reaction to some of the early (broken) printk() work - but that was
fixed before it was merged.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, relocs: Build clean fix
  x86, printk: Add missing KERN_CONT to NMI selftest
  x86: Fix boot on Twinhead H12Y

Merge branches 'x86-asm-for-linus', 'x86-cleanups-for-linus', 'x86-cpu-for-linus', 'x86-debug-for-linus' and 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull initial trivial x86 stuff from Ingo Molnar.

Various random cleanups and trivial fixes.

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Eliminate dead ia32 syscall handlers

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pci-calgary_64.c: Remove obsoleted simple_strtoul() usage
  x86: Don't continue booting if we can't load the specified initrd
  x86: kernel/dumpstack.c simple_strtoul cleanup
  x86: kernel/check.c simple_strtoul cleanup
  debug: Add CONFIG_READABLE_ASM
  x86: spinlock.h: Remove REG_PTR_MODE

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cache_info: Fix setup of l2/l3 ids

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Avoid double stack traces with show_regs()

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: microcode_core.c simple_strtoul cleanup

Pull Hexagon architecture changes from Richard Kuo:
 "These are mostly cleanups and feedback remaining from the original
  upstreaming."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  various Kconfig cleanup and old platform build code removal
  hexagon/mm/vm_fault.c: Port OOM changes to do_page_fault
  arch/hexagon/kernel/dma.c: make function static
  Remove unneeded include of version.h from arch/hexagon/include/asm/spinlock_types.h
  Hexagon: Use resource_size function

Pull powerpc updates from Benjamin Herrenschmidt:
 "Here are the powerpc goodies for 3.5.  Main highlights are:

   - Support for the NX crypto engine in Power7+
   - A bunch of Anton goodness, including some micro optimization of our
     syscall entry on Power7
   - I converted a pile of our thermal control drivers to the new i2c
     APIs (essentially turning the old therm_pm72 into a proper set of
     windfarm drivers).  That's one more step toward removing the
     deprecated i2c APIs, there's still a few drivers to fix, but we are
     getting close
   - kexec/kdump support for 47x embedded cores

  The big missing thing here is no updates from Freescale.  Not sure
  what's up here, but with Kumar not working for them anymore things are
  a bit in a state of flux in that area."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc: Fix irq distribution
  Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
  powerpc: Fixing a cputhread code documentation
  powerpc/crypto: Enable the PFO-based encryption device
  powerpc/crypto: Build files for the nx device driver
  powerpc/crypto: debugfs routines and docs for the nx device driver
  powerpc/crypto: SHA512 hash routines for nx encryption
  powerpc/crypto: SHA256 hash routines for nx encryption
  powerpc/crypto: AES-XCBC mode routines for nx encryption
  powerpc/crypto: AES-GCM mode routines for nx encryption
  powerpc/crypto: AES-ECB mode routines for nx encryption
  powerpc/crypto: AES-CTR mode routines for nx encryption
  powerpc/crypto: AES-CCM mode routines for nx encryption
  powerpc/crypto: AES-CBC mode routines for nx encryption
  powerpc/crypto: nx driver code supporting nx encryption
  powerpc/pseries: Enable the PFO-based RNG accelerator
  powerpc/pseries/hwrng: PFO-based hwrng driver
  powerpc/pseries: Add PFO support to the VIO bus
  powerpc/pseries: Add pseries update notifier for OFDT prop changes
  powerpc/pseries: Add new hvcall constants to support PFO
  ...

Pull UML updates from Richard Weinberger:
 "Most changes are bug fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: missing checks of __put_user()/__get_user() return values
  um: stub_rt_sigsuspend isn't needed these days anymore
  um/x86: merge (and trim) 32- and 64-bit variants of ptrace.h
  irq: Remove irq_chip->release()
  um: Remove CONFIG_IRQ_RELEASE_METHOD
  um: Remove usage of irq_chip->release()
  um: Implement um_free_irq()
  um: Fix __swp_type()
  um: Implement a custom pte_same() function
  um: Add BUG() to do_ops()'s error path
  um: Remove unused variables
  um: bury unused _TIF_RESTORE_SIGMASK
  um: wrong sigmask saved in case of multiple sigframes
  um: add TIF_NOTIFY_RESUME
  um: ->restart_block.fn needs to be reset on sigreturn

Pull SuperH updates from Paul Mundt:
 - New CPUs: SH7734 (SH-4A), SH7264 and SH7269 (SH-2A)
 - New boards: RSK2+SH7264, RSK2+SH7269
 - Unbreaking kgdb for SMP
 - Consolidation of _32/_64 page fault handling.
 - watchdog and legacy DMA chainsawing, part 1
 - Conversion to evt2irq() hwirq lookup, to support relocation of
   vectored IRQs for irqdomains.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (98 commits)
  sh: intc: Kill off special reservation interface.
  sh: Enable PIO API for hp6xx and se770x.
  sh: Kill off machvec IRQ hinting.
  sh: dma: More legacy cpu dma chainsawing.
  sh: Kill off MAX_DMA_ADDRESS leftovers.
  sh: Tidy up some of the cpu legacy dma header mess.
  sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a.
  sh64: Fix up vmalloc fault range check.
  Revert "sh: Ensure fixmap and store queue space can co-exist."
  serial: sh-sci: Fix for port types without BRI interrupts.
  sh: legacy PCI evt2irq migration.
  sh: cpu dma evt2irq migration.
  sh: sh7763rdp evt2irq migration.
  sh: sdk7780 evt2irq migration.
  sh: migor evt2irq migration.
  sh: landisk evt2irq migration.
  sh: kfr2r09 evt2irq migration.
  sh: ecovec24 evt2irq migration.
  sh: ap325rxa evt2irq migration.
  sh: urquell evt2irq migration.
  ...

This reverts commit cb04ff9a ("sched, perf: Use a single
callback into the scheduler").

Before this change was introduced, the process switch worked
like this (wrt. to perf event schedule):

     schedule (prev, next)
       - schedule out all perf events for prev
       - switch to next
       - schedule in all perf events for current (next)

After the commit, the process switch looks like:

     schedule (prev, next)
       - schedule out all perf events for prev
       - schedule in all perf events for (next)
       - switch to next

The problem is, that after we schedule perf events in, the pmu
is enabled and we can receive events even before we make the
switch to next - so "current" still being prev process (event
SAMPLE data are filled based on the value of the "current"
process).

Thats exactly what we see for test__PERF_RECORD test. We receive
SAMPLES with PID of the process that our tracee is scheduled
from.

Discussed with Peter Zijlstra:

 > Bah!, yeah I guess reverting is the right thing for now. Sad
 > though.
 >
 > So by having the two hooks we have a black-spot between them
 > where we receive no events at all, this black-spot covers the
 > hand-over of current and we thus don't receive the 'wrong'
 > events.
 >
 > I rather liked we could do away with both that black-spot and
 > clean up the code a little, but apparently people rely on it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Cc: paulus@samba.org
Cc: cjashfor@linux.vnet.ibm.com
Cc: fweisbec@gmail.com
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20120523111302.GC1638@m.brq.redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

we start a infinite loop when user gives ./watchdog-test, and when user
ctrl + c's the program, we just exit immeadiately with out closing the
filedescriptor of the watchdog device. a signal handler is used to
do the job of closing the filedescriptor and exiting the program.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

in the watchdog test code, the ioctl is performed on the watchdog device
and just doing exit(0) so we leak a filedescripor.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

While rebasing my "watchdog_dev: Let the driver update the timeout field on
set_timeout success" patch (before I noticed it was already picked up by Wim),
I noticed that the s3c2410_wdt driver may not always have a 1 second
resolution, this patch changes s3c2410wdt_set_heartbeat to update the
timeout to the actually achieved timeout.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use the more modern API.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

via_wdt is a PCI driver so it should depend on PCI so that
it will not cause build errors.

drivers/watchdog/via_wdt.c:256:1: warning: data definition has no type or storage class
drivers/watchdog/via_wdt.c:256:1: warning: type defaults to 'int' in declaration of 'module_pci_driver'
drivers/watchdog/via_wdt.c:256:1: warning: parameter names (without types) in function declaration
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Fix build error by including <linux/io.h>:

drivers/watchdog/ie6xx_wdt.c:97:2: error: implicit declaration of function 'outb'
drivers/watchdog/ie6xx_wdt.c:133:2: error: implicit declaration of function 'outl'
drivers/watchdog/ie6xx_wdt.c:161:2: error: implicit declaration of function 'inb'
drivers/watchdog/ie6xx_wdt.c:199:3: error: implicit declaration of function 'inl'
drivers/watchdog/ie6xx_wdt.c:203:3: error: implicit declaration of function 'inw'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Fix printk format warning; use cast to u64 since resource_size_t can
be either u32 or u64.

drivers/watchdog/ie6xx_wdt.c:261:4: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add driver for the watchdog timer built into the
Intel Atom E6XX (TunnelCreek) processor.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This works the same way IT8721F works, but it supports WDT_PWROK
(checked on the datasheet).
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

i6300esb is on of the watchdogs QEMU can emulate. It is also available
when emulating ARM. The driver works without problems and is quite
useful to test userspace dealing with /dev/watchdog.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This patch converts the PCI watchdog drivers so that they use the
module_pci_driver() macro. This makes the code smaller and simpler.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Thomas Mingarelli <thomas.mingarelli@hp.com>
Cc: Marc Vertes <marc.vertes@sigfox.com>

Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The SCH311x chip contains 2 watchdogs. One is the watchdog programmable
by the runtime register at address 0x65-0x68, the other is the watchdog
inside the power on reset generator. This second watchdog has a fixed
timeout value of ~1.6 seconds and is configurable only by the RESGEN
register.

The BIOS normally takes care of the RESGEN watchdog and disables it (at
least) before the OS is booted.

Unfortunately the sch311x_wdt driver clears bit 0 of the RESGEN register
which has the effect that at the latest 1.6 seconds later, a POR is
triggered.

The attached patch fixes this problem by completely removing any
reference to the RESGEN watchdog from the sch311x_wdt driver.
Signed-off-by: Dave Mueller <d.mueller@elsoft.ch>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use of_match_ptr definition for the of_match_table.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>