- 27 Aug, 2022 3 commits
-
-
Kai-Heng Feng authored
Commit d60cd063 ("PM: ACPI: reboot: Use S5 for reboot") caused a reboot hang on one Dell servers so the commit was reverted. Someone managed to collect the AER log and it's caused by MSI: [ 148.762067] ACPI: Preparing to enter system sleep state S5 [ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5 [ 148.803731] {1}[Hardware Error]: event severity: recoverable [ 148.810191] {1}[Hardware Error]: Error 0, type: fatal [ 148.816088] {1}[Hardware Error]: section_type: PCIe error [ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point [ 148.829026] {1}[Hardware Error]: version: 3.0 [ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010 [ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0 [ 148.847309] {1}[Hardware Error]: slot: 0 [ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00 [ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f [ 148.865145] {1}[Hardware Error]: class_code: 020000 [ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000 [ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030 [ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000 [ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000 [ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First) [ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID [ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030 [ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000 The MSI is probably raised by incoming packets, so power down the device and disable bus mastering to stop the traffic, as user confirmed this approach works. In addition to that, be extra safe and cancel reset task if it's running. Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/ BugLink: https://bugs.launchpad.net/bugs/1917471Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220826002530.1153296-1-kai.heng.feng@canonical.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Casper Andersson authored
Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would have the checksum included up to next multiple of 4 (a 77 bytes packet would have 3 bytes of ethernet checksum included). The check for the value expects it in host (Little) endian. Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support") Signed-off-by:
Casper Andersson <casper.casan@gmail.com> Reviewed-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20220825084955.684637-1-casper.casan@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix handling of duplicate connection handle - Fix handling of HCI vendor opcode - Fix suspend performance regression - Fix build errors - Fix not handling shutdown condition on ISO sockets - Fix double free issue * tag 'for-net-2022-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: hold hdev->lock when cleanup hci_conn Bluetooth: move from strlcpy with unused retval to strscpy Bluetooth: hci_event: Fix checking conn for le_conn_complete_evt Bluetooth: ISO: Fix not handling shutdown condition Bluetooth: hci_sync: fix double mgmt_pending_free() in remove_adv_monitor() Bluetooth: MGMT: Fix Get Device Flags Bluetooth: L2CAP: Fix build errors in some archs Bluetooth: hci_sync: Fix suspend performance regression Bluetooth: hci_event: Fix vendor (unknown) opcode status handling ==================== Link: https://lore.kernel.org/r/20220825234559.1837409-1-luiz.dentz@gmail.comSigned-off-by:
-
- 26 Aug, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel borkmann says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 14 day(s) which contain a total of 13 files changed, 61 insertions(+), 24 deletions(-). The main changes are: 1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi. 2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger. 3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu. 4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui. 5) Fix range tracking for array poke descriptors, from Daniel Borkmann. 6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson. 7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian. 8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima. 9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
Johannes Berg says: ==================== pull-request: wireless-2022-08-26 Here are a couple of fixes for the current cycle, see the tag description below. Just a couple of fixes: * two potential leaks * use-after-free in certain scan races * warning in IBSS code * error return from a debugfs file was wrong * possible NULL-ptr-deref when station lookup fails Please pull and let me know if there's any problem. ==================== Signed-off-by:
-
- 25 Aug, 2022 35 commits
-
-
Zhengping Jiang authored
When disconnecting all devices, hci_conn_failed is used to cleanup hci_conn object when the hci_conn object cannot be aborted. The function hci_conn_failed requires the caller holds hdev->lock. Fixes: 9b3628d7 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by:
Zhengping Jiang <jiangzp@google.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Archie Pusaka authored
To prevent multiple conn complete events, we shouldn't look up the conn with hci_lookup_le_connect, since it requires the state to be BT_CONNECT. By the time the duplicate event is processed, the state might have changed, so we end up processing the new event anyway. Change the lookup function to hci_conn_hash_lookup_ba. Fixes: d5ebaa7c ("Bluetooth: hci_event: Ignore multiple conn complete events") Signed-off-by:
Archie Pusaka <apusaka@chromium.org> Reviewed-by:
Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by:
-
Luiz Augusto von Dentz authored
In order to properly handle shutdown syscall the code shall not assume that the how argument is always SHUT_RDWR resulting in SHUTDOWN_MASK as that would result in poll to immediately report EPOLLHUP instead of properly waiting for disconnect_cfm (Disconnect Complete) which is rather important for the likes of BAP as the CIG may need to be reprogrammed. Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by:
-
Tetsuo Handa authored
syzbot is reporting double kfree() at remove_adv_monitor() [1], for commit 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") forgot to remove duplicated mgmt_pending_remove() when merging "if (err) {" path and "if (!pending) {" path. Link: https://syzkaller.appspot.com/bug?extid=915a8416bf15895b8e07 [1] Reported-by:
syzbot <syzbot+915a8416bf15895b8e07@syzkaller.appspotmail.com> Fixes: 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Luiz Augusto von Dentz authored
Get Device Flags don't check if device does actually use an RPA in which case it shall only set HCI_CONN_FLAG_REMOTE_WAKEUP if LL Privacy is enabled. Signed-off-by: -
Luiz Augusto von Dentz authored
This attempts to fix the follow errors: In function 'memcmp', inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9, inlined from 'l2cap_global_chan_by_psm' at net/bluetooth/l2cap_core.c:2003:15: ./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread] 44 | #define __underlying_memcmp __builtin_memcmp | ^ ./include/linux/fortify-string.h:420:16: note: in expansion of macro '__underlying_memcmp' 420 | return __underlying_memcmp(p, q, size); | ^~~~~~~~~~~~~~~~~~~ In function 'memcmp', inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9, inlined from 'l2cap_global_chan_by_psm' at net/bluetooth/l2cap_core.c:2004:15: ./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread] 44 | #define __underlying_memcmp __builtin_memcmp | ^ ./include/linux/fortify-string.h:420:16: note: in expansion of macro '__underlying_memcmp' 420 | return __underlying_memcmp(p, q, size); | ^~~~~~~~~~~~~~~~~~~ Fixes: 332f1795 ("Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression") Signed-off-by: -
Luiz Augusto von Dentz authored
This attempts to fix suspend performance when there is no connections by not updating the event mask. Fixes: ef61b6ea ("Bluetooth: Always set event mask on suspend") Signed-off-by:
-
Hans de Goede authored
Commit c8992cff ("Bluetooth: hci_event: Use of a function table to handle Command Complete") was (presumably) meant to only refactor things without any functional changes. But it does have one undesirable side-effect, before *status would always be set to skb->data[0] and it might be overridden by some of the opcode specific handling. While now it always set by the opcode specific handlers. This means that if the opcode is not known *status does not get set any more at all! This behavior change has broken bluetooth support for BCM4343A0 HCIs, the hci_bcm.c code tries to configure UART attached HCIs at a higher baudraute using vendor specific opcodes. The BCM4343A0 does not support this and this used to simply fail: [ 25.646442] Bluetooth: hci0: BCM: failed to write clock (-56) [ 25.646481] Bluetooth: hci0: Failed to set baudrate After which things would continue with the initial baudraute. But now that hci_cmd_complete_evt() no longer sets status for unknown opcodes *status is left at 0. This causes the hci_bcm.c code to think the baudraute has been changed on the HCI side and to also adjust the UART baudrate, after which communication with the HCI is broken, leading to: [ 28.579042] Bluetooth: hci0: command 0x0c03 tx timeout [ 36.961601] Bluetooth: hci0: BCM: Reset failed (-110) And non working bluetooth. Fix this by restoring the previous default "*status = skb->data[0]" handling for unknown opcodes. Fixes: c8992cff ("Bluetooth: hci_event: Use of a function table to handle Command Complete") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which is based on a customized syzkaller: BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0 Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d The problem here is that a range of tnum_range(0, map->max_entries - 1) has limited ability to represent the concrete tight range with the tnum as the set of resulting states from value + mask can result in a superset of the actual intended range, and as such a tnum_in(range, reg->var_off) check may yield true when it shouldn't, for example tnum_range(0, 2) would result in 00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here represented by a less precise superset of {0, 1, 2, 3}. As the register is known const scalar, really just use the concrete reg->var_off.value for the upper index check. Fixes: d2e4c1e6 ("bpf: Constant map key tracking for prog array pokes") Reported-by:Hsin-Wei Hung <hsinweih@uci.edu> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/984b37f9fdf7ac36831d2137415a4a915744c1b6.1661462653.git.daniel@iogearbox.netSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ... -
Jakub Kicinski authored
Aleksander Jan Bajkowski says: ==================== net: lantiq_xrx200: fix errors under memory pressure This series fixes issues that can occur in the driver under memory pressure. Situations when the system cannot allocate memory are rare, so the mentioned bugs have been fixed recently. The patches have been tested on a BT Home router with the Lantiq xRX200 chipset. Changelog: v3: - removed netdev_err() log from the first patch v2: - the second patch has been changed, so that under memory pressure situation the driver will not receive packets indefinitely regardless of the NAPI budget, - the third patch has been added. ==================== Link: https://lore.kernel.org/r/20220824215408.4695-1-olek2@wp.plSigned-off-by: -
Aleksander Jan Bajkowski authored
In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. Fixes: 7ea6cd16 ("lantiq: net: fix duplicated skb in rx descriptor ring") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Aleksander Jan Bajkowski authored
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll function immediately returns an error. This is incorrect for two reasons: * the function terminates without enabling interrupts or scheduling NAPI, * the error code (-ENOMEM) is returned instead of the number of received packets. After the first memory allocation failure occurs, packet reception is locked due to disabled interrupts from DMA.. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by:
-
Aleksander Jan Bajkowski authored
xrx200_hw_receive() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. Add a check in case build_skb() failed to allocate and return NULL. Fixes: e0155935 ("net: lantiq_xrx200: convert to build_skb") Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Heiner Kallweit authored
This is a follow-up to the discussion in [0]. It seems to me that at least the IP version used on Amlogic SoC's sometimes has a problem if register MAC_CTRL_REG is written whilst the chip is still processing a previous write. But that's just a guess. Adding a delay between two writes to this register helps, but we can also simply omit the offending second write. This patch uses the second approach and is based on a suggestion from Qi Duan. Benefit of this approach is that we can save few register writes, also on not affected chip versions. [0] https://www.spinics.net/lists/netdev/msg831526.html Fixes: bfab27a1 ("stmmac: add the experimental PCI support") Suggested-by:
Qi Duan <qi.duan@amlogic.com> Suggested-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e) This series contains updates to ixgbe and i40e drivers. Jake stops incorrect resetting of SYSTIME registers when starting cyclecounter for ixgbe. Sylwester corrects a check on source IP address when validating destination for i40e. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter ==================== Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: bug fixes These are a couple of maintenance bug fixes for the Pensando ionic networking driver. Mohamed takes care of a "plays well with others" issue where the VF spec is a bit vague on VF mac addresses, but certain customers have come to expect behavior based on other vendor drivers. Shannon addresses a couple of corner cases seen in internal stress testing. ==================== Link: https://lore.kernel.org/r/20220824165051.6185-1-snelson@pensando.ioSigned-off-by:
-
R Mohamed Shah authored
Assign a random mac address to the VF interface station address if it boots with a zero mac address in order to match similar behavior seen in other VF drivers. Handle the errors where the older firmware does not allow the VF to set its own station address. Newer firmware will allow the VF to set the station mac address if it hasn't already been set administratively through the PF. Setting it will also be allowed if the VF has trust. Fixes: fbb39807 ("ionic: support sr-iov operations") Signed-off-by:
R Mohamed Shah <mohamed@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
In looping on FW update tests we occasionally see the FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop waiting for the FW activate step to finsh inside the FW. The firmware is complaining that the done bit is set when a new dev_cmd is going to be processed. Doing a clean on the cmd registers and doorbell before exiting the wait-for-done and cleaning the done bit before the sleep prevents this from occurring. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by:
-
Shannon Nelson authored
There is a case found in heavy testing where a link flap happens just before a firmware Recovery event and the driver gets stuck in the BROKEN state. This comes from the driver getting interrupted by a FW generation change when coming back up from the link flap, and the call to ionic_start_queues() in ionic_link_status_check() fails. This can be addressed by having the fw_up code clear the BROKEN bit if seen, rather than waiting for a user to manually force the interface down and then back up. Fixes: 9e8eaf84 ("ionic: stop watchdog when in broken state") Signed-off-by:
-
David Howells authored
Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by:David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com cc: Hawkins Jiawei <yin31149@gmail.com> cc: Khalid Masum <khalid.masum.92@gmail.com> cc: Dan Carpenter <dan.carpenter@oracle.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.ukSigned-off-by:
-
Alexei Starovoitov authored
Kumar Kartikeya Dwivedi says: ==================== A fix for a missing mark_chain_precision call that leads to eager pruning and loading of invalid programs when the more permissive case is in the straight line exploration. Please see the commit log for details, and selftest for an example. ==================== Acked-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Add a test to ensure we do mark_chain_precision for the argument type ARG_CONST_ALLOC_SIZE_OR_ZERO. For other argument types, this was already done, but propagation for missing for this case. Without the fix, this test case loads successfully. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220823185500.467-1-memxor@gmail.comSigned-off-by:
-
Kumar Kartikeya Dwivedi authored
Precision markers need to be propagated whenever we have an ARG_CONST_* style argument, as the verifier cannot consider imprecise scalars to be equivalent for the purposes of states_equal check when such arguments refine the return value (in this case, set mem_size for PTR_TO_MEM). The resultant mem_size for the R0 is derived from the constant value, and if the verifier incorrectly prunes states considering them equivalent where such arguments exist (by seeing that both registers have reg->precise as false in regsafe), we can end up with invalid programs passing the verifier which can do access beyond what should have been the correct mem_size in that explored state. To show a concrete example of the problem: 0000000000000000 <prog>: 0: r2 = *(u32 *)(r1 + 80) 1: r1 = *(u32 *)(r1 + 76) 2: r3 = r1 3: r3 += 4 4: if r3 > r2 goto +18 <LBB5_5> 5: w2 = 0 6: *(u32 *)(r1 + 0) = r2 7: r1 = *(u32 *)(r1 + 0) 8: r2 = 1 9: if w1 == 0 goto +1 <LBB5_3> 10: r2 = -1 0000000000000058 <LBB5_3>: 11: r1 = 0 ll 13: r3 = 0 14: call bpf_ringbuf_reserve 15: if r0 == 0 goto +7 <LBB5_5> 16: r1 = r0 17: r1 += 16777215 18: w2 = 0 19: *(u8 *)(r1 + 0) = r2 20: r1 = r0 21: r2 = 0 22: call bpf_ringbuf_submit 00000000000000b8 <LBB5_5>: 23: w0 = 0 24: exit For the first case, the single line execution's exploration will prune the search at insn 14 for the branch insn 9's second leg as it will be verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will always be 0 so at runtime we don't get error for being greater than UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just sees reg->precise as false for both r2 registers in both states, hence considers them equal for purposes of states_equal. If we propagated precise markers using the backtracking support, we would use the precise marking to then ensure that old r2 (UINT_MAX) was within the new r2 (1) and this would never be true, so the verification would rightfully fail. The end result is that the out of bounds access at instruction 19 would be permitted without this fix. Note that reg->precise is always set to true when user does not have CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static or global functions)), hence this is only a problem when precision marks need to be explicitly propagated (i.e. privileged users with CAP_BPF). A simplified test case has been included in the next patch to prevent future regressions. Fixes: 457f4436 ("bpf: Implement BPF ring buffer and verifier support for it") Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull another cgroup fix from Tejun Heo: "Commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") required the cgroup core to grab cpus_read_lock() before invoking ->attach(). Unfortunately, it missed adding cpus_read_lock() in cgroup_attach_task_all(). Fix it" * tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
-
Tetsuo Handa authored
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does. Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1] Reported-by:
syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lorenzo Bianconi authored
Properly report hw rx hash for mt7986 chipset accroding to the new dma descriptor layout. Fixes: 197c9e9b ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/091394ea4e705fbb35f828011d98d0ba33808f69.1661257293.git.lorenzo@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Dan Carpenter authored
The ieee80211_lookup_ra_sta() function will sometimes set "sta" to NULL so add this NULL check to prevent an Oops. Fixes: 9dd19538 ("wifi: nl80211/mac80211: clarify link ID in control port TX") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuKcTAyO94YOy0Bu@kiliSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Dan Carpenter authored
The return type is supposed to be ssize_t, which is signed long, but "r" was declared as unsigned int. This means that on 64 bit systems we return positive values instead of negative error codes. Fixes: 80a3511d ("cfg80211: add debugfs HT40 allow map") Signed-off-by:
-
Siddh Raman Pant authored
When we are not connected to a channel, sending channel "switch" announcement doesn't make any sense. The BSS list is empty in that case. This causes the for loop in cfg80211_get_bss() to be bypassed, so the function returns NULL (check line 1424 of net/wireless/scan.c), causing the WARN_ON() in ieee80211_ibss_csa_beacon() to get triggered (check line 500 of net/mac80211/ibss.c), which was consequently reported on the syzkaller dashboard. Thus, check if we have an existing connection before generating the CSA beacon in ieee80211_ibss_finish_csa(). Cc: stable@vger.kernel.org Fixes: cd7760e6 ("mac80211: add support for CSA in IBSS mode") Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6 Reported-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Signed-off-by:
Siddh Raman Pant <code@siddh.me> Tested-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.meSigned-off-by:
-
Yang Yingliang authored
Add missing dev_kfree_skb() in an error path in ieee80211_tx_control_port() to avoid a memory leak. Fixes: dd820ed6 ("wifi: mac80211: return error from control port TX for drops") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220818043349.4168835-1-yangyingliang@huawei.comSigned-off-by:
-
Lorenzo Bianconi authored
Free sta pointer in __sta_info_alloc routine if sta_info_alloc_link() fails. Fixes: 246b39e4 ("wifi: mac80211: refactor some sta_info link handling") Signed-off-by:
-
Siddh Raman Pant authored
ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix crash with malformed ebtables blob which do not provide all entry points, from Florian Westphal. 2) Fix possible TCP connection clogging up with default 5-days timeout in conntrack, from Florian. 3) Fix crash in nf_tables tproxy with unsupported chains, also from Florian. 4) Do not allow to update implicit chains. 5) Make table handle allocation per-netns to fix data race. 6) Do not truncated payload length and offset, and checksum offset. Instead report EINVAl. 7) Enable chain stats update via static key iff no error occurs. 8) Restrict osf expression to ip, ip6 and inet families. 9) Restrict tunnel expression to netdev family. 10) Fix crash when trying to bind again an already bound chain. 11) Flowtable garbage collector might leave behind pending work to delete entries. This patch comes with a previous preparation patch as dependency. 12) Allow net.netfilter.nf_conntrack_frag6_high_thresh to be lowered, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_defrag_ipv6: allow nf_conntrack_frag6_high_thresh increases netfilter: flowtable: fix stuck flows on cleanup due to pending work netfilter: flowtable: add function to invoke garbage collection immediately netfilter: nf_tables: disallow binding to already bound chain netfilter: nft_tunnel: restrict it to netdev family netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families netfilter: nf_tables: do not leave chain stats enabled on error netfilter: nft_payload: do not truncate csum_offset and csum_type netfilter: nft_payload: report ERANGE for too long offset and length netfilter: nf_tables: make table handle allocation per-netns friendly netfilter: nf_tables: disallow updates of implicit chain netfilter: nft_tproxy: restrict to prerouting hook netfilter: conntrack: work around exceeded receive window netfilter: ebtables: reject blobs that don't provide all entry points ==================== Link: https://lore.kernel.org/r/20220824220330.64283-1-pablo@netfilter.orgSigned-off-by:
-
