Patch series "Simplify hugetlb vmemmap and improve its readability", v2.

This series aims to simplify hugetlb vmemmap and improve its readability.


This patch (of 8):

The name hugetlb_optimize_vmemmap_enabled() a bit confusing as it tests
two conditions (enabled and pages in use).  Instead of coming up to an
appropriate name, we could just delete it.  There is already a discussion
about deleting it in thread [1].

There is only one user of hugetlb_optimize_vmemmap_enabled() outside of
hugetlb_vmemmap, that is flush_dcache_page() in arch/arm64/mm/flush.c. 
However, it does not need to call hugetlb_optimize_vmemmap_enabled() in
flush_dcache_page() since HugeTLB pages are always fully mapped and only
head page will be set PG_dcache_clean meaning only head page's flag may
need to be cleared (see commit cf5a501d).  So it is easy to remove
hugetlb_optimize_vmemmap_enabled().

Link: https://lore.kernel.org/all/c77c61c8-8a5a-87e8-db89-d04d8aaab4cc@oracle.com/ [1]
Link: https://lkml.kernel.org/r/20220628092235.91270-2-songmuchun@bytedance.comSigned-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull LED updates from Pavel Machek:
 "A new driver for bcm63138, is31fl319x updates, fixups for multicolor.

  The clevo-mail driver got disabled, it needs an API fix"

* tag 'leds-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (23 commits)
  leds: is31fl319x: use simple i2c probe function
  leds: is31fl319x: Fix devm vs. non-devm ordering
  leds: is31fl319x: Make use of dev_err_probe()
  leds: is31fl319x: Make use of device properties
  leds: is31fl319x: Cleanup formatting and dev_dbg calls
  leds: is31fl319x: Add support for is31fl319{0,1,3} chips
  leds: is31fl319x: Move chipset-specific values in chipdef struct
  leds: is31fl319x: Use non-wildcard names for vars, structs and defines
  leds: is31fl319x: Add missing si-en compatibles
  dt-bindings: leds: pwm-multicolor: document max-brigthness
  leds: turris-omnia: convert to use dev_groups
  leds: leds-bcm63138: get rid of LED_OFF
  leds: add help info about BCM63138 module name
  dt-bindings: leds: leds-bcm63138: unify full stops in descriptions
  dt-bindings: leds: lp50xx: fix LED children names
  dt-bindings: leds: class-multicolor: reference class directly in multi-led node
  leds: bcm63138: add support for BCM63138 controller
  dt-bindings: leds: add Broadcom's BCM63138 controller
  leds: clevo-mail: Mark as broken pending interface fix
  leds: pwm-multicolor: Support active-low LEDs
  ...

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.0-rc1.

  It was delayed from last week as I wanted to make sure the last commit
  here got some good testing in linux-next and elsewhere as it seemed to
  show up only late in testing for some reason.

  Nothing major here, just lots of cleanups from Jiri and Ilpo to make
  the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).

  Also included in here is the obligatory n_gsm updates from Daniel
  Starke and lots of tiny driver updates and minor fixes and tweaks for
  other smaller serial drivers.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  tty: amiserial: Fix comment typo
  tty: serial: document uart_get_console()
  tty: serial: serial_core, reformat kernel-doc for functions
  Documentation: serial: link uart_ops properly
  Documentation: serial: move GPIO kernel-doc to the functions
  Documentation: serial: dedup kernel-doc for uart functions
  Documentation: serial: move uart_ops documentation to the struct
  dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  serial: mvebu-uart: uart2 error bits clearing
  tty: serial: fsl_lpuart: correct the count of break characters
  serial: stm32: make info structs static to avoid sparse warnings
  serial: fsl_lpuart: zero out parity bit in CS7 mode
  tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  tty: vt: initialize unicode screen buffer
  serial: remove VR41XX serial driver
  serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  dt_bindings: rs485: Correct delay values
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this cycle, we mainly fixed some corner cases that manipulate a
  per-file compression flag inappropriately. And, we found f2fs counted
  valid blocks in a section incorrectly when zone capacity is set, and
  thus, fixed it with additional sysfs entry to check it easily.

  Lastly, this series includes several patches with respect to the new
  atomic write support such as a couple of bug fixes and re-adding
  atomic_write_abort support that we removed by mistake in the previous
  release.

  Enhancements:
   - add sysfs entries to understand atomic write operations and zone
     capacity
   - introduce memory mode to get a hint for low-memory devices
   - adjust the waiting time of foreground GC
   - decompress clusters under softirq to avoid non-deterministic
     latency
   - do not skip updating inode when retrying to flush node page
   - enforce single zone capacity

  Bug fixes:
   - set the compression/no-compression flags correctly
   - revive F2FS_IOC_ABORT_VOLATILE_WRITE
   - check inline_data during compressed inode conversion
   - understand zone capacity when calculating valid block count

  As usual, the series includes several minor clean-ups and sanity
  checks"

* tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
  f2fs: use onstack pages instead of pvec
  f2fs: intorduce f2fs_all_cluster_page_ready
  f2fs: clean up f2fs_abort_atomic_write()
  f2fs: handle decompress only post processing in softirq
  f2fs: do not allow to decompress files have FI_COMPRESS_RELEASED
  f2fs: do not set compression bit if kernel doesn't support
  f2fs: remove device type check for direct IO
  f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
  f2fs: revive F2FS_IOC_ABORT_VOLATILE_WRITE
  f2fs: fix to do sanity check on segment type in build_sit_entries()
  f2fs: obsolete unused MAX_DISCARD_BLOCKS
  f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
  f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time
  f2fs: introduce sysfs atomic write statistics
  f2fs: don't bother wait_ms by foreground gc
  f2fs: invalidate meta pages only for post_read required inode
  f2fs: allow compression of files without blocks
  f2fs: fix to check inline_data during compressed inode conversion
  f2fs: Delete f2fs_copy_page() and replace with memcpy_page()
  f2fs: fix to invalidate META_MAPPING before DIO write
  ...

Pull fuse updates from Miklos Szeredi:

 - Fix an issue with reusing the bdi in case of block based filesystems

 - Allow root (in init namespace) to access fuse filesystems in user
   namespaces if expicitly enabled with a module param

 - Misc fixes

* tag 'fuse-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: retire block-device-based superblock on force unmount
  vfs: function to prevent re-use of block-device-based superblocks
  virtio_fs: Modify format for virtio_fs_direct_access
  virtiofs: delete unused parameter for virtio_fs_cleanup_vqs
  fuse: Add module param for CAP_SYS_ADMIN access bypassing allow_other
  fuse: Remove the control interface for virtio-fs
  fuse: ioctl: translate ENOSYS
  fuse: limit nsec
  fuse: avoid unnecessary spinlock bump
  fuse: fix deadlock between atomic O_TRUNC and page invalidation
  fuse: write inode in fuse_release()

Pull overlayfs update from Miklos Szeredi:
 "Just a small update"

* tag 'ovl-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix spelling mistakes
  ovl: drop WARN_ON() dentry is NULL in ovl_encode_fh()
  ovl: improve ovl_get_acl() if POSIX ACL support is off
  ovl: fix some kernel-doc comments
  ovl: warn if trusted xattr creation fails

Pull exfat updates from Namjae Jeon:

 - fix the error code of rename syscall

 - cleanup and suppress the superfluous error messages

 - remove duplicate directory entry update

 - add exfat git tree in MAINTAINERS

* tag 'exfat-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  MAINTAINERS: Add Namjae's exfat git tree
  exfat: Drop superfluous new line for error messages
  exfat: Downgrade ENAMETOOLONG error message to debug messages
  exfat: Expand exfat_err() and co directly to pr_*() macro
  exfat: Define NLS_NAME_* as bit flags explicitly
  exfat: Return ENAMETOOLONG consistently for oversized paths
  exfat: remove duplicate write inode for extending dir/file
  exfat: remove duplicate write inode for truncating file
  exfat: reuse __exfat_write_inode() to update directory entry

If something manages to set the maximum file size to MAX_OFFSET+1, this
can cause the xfs and ext4 filesystems at least to become corrupt.

Ordinarily, the kernel protects against userspace trying this by
checking the value early in the truncate() and ftruncate() system calls
calls - but there are at least two places that this check is bypassed:

 (1) Cachefiles will round up the EOF of the backing file to DIO block
     size so as to allow DIO on the final block - but this might push
     the offset negative. It then calls notify_change(), but this
     inadvertently bypasses the checking. This can be triggered if
     someone puts an 8EiB-1 file on a server for someone else to try and
     access by, say, nfs.

 (2) ksmbd doesn't check the value it is given in set_end_of_file_info()
     and then calls vfs_truncate() directly - which also bypasses the
     check.

In both cases, it is potentially possible for a network filesystem to
cause a disk filesystem to be corrupted: cachefiles in the client's
cache filesystem; ksmbd in the server's filesystem.

nfsd is okay as it checks the value, but we can then remove this check
too.

Fix this by adding a check to inode_newsize_ok(), as called from
setattr_prepare(), thereby catching the issue as filesystems set up to
perform the truncate with minimal opportunity for bypassing the new
check.

Fixes: 1f08c925 ("cachefiles: Implement backing file wrangling")
Fixes: f4415848 ("cifsd: add file operations")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@kernel.org
Acked-by: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Steve French <sfrench@samba.org>
cc: Hyunchul Lee <hyc.lee@gmail.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull hwspinlock updates from Bjorn Andersson:
 "This removes the need for representing the Qualcomm SFPB mutex using
  an intermediate syscon node and it clean up the pm_runtime_get_sync()
  usage in the OMAP hwspinlock driver"

* tag 'hwlock-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock: qcom: Add support for mmio usage to sfpb-mutex
  hwspinlock: using pm_runtime_resume_and_get instead of pm_runtime_get_sync

Pull mailbox updates from Jassi Brar:

 - mtk:
     - use rx_callback instead of cmdq_task_cb

 - qcom:
     - add syscon const
     - add SM6375 compatible

 - imx:
     - enable RST channel
     - clear pending irqs

* tag 'mailbox-v5.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: imx: clear pending interrupts
  dt-bindings: mailbox: qcom-ipcc: Add SM6375 compatible
  mailbox: imx: support RST channel
  dt-bindings: mailbox: imx-mu: add RST channel
  dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries
  mailbox: mtk-cmdq: Remove proprietary cmdq_task_cb

Merge tag 'hyperv-next-signed-20220807' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:
 "A few miscellaneous patches. There is no large patch series for this
  merge window"

* tag 'hyperv-next-signed-20220807' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: Create debugfs file with hyper-v balloon usage information
  drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size
  PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu()
  Drivers: hv: vm_bus: Handle vmbus rescind calls after vmbus is suspended

Pull coccinelle semantic patch updates from Julia Lawall:

 - Update the semantic patches in the kernel that contain a URL for
   Coccinelle with a URL that is currently valid (from myself).

 - Add a semantic patch checking for unnecessary NULL tests on dev_{put,
   hold} functions (from Ziyang Xuan, followed bt a modification from
   myself).

 - Drop a semantic patch that replaces 0/1 by booleans, as this change
   was considered to be not worthwhile by some maintainers (from Steve
   Rostedt).

 - Extend an existing semantic patch with more checks for useless tests
   on variables addresses (from Jérémy Lefaure).

* tag 'coccinelle-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  update Coccinelle URL
  coccinelle: free: add version constraint
  scripts/coccinelle/free: add NULL test before dev_{put, hold} functions
  coccinelle: Remove script that checks replacing 0/1 with false/true in functions returning bool
  coccinelle: Extend address test from ifaddr semantic patch to test expressions

Pull bitmap updates from Yury Norov:

 - fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)

 - optimize out non-atomic bitops on compile-time constants (Alexander
   Lobakin)

 - cleanup bitmap-related headers (Yury Norov)

 - x86/olpc: fix 'logical not is only applied to the left hand side'
   (Alexander Lobakin)

 - lib/nodemask: inline wrappers around bitmap (Yury Norov)

* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
  lib/nodemask: inline next_node_in() and node_random()
  powerpc: drop dependency on <asm/machdep.h> in archrandom.h
  x86/olpc: fix 'logical not is only applied to the left hand side'
  lib/cpumask: move some one-line wrappers to header file
  headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
  headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
  headers/deps: mm: Optimize <linux/gfp.h> header dependencies
  lib/cpumask: move trivial wrappers around find_bit to the header
  lib/cpumask: change return types to unsigned where appropriate
  cpumask: change return types to bool where appropriate
  lib/bitmap: change type of bitmap_weight to unsigned long
  lib/bitmap: change return types to bool where appropriate
  arm: align find_bit declarations with generic kernel
  iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
  lib/test_bitmap: test the tail after bitmap_to_arr64()
  lib/bitmap: fix off-by-one in bitmap_to_arr64()
  lib: test_bitmap: add compile-time optimization/evaluations assertions
  bitmap: don't assume compiler evaluates small mem*() builtins calls
  net/ice: fix initializing the bitmap in the switch code
  bitops: let optimize out non-atomic bitops on compile-time constants
  ...

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

The various functions contain a NULL check starting in v5.15.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

Pull cifs updates from Steve French:
 "Mostly cleanup, including smb1 refactoring:

   - multichannel perf improvement

   - move additional SMB1 code to not be compiled in when legacy support
     is disabled.

   - bug fixes, including one important one for memory leak

   - various cleanup patches

  We are still working on and testing some deferred close improvements
  including an important lease break fix for case when multiple deferred
  closes are still open, and also some additional perf improvements -
  those are not included here"

* tag '5.20-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: alloc_mid function should be marked as static
  cifs: remove "cifs_" prefix from init/destroy mids functions
  cifs: remove useless DeleteMidQEntry()
  cifs: when insecure legacy is disabled shrink amount of SMB1 code
  cifs: trivial style fixup
  cifs: fix wrong unlock before return from cifs_tree_connect()
  cifs: avoid use of global locks for high contention data
  cifs: remove remaining build warnings
  cifs: list_for_each() -> list_for_each_entry()
  cifs: update MAINTAINERS file with reviewers
  smb2: small refactor in smb2_check_message()
  cifs: Fix memory leak when using fscache
  cifs: remove minor build warning
  cifs: remove some camelCase and also some static build warnings
  cifs: remove unnecessary (void*) conversions.
  cifs: remove unnecessary type castings
  cifs: remove redundant initialization to variable mnt_sign_enabled
  smb3: check xattr value length earlier

Pull misc updates from Andrew Morton:
 "Updates to various subsystems which I help look after. lib, ocfs2,
  fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
  material this time"

* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  scripts/gdb: ensure the absolute path is generated on initial source
  MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
  mailmap: add linux.dev alias for Brendan Higgins
  mailmap: update Kirill's email
  profile: setup_profiling_timer() is moslty not implemented
  ocfs2: fix a typo in a comment
  ocfs2: use the bitmap API to simplify code
  ocfs2: remove some useless functions
  lib/mpi: fix typo 'the the' in comment
  proc: add some (hopefully) insightful comments
  bdi: remove enum wb_congested_state
  kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
  lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
  squashfs: support reading fragments in readahead call
  squashfs: implement readahead
  squashfs: always build "file direct" version of page actor
  Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
  fs/ocfs2: Fix spelling typo in comment
  ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
  proc: fix test for "vsyscall=xonly" boot option
  ...

Pull fbdev updates from Helge Deller:
 "The two major changes in this patchset corrects VGA modes, color
  handling and various other smaller fixes in the Atari framebuffer (by
  Geert Uytterhoeven), and devm_* conversion, platform data fixes and
  header cleanups in the imxfb driver (by Uwe Kleine-König).

  Other small patches clean up code in sa1100fb, cirrusfb and omapfb,
  fix a refcount leak in amba-clcd (by Liang He), and adds parameter
  checks to arkfb, i740fb, vt8623fb and s3fb (by Zheyu Ma)"

* tag 'for-5.20/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (27 commits)
  video: fbdev: s3fb: Check the size of screen before memset_io()
  video: fbdev: arkfb: Check the size of screen before memset_io()
  video: fbdev: vt8623fb: Check the size of screen before memset_io()
  video: fbdev: i740fb: Check the argument of i740_calc_vclk()
  video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()
  video: fbdev: imxfb: fix return value check in imxfb_probe()
  video: fbdev: sis: fix typos in SiS_GetModeID()
  video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource
  video: fbdev: imxfb: Fold <linux/platform_data/video-imxfb.h> into only user
  video: fbdev: imxfb: Drop unused symbols from header
  video: fbdev: imxfb: Drop platform data support
  video: fbdev: amba-clcd: Fix refcount leak bugs
  video: fbdev: omapfb: Unexport omap*_update_window_async()
  video: fbdev: atari: Remove backward bug-compatibility
  video: fbdev: atari: Remove unused definitions and variables
  video: fbdev: atari: Fix VGA modes
  video: fbdev: atari: Fix TT High video mode vertical refresh
  video: fbdev: atari: Remove unneeded casts to void *
  video: fbdev: atari: Remove unneeded casts from void *
  video: fbdev: atari: Fix ext_setcolreg()
  ...

Pull x86 fixes from Ingo Molnar:

 - build fix for old(er) binutils

 - build fix for new GCC

 - kexec boot environment fix

* tag 'x86-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Build thunk_$(BITS) only if CONFIG_PREEMPTION=y
  x86/numa: Use cpumask_available instead of hardcoded NULL check
  x86/bus_lock: Don't assume the init value of DEBUGCTLMSR.BUS_LOCK_DETECT to be zero

Pull scheduler fixes from Ingo Molnar:
 "Various fixes: a deadline scheduler fix, a migration fix, a Sparse fix
  and a comment fix"

* tag 'sched-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Do not requeue task on CPU excluded from cpus_mask
  sched/rt: Fix Sparse warnings due to undefined rt.c declarations
  exit: Fix typo in comment: s/sub-theads/sub-threads
  sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed

Pull perf fixes from Ingo Molnar:
 "Misc fixes to kprobes and the faddr2line script, plus a cleanup"

* tag 'perf-urgent-2022-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix ';;' typo
  scripts/faddr2line: Add CONFIG_DEBUG_INFO check
  scripts/faddr2line: Fix vmlinux detection on arm64
  x86/kprobes: Update kcb status flag after singlestepping
  kprobes: Forbid probing on trampoline and BPF code areas

Pull s390 updates from Alexander Gordeev:

 - Rework copy_oldmem_page() callback to take an iov_iter.

   This includes a few prerequisite updates and fixes to the oldmem
   reading code.

 - Rework cpufeature implementation to allow for various CPU feature
   indications, which is not only limited to hardware capabilities, but
   also allows CPU facilities.

 - Use the cpufeature rework to autoload Ultravisor module when CPU
   facility 158 is available.

 - Add ELF note type for encrypted CPU state of a protected virtual CPU.
   The zgetdump tool from s390-tools package will decrypt the CPU state
   using a Customer Communication Key and overwrite respective notes to
   make the data accessible for crash and other debugging tools.

 - Use vzalloc() instead of vmalloc() + memset() in ChaCha20 crypto
   test.

 - Fix incorrect recovery of kretprobe modified return address in
   stacktrace.

 - Switch the NMI handler to use generic irqentry_nmi_enter() and
   irqentry_nmi_exit() helper functions.

 - Rework the cryptographic Adjunct Processors (AP) pass-through design
   to support dynamic changes to the AP matrix of a running guest as
   well as to implement more of the AP architecture.

 - Minor boot code cleanups.

 - Grammar and typo fixes to hmcdrv and tape drivers.

* tag 's390-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits)
  Revert "s390/smp: enforce lowcore protection on CPU restart"
  Revert "s390/smp: rework absolute lowcore access"
  Revert "s390/smp,ptdump: add absolute lowcore markers"
  s390/unwind: fix fgraph return address recovery
  s390/nmi: use irqentry_nmi_enter()/irqentry_nmi_exit()
  s390: add ELF note type for encrypted CPU state of a PV VCPU
  s390/smp,ptdump: add absolute lowcore markers
  s390/smp: rework absolute lowcore access
  s390/setup: rearrange absolute lowcore initialization
  s390/boot: cleanup adjust_to_uv_max() function
  s390/smp: enforce lowcore protection on CPU restart
  s390/tape: fix comment typo
  s390/hmcdrv: fix Kconfig "its" grammar
  s390/docs: fix warnings for vfio_ap driver doc
  s390/docs: fix warnings for vfio_ap driver lock usage doc
  s390/crash: support multi-segment iterators
  s390/crash: use static swap buffer for copy_to_user_real()
  s390/crash: move copy_to_user_real() to crash_dump.c
  s390/zcore: fix race when reading from hardware system area
  s390/crash: fix incorrect number of bytes to copy to user space
  ...

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Netgear WNR3500L v2

 - removed support for VR41xx SoC and platforms based on it

 - cleanups and fixes

* tag 'mips_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (25 commits)
  MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0
  Revert "MIPS: octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32"
  MIPS: Introduce CAVIUM_RESERVE32 Kconfig option
  MIPS: msi-octeon: eliminate kernel-doc warnings
  MIPS: Fix comment typo
  MIPS: BMIPS: Utilize cfe_die() for invalid DTB
  MIPS: CFE: Add cfe_die()
  MIPS: Fixed __debug_virt_addr_valid()
  MIPS: BCM47XX: Add support for Netgear WNR3500L v2
  MIPS: Remove VR41xx support
  MIPS: dts: align gpio-key node names with dtschema
  MIPS: dts: correct gpio-keys names and properties
  MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
  MIPS: Make phys_to_virt utilize __va()
  MIPS: vdso: Utilize __pa() for gic_pfn
  MIPS: mm: Use the bitmap API to allocate bitmaps
  MIPS: math-emu: Use the bitmap API to allocate bitmaps
  MIPS: Loongson64: Fix section mismatch warning
  mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start
  MIPS: mscc: ocelot: enable FDMA usage
  ...

Pull powerpc updates from Michael Ellerman:

 - Add support for syscall stack randomization

 - Add support for atomic operations to the 32 & 64-bit BPF JIT

 - Full support for KASAN on 64-bit Book3E

 - Add a watchdog driver for the new PowerVM hypervisor watchdog

 - Add a number of new selftests for the Power10 PMU support

 - Add a driver for the PowerVM Platform KeyStore

 - Increase the NMI watchdog timeout during live partition migration, to
   avoid timeouts due to increased memory access latency

 - Add support for using the 'linux,pci-domain' device tree property for
   PCI domain assignment

 - Many other small features and fixes

Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N.  Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.

* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
  powerpc/64e: Fix kexec build error
  EDAC/ppc_4xx: Include required of_irq header directly
  powerpc/pci: Fix PHB numbering when using opal-phbid
  powerpc/64: Init jump labels before parse_early_param()
  selftests/powerpc: Avoid GCC 12 uninitialised variable warning
  powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
  powerpc/xive: Fix refcount leak in xive_get_max_prio
  powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
  powerpc/perf: Include caps feature for power10 DD1 version
  powerpc: add support for syscall stack randomization
  powerpc: Move system_call_exception() to syscall.c
  powerpc/powernv: rename remaining rng powernv_ functions to pnv_
  powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
  powerpc/powernv: Avoid crashing if rng is NULL
  selftests/powerpc: Fix matrix multiply assist test
  powerpc/signal: Update comment for clarity
  powerpc: make facility_unavailable_exception 64s
  powerpc/platforms/83xx/suspend: Remove write-only global variable
  powerpc/platforms/83xx/suspend: Prevent unloading the driver
  powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Enabling the FPU is now a static_key

 - Improvements to the Svpbmt support

 - CPU topology bindings for a handful of systems

 - Support for systems with 64-bit hart IDs

 - Many settings have been enabled in the defconfig, including both
   support for the StarFive systems and many of the Docker requirements

There are also a handful of cleanups and improvements, as usual.

* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
  riscv: enable Docker requirements in defconfig
  riscv: convert the t-head pbmt errata to use the __nops macro
  riscv: introduce nops and __nops macros for NOP sequences
  RISC-V: Add fast call path of crash_kexec()
  riscv: mmap with PROT_WRITE but no PROT_READ is invalid
  riscv/efi_stub: Add 64bit boot-hartid support on RV64
  riscv: cpu: Add 64bit hartid support on RV64
  riscv: smp: Add 64bit hartid support on RV64
  riscv: spinwait: Fix hartid variable type
  riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
  riscv: dts: sifive: "fix" pmic watchdog node name
  riscv: dts: canaan: Add k210 topology information
  riscv: dts: sifive: Add fu740 topology information
  riscv: dts: sifive: Add fu540 topology information
  riscv: dts: starfive: Add JH7100 CPU topology
  RISC-V: Add CONFIG_{NON,}PORTABLE
  riscv: config: enable SOC_STARFIVE in defconfig
  riscv: dts: microchip: Add mpfs' topology information
  riscv: Kconfig.socs: Add comments
  riscv: Kconfig.erratas: Add comments
  ...

Pull 9p updates from Dominique Martinet:

 - a couple of fixes

 - add a tracepoint for fid refcounting

 - some cleanup/followup on fid lookup

 - some cleanup around req refcounting

* tag '9p-for-5.20' of https://github.com/martinetd/linux:
  net/9p: Initialize the iounit field during fid creation
  net: 9p: fix refcount leak in p9_read_work() error handling
  9p: roll p9_tag_remove into p9_req_put
  9p: Add client parameter to p9_req_put()
  9p: Drop kref usage
  9p: Fix some kernel-doc comments
  9p fid refcount: cleanup p9_fid_put calls
  9p fid refcount: add a 9p_fid_ref tracepoint
  9p fid refcount: add p9_fid_get/put wrappers
  9p: Fix minor typo in code comment
  9p: Remove unnecessary variable for old fids while walking from d_parent
  9p: Make the path walk logic more clear about when cloning is required
  9p: Track the root fid with its own variable during lookups

Pull gfs2 updates from Andreas Gruenbacher:

 - Instantiate glocks ouside of the glock state engine, in the contect
   of the process taking the glock. This moves unnecessary complexity
   out of the core glock code. Clean up the instantiate logic to be more
   sensible.

 - In gfs2_glock_async_wait(), cancel pending locking request upon
   failure. Make sure all glocks are left in a consistent state.

 - Various other minor cleanups and fixes.

* tag 'gfs2-v5.19-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: List traversal in do_promote is safe
  gfs2: do_promote glock holder stealing fix
  gfs2: Use better variable name
  gfs2: Make go_instantiate take a glock
  gfs2: Add new go_held glock operation
  gfs2: Revert 'Fix "truncate in progress" hang'
  gfs2: Instantiate glocks ouside of glock state engine
  gfs2: Fix up gfs2_glock_async_wait
  gfs2: Minor gfs2_glock_nq_m cleanup
  gfs2: Fix spelling mistake in comment
  gfs2: Rewrap overlong comment in do_promote
  gfs2: Remove redundant NULL check before kfree

This reverts commit 4bf7fda4.

It turns out that it was hopelessly naive to think that this would work,
considering that we've always done this.  The first machine I actually
tested this on broke at bootup, getting to

    Reached target cryptsetup.target - Local Encrypted Volumes.

and then hanging.  It's unclear what actually fails, since there's a lot
else going on around that time (eg amdgpu probing also happens around
that same time, but it could be some other random init thing that didn't
complete earlier and just caused the boot to hang at that point).

The expectations that we should default to some unsafe and untested mode
seems entirely unfounded, and the belief that this wouldn't affect
modern systems is clearly entirely false.  The machine in question is
about two years old, so it's not exactly shiny, but it's also not some
dusty old museum piece PDP-11 in a closet.

Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull more device mapper updates from Mike Snitzer:

 - Add flags argument to dm_bufio_client_create and introduce
   DM_BUFIO_CLIENT_NO_SLEEP flag to have dm-bufio use spinlock rather
   than mutex for its locking.

 - Add optional "try_verify_in_tasklet" feature to DM verity target.
   This feature gives users the option to improve IO latency by using a
   tasklet to verify, using hashes in bufio's cache, rather than wait to
   schedule a work item via workqueue. But if there is a bufio cache
   miss, or an error, then the tasklet will fallback to using workqueue.

 - Incremental changes to both dm-bufio and the DM verity target to use
   jump_label to minimize cost of branching associated with the niche
   "try_verify_in_tasklet" feature. DM-bufio in particular is used by
   quite a few other DM targets so it doesn't make sense to incur
   additional bufio cost in those targets purely for the benefit of this
   niche verity feature if the feature isn't ever used.

 - Optimize verity_verify_io, which is used by both workqueue and
   tasklet based verification, if FEC is not configured or tasklet based
   verification isn't used.

 - Remove DM verity target's verify_wq's use of the WQ_CPU_INTENSIVE
   flag since it uses WQ_UNBOUND. Also, use the WQ_HIGHPRI flag if
   "try_verify_in_tasklet" is specified.

* tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: have verify_wq use WQ_HIGHPRI if "try_verify_in_tasklet"
  dm verity: remove WQ_CPU_INTENSIVE flag since using WQ_UNBOUND
  dm verity: only copy bvec_iter in verity_verify_io if in_tasklet
  dm verity: optimize verity_verify_io if FEC not configured
  dm verity: conditionally enable branching for "try_verify_in_tasklet"
  dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP
  dm verity: allow optional args to alter primary args handling
  dm verity: Add optional "try_verify_in_tasklet" feature
  dm bufio: Add DM_BUFIO_CLIENT_NO_SLEEP flag
  dm bufio: Add flags argument to dm_bufio_client_create

Pull dma-mapping updates from Christoph Hellwig:

 - convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
   Murphy, Christoph Hellwig)

 - restructure the PCIe peer to peer mapping support (Logan Gunthorpe)

 - allow the IOMMU code to communicate an optional DMA mapping length
   and use that in scsi and libata (John Garry)

 - split the global swiotlb lock (Tianyu Lan)

 - various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
   Lukas Bulwahn, Robin Murphy)

* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
  swiotlb: fix passing local variable to debugfs_create_ulong()
  dma-mapping: reformat comment to suppress htmldoc warning
  PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
  RDMA/rw: drop pci_p2pdma_[un]map_sg()
  RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
  nvme-pci: convert to using dma_map_sgtable()
  nvme-pci: check DMA ops when indicating support for PCI P2PDMA
  iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
  iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
  dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
  dma-direct: support PCI P2PDMA pages in dma-direct map_sg
  dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
  PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
  PCI/P2PDMA: Attempt to set map_type if it has not been set
  lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
  swiotlb: clean up some coding style and minor issues
  dma-mapping: update comment after dmabounce removal
  scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
  ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
  scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
  ...

Pull iommu updates from Joerg Roedel:

 - The most intrusive patch is small and changes the default allocation
   policy for DMA addresses.

   Before the change the allocator tried its best to find an address in
   the first 4GB. But that lead to performance problems when that space
   gets exhaused, and since most devices are capable of 64-bit DMA these
   days, we changed it to search in the full DMA-mask range from the
   beginning.

   This change has the potential to uncover bugs elsewhere, in the
   kernel or the hardware. There is a Kconfig option and a command line
   option to restore the old behavior, but none of them is enabled by
   default.

 - Add Robin Murphy as reviewer of IOMMU code and maintainer for the
   dma-iommu and iova code

 - Chaning IOVA magazine size from 1032 to 1024 bytes to save memory

 - Some core code cleanups and dead-code removal

 - Support for ACPI IORT RMR node

 - Support for multiple PCI domains in the AMD-Vi driver

 - ARM SMMU changes from Will Deacon:
      - Add even more Qualcomm device-tree compatible strings
      - Support dumping of IMP DEF Qualcomm registers on TLB sync
        timeout
      - Fix reference count leak on device tree node in Qualcomm driver

 - Intel VT-d driver updates from Lu Baolu:
      - Make intel-iommu.h private
      - Optimize the use of two locks
      - Extend the driver to support large-scale platforms
      - Cleanup some dead code

 - MediaTek IOMMU refactoring and support for TTBR up to 35bit

 - Basic support for Exynos SysMMU v7

 - VirtIO IOMMU driver gets a map/unmap_pages() implementation

 - Other smaller cleanups and fixes

* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
  iommu/amd: Fix compile warning in init code
  iommu/amd: Add support for AVIC when SNP is enabled
  iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
  ACPI/IORT: Fix build error implicit-function-declaration
  drivers: iommu: fix clang -wformat warning
  iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
  iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
  dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
  MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
  iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
  iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
  iommu/amd: Set translation valid bit only when IO page tables are in use
  iommu/amd: Introduce function to check and enable SNP
  iommu/amd: Globally detect SNP support
  iommu/amd: Process all IVHDs before enabling IOMMU features
  iommu/amd: Introduce global variable for storing common EFR and EFR2
  iommu/amd: Introduce Support for Extended Feature 2 Register
  iommu/amd: Change macro for IOMMU control register bit shift to decimal value
  iommu/exynos: Enable default VM instance on SysMMU v7
  iommu/exynos: Add SysMMU v7 register set
  ...

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Change maintainer email address

  Fix-ups:
   - Obtain OCP level from Device Tree; rt4831-backlight
   - DT fix-ups/conversions; richtek,rt4831-backlight
   - Remove unused code / functionatlity; platform_lcd
   - Switch to atomic PWM API; lp855x_bl

* tag 'backlight-next-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  MAINTAINERS: Use Lee Jones' kernel.org address for Backlight submissions
  backlight: lp855x: Switch to atomic PWM API
  dt-bindings: backlight: Update Lee Jones' email address
  Revert "drivers/video/backlight/platform_lcd.c: add support for device tree based probe"
  backlight: rt4831: Apply ocp level from devicetree
  dt-bindings: backlight: rt4831: Add the new ocp level property

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Change maintainer email address
   - Use acpi_dev_for_each_child() helper to walk the ACPI list

  New Device Support:
   - BCM2711 RPiVid ASB in Broadcom BCM2835
   - MT8195 dual-core RISC-V MCU in Chrome OS Embedded Controller
   - Regulator, RTC and Keys in MediaTek MT6357 PMIC
   - GPIO in X-Powers AXP20x PMIC
   - MT6331 and MT6332 in MediaTek MT6357 PMIC
   - Intel Meteor Lake-P PCI in Intel LPSS PCI

  New Functionality:
   - Add support for non-ACPI platforms; lpc_ich

  Fix-ups:
   - Use platform data instead of hard-coded values; bcm2835-pm
   - Make use of BIT/GENMASK macros; intel_soc_pmic_bxtwc
   - Use dev_err_probe() helper; intel_soc_pmic_chtwc,
     intel_soc_pmic_bxtwc
   - Use provided generic APIs / helpers; lpc_ich
   - Clean-up .remove() return values; asic3, t7l66xb, tc6387xb,
     tc6393xb
   - Use correct formatting specifiers; syscon
   - Replace sprintf() with sysfs_emit(); intel_soc_pmic_bxtwc
   - Automatically detect and fill USB endpoint pointers; dln2
   - Use more appropriate dev/platform/spi resources APIs;
     intel_soc_pmic_bxtwc
   - Make use of pm_sleep_ptr(); intel_soc_pmic_chtwc,
     intel_soc_pmic_bxtwc
   - Improve error handling; intel_soc_pmic_bxtwc
   - Use core driver API to create groups; intel_soc_pmic_bxtwc
   - Kconfig fix-ups; MFD_SUN6I_PRCM
   - Admin: whitespace/email addresses/etc; max77714, db8500-prcmu,
     ipaq-micro, intel_soc_pmic_bxtwc
   - Remove duplicate/unused code/functionality; lpc_ich, twl-core,
     qcom-pm8008, intel_soc_pmic_bxtwc
   - DT fix-ups / conversions; da9063, ti,j721e-system-controller,
     st,stm32-timers, mt6397, qcom,tcsr, mps,mp2629, qcom-pm8xxx,
     fsl,imx8qxp-csr

  Bug Fixes:
   - Fix of_node reference leak; max77620"

* tag 'mfd-next-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  dt-bindings: mfd: stm32-timers: Move fixed string node names under 'properties'
  dt-bindings: mfd: st,stm32-timers: Correct 'resets' property name
  dt-bindings: mfd: syscon: Update Lee Jones' email address
  MAINTAINERS: Use Lee Jones' kernel.org address for Syscon submissions
  MAINTAINERS: Use Lee Jones' kernel.org address for MFD submissions
  mfd: sun6i-prcm: Update Kconfig description
  mfd: intel_soc_pmic_bxtwc: Fix spelling in the comment
  mfd: intel_soc_pmic_bxtwc: Drop unneeded casting
  mfd: intel_soc_pmic_bxtwc: Use sysfs_emit() instead of sprintf()
  mfd: intel_soc_pmic_bxtwc: Use bits.h macros for all masks
  mfd: intel_soc_pmic_bxtwc: Drop redundant ACPI_PTR()
  mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
  mfd: intel_soc_pmic_bxtwc: Extend use of temporary variable for struct device
  mfd: intel_soc_pmic_bxtwc: Use dev_err_probe()
  mfd: intel_soc_pmic_bxtwc: Convert to use platform_get/set_drvdata()
  mfd: intel_soc_pmic_bxtwc: Create sysfs attributes using core driver's facility
  mfd: intel_soc_pmic_bxtwc: Don't shadow error codes in show()/store()
  mfd: intel-lpss: Add Intel Meteor Lake-P PCI IDs
  mfd: mt6397: Add basic support for MT6331+MT6332 PMIC
  mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cells
  ...

Pull sound updates from Takashi Iwai:
 "As the diffstat shows, we've had lots of developments in a wide range
  at this time; the majority of changes are about ASoC, including
  subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
  new drivers (as usual), while there have been some significant (but
  almost invisible) improvements in ALSA core side, too.

  Below are some highlights:

  Core:

   - Faster lookups of control elements with Xarray; normal user won't
     notice, but on the devices with tons of control elements, it can be
     visibly faster

   - Support for input validation for controls; this will harden for
     badly written drivers in general with a slight overhead

   - Deferred async signal handling for working around the potential
     deadlocks

   - Cleanup / refactoring raw MIDI locking code

  ASoC:

   - Restructing of the set_fmt() callbacks for making things clearer in
     situations like CODEC to CODEC links

   - Clean up and modernizing the DAI naming scheme setups

   - Merge of more of the Intel AVS driver stack, including some board
     integrations

   - New version 4 mechanism for communication with SOF DSPs

   - Suppoort for dynamically selecting the PLL to use at runtime on
     i.MX platforms

   - Improvements for CODEC to CODEC support in the generic cards

   - Support for AMD Jadeite and various machines, AMD RPL, Intel
     MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
     MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
     WAS883x, and Texas Instruments TAS2780

  HD- and USB-audio:

   - Continued improvement for CS35L41 (sub)codec support

   - More quirks for various devices (HP, Lenovo, Dell, Clevo)"

* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
  ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
  ALSA: line6: Replace sprintf() with sysfs_emit()
  ALSA: hda: Replace sprintf() with sysfs_emit()
  ALSA: pcm: Replace sprintf() with sysfs_emit()
  ALSA: core: Replace scnprintf() with sysfs_emit()
  ALSA: control-led: Replace sprintf() with sysfs_emit()
  ALSA: aoa: Replace sprintf() with sysfs_emit()
  ALSA: ac97: Replace sprintf() with sysfs_emit()
  ALSA: hda/realtek: Add quirk for Clevo NV45PZ
  ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
  ALSA: control: Use deferred fasync helper
  ALSA: pcm: Use deferred fasync helper
  ALSA: timer: Use deferred fasync helper
  ALSA: core: Add async signal helpers
  ASoC: q6asm: use kcalloc() instead of kzalloc()
  ACPI: scan: Add CLSA0101 Laptop Support
  ALSA: hda: cs35l41: Support CLSA0101
  ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
  ASoC: dt-bindings: use spi-peripheral-props.yaml
  ASoC: codecs: va-macro: use fsgen as clock
  ...

Pull tpm updates from Jarkko Sakkinen:
 "Mostly TPM and also few keyring fixes"

* tag 'tpmdd-next-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Add check for Failure mode for TPM2 modules
  tpm: eventlog: Fix section mismatch for DEBUG_SECTION_MISMATCH
  tpm: fix platform_no_drv_owner.cocci warning
  KEYS: asymmetric: enforce SM2 signature use pkey algo
  pkcs7: support EC-RDSA/streebog in SignerInfo
  pkcs7: parser support SM2 and SM3 algorithms combination
  sign-file: Fix confusing error messages
  X.509: Support parsing certificate using SM2 algorithm
  tpm: Add tpm_tis_i2c backend for tpm_tis_core
  tpm: Add tpm_tis_verify_crc to the tpm_tis_phy_ops protocol layer
  dt-bindings: trivial-devices: Add Infineon SLB9673 TPM
  tpm: Add upgrade/reduced mode support for TPM1.2 modules

Merge tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools updates from Arnaldo Carvalho de Melo:

 - Introduce 'perf lock contention' subtool, using new lock contention
   tracepoints and using BPF for in kernel aggregation and then
   userspace processing using the perf tooling infrastructure for
   resolving symbols, target specification, etc.

   Since the new lock contention tracepoints don't provide lock names,
   get up to 8 stack traces and display the first non-lock function
   symbol name as a caller:

    $ perf lock report -F acquired,contended,avg_wait,wait_total

                    Name   acquired  contended     avg wait    total wait

     update_blocked_a...         40         40      3.61 us     144.45 us
     kernfs_fop_open+...          5          5      3.64 us      18.18 us
      _nohz_idle_balance          3          3      2.65 us       7.95 us
     tick_do_update_j...          1          1      6.04 us       6.04 us
      ep_scan_ready_list          1          1      3.93 us       3.93 us

   Supports the usual 'perf record' + 'perf report' workflow as well as
   a BCC/bpftrace like mode where you start the tool and then press
   control+C to get results:

     $ sudo perf lock contention -b
    ^C
    contended   total wait     max wait     avg wait         type   caller

            42    192.67 us     13.64 us      4.59 us     spinlock   queue_work_on+0x20
            23     85.54 us     10.28 us      3.72 us     spinlock   worker_thread+0x14a
             6     13.92 us      6.51 us      2.32 us        mutex   kernfs_iop_permission+0x30
             3     11.59 us     10.04 us      3.86 us        mutex   kernfs_dop_revalidate+0x3c
             1      7.52 us      7.52 us      7.52 us     spinlock   kthread+0x115
             1      7.24 us      7.24 us      7.24 us     rwlock:W   sys_epoll_wait+0x148
             2      7.08 us      3.99 us      3.54 us     spinlock   delayed_work_timer_fn+0x1b
             1      6.41 us      6.41 us      6.41 us     spinlock   idle_balance+0xa06
             2      2.50 us      1.83 us      1.25 us        mutex   kernfs_iop_lookup+0x2f
             1      1.71 us      1.71 us      1.71 us        mutex   kernfs_iop_getattr+0x2c
    ...

 - Add new 'perf kwork' tool to trace time properties of kernel work
   (such as softirq, and workqueue), uses eBPF skeletons to collect info
   in kernel space, aggregating data that then gets processed by the
   userspace tool, e.g.:

    # perf kwork report

     Kwork Name      | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end |
    ----------------------------------------------------------------------------------------------------
     nvme0q5:130     | 004 |      1.101 ms |    49 |    0.051 ms |    26035.056403 s |  26035.056455 s |
     amdgpu:162      | 002 |      0.176 ms |     9 |    0.046 ms |    26035.268020 s |  26035.268066 s |
     nvme0q24:149    | 023 |      0.161 ms |    55 |    0.009 ms |    26035.655280 s |  26035.655288 s |
     nvme0q20:145    | 019 |      0.090 ms |    33 |    0.014 ms |    26035.939018 s |  26035.939032 s |
     nvme0q31:156    | 030 |      0.075 ms |    21 |    0.010 ms |    26035.052237 s |  26035.052247 s |
     nvme0q8:133     | 007 |      0.062 ms |    12 |    0.021 ms |    26035.416840 s |  26035.416861 s |
     nvme0q6:131     | 005 |      0.054 ms |    22 |    0.010 ms |    26035.199919 s |  26035.199929 s |
     nvme0q19:144    | 018 |      0.052 ms |    14 |    0.010 ms |    26035.110615 s |  26035.110625 s |
     nvme0q7:132     | 006 |      0.049 ms |    13 |    0.007 ms |    26035.125180 s |  26035.125187 s |
     nvme0q18:143    | 017 |      0.033 ms |    14 |    0.007 ms |    26035.169698 s |  26035.169705 s |
     nvme0q17:142    | 016 |      0.013 ms |     1 |    0.013 ms |    26035.565147 s |  26035.565160 s |
     enp5s0-rx-0:164 | 006 |      0.004 ms |     4 |    0.002 ms |    26035.928882 s |  26035.928884 s |
     enp5s0-tx-0:166 | 008 |      0.003 ms |     3 |    0.002 ms |    26035.870923 s |  26035.870925 s |
    --------------------------------------------------------------------------------------------------------

   See commit log messages for more examples with extra options to limit
   the events time window, etc.

 - Add support for new AMD IBS (Instruction Based Sampling) features:

   With the DataSrc extensions, the source of data can be decoded among:
     - Local L3 or other L1/L2 in CCX.
     - A peer cache in a near CCX.
     - Data returned from DRAM.
     - A peer cache in a far CCX.
     - DRAM address map with "long latency" bit set.
     - Data returned from MMIO/Config/PCI/APIC.
     - Extension Memory (S-Link, GenZ, etc - identified by the CS target
       and/or address map at DF's choice).
     - Peer Agent Memory.

 - Support hardware tracing with Intel PT on guest machines, combining
   the traces with the ones in the host machine.

 - Add a "-m" option to 'perf buildid-list' to show kernel and modules
   build-ids, to display all of the information needed to do external
   symbolization of kernel stack traces, such as those collected by
   bpf_get_stackid().

 - Add arch TSC frequency information to perf.data file headers.

 - Handle changes in the binutils disassembler function signatures in
   perf, bpftool and bpf_jit_disasm (Acked by the bpftool maintainer).

 - Fix building the perf perl binding with the newest gcc in distros
   such as fedora rawhide, where some new warnings were breaking the
   build as perf uses -Werror.

 - Add 'perf test' entry for branch stack sampling.

 - Add ARM SPE system wide 'perf test' entry.

 - Add user space counter reading tests to 'perf test'.

 - Build with python3 by default, if available.

 - Add python converter script for the vendor JSON event files.

 - Update vendor JSON files for most Intel cores.

 - Add vendor JSON File for Intel meteorlake.

 - Add Arm Cortex-A78C and X1C JSON vendor event files.

 - Add workaround to symbol address reading from ELF files without phdr,
   falling back to the previoous equation.

 - Convert legacy map definition to BTF-defined in the perf BPF script
   test.

 - Rework prologue generation code to stop using libbpf deprecated APIs.

 - Add default hybrid events for 'perf stat' on x86.

 - Add topdown metrics in the default 'perf stat' on the hybrid machines
   (big/little cores).

 - Prefer sampled CPU when exporting JSON in 'perf data convert'

 - Fix ('perf stat CSV output linter') and ("Check branch stack
   sampling") 'perf test' entries on s390.

* tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
  perf stat: Refactor __run_perf_stat() common code
  perf lock: Print the number of lost entries for BPF
  perf lock: Add --map-nr-entries option
  perf lock: Introduce struct lock_contention
  perf scripting python: Do not build fail on deprecation warnings
  genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO
  perf build: Suppress openssl v3 deprecation warnings in libcrypto feature test
  perf parse-events: Break out tracepoint and printing
  perf parse-events: Don't #define YY_EXTRA_TYPE
  tools bpftool: Don't display disassembler-four-args feature test
  tools bpftool: Fix compilation error with new binutils
  tools bpf_jit_disasm: Don't display disassembler-four-args feature test
  tools bpf_jit_disasm: Fix compilation error with new binutils
  tools perf: Fix compilation error with new binutils
  tools include: add dis-asm-compat.h to handle version differences
  tools build: Don't display disassembler-four-args feature test
  tools build: Add feature test for init_disassemble_info API changes
  perf test: Add ARM SPE system wide test
  perf tools: Rework prologue generation code
  perf bpf: Convert legacy map definition to BTF-defined
  ...

Merge tag 'livepatching-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Make a selftest more reliable

* tag 'livepatching-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  selftests/livepatch: better synchronize test_klp_callbacks_busy

Pull VFIO updates from Alex Williamson:

 - Cleanup use of extern in function prototypes (Alex Williamson)

 - Simplify bus_type usage and convert to device IOMMU interfaces (Robin
   Murphy)

 - Check missed return value and fix comment typos (Bo Liu)

 - Split migration ops from device ops and fix races in mlx5 migration
   support (Yishai Hadas)

 - Fix missed return value check in noiommu support (Liam Ni)

 - Hardening to clear buffer pointer to avoid use-after-free (Schspa
   Shi)

 - Remove requirement that only the same mm can unmap a previously
   mapped range (Li Zhe)

 - Adjust semaphore release vs device open counter (Yi Liu)

 - Remove unused arg from SPAPR support code (Deming Wang)

 - Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
   Michael Kawano)

 - Replace DMA unmap notifier with callbacks (Jason Gunthorpe)

 - Clarify SPAPR support comment relative to iommu_ops (Alexey
   Kardashevskiy)

 - Revise page pinning API towards compatibility with future iommufd
   support (Nicolin Chen)

 - Resolve issues in vfio-ccw, including use of DMA unmap callback (Eric
   Farman)

* tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio: (40 commits)
  vfio/pci: fix the wrong word
  vfio/ccw: Check return code from subchannel quiesce
  vfio/ccw: Remove FSM Close from remove handlers
  vfio/ccw: Add length to DMA_UNMAP checks
  vfio: Replace phys_pfn with pages for vfio_pin_pages()
  vfio/ccw: Add kmap_local_page() for memcpy
  vfio: Rename user_iova of vfio_dma_rw()
  vfio/ccw: Change pa_pfn list to pa_iova list
  vfio/ap: Change saved_pfn to saved_iova
  vfio: Pass in starting IOVA to vfio_pin/unpin_pages API
  vfio/ccw: Only pass in contiguous pages
  vfio/ap: Pass in physical address of ind to ap_aqic()
  drm/i915/gvt: Replace roundup with DIV_ROUND_UP
  vfio: Make vfio_unpin_pages() return void
  vfio/spapr_tce: Fix the comment
  vfio: Replace the iommu notifier with a device list
  vfio: Replace the DMA unmapping notifier with a callback
  vfio/ccw: Move FSM open/close to MDEV open/close
  vfio/ccw: Refactor vfio_ccw_mdev_reset
  vfio/ccw: Create a CLOSE FSM event
  ...

This reverts commit 6f5c672d.

This breaks normal crash dump when CPU0 is offline.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

This reverts commit 7d06fed7.

This introduced vmem_mutex locking from vmem_map_4k_page()
function called from smp_reinit_ipl_cpu() with interrupts
disabled. While it is a pre-SMP early initcall no other CPUs
running in parallel nor other code taking vmem_mutex on this
boot stage - it still needs to be fixed.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>