- 27 May, 2023 21 commits
-
-
Pierre-Louis Bossart authored
The .pre_ and .post_switch callbacks are mandatory. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230515071042.2038-22-yung-chuan.liao@linux.intel.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Pierre-Louis Bossart authored
Add the abstraction needed to only program the LSDIID registers for the HDaudio extended links. It's perfectly fine to program this register multiple times in case devices lose sync and reattach. Signed-off-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
When a peripheral reports as ATTACHED, the manager may need to follow a programming sequence, e.g. to assign DMA resources and/or assign a command queue for that peripheral. This patch adds an optional callback, which will be invoked every time the peripheral attaches. This might be overkill in some scenarios, and one could argue that this should be invoked only on the first attachment. The bus does not however track this first attachment with any existing state-mirroring variable, and using dev_num_sticky would not work across suspend-resume cycles. Signed-off-by:
-
Pierre-Louis Bossart authored
This is the last callback needed for all bus management routines on new hardware. Same concept as before, just different register. Signed-off-by:
-
Pierre-Louis Bossart authored
The WAKEEN and WAKESTS registers were moved to the per-link SHIM_VS area. Signed-off-by:
-
Pierre-Louis Bossart authored
The sequences are so far identical, so the abstraction is a bit over-engineered. In time we will simplify if there is no need to special case or work-around programming sequences. Signed-off-by:
-
Pierre-Louis Bossart authored
Same functionality as before, but with the registers moved to the HDaudio multi-link area. Signed-off-by:
-
Pierre-Louis Bossart authored
The code is similar to the previous implementation, the only difference is that the PDI descriptors are now in different areas. Using common helpers proves tricky with multiple changed registers, workarounds that are no longer necessary. It's simpler to duplicate the intel_register_dai() function rather than try to add multiple levels of abstraction and indirections. Signed-off-by:
-
Pierre-Louis Bossart authored
Unlike previous hardware generations, the glue-to-master transition is not managed by software, instead the transitions are managed as part of the power-up/down sequences controlled by SPA/CPA bits. The only thing that's required is to configure the link PHY for 'normal' operation instead of the PHY test mode. Signed-off-by:
-
Pierre-Louis Bossart authored
The registers used for multi-link synchronization are no longer in the SHIM but in the HDaudio multi-link capability space. Use helpers to configure the SYNCPRD value, and wait for SYNCPU to change after powering-up. Note that the SYNCPRD value is shared between all sublinks, for obvious reasons if those links are supposed to be synchronized. The value of SYNCPRD is programmed only once for all sublinks. Signed-off-by:
-
Pierre-Louis Bossart authored
only power-up/down for now, the frequency is not set. Signed-off-by:
-
Pierre-Louis Bossart authored
Add access to registers in SHIM and SHIM_VS (vendor-specific) areas. Signed-off-by:
-
Pierre-Louis Bossart authored
Now that the ASoC/SOF/HDAudio parts has retrieved the mutex and set the parameter, we can use it to share the same synchronization across the two domains. Signed-off-by:
-
Pierre-Louis Bossart authored
Use new helper and interface to make sure the HDaudio and SoundWire parts use the same mutex when accessing shared registers. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230515071042.2038-9-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
In existing Intel/SoundWire systems, all the SoundWire configuration is 'self-contained', with the 'shim_lock' mutex used to protect access to shared registers in multi-link configurations. With the move of part of the SoundWire registers to the HDaudio multi-link structure, we need a unified lock. The hda-mlink implementation provides an 'eml_lock' that is used to protect shared registers such as LCTL and LSYNC, we can pass it to the SoundWire side. There is no issue with possible dangling pointers since the SoundWire auxiliary devices are children of the PCI device, so the 'eml_lock' cannot be removed while the SoundWire side is in use. This patch only adds the interface for now. Signed-off-by:
-
Pierre-Louis Bossart authored
The hdac_bus pointer is used to access the extended link information and handle power management. Pass it from the SOF driver down to the auxiliary devices. Signed-off-by:
-
Pierre-Louis Bossart authored
Select relevant ip-offset depending on hardware version. This offset is used to access MCP_ or IP_MCP_ registers with a fixed offset. For existing platforms, the offset is exactly zero. Starting with LunarLake, the offset is 0x4000. Signed-off-by:
-
Pierre-Louis Bossart authored
The previous settings are not applicable, use a flag to determine what the register layout is. Signed-off-by:
-
Pierre-Louis Bossart authored
The register map and programming sequences for the ACE2.x IP are completely different and need to be abstracted with a different set of callbacks. This initial patch adds a new file, follow-up patches will add each required callback. Signed-off-by:
-
Pierre-Louis Bossart authored
With the HDaudio extended link integration, the SHIM and IP registers are split in blocks a) SHIM generic registers b) IP registers (same offsets for Cadence IP as before) c) SHIM vendor-specific registers Add offsets and definitions as defined in the hardware specifications. Signed-off-by:
-
Pierre-Louis Bossart authored
Add the new enum needed for SoundWire IP selection. The LunarLake PCI descriptors and DSP parts will be added at a later time. Signed-off-by:
-
- 08 May, 2023 8 commits
-
-
Charles Keepax authored
It makes sense to have only a single point responsible for ensuring that all currently pending IRQs are handled. The current code in sdw_handle_slave_alerts confusingly splits this process in two. This code will loop until the asserted IRQs are cleared but it will only handle IRQs that were already asserted when it was called. This means the caller must also loop (either manually, or through its IRQ mechanism) until the IRQs are all handled. It makes sense to either do all the looping in sdw_handle_slave_alerts or do no looping there and let the host controller repeatedly call it until things are handled. There are realistically two sensible host controllers, those that will generate an IRQ when the alert status changes and those that will generate an IRQ continuously whilst the alert status is high. The current code will work fine for the second of those systems but not the first with out additional looping in the host controller. Removing the code that filters out new IRQs whilst the handler is running enables both types of host controller to be supported and simplifies the code. The code will still only loop up to SDW_READ_INTR_CLEAR_RETRY times, so it shouldn't be possible for it to get completely stuck handling IRQs forever, and if you are generating IRQs faster than you can handle them you likely have bigger problems anyway. This fixes an issue on the Cadence SoundWire IP, which only generates IRQs on an alert status change, where an alert which arrives whilst another alert is being handled will never be handled and will block all future alerts from being handled. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by:
-
Krzysztof Kozlowski authored
Use consistently only tabs to indent the value in defines. Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230418095447.577001-8-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Add support for Qualcomm Soundwire Controller with a bit different register layout. Reviewed-by:
-
Krzysztof Kozlowski authored
Currently the driver supports Qualcomm Soundwire controller versions from v1.3 till v1.7 which mostly have same register layout. With coming Qualcomm Soundwire v2.0, several registers were moved and changed, thus a different register layout will have to be supported. Prepare for this by: 1. Renaming few register defines to indicate v1.3 (earliest supported) version, 2. Add a simple table for mapping register to its offset, 3. Change the code to use the mapping table. Since only few registers differ, this solution seems easier then switching to regmap fields. Reviewed-by:
-
Krzysztof Kozlowski authored
The pointer to 'struct qcom_swrm_ctrl' was called sometimes 'swrm' and sometimes 'ctrl' variable. Choose one - 'ctrl' - so the code will be consistent and easier to read. No functional change. Reviewed-by:
-
Krzysztof Kozlowski authored
The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals. Reviewed-by:
-
Krzysztof Kozlowski authored
The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Add compatible for Qualcomm Soundwire v2.0.0 controller, which comes with several differences against v1.7.0 in register layout and more ports (thus increase maxItems of each port-related property to 16). Reviewed-by:
-
- 07 May, 2023 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again)
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate" -
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
-
- 06 May, 2023 3 commits
-
-
Arnaldo Carvalho de Melo authored
This reverts commit a980755b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
This reverts commit 51924ae6. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull dmapool updates - again - from Andrew Morton: "Reinstate the dmapool changes which were accidentally removed by a mishap on the last commit in the previous attempt at the series" Fixes: 2d55c16c ("dmapool: create/destroy cleanup"). [ The whole old series: def85743..2d55c16c results in an empty diff because that last commit ended up being just a revert of all that came everything before it. - Linus ] * tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: dmapool: link blocks across pages dmapool: don't memset on free twice dmapool: simplify freeing dmapool: consolidate page initialization dmapool: rearrange page alloc failure handling dmapool: move debug code to own functions dmapool: speedup DMAPOOL_DEBUG with init_on_alloc dmapool: cleanup integer types dmapool: use sysfs_emit() instead of scnprintf() dmapool: remove checks for dev == NULL
-
