Paulo noticed that we were missing few bits clear
before writing values back to the register on
these RMW MMIO operations.

v2: Remove "POST_" from CURSOR_COEFF_MASK. (Paulo).
v3: Remove unnecessary braces. (Jani).

Fixes: cf54ca8b ("drm/i915/cnl: Implement voltage swing sequence.")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497897572-22520-1-git-send-email-rodrigo.vivi@intel.com
(cherry picked from commit 1f588aeb)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

UAPI Changes:
- vc4: Add get/set tiling format ioctls (Eric)

Driver Changes:
- vc4: Add tiling T-format support for scanout (Eric)
- vc4: Use atomic helpers in commit (Boris)

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Eric Anholt <eric@anholt.net>

* tag 'drm-misc-next-2017-06-19_0' of git://anongit.freedesktop.org/git/drm-misc:
  drm/vc4: Mimic drm_atomic_helper_commit() behavior
  drm/vc4: Add get/set tiling ioctls.
  drm/vc4: Add T-format scanout support.

This was from a merge I did incorrectly.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Final pile of features for 4.13

New uabi:
- batch bo in first slot, for faster execbuf assembly in userspace
  (Chris Wilson)
- (sub)slice getparam, needed for mesa perf support (Robert Bragg)

First pile of patches for cnl/cfl support, maintained by Rodrigo but
with lots of contributions from others. Still incomplete since public
review still ongoing.

Features/refactoring:
- Make execbuf faster (Chris Wilson), a pile of series to make execbuf
  buffer handling have fewer passes, use less list walking, postpone
  more work to async workers and shuffle buffers less, all to make the
  common case much faster (in some cases at least).
- cold boot support for glk dsi (Madhav Chauhan)
- Clean up pipe A quirk and related old platform hacks (Ville)
- perf sampling support for kbl/glk (Lionel)
- perf cleanups (Robert Bragg)
- wire atomic state to backlight code, to avoid pipe lookup hacks
  (Maarten)
- reduce request waiting latency/overhead to remove the spinning and
  associated cpu cycle wasting (Chris)
- fix 90/270 rotation wm computation (Ville)
- new ddb allocation algo for skl (Kumar Mahesh)
- fix regression due to system suspend optimiazatino (Imre)
- the usual pile of small cleanups and refactors all over

GVT updates contained in this tag:
- optimization for per-VM mmio save/restore (Changbin)
- optimization for mmio hash table (Changbin)
- scheduler optimization with event (Ping)
- vGPU reset refinement (Fred)
- other misc refactor and cleanups, etc.

* tag 'drm-intel-next-2017-06-19' of git://anongit.freedesktop.org/git/drm-intel: (170 commits)
  drm/i915: Update DRIVER_DATE to 20170619
  drm/i915/cfl: Introduce Coffee Lake workarounds.
  drm/i915: Store 9 bits of PCI Device ID for platforms with a LP PCH
  drm/i915: Stash a pointer to the obj's resv in the vma
  drm/i915: Async GPU relocation processing
  drm/i915: Allow execbuffer to use the first object as the batch
  drm/i915: Wait upon userptr get-user-pages within execbuffer
  drm/i915: First try the previous execbuffer location
  drm/i915: Store a persistent reference for an object in the execbuffer cache
  drm/i915: Eliminate lots of iterations over the execobjects array
  drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
  drm/i915: Pass vma to relocate entry
  drm/i915: Store a direct lookup from object handle to vma
  drm/i915: Fix retrieval of hangcheck stats
  drm/i915: Store i915_gem_object_is_coherent() as a bit next to cache-dirty
  drm/i915: Mark CPU cache as dirty on every transition for CPU writes
  drm/i915: Make i915_vma_destroy() static
  drm/i915: Actually attach the tv_format property to the SDVO connector
  Revert "drm/i915/skl: New ddb allocation algorithm"
  drm/i915/glk: Add cold boot sequence for GLK DSI
  ...

This time around, the biggest thing is a bunch of GEM rework for more
fine grained locking and prep work to handle multiple address spaces
(ie. per-process pagetables).  Also some HDMI fixes for 8x96
(snapdragon 820).

One unrelated bus patch, for something that seems to get merged
through whatever random tree (and has all the right ack's).

* tag 'drm-msm-next-2017-06-20' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Fix potential buffer overflow issue
  bus: SIMPLE_PM_BUS does not depend on ARCH_RENESAS
  drm/msm: Separate locking of buffer resources from struct_mutex
  drm/msm/hdmi: Fix HDMI pink strip issue seen on 8x96
  drm/msm/hdmi: 8996 PLL: Populate unprepare
  drm/msm/hdmi: Use bitwise operators when building register values
  drm/msm: update generated headers
  drm/msm: remove address-space id
  drm/msm: support for an arbitrary number of address spaces
  drm/msm: refactor how we handle vram carveout buffers
  drm/msm: pass address-space to _get_iova() and friends
  drm/msm/mdp4+5: move aspace/id to base class
  drm/msm/mdp5: kill pipe_lock
  drm/msm: fix locking inconsistency for gpu->hw_init()
  drm/msm: Remove memptrs->wptr
  drm/msm: Add a struct to pass configuration to msm_gpu_init()
  drm/msm: Add hint to DRM_IOCTL_MSM_GEM_INFO to return an object IOVA
  drm/msm: Remove idle function hook
  drm/msm: Remove DRM_MSM_NUM_IOCTLS
  drm/msm: gpu: Enable zap shader for A5XX

A few more things for 4.13:
- Semaphore support using sync objects
- Drop fb location programming
- Optimize bo list ioctl

* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: Optimize mutex usage (v4)
  drm/amdgpu: Optimization of AMDGPU_BO_LIST_OP_CREATE (v2)
  amdgpu: use drm sync objects for shared semaphores (v6)
  amdgpu/cs: split out fence dependency checking (v2)
  drm/amdgpu: don't check the default value for vm size

Here are the Mali DP driver changes. They include the mali-dp specific
changes from Jose Abreu on crtc->mode_valid() as well as a couple of
patches for fixing the sharing of IRQ lines and use of DRM CMA helper
for framebuffer physical address calculation. Please pull!

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm/arm: mali-dp: Use CMA helper for plane buffer address calculation
  drm/mali-dp: Check PM status when sharing interrupt lines
  drm/arm: malidp: Use crtc->mode_valid() callback

- HDMI stereoscopic support
- Rework of display code to properly support SOR pad macro routing on
>=GM20x GPUs
- Various other fixes/improvements.

* 'linux-4.13' of git://github.com/skeggsb/linux: (73 commits)
  drm/nouveau/disp/nv50-: avoid creating ORs that aren't present on HW
  drm/nouveau: use proper prototype in nouveau_pmops_runtime() definition
  drm/nouveau: Skip vga_fini on non-PCI device
  drm/nouveau/tegra: Don't leave GPU in reset
  drm/nouveau/tegra: Skip manual unpowergating when not necessary
  drm/nouveau/hwmon: Change permissions to numeric
  drm/nouveau/hwmon: expose the auto_point and pwm_min/max attrs
  drm/nouveau/hwmon: Remove old code, add .write/.read operations
  drm/nouveau/hwmon: Add nouveau_hwmon_ops structure with .is_visible/.read_string
  drm/nouveau/hwmon: Add config for all sensors and their settings
  drm/nouveau/disp/gm200-: allow non-identity mapping of SOR <-> macro links
  drm/nouveau/disp/nv50-: implement a common supervisor 3.0
  drm/nouveau/disp/nv50-: implement a common supervisor 2.2
  drm/nouveau/disp/nv50-: implement a common supervisor 2.1
  drm/nouveau/disp/nv50-: implement a common supervisor 2.0
  drm/nouveau/disp/nv50-: implement a common supervisor 1.0
  drm/nouveau/disp/nv50-gt21x: remove workaround for dp->tmds hotplug issues
  drm/nouveau/disp/dp: use new devinit script interpreter entry-point
  drm/nouveau/disp/dp: determine link bandwidth requirements from head state
  drm/nouveau/disp: introduce acquire/release display path methods
  ...

drm/tegra: Changes for v4.13-rc1

This starts off with the addition of more documentation for the host1x
and DRM drivers and finishes with a slew of fixes and enhancements for
the staging IOCTLs as a result of the awesome work done by Dmitry and
Erik on the grate reverse-engineering effort.

* tag 'drm/tegra/for-4.13-rc1' of git://anongit.freedesktop.org/tegra/linux:
  gpu: host1x: At first try a non-blocking allocation for the gather copy
  gpu: host1x: Refactor channel allocation code
  gpu: host1x: Remove unused host1x_cdma_stop() definition
  gpu: host1x: Remove unused 'struct host1x_cmdbuf'
  gpu: host1x: Check waits in the firewall
  gpu: host1x: Correct swapped arguments in the is_addr_reg() definition
  gpu: host1x: Forbid unrelated SETCLASS opcode in the firewall
  gpu: host1x: Forbid RESTART opcode in the firewall
  gpu: host1x: Forbid relocation address shifting in the firewall
  gpu: host1x: Do not leak BO's phys address to userspace
  gpu: host1x: Correct host1x_job_pin() error handling
  gpu: host1x: Initialize firewall class to the job's one
  drm/tegra: dc: Disable plane if it is invisible
  drm/tegra: dc: Apply clipping to the plane
  drm/tegra: dc: Avoid reset asserts on Tegra20
  drm/tegra: Check syncpoint ID in the 'submit' IOCTL
  drm/tegra: Correct copying of waitchecks and disable them in the 'submit' IOCTL
  drm/tegra: Check for malformed offsets and sizes in the 'submit' IOCTL
  drm/tegra: Add driver documentation
  gpu: host1x: Flesh out kerneldoc

In function submit_create, if nr_cmds or nr_bos is assigned with
negative value, the allocated buffer may be small than intended.
Using this buffer will lead to buffer overflow issue.
Signed-off-by: Kasin Li <donglil@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

In original function amdgpu_bo_list_get, the waiting
for result->lock can be quite long while mutex
bo_list_lock was holding. It can make other tasks
waiting for bo_list_lock for long period.

Secondly, this patch allows several tasks(readers of idr)
to proceed at the same time.

v2: use rcu and kref (Dave Airlie and Christian König)
v3: update v1 commit message (Michel Dänzer)
v4: rebase on upstream (Alex Deucher)
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

v2: Remove duplication of zeroing of bo list (Christian König)
    Move idr_alloc function to end of ioctl (Christian König)
    Call kfree bo_list when amdgpu_bo_list_set return error.
    Combine the previous two patches into this patch.
    Add amdgpu_bo_list_set function prototype.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In fact, it is needed for PCI to work on msm8996 (and probably other
things).  No idea why it was depending on renesas but that doesn't make
any sense.  So drop the dependency.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Buffer object specific resources like pages, domains, sg list
need not be protected with struct_mutex. They can be protected
with a buffer object level lock. This simplifies locking and
makes it easier to avoid potential recursive locking scenarios
for SVM involving mmap_sem and struct_mutex. This also removes
unnecessary serialization when creating buffer objects, and also
between buffer object creation and GPU command submission.
Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org>
[robclark: squash in handling new locking for shrinker]
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Coffee Lake inherit most of Kabylake production
workarounds.

v2: Fix typo on commit message and remove
    WaDisableKillLogic and GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC,
    since as Mika pointed out they shouldn't be here for cfl
    according to BSpec.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497653398-15722-1-git-send-email-rodrigo.vivi@intel.com

This creates a new command submission chunk for amdgpu
to add in and out sync objects around the submission.

Sync objects are managed via the drm syncobj ioctls.

The command submission interface is enhanced with two new
chunks, one for syncobj pre submission dependencies,
and one for post submission sync obj signalling,
and just takes a list of handles for each.

This is based on work originally done by David Zhou at AMD,
with input from Christian Konig on what things should look like.

In theory VkFences could be backed with sync objects and
just get passed into the cs as syncobj handles as well.

NOTE: this interface addition needs a version bump to expose
it to userspace.

TODO: update to dep_sync when rebasing onto amdgpu master.
(with this - r-b from Christian)

v1.1: keep file reference on import.
v2: move to using syncobjs
v2.1: change some APIs to just use p pointer.
v3: make more robust against CS failures, we now add the
wait sems but only remove them once the CS job has been
submitted.
v4: rewrite names of API and base on new syncobj code.
v5: move post deps earlier, rename some apis
v6: lookup post deps earlier, and just replace fences
in post deps stage (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This just splits out the fence depenency checking into it's
own function to make it easier to add semaphore dependencies.

v2: rebase onto other changes.

v1-Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Avoids printing spurious messages like this:
[    3.102059] amdgpu 0000:01:00.0: VM size (-1) must be a power of 2
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Although we use 9 bits of Device ID for identifying PCH, only 8 bits are
stored in dev_priv->pch_id. This makes HAS_PCH_CNP_LP() and
HAS_PCH_SPT_LP() incorrect. Fix this by storing all the 9 bits for the
platforms with LP PCH.

v2: Drop PCH_LPT_LP change (Imre)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: commit ec7e0bb3 ("drm/i915/cnp: Add PCI ID for Cannonpoint LP PCH")
Reported-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497641774-29104-1-git-send-email-dhinakaran.pandiyan@intel.com

During execbuf, a mandatory step is that we add this request (this
fence) to each object's reservation_object. Inside execbuf, we track the
vma, and to add the fence to the reservation_object then means having to
first chase the obj, incurring another cache miss. We can reduce the
 number of cache misses by stashing a pointer to the reservation_object
in the vma itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170616140525.6394-1-chris@chris-wilson.co.uk

If the user requires patching of their batch or auxiliary buffers, we
currently make the alterations on the cpu. If they are active on the GPU
at the time, we wait under the struct_mutex for them to finish executing
before we rewrite the contents. This happens if shared relocation trees
are used between different contexts with separate address space (and the
buffers then have different addresses in each), the 3D state will need
to be adjusted between execution on each context. However, we don't need
to use the CPU to do the relocation patching, as we could queue commands
to the GPU to perform it and use fences to serialise the operation with
the current activity and future - so the operation on the GPU appears
just as atomic as performing it immediately. Performing the relocation
rewrites on the GPU is not free, in terms of pure throughput, the number
of relocations/s is about halved - but more importantly so is the time
under the struct_mutex.

v2: Break out the request/batch allocation for clearer error flow.
v3: A few asserts to ensure rq ordering is maintained
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Currently, the last object in the execlist is the always the batch.
However, when building the batch buffer we often know the batch object
first and if we can use the first slot in the execlist we can emit
relocation instructions relative to it immediately and avoid a separate
pass to adjust the relocations to point to the last execlist slot.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

This simply hides the EAGAIN caused by userptr when userspace causes
resource contention. However, it is quite beneficial with highly
contended userptr users as we avoid repeating the setup costs and
kernel-user context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

When choosing a slot for an execbuffer, we ideally want to use the same
address as last time (so that we don't have to rebind it) and the same
address as expected by the user (so that we don't have to fixup any
relocations pointing to it). If we first try to bind the incoming
execbuffer->offset from the user, or the currently bound offset that
should hopefully achieve the goal of avoiding the rebind cost and the
relocation penalty. However, if the object is not currently bound there
we don't want to arbitrarily unbind an object in our chosen position and
so choose to rebind/relocate the incoming object instead. After we
report the new position back to the user, on the next pass the
relocations should have settled down.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtien@linux.intel.com>

If we take a reference to the object/vma when it is first used in an
execbuf, we can keep that reference until the object's file-local handle
is closed. Thereby saving a frequent ref/unref pair.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

The major scaling bottleneck in execbuffer is the processing of the
execobjects. Creating an auxiliary list is inefficient when compared to
using the execobject array we already have allocated.

Reservation is then split into phases. As we lookup up the VMA, we
try and bind it back into active location. Only if that fails, do we add
it to the unbound list for phase 2. In phase 2, we try and add all those
objects that could not fit into their previous location, with fallback
to retrying all objects and evicting the VM in case of severe
fragmentation. (This is the same as before, except that phase 1 is now
done inline with looking up the VMA to avoid an iteration over the
execobject array. In the ideal case, we eliminate the separate reservation
phase). During the reservation phase, we only evict from the VM between
passes (rather than currently as we try to fit every new VMA). In
testing with Unreal Engine's Atlantis demo which stresses the eviction
logic on gen7 class hardware, this speed up the framerate by a factor of
2.

The second loop amalgamation is between move_to_gpu and move_to_active.
As we always submit the request, even if incomplete, we can use the
current request to track active VMA as we perform the flushes and
synchronisation required.

The next big advancement is to avoid copying back to the user any
execobjects and relocations that are not changed.

v2: Add a Theory of Operation spiel.
v3: Fall back to slow relocations in preparation for flushing userptrs.
v4: Document struct members, factor out eb_validate_vma(), add a few
more comments to explain some magic and hide other magic behind macros.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If we write a relocation into the buffer, we require our own implicit
synchronisation added after the start of the execbuf, outside of the
user's control. As we may end up clflushing, or doing the patch itself
on the GPU, asynchronously we need to look at the implicit serialisation
on obj->resv and hence need to disable EXEC_OBJECT_ASYNC for this
object.

If the user does trigger a stall for relocations, we make sure the stall
is complete enough so that the batch is not submitted before we complete
those relocations.

Fixes: 77ae9957 ("drm/i915: Enable userspace to opt-out of implicit fencing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

We can simplify our tracking of pending writes in an execbuf to the
single bit in the vma->exec_entry->flags, but that requires the
relocation function knowing the object's vma. Pass it along.

Note we have only been using a single bit to track flushing since

commit cc889e0f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jun 13 20:45:19 2012 +0200

    drm/i915: disable flushing_list/gpu_write_list

unconditionally flushed all render caches before the breadcrumb and

commit 6ac42f41
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat Jul 21 12:25:01 2012 +0200

    drm/i915: Replace the complex flushing logic with simple invalidate/flush all

did away with the explicit GPU domain tracking. This was then codified
into the ABI with NO_RELOC in

commit ed5982e6
Author: Daniel Vetter <daniel.vetter@ffwll.ch> # Oi! Patch stealer!
Date:   Thu Jan 17 22:23:36 2013 +0100

    drm/i915: Allow userspace to hint that the relocations were known
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

The advent of full-ppgtt lead to an extra indirection between the object
and its binding. That extra indirection has a noticeable impact on how
fast we can convert from the user handles to our internal vma for
execbuffer. In order to bypass the extra indirection, we use a
resizable hashtable to jump from the object to the per-ctx vma.
rhashtable was considered but we don't need the online resizing feature
and the extra complexity proved to undermine its usefulness. Instead, we
simply reallocate the hastable on demand in a background task and
serialize it before iterating.

In non-full-ppgtt modes, multiple files and multiple contexts can share
the same vma. This leads to having multiple possible handle->vma links,
so we only use the first to establish the fast path. The majority of
buffers are not shared and so we should still be able to realise
speedups with multiple clients.

v2: Prettier names, more magic.
v3: Many style tweaks, most notably hiding the misuse of execobj[].rsvd2
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

The default context is always supported (as it contains the global
hangcheck stats) and the contexts for hangcheck are not limited
to any ring.

This was dropped in 2013 because it was supposed to have been included
with Ben's full-ppgtt patch set. It never landed and the bug remains.

References: https://bugs.freedesktop.org/show_bug.cgi?id=65845
Link: http://patchwork.freedesktop.org/patch/msgid/1372175222-27622-1-git-send-email-mika.kuoppala@intel.comSigned-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170616132849.29597-1-chris@chris-wilson.co.uk

A 2 pixel wide pink strip was observed on the left end of some HDMI
monitors configured in a HDMI mode.

It turned out that we were missing out on configuring AVI infoframes, and
unlike APQ8064, the 8x96 HDMI H/W seems to be sensitive to that.

Add configuration of AVI infoframes. While at it, make sure that
hdmi_audio_update is only called when we've detected that the monitor
supports HDMI.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Without doing anything in unprepare, the HDMI driver isn't able to
switch modes successfully. Calling set_rate with a new rate results
in an un-locked PLL.

If we reset the PLL in unprepare, the PLL is able to lock with the
new rate.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Commit c0c0d9ee ("drm/msm: hdmi audio support") uses logical
OR operators to build up a value to be written in the
REG_HDMI_AUDIO_INFO0 and REG_HDMI_AUDIO_INFO1 registers when it
should have used bitwise operators.
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Fixes: c0c0d9ee ("drm/msm: hdmi audio support")
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

Now that the msm_gem supports an arbitrary number of vma's, we no longer
need to assign an id (index) to each address space.  So rip out the
associated code.
Signed-off-by: Rob Clark <robdclark@gmail.com>

It means we have to do a list traversal where we once had an index into
a table.  But the list will normally have one or two entries.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Pull some of the logic out into msm_gem_new() (since we don't need to
care about the imported-bo case), and don't defer allocating pages.  The
latter is generally a good idea, since if we are using VRAM carveout to
allocate contiguous buffers (ie. no IOMMU), the allocation is more
likely to fail.  So failing at allocation time is a more sane option.
Plus this simplifies things in the next patch.
Signed-off-by: Rob Clark <robdclark@gmail.com>

No functional change, that will come later.  But this will make it
easier to deal with dynamically created address spaces (ie. per-
process pagetables for gpu).
Signed-off-by: Rob Clark <robdclark@gmail.com>