- 04 Jul, 2016 40 commits
-
-
Chen-Yu Tsai authored
The early A13 Q8 tablets all use a Realtek WiFi module connected to USB1. The module is powered by AXP209's LDO3 at 3.3V. Move the related settings from sun5i-a13-q8-tablet.dts to sun5i-q8-common.dtsi, for all q8-based tablets. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Luo Yi authored
Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn . This board is nearly a clone of the Lemaker's Bananapro, but differ with the wlan chipset connection and i2s pinout. And I also enable the integrated audio codec on default. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Some of the sun8i q8 boards have an usb wifi controller, on other variants this will result in an used usb root-hub, but the best way to deal with wifi on this boards is to simply let the kernel auto-detect usb or sdio wifi controllers. This has been tested on an a23 based q8 tablet with a RTL8188ETV wifi controller. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Move the mmc nodes above the ohci nodes for proper ordering by name. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Move the &pio node below the mmc nodes for proper ordering by name. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Boris Brezillon authored
Add NAND Flash controller node definition to the A20 SoC. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Boris Brezillon authored
Add NAND Flash controller node definition to the A10 SoC. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add pmic / regulator nodes to Mele M9 dts. Note both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is marked as regulator-always-on. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add pmic / regulator nodes to Mele A1000G quad dts. Note both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is marked as regulator-always-on. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
The blue led on the Mele M9 is wired to light up as soon as the board has powered (it will be on while the gpio is still in input / floating mode), also its location on the top-set box clearly signals "power led". Until now we've been treating this as a generic usr function led, which means that when you plug power into the top-set box, the power-led lights and then turns off as soon as the kernel loads, which looks wrong. This renames the led from m9:blue:usr to m9:blue:pwr and marks it as default on, fixing this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Chen-Yu Tsai <wens@csie.org>
-
Hans de Goede authored
The blue led on the Mele A1000 is wired to light up as soon as the board has powered (it will be on while the gpio is still in input / floating mode), also its location on the top-set box clearly signals "power led". Until now we've been treating this as a generic usr function led, which means that when you plug power into the top-set box, the power-led lights and then turns off as soon as the kernel loads, which looks wrong. This renames the led from m9:blue:usr to a1000g:blue:pwr (fixing a copy and paste error in the prefix while at it) and marks it as default on, fixing this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Chen-Yu Tsai <wens@csie.org>
-
Hans de Goede authored
The blue led on the Mele A1000 is wired to light up as soon as the board has powered (it will be on while the gpio is still in input / floating mode), also its location on the top-set box clearly signals "power led". Until now we've been treating this as a generic usr function led, which means that when you plug power into the top-set box, the power-led lights and then turns off as soon as the kernel loads, which looks wrong. This renames the led from a1000:blue:usr to a1000:blue:pwr and marks it as default on, fixing this. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Chen-Yu Tsai <wens@csie.org>
-
Hans de Goede authored
The Polaroid mid2809pxe04 tablet uses an sdio esp8089 wifi chip, so ehci0 is not used and should be disabled. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Now that we've all the necessary bits in place we can enable full otg support on these tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Now that we've all the necessary bits in place we can enable full otg support on these tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add a node describing the drivebus regulator which is an (optional) part of the axp221/axp223 pmic. Since this regulator may not be available at all depending on the board, mark it as disabled by default. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Add a node describing the (optional) usbpower-supply of the axp221 / axp223 pmic. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Use of these as regulators conflicts with use of the gpio pins as gpios, so disabled the ldo_io# regulators by default, this avoids the regulator core touching them when the pins are used as gpios. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Aleksei Mamlin authored
No functional change. Re-order sun7i pinctrl nodes alphabetically. Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Aleksei Mamlin authored
No functional change. Re-order sun4i pinctrl nodes alphabetically. Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Update the simplefb nodes for hdmi / tv-encoder out to point to tcon0_ch1 instead of tcon0_ch0 as tcon clock. While at it fix the clocks lines being longer than 80 chars. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
Update the simplefb nodes for hdmi / tv-encoder out to point to tcon0_ch1 instead of tcon0_ch0 as tcon clock. While at it fix the clocks lines being longer than 80 chars. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
It seems that recent kernels have a shorter timeout when scanning for ethernet phys causing us to hit a timeout on boards where the phy's regulator gets enabled just before scanning, which leads to non working ethernet. A 10ms startup delay seems to be enough to fix it, this commit adds a 20ms startup delay just to be safe. This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board, both of which have non-working ethernet on recent kernels without this fix. Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
sunxi-common-regulators.dtsi provided dummy regulators vcc3v0, vcc3v3, vcc5v0. 3.0V/3.3V and 5.0V are commonly used voltages in Allwinner devices. These dummy regulators provide a stand-in when bindings that require one, but the real regulator is not supported yet. Since these are no longer needed, we can drop the include file. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
sunxi-common-regulators.dtsi provided dummy regulators vcc3v0, vcc3v3, vcc5v0. 3.0V/3.3V and 5.0V are commonly used voltages in Allwinner devices. These dummy regulators provide a stand-in when bindings that require one, but the real regulator is not supported yet. Since these are no longer needed, we can drop the include file by copying over reg_usb1_vbus. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Hans de Goede authored
It seems that the wifi chip is powered by both ldo3 and ldo4 tied together and that using only one results in the wifi-chip dropping of the USB bus sometimes. Ideally we would have a proper way of modelling this (this is being worked on), but currently we do not. This is not an issue since we need to keep these regulators always-on anyways, due to these boards crashing when ldo3/4 get turned back on after having been turned off. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The BPI-M2+ is an H3 development board. It is a smaller form factor than the original BPI-M2, with the new H3 SoC. It has 1GB DRAM, 8GB eMMC, a micro SD card slot, HDMI output, 2 USB host connector and 1 USB OTG connector, an IR receiver, WiFi+BT based on Ampak AP6212. The board also has a 3 pin header for (debug) UART, a 40 pin GPIO header based on the Raspberry Pi B+, but the peripheral signals are not the same, and an FPC connector for connecting BPI's camera. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Add uart1 pins for 4 pin (RX/TX/RTS/CTS) mode. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Move uart0 pins to sort the list of pin settings in alphabetical order. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The AXP809 PMIC is the primary PMIC. It provides various supply voltages for the SoC and other peripherals. The PMIC's interrupt line is connected to NMI pin of the SoC. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The AXP809 PMIC is the primary PMIC. It provides various supply voltages for the SoC and other peripherals. The PMIC's interrupt line is connected to NMI pin of the SoC. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The AXP809 PMIC is used with the Allwinner A80 SoC, along with an AXP806 PMIC as a slave. This patch adds a dtsi file for all the common bindings and default values unrelated to board design. Currently this is just listing all the regulator nodes. The regulators are initialized based on their device node names. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Michal Suchanek authored
spi2 is available on the UEXT connector Signed-off-by:
Michal Suchanek <hramrach@gmail.com> [Maxime: Fixed the node order] Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Michal Suchanek authored
Used on A10s Olinuxino. Signed-off-by:
Michal Suchanek <hramrach@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
Q8 form factor A13 tablets have a 7" LCD panel. Unfortunately we don't know the exact model of the panel. Just pick a panel with display timings close to what we know. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The Q8 tablets use the audio codec to provide audio output via a headphone jack or a small mono speaker. A GPIO output is used to control speaker amp. The tablets may or may not have an internal microphone. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
On the A13 Q8 tablets, the PMIC's USB power supply (VBUS) is connected to the external OTG port. This can be used to provide power and OTG VBUS sensing. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
The output pin of LDO is also a GPIO pin, and the on/off settings of the regulator are actually pinmux settings. Disable it by default so it doesn't conflict with GPIO usage. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
Most of the display engine is shared between the R8 and the A13. Move the common parts to the Á13 DTSI. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Maxime Ripard authored
The RGB bus can be used in several configurations, one of which being the RGB666. Add a pinctrl group for that case. Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-