Pull modules fix from Jessica Yu:

 - Build fix for cfi_init() when CONFIG_MODULE_UNLOAD=n

* tag 'modules-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: fix clang CFI with MODULE_UNLOAD=n

Pull arm64 fixes from Catalin Marinas:

 - Fix CMA gigantic page order for 16K/64K page sizes

 - Fix section mismatch error in drivers/acpi/arm64/gtdt.c

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  acpi/arm64: fix next_platform_timer() section mismatch error
  arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE

Merge tag 'platform-drivers-x86-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A second (small) set of pdx86 bug-fixes and new hardware ids for 5.15"

* tag 'platform-drivers-x86-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: int1092: Fix non sequential device mode handling
  platform/x86: intel_skl_int3472: Correct null check
  platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2
  platform/x86: amd-pmc: Add alternative acpi id for PMC controller
  platform/x86: intel_scu_ipc: Update timeout value in comment
  platform/x86: intel_scu_ipc: Increase virtual timeout to 10s
  platform/x86: intel_scu_ipc: Fix busy loop expiry time
  platform/x86: dell: Make DELL_WMI_PRIVACY depend on DELL_WMI
  platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributes
  platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call

Fix modpost Section mismatch error in next_platform_timer().

  [...]
  WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
  The function next_platform_timer() references
  the variable __initdata acpi_gtdt_desc.
  This is often because next_platform_timer lacks a __initdata
  annotation or the annotation of acpi_gtdt_desc is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
  The function next_platform_timer() references
  the variable __initdata acpi_gtdt_desc.
  This is often because next_platform_timer lacks a __initdata
  annotation or the annotation of acpi_gtdt_desc is wrong.

  ERROR: modpost: Section mismatches detected.
  Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
  make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1
  make[1]: *** Deleting file 'vmlinux.symvers'
  make: *** [Makefile:1176: vmlinux] Error 2
  [...]

Fixes: a712c3ed ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20210823092526.2407526-1-liu.yun@linux.devSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit fixes from Shuah Khan:

 - Fixes to address the structleak plugin causing the stack frame size
   to grow immensely when used with KUnit. Fixes include adding a new
   makefile to disable structleak and using it from KUnit iio, device
   property, thunderbolt, and bitfield tests to disable it.

 - KUnit framework reference count leak in kfree_at_end

 - KUnit tool fix to resolve conflict between --json and --raw_output
   and generate correct test output in either case.

 - kernel-doc warnings due to mismatched arg names

* tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: fix kernel-doc warnings due to mismatched arg names
  bitfield: build kunit tests without structleak plugin
  thunderbolt: build kunit tests without structleak plugin
  device property: build kunit tests without structleak plugin
  iio/test-format: build kunit tests without structleak plugin
  gcc-plugins/structleak: add makefile var for disabling structleak
  kunit: fix reference count leak in kfree_at_end
  kunit: tool: better handling of quasi-bool args (--json, --raw_output)

Pull cgroup fixes from Tejun Heo:
 "All documentation / comment updates"

* 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroupv2, docs: fix misinformation in "device controller" section
  cgroup/cpuset: Change references of cpuset_mutex to cpuset_rwsem
  docs/cgroup: remove some duplicate words

Pull workqueue fixes from Tejun Heo:
 "One patch to add a missing __printf annotation and the other to enable
  deferred printing for debug dumps to avoid deadlocks when triggered
  from some contexts (e.g. console drivers)"

* 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix state-dump console deadlock
  workqueue: annotate alloc_workqueue() as printf

Pull btrfs fixes from David Sterba:
 "A few more error handling fixes, stemming from code inspection, error
  injection or fuzzing"

* tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix abort logic in btrfs_replace_file_extents
  btrfs: check for error when looking up inode during dir entry replay
  btrfs: unify lookup return value when dir entry is missing
  btrfs: deal with errors when adding inode reference during log replay
  btrfs: deal with errors when replaying dir entry during log replay
  btrfs: deal with errors when checking if a dir entry exists during log replay
  btrfs: update refs for any root except tree log roots
  btrfs: unlock newly allocated extent buffer after error

For non-4K PAGE_SIZE configs, the largest gigantic huge page size is
CONT_PMD_SHIFT order. On arm64 with 64K PAGE_SIZE, the gigantic page is
16G. Therefore, one should be able to specify 'hugetlb_cma=16G' on the
kernel command line so that one gigantic page can be allocated from CMA.
However, when adding such an option the following message is produced:

hugetlb_cma: cma area should be at least 8796093022208 MiB

This is because the calculation for non-4K gigantic page order is
incorrect in the arm64 specific routine arm64_hugetlb_cma_reserve().

Fixes: abb7962a ("arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs")
Cc: <stable@vger.kernel.org> # 5.9.x
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20211005202529.213812-1-mike.kravetz@oracle.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Console drivers often queue work while holding locks also taken in their
console write paths, something which can lead to deadlocks on SMP when
dumping workqueue state (e.g. sysrq-t or on suspend failures).

For serial console drivers this could look like:

	CPU0				CPU1
	----				----

	show_workqueue_state();
	  lock(&pool->lock);		<IRQ>
	  				  lock(&port->lock);
					  schedule_work();
					    lock(&pool->lock);
	  printk();
	    lock(console_owner);
	    lock(&port->lock);

where workqueues are, for example, used to push data to the line
discipline, process break signals and handle modem-status changes. Line
disciplines and serdev drivers can also queue work on write-wakeup
notifications, etc.

Reworking every console driver to avoid queuing work while holding locks
also taken in their write paths would complicate drivers and is neither
desirable or feasible.

Instead use the deferred-printk mechanism to avoid printing while
holding pool locks when dumping workqueue state.

Note that there are a few WARN_ON() assertions in the workqueue code
which could potentially also trigger a deadlock. Hopefully the ongoing
printk rework will provide a general solution for this eventually.

This was originally reported after a lockdep splat when executing
sysrq-t with the imx serial driver.

Fixes: 3494fc30 ("workqueue: dump workqueues on sysrq-t")
Cc: stable@vger.kernel.org	# 4.0
Reported-by: Fabio Estevam <festevam@denx.de>
Tested-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>

SAR information from BIOS may come in non sequential pattern.

To overcome the issue, a check is made to extract the right SAR
information using the device mode which is currently being used.

Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Shravan S <s.shravan@intel.com>
Link: https://lore.kernel.org/r/20211006073525.1332925-1-s.shravan@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

The int3472-discrete driver can enter an error path after initialising
int3472->clock.ena_gpio, but before it has registered the clock. This will
cause a NULL pointer dereference, because clkdev_drop() is not null aware.
Instead of guarding the call to skl_int3472_unregister_clock() by checking
for .ena_gpio, check specifically for the presence of the clk_lookup, which
will guarantee clkdev_create() has already been called.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214453
Fixes: 7540599a ("platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()")
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20211008224608.415949-1-djrscally@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

This works just fine on my system.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211005044855.1429724-1-zephaniah@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The Surface Laptop 4 AMD has used the AMD0005 to identify this
controller instead of using the appropriate ACPI ID AMDI0005.  Include
AMD0005 in the acpi id list.

Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd
Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Sachi King <nakato@nakato.io>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211002041840.2058647-1-nakato@nakato.ioSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbb ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .

Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Commit a7d53dbb ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") states that the recommended timeout range
is 5-10 seconds. Adjust the timeout value to the higher of those i.e 10
seconds, to account for situations where the 5 seconds is insufficient
for disconnect command success.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-3-pmalani@chromium.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The macro IPC_TIMEOUT is already in jiffies (it is also used like that
elsewhere in the file when calling wait_for_completion_timeout()). Don’t
convert it using helper functions for the purposes of calculating the
busy loop expiry time.

Fixes: e7b7ab38 (“platform/x86: intel_scu_ipc: Sleeping is fine when polling”)
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-2-pmalani@chromium.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>

DELL_WMI_PRIVACY is a feature toggle for the main dell-wmi driver,
so it must depend on the Kconfig option which enables the main
dell-wmi driver.

Fixes: 8af9fa37 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211011132338.407571-1-hdegoede@redhat.com

Fix shift argument for function rol32(). It should be provided in bits,
while was provided in bytes.

Fixes: 86148190 ("platform/mellanox: mlxreg-io: Add support for complex attributes")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-3-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Change kstrtou32() argument 'base' to be zero instead of 'len'.
It works by chance for setting one bit value, but it is not supposed to
work in case value passed to mlxreg_io_attr_store() is greater than 1.

It works for example, for:
echo 1 > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable
But it will fail for:
echo n > /sys/devices/platform/mlxplat/mlxreg-io/hwmon/.../jtag_enable,
where n > 1.

The flow for input buffer conversion is as below:
_kstrtoull(const char *s, unsigned int base, unsigned long long *res)
calls:
rv = _parse_integer(s, base, &_res);

For the second case, where n > 1:
- _parse_integer() converts 's' to 'val'.
  For n=2, 'len' is set to 2 (string buffer is 0x32 0x0a), for n=3
  'len' is set to 3 (string buffer 0x33 0x0a), etcetera.
- 'base' is equal or greater then '2' (length of input buffer).

As a result, _parse_integer() exits with result zero (rv):
	rv = 0;
	while (1) {
		...
		if (val >= base)-> (2 >= 2)
			break;
		...
		rv++;
		...
	}

And _kstrtoull() in their turn will fail:
	if (rv == 0)
		return -EINVAL;

Fixes: 5ec4a8ac ("platform/mellanox: Introduce support for Mellanox register access driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927142214.2613929-2-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Pull powerpc fixes from Michael Ellerman:
 "A bit of a big batch, partly because I didn't send any last week, and
  also just because the BPF fixes happened to land this week.

  Summary:

   - Fix a regression hit by the IPR SCSI driver, introduced by the
     recent addition of MSI domains on pseries.

   - A big series including 8 BPF fixes, some with potential security
     impact and the rest various code generation issues.

   - Fix our program check assembler entry path, which was accidentally
     jumping into a gas macro and generating strange stack frames, which
     could confuse find_bug().

   - A couple of fixes, and related changes, to fix corner cases in our
     machine check handling.

   - Fix our DMA IOMMU ops, which were not always returning the optimal
     DMA mask, leading to at least one device falling back to 32-bit DMA
     when it shouldn't.

   - A fix for KUAP handling on 32-bit Book3S.

   - Fix crashes seen when kdumping on some pseries systems.

  Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
  Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
  Christoph Hellwig, Johan Almbladh, Stan Johnson"

* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
  powerpc/32s: Fix kuap_kernel_restore()
  powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
  powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
  powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
  powerpc/64: warn if local irqs are enabled in NMI or hardirq context
  powerpc/traps: do not enable irqs in _exception
  powerpc/64s: fix program check interrupt emergency stack path
  powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
  powerpc/bpf ppc32: Fix JMP32_JSET_K
  powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
  powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
  powerpc/security: Add a helper to query stf_barrier type
  powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf: Fix BPF_MOD when imm == 1
  powerpc/bpf: Validate branch ranges
  powerpc/lib: Add helper to check if offset is within conditional branch range
  powerpc/iommu: Report the correct most efficient DMA mask for PCI devices

Pull objtool fixes from Borislav Petkov:

 - Remove an extra section.len member in favour of section.sh_size

 - Align .altinstructions section creation with the kernel's by creating
   them with entry size of 0

 - Fix objtool to convert a reloc symbol to a section offset and not to
   not warn about not knowing how

* tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Remove redundant 'len' field from struct section
  objtool: Make .altinstructions section entry size consistent
  objtool: Remove reloc symbol type checks in get_alt_entry()

Pull x86 fixes from Borislav Petkov:

 - A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
   out due to historical reasons and 64-bit kernels reject them

 - A fix to clear X86_FEATURE_SMAP when support for is not
   config-enabled

 - Three fixes correcting misspelled Kconfig symbols used in code

 - Two resctrl object cleanup fixes

 - Yet another attempt at fixing the neverending saga of botched x86
   timers, this time because some incredibly smart hardware decides to
   turn off the HPET timer in a low power state - who cares if the OS is
   relying on it...

 - Check the full return value range of an SEV VMGEXIT call to determine
   whether it returned an error

* tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Restore the masking out of reserved MXCSR bits
  x86/Kconfig: Correct reference to MWINCHIP3D
  x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
  x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
  x86/entry: Correct reference to intended CONFIG_64_BIT
  x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu()
  x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
  x86/hpet: Use another crystalball to evaluate HPET usability
  x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes and one leak fix for the core"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxcpld: Modify register setting for 400KHz frequency
  i2c: mlxcpld: Fix criteria for frequency setting
  i2c: mediatek: Add OFFSET_EXT_CONF setting back
  i2c: acpi: fix resource leak in reconfiguration device addition

Pull SCSI fixes from James Bottomley:
 "Five fixes, all in drivers.

  The big change is the UFS task management rework, with lpfc next and
  the rest being fairly minor and obvious fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: Fix iscsi_task use after free
  scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling
  scsi: elx: efct: Delete stray unlock statement
  scsi: ufs: core: Fix task management completion
  scsi: acornscsi: Remove scsi_cmd_to_tag() reference

Pull block fixes from Jens Axboe:
 "Two small fixes for this release:

   - Add missing QUEUE_FLAG_HCTX_ACTIVE in the debugfs handling
     (Johannes)

   - Fix double free / UAF issue in __alloc_disk_node (Tetsuo)"

* tag 'block-5.15-2021-10-09' of git://git.kernel.dk/linux-block:
  block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output
  block: genhd: fix double kfree() in __alloc_disk_node()

Pull ksmbd fixes from Steve French:
 "Six fixes for the ksmbd kernel server, including two additional
  overflow checks, a fix for oops, and some cleanup (e.g. remove dead
  code for less secure dialects that has been removed)"

* tag '5.15-rc4-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix oops from fuse driver
  ksmbd: fix version mismatch with out of tree
  ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req()
  ksmbd: remove the leftover of smb2.0 dialect support
  ksmbd: check strictly data area in ksmbd_smb2_check_message()
  ksmbd: add the check to vaildate if stream protocol length exceeds maximum value

Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of fixes (along with the necessory cleanup) to our VDSO, to
   avoid a locking during OOM and to prevent the text from overflowing
   into the data page

 - A fix to checksyscalls to teach it about our rv32 UABI

 - A fix to add clone3() to the rv32 UABI, which was pointed out by
   checksyscalls

 - A fix to properly flush the icache on the local CPU in addition to
   the remote CPUs

* tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  checksyscalls: Unconditionally ignore fstat{,at}64
  riscv: Flush current cpu icache before other cpus
  RISC-V: Include clone3() on rv32
  riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
  riscv/vdso: Move vdso data page up front
  riscv/vdso: Refactor asm/vdso.h

Pull s390 fixes from Vasily Gorbik:

 - Fix potential memory leak on a error path in eBPF

 - Fix handling of zpci device on reserve

* tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix zpci_zdev_put() on reserve
  bpf, s390: Fix potential memory leak about jit_data

Pull xtensa fixes from Max Filippov:

 - fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage

 - fix reset handler for xtfpga boards

* tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: xtfpga: Try software restart before simulating CPU reset
  xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
  xtensa: call irqchip_init only when CONFIG_USE_OF is selected
  xtensa: use CONFIG_USE_OF instead of CONFIG_OF

Pull xen fixes from Juergen Gross:

 - fix two minor issues in the Xen privcmd driver plus a cleanup patch
   for that driver

 - fix multiple issues related to running as PVH guest and some related
   earlyprintk fixes for other Xen guest types

 - fix an issue introduced in 5.15 the Xen balloon driver

* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix cancelled balloon action
  xen/x86: adjust data placement
  x86/PVH: adjust function/data placement
  xen/x86: hook up xen_banner() also for PVH
  xen/x86: generalize preferred console model from PV to PVH Dom0
  xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
  xen/x86: allow "earlyprintk=xen" to work for PV Dom0
  xen/x86: make "earlyprintk=xen" work better for PVH Dom0
  xen/x86: allow PVH Dom0 without XEN_PV=y
  xen/x86: prevent PVH type from getting clobbered
  xen/privcmd: drop "pages" parameter from xen_remap_pfn()
  xen/privcmd: fix error handling in mmap-resource processing
  xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages

Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "There is one build fix for Arm platforms that ended up impacting most
  architectures because of the way the drivers/firmware Kconfig file is
  wired up:

  The CONFIG_QCOM_SCM dependency have caused a number of randconfig
  regressions over time, and some still remain in v5.15-rc4. The fix we
  agreed on in the end is to make this symbol selected by any driver
  using it, and then building it even for non-Arm platforms with
  CONFIG_COMPILE_TEST.

  To make this work on all architectures, the drivers/firmware/Kconfig
  file needs to be included for all architectures to make the symbol
  itself visible.

  In a separate discussion, we found that a sound driver patch that is
  pending for v5.16 needs the same change to include this Kconfig file,
  so the easiest solution seems to have my Kconfig rework included in
  v5.15.

  Finally, the branch also includes a small unrelated build fix for
  NOMMU architectures"

Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/

* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
  qcom_scm: hide Kconfig symbol
  firmware: include drivers/firmware/Kconfig unconditionally

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent ACPI-related regression in the PCI subsystem that
  introduced a NULL pointer dereference possible to trigger from
  user space via sysfs on some systems"

* tag 'acpi-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: ACPI: Check parent pointer in acpi_pci_find_companion()

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.15-rc5 that resolve a number of
  reported issues:

   - gadget driver fixes

   - xhci build warning fixes

   - build configuration fix

   - cdc-acm tty handling fixes

   - cdc-wdm fix

   - typec fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix break reporting
  USB: cdc-acm: fix racy tty buffer accesses
  usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize
  usb: cdc-wdm: Fix check for WWAN
  usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle
  usb: typec: tcpm: handle SRC_STARTUP state if cc changes
  usb: typec: tcpci: don't handle vSafe0V event if it's not enabled
  usb: typec: tipd: Remove dependency on "connector" child fwnode
  Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
  usb: dwc3: gadget: Revert "set gadgets parent to the right controller"
  usb: xhci: tegra: mark PM functions as __maybe_unused

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes:

   - meson-gx: Fix read/write access for dram-access-quirk

   - sdhci-of-at91: Fix calibration sequence"

* tag 'mmc-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
  mmc: sdhci-of-at91: replace while loop with read_poll_timeout
  mmc: sdhci-of-at91: wait for calibration done before proceed

Pull drm fixes from Dave Airlie:
 "I've returned from my tropical island retreat, even managed to bring
  one of my kids on a dive with some turtles. Thanks to Daniel for doing
  last week's work.

  Otherwise this is the weekly fixes pull, it's a bit bigger because the
  vc4 reverts in your tree caused some problems with fixes in the
  drm-misc tree so it got left out last week, so this week has the misc
  fixes rebased without the vc4 pieces.

  Otherwise it's i915, amdgpu with the usual fixes and a scattering over
  other drivers.

  I expect things should calm down a bit more next week.

  core:
   - Kconfig fix for fb_simple vs simpledrm.

  i915:
   - Fix RKL HDMI audio
   - Fix runtime pm imbalance on i915_gem_shrink() error path
   - Fix Type-C port access before hw/sw state sync
   - Fix VBT backlight struct version/size check
   - Fix VT-d async flip on SKL/BXT with plane stretch workaround

  amdgpu:
   - DCN 3.1 DP alt mode fixes
   - S0ix gfxoff fix
   - Fix DRM_AMD_DC_SI dependencies
   - PCIe DPC handling fix
   - DCN 3.1 scaling fix
   - Documentation fix

  amdkfd:
   - Fix potential memory leak
   - IOMMUv2 init fixes

  vc4 (there were some hdmi fixes but things got reverted, sort it out
       later):
   - compiler fix

  nouveau:
   - Cursor fix
   - Fix ttm buffer moves for ampere gpu's by adding minimal
     acceleration support.
   - memory leak fixes

  rockchip:
   - crtc/clk fixup

  panel:
   - ili9341 Fix DT bindings indent
   - y030xx067a - yellow tint init seq fix

  gbefb:
   - Fix gbefb when built with COMPILE_TEST"

* tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits)
  drm/amd/display: Fix detection of 4 lane for DPALT
  drm/amd/display: Limit display scaling to up to 4k for DCN 3.1
  drm/amd/display: Skip override for preferred link settings during link training
  drm/nouveau/debugfs: fix file release memory leak
  drm/nouveau/kms/nv50-: fix file release memory leak
  drm/nouveau: avoid a use-after-free when BO init fails
  DRM: delete DRM IRQ legacy midlayer docs
  video: fbdev: gbefb: Only instantiate device when built for IP32
  fbdev: simplefb: fix Kconfig dependencies
  drm/panel: abt-y030xx067a: yellow tint fix
  dt-bindings: panel: ili9341: correct indentation
  drm/nouveau/fifo/ga102: initialise chid on return from channel creation
  drm/rockchip: Update crtc fixup to account for fractional clk change
  drm/nouveau/ga102-: support ttm buffer moves via copy engine
  drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows
  drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
  drm/vc4: hdmi: Remove unused struct
  drm/kmb: Enable alpha blended second plane
  drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
  drm/amdgpu: init iommu after amdkfd device init
  ...

It made -Werror sad.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Ser Olmy reported a boot failure:

  init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \
	  in libc-2.33.so[b7bed000+156000]
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  CPU: 0 PID: 1 Comm: init Tainted: G        W         5.14.9 #1
  Hardware name: Hewlett-Packard HP PC/HP Board, BIOS  JD.00.06 12/06/2001
  Call Trace:
   dump_stack_lvl
   dump_stack
   panic
   do_exit.cold
   do_group_exit
   get_signal
   arch_do_signal_or_restart
   ? force_sig_info_to_task
   ? force_sig
   exit_to_user_mode_prepare
   syscall_exit_to_user_mode
   do_int80_syscall_32
   entry_INT80_32

on an old 32-bit Intel CPU:

  vendor_id       : GenuineIntel
  cpu family      : 6
  model           : 6
  model name      : Celeron (Mendocino)
  stepping        : 5
  microcode       : 0x3

Ser bisected the problem to the commit in Fixes.

tglx suggested reverting the rejection of invalid MXCSR values which
this commit introduced and replacing it with what the old code did -
simply masking them out to zero.

Further debugging confirmed his suggestion:

  fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf
  WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540

so restore the original behavior only for 32-bit kernels where you have
ancient machines with buggy hardware. For 32-bit programs on 64-bit
kernels, user space which supplies wrong MXCSR values is considered
malicious so fail the sigframe restoration there.

Fixes: 6f9866a1 ("x86/fpu/signal: Let xrstor handle the features to init")
Reported-by: Ser Olmy <ser.olmy@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ser Olmy <ser.olmy@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YVtA67jImg3KlBTw@zn.tnic

Merge tag 'amd-drm-fixes-5.15-2021-10-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.15-2021-10-06:

amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix

amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com