- 16 Dec, 2017 39 commits
-
-
Sasha Levin authored
This reverts commit cabab3f9. Not needed for < 4.9. Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sasha Levin authored
This reverts commit dadab2d4. Not required on < 4.10. Signed-off-by:
-
Sasha Levin authored
This reverts commit 82f260d4. Not required on < 4.10. Signed-off-by:
-
Kirill A. Shutemov authored
commit c0c379e2 upstream. Dave noticed that after fixing MADV_DONTNEED vs numa balancing race the last pmdp_huge_get_and_clear_notify() user is gone. Let's drop the helper. Link: http://lkml.kernel.org/r/20170306112047.24809-1-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [jwang: adjust context for 4.4] Signed-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit ced10803 upstream. In case prot_numa, we are under down_read(mmap_sem). It's critical to not clear pmd intermittently to avoid race with MADV_DONTNEED which is also under down_read(mmap_sem): CPU0: CPU1: change_huge_pmd(prot_numa=1) pmdp_huge_get_and_clear_notify() madvise_dontneed() zap_pmd_range() pmd_trans_huge(*pmd) == 0 (without ptl) // skip the pmd set_pmd_at(); // pmd is re-established The race makes MADV_DONTNEED miss the huge pmd and don't clear it which may break userspace. Found by code analysis, never saw triggered. Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
commit 0a85e51d upstream. Patch series "thp: fix few MADV_DONTNEED races" For MADV_DONTNEED to work properly with huge pages, it's critical to not clear pmd intermittently unless you hold down_write(mmap_sem). Otherwise MADV_DONTNEED can miss the THP which can lead to userspace breakage. See example of such race in commit message of patch 2/4. All these races are found by code inspection. I haven't seen them triggered. I don't think it's worth to apply them to stable@. This patch (of 4): Restructure code in preparation for a fix. Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.comSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Stephen Hemminger authored
commit f1c635b4 upstream. Hyper-V host emulation of SCSI for virtual DVD device reports SCSI version 0 (UNKNOWN) but is still capable of supporting REPORTLUN. Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11 successfully with virtual DVD ROM device. What happens is that the SCSI scan process falls back to doing sequential probing by INQUIRY. But the storvsc driver has a previous workaround that masks/blocks all errors reports from INQUIRY (or MODE_SENSE) commands. This workaround causes the scan to then populate a full set of bogus LUN's on the target and then sends kernel spinning off into a death spiral doing block reads on the non-existent LUNs. By setting the correct blacklist flags, the target with the DVD device is scanned with REPORTLUN and that works correctly. Patch needs to go in current 4.11, it is safe but not necessary in older kernels. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Russell King authored
commit 3aaf33be upstream. When qemu starts a kernel in a bare environment, the default SCR has the AW and FW bits clear, which means that the kernel can't modify the PSR A or PSR F bits, and means that FIQs and imprecise aborts are always masked. When running uboot under qemu, the AW and FW SCR bits are set, and the kernel functions normally - and this is how real hardware behaves. Fix this for qemu by ignoring the FIQ bit. Fixes: 8bafae20 ("ARM: BUG if jumping to usermode address in kernel mode") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Cc: Alex Shi <alex.shi@linaro.org> Signed-off-by:
-
Russell King authored
commit 8bafae20 upstream. Detect if we are returning to usermode via the normal kernel exit paths but the saved PSR value indicates that we are in kernel mode. This could occur due to corrupted stack state, which has been observed with "ftracetest". This ensures that we catch the problem case before we get to user code. Signed-off-by:
-
Dave Martin authored
commit 071b6d4a upstream. Currently, loading of a task's fpsimd state into the CPU registers is skipped if that task's state is already present in the registers of that CPU. However, the code relies on the struct fpsimd_state * (and by extension struct task_struct *) to unambiguously identify a task. There is a particular case in which this doesn't work reliably: when a task exits, its task_struct may be recycled to describe a new task. Consider the following scenario: 1) Task P loads its fpsimd state onto cpu C. per_cpu(fpsimd_last_state, C) := P; P->thread.fpsimd_state.cpu := C; 2) Task X is scheduled onto C and loads its fpsimd state on C. per_cpu(fpsimd_last_state, C) := X; X->thread.fpsimd_state.cpu := C; 3) X exits, causing X's task_struct to be freed. 4) P forks a new child T, which obtains X's recycled task_struct. T == X. T->thread.fpsimd_state.cpu == C (inherited from P). 5) T is scheduled on C. T's fpsimd state is not loaded, because per_cpu(fpsimd_last_state, C) == T (== X) && T->thread.fpsimd_state.cpu == C. (This is the check performed by fpsimd_thread_switch().) So, T gets X's registers because the last registers loaded onto C were those of X, in (2). This patch fixes the problem by ensuring that the sched-in check fails in (5): fpsimd_flush_task_state(T) is called when T is forked, so that T->thread.fpsimd_state.cpu == C cannot be true. This relies on the fact that T is not schedulable until after copy_thread() completes. Once T's fpsimd state has been loaded on some CPU C there may still be other cpus D for which per_cpu(fpsimd_last_state, D) == &X->thread.fpsimd_state. But D is necessarily != C in this case, and the check in (5) must fail. An alternative fix would be to do refcounting on task_struct. This would result in each CPU holding a reference to the last task whose fpsimd state was loaded there. It's not clear whether this is preferable, and it involves higher overhead than the fix proposed in this patch. It would also move all the task_struct freeing work into the context switch critical section, or otherwise some deferred cleanup mechanism would need to be introduced, neither of which seems obviously justified. Fixes: 005f78cd ("arm64: defer reloading a task's FPSIMD state to userland resume") Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: word-smithed the comment so it makes more sense] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Andrew Honig authored
commit d59d51f0 upstream. This fixes CVE-2017-1000407. KVM allows guests to directly access I/O port 0x80 on Intel hosts. If the guest floods this port with writes it generates exceptions and instability in the host kernel, leading to a crash. With this change guest writes to port 0x80 on Intel will behave the same as they currently behave on AMD systems. Prevent the flooding by removing the code that sets port 0x80 as a passthrough port. This is essentially the same as upstream patch 99f85a28, except that patch was for AMD chipsets and this patch is for Intel. Signed-off-by:
Andrew Honig <ahonig@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Fixes: fdef3ad1 ("KVM: VMX: Enable io bitmaps to avoid IO port 0x80 VMEXITs") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Kristina Martsenko authored
commit 26aa7b3b upstream. VTTBR_BADDR_MASK is used to sanity check the size and alignment of the VTTBR address. It seems to currently be off by one, thereby only allowing up to 47-bit addresses (instead of 48-bit) and also insufficiently checking the alignment. This patch fixes it. As an example, with 4k pages, before this patch we have: PHYS_MASK_SHIFT = 48 VTTBR_X = 37 - 24 = 13 VTTBR_BADDR_SHIFT = 13 - 1 = 12 VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000 Which is wrong, because the mask doesn't allow bit 47 of the VTTBR address to be set, and only requires the address to be 12-bit (4k) aligned, while it actually needs to be 13-bit (8k) aligned because we concatenate two 4k tables. With this patch, the mask becomes 0x0000ffffffffe000, which is what we want. Fixes: 0369f6a3 ("arm64: KVM: EL2 register definitions") Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Laurent Caumont authored
commit 6d33377f upstream. Signed-off-by:
Laurent Caumont <lcaumont2@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Marek Szyprowski authored
commit 120a264f upstream. When no IOMMU is available, all GEM buffers allocated by Exynos DRM driver are contiguous, because of the underlying dma_alloc_attrs() function provides only such buffers. In such case it makes no sense to keep BO_NONCONTIG flag for the allocated GEM buffers. This allows to avoid failures for buffer contiguity checks in the subsequent operations on GEM objects. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Dave Gordon authored
commit 30b0da8d upstream. We had only DRM_INFO() and DRM_ERROR(), whereas the underlying printk() provides several other useful intermediate levels such as NOTICE and WARNING. So this patch fills out the set by providing both regular and once-only macros for each of the levels INFO, NOTICE, and WARNING, using a common underlying macro that does all the token-pasting. DRM_ERROR is unchanged, as it's not just a printk wrapper. v2: Fix whitespace, missing ## (Eric Engestrom) Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Reviewed-by:
Eric Engestrom <eric.engestrom@imgtec.com> Cc: dri-devel@lists.freedesktop.org Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Daniel Thompson authored
commit c07d3533 upstream. kallsyms_symbol_next() returns a boolean (true on success). Currently kdb_read() tests the return value with an inequality that unconditionally evaluates to true. This is fixed in the obvious way and, since the conditional branch is supposed to be unreachable, we also add a WARN_ON(). Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Heiko Carstens authored
commit e779498d upstream. When wiring up the socket system calls the compat entries were incorrectly set. Not all of them point to the corresponding compat wrapper functions, which clear the upper 33 bits of user space pointers, like it is required. Fixes: 977108f8 ("s390: wire up separate socketcalls system calls") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Robin Murphy authored
commit 29a90b70 upstream. The intel-iommu DMA ops fail to correctly handle scatterlists where sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed appropriately based on the page-aligned portion of the offset, but the mapping is set up relative to sg->page, which means it fails to actually cover the whole buffer (and in the worst case doesn't cover it at all): (sg->dma_address + sg->dma_len) ----+ sg->dma_address ---------+ | iov_pfn------+ | | | | | v v v iova: a b c d e f |--------|--------|--------|--------|--------| <...calculated....> [_____mapped______] pfn: 0 1 2 3 4 5 |--------|--------|--------|--------|--------| ^ ^ ^ | | | sg->page ----+ | | sg->offset --------------+ | (sg->offset + sg->length) ----------+ As a result, the caller ends up overrunning the mapping into whatever lies beyond, which usually goes badly: [ 429.645492] DMAR: DRHD: handling fault status reg 2 [ 429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ... Whilst this is a fairly rare occurrence, it can happen from the result of intermediate scatterlist processing such as scatterwalk_ffwd() in the crypto layer. Whilst that particular site could be fixed up, it still seems worthwhile to bring intel-iommu in line with other DMA API implementations in handling this robustly. To that end, fix the intel_map_sg() path to line up the mapping correctly (in units of MM pages rather than VT-d pages to match the aligned_nrpages() calculation) regardless of the offset, and use sg_phys() consistently for clarity. Reported-by:
Harsh Jain <Harsh@chelsio.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed by: Ashok Raj <ashok.raj@intel.com> Tested by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Jaejoong Kim authored
commit 89b89d12 upstream. snd_usb_copy_string_desc() returns zero if usb_string() fails. In case of failure, we need to check the snd_usb_copy_string_desc()'s return value and add an exception case Signed-off-by:
Jaejoong Kim <climbbb.kim@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jaejoong Kim authored
commit 251552a2 upstream. The snd_usb_copy_string_desc() retrieves the usb string corresponding to the index number through the usb_string(). The problem is that the usb_string() returns the length of the string (>= 0) when successful, but it can also return a negative value about the error case or status of usb_control_msg(). If iClockSource is '0' as shown below, usb_string() will returns -EINVAL. This will result in '0' being inserted into buf[-22], and the following KASAN out-of-bound error message will be output. AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 10 (CLOCK_SOURCE) bClockID 1 bmAttributes 0x07 Internal programmable Clock (synced to SOF) bmControls 0x07 Clock Frequency Control (read/write) Clock Validity Control (read-only) bAssocTerminal 0 iClockSource 0 To fix it, check usb_string()'return value and bail out. ================================================================== BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio] Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376 CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3 Hardware name: LG Electronics 15N540-RFLGL/White Tip Mountain, BIOS 15N5 Call Trace: dump_stack+0x63/0x8d print_address_description+0x70/0x290 ? parse_audio_unit+0x1327/0x1960 [snd_usb_audio] kasan_report+0x265/0x350 __asan_store1+0x4a/0x50 parse_audio_unit+0x1327/0x1960 [snd_usb_audio] ? save_stack+0xb5/0xd0 ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 ? kasan_kmalloc+0xad/0xe0 ? kmem_cache_alloc_trace+0xff/0x230 ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? usb_probe_interface+0x1f5/0x440 ? driver_probe_device+0x3ed/0x660 ? build_feature_ctl+0xb10/0xb10 [snd_usb_audio] ? save_stack_trace+0x1b/0x20 ? init_object+0x69/0xa0 ? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio] snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio] ? build_audio_procunit+0x890/0x890 [snd_usb_audio] ? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio] ? kmem_cache_alloc_trace+0xff/0x230 ? usb_ifnum_to_if+0xbd/0xf0 snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio] ? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio] usb_audio_probe+0x4de/0xf40 [snd_usb_audio] ? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio] ? __pm_runtime_idle+0x90/0x90 ? kernfs_activate+0xa6/0xc0 ? usb_match_one_id_intf+0xdc/0x130 ? __pm_runtime_set_status+0x2d4/0x450 usb_probe_interface+0x1f5/0x440 Signed-off-by:
-
Takashi Iwai authored
commit 43a35428 upstream. The use of snd_BUG_ON() in ALSA sequencer timer may lead to a spurious WARN_ON() when a slave timer is deployed as its backend and a corresponding master timer stops meanwhile. The symptom was triggered by syzkaller spontaneously. Since the NULL timer is valid there, rip off snd_BUG_ON(). Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Robb Glasser authored
commit 362bca57 upstream. When the device descriptor is closed, the `substream->runtime` pointer is freed. But another thread may be in the ioctl handler, case SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which calls snd_pcm_info() which accesses the now freed `substream->runtime`. Note: this fixes CVE-2017-0861 Signed-off-by:
Robb Glasser <rglasser@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit ddec3bde upstream. acpi_os_get_root_pointer() may return a valid address even if acpi_disabled is set, but the host bridge information from the ACPI tables is not going to be used in that case and the Broadcom host bridge initialization should not be skipped then, So make broadcom_postcore_init() check acpi_disabled too to avoid this issue. Fixes: 6361d72b (x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan) Reported-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Linux PCI <linux-pci@vger.kernel.org> Link: https://lkml.kernel.org/r/3186627.pxZj1QbYNg@aspire.rjw.lanSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric Biggers authored
commit 0f30cbea upstream. Adding a specially crafted X.509 certificate whose subjectPublicKey ASN.1 value is zero-length caused x509_extract_key_data() to set the public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING metadata byte. Then, x509_cert_parse() called kmemdup() with that bogus size, triggering the WARN_ON_ONCE() in kmalloc_slab(). This appears to be harmless, but it still must be fixed since WARNs are never supposed to be user-triggerable. Fix it by updating x509_cert_parse() to validate that the value has a BIT STRING metadata byte, and that the byte is 0 which indicates that the number of bits in the bitstring is a multiple of 8. It would be nice to handle the metadata byte in asn1_ber_decoder() instead. But that would be tricky because in the general case a BIT STRING could be implicitly tagged, and/or could legitimately have a length that is not a whole number of bytes. Here was the WARN (cleaned up slightly): WARNING: CPU: 1 PID: 202 at mm/slab_common.c:971 kmalloc_slab+0x5d/0x70 mm/slab_common.c:971 Modules linked in: CPU: 1 PID: 202 Comm: keyctl Tainted: G B 4.14.0-09238-g1d3b78bb #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 task: ffff880033014180 task.stack: ffff8800305c8000 Call Trace: __do_kmalloc mm/slab.c:3706 [inline] __kmalloc_track_caller+0x22/0x2e0 mm/slab.c:3726 kmemdup+0x17/0x40 mm/util.c:118 kmemdup include/linux/string.h:414 [inline] x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106 x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Eric Biggers authored
commit 81a7be2c upstream. asn1_ber_decoder() was ignoring errors from actions associated with the opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT, ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT. In practice, this meant the pkcs7_note_signed_info() action (since that was the only user of those opcodes). Fix it by checking for the error, just like the decoder does for actions associated with the other opcodes. This bug allowed users to leak slab memory by repeatedly trying to add a specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY). In theory, this bug could also be used to bypass module signature verification, by providing a PKCS#7 message that is misparsed such that a signature's ->authattrs do not contain its ->msgdigest. But it doesn't seem practical in normal cases, due to restrictions on the format of the ->authattrs. Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Signed-off-by:
-
Eric Biggers authored
commit e0058f3a upstream. In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed to the action functions before their lengths had been computed, using the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH). This resulted in reading data past the end of the input buffer, when given a specially crafted message. Fix it by rearranging the code so that the indefinite length is resolved before the action is called. This bug was originally found by fuzzing the X.509 parser in userspace using libFuzzer from the LLVM project. KASAN report (cleaned up slightly): BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline] BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366 Read of size 128 at addr ffff880035dd9eaf by task keyctl/195 CPU: 1 PID: 195 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bb #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0xd1/0x175 lib/dump_stack.c:53 print_address_description+0x78/0x260 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x23f/0x350 mm/kasan/report.c:409 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy ./include/linux/string.h:341 [inline] x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366 asn1_ber_decoder+0xb4a/0x1fd0 lib/asn1_decoder.c:447 x509_cert_parse+0x1c7/0x620 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Allocated by task 195: __do_kmalloc_node mm/slab.c:3675 [inline] __kmalloc_node+0x47/0x60 mm/slab.c:3682 kvmalloc ./include/linux/mm.h:540 [inline] SYSC_add_key security/keys/keyctl.c:104 [inline] SyS_add_key+0x19e/0x290 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 42d5ec27 ("X.509: Add an ASN.1 decoder") Reported-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit af97a77b upstream. Thanks to the scripts/leaking_addresses.pl script, it was found that some EFI values should not be readable by non-root users. So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to make this easier, and use it in other places at the same time. Reported-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
-
Huacai Chen authored
commit c2e8fbf9 upstream. The rps_resp buffer in ata_device is a DMA target, but it isn't explicitly cacheline aligned. Due to this, adjacent fields can be overwritten with stale data from memory on non-coherent architectures. As a result, the kernel is sometimes unable to communicate with an SATA device behind a SAS expander. Fix this by ensuring that the rps_resp buffer is cacheline aligned. This issue is similar to that fixed by Commit 84bda12a ("libata: align ap->sector_buf") and Commit 4ee34ea3 ("libata: Align ata_device's id on a cacheline"). Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
William Breathitt Gray authored
commit 5a244727 upstream. The isa_driver structure for an isa_bus device is stored in the device platform_data member of the respective device structure. This platform_data member may be reset to NULL if isa_driver match callback for the device fails, indicating a device unsupported by the ISA driver. This patch fixes a possible NULL pointer dereference if one of the isa_driver callbacks to attempted for an unsupported device. This error should not occur in practice since ISA devices are typically manually configured and loaded by the users, but we may as well prevent this error from popping up for the 0day testers. Fixes: a5117ba7 ("[PATCH] Driver model: add ISA bus") Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by:
-
Paul Meyer authored
commit 297d6b6e upstream. While reading in more than one block (50) of KVP records, the allocation goes per block, but the reads used the total number of allocated records (without resetting the pointer/stream). This causes the records buffer to overrun when the refresh reads more than one block over the previous capacity (e.g. reading more than 100 KVP records whereas the in-memory database was empty before). Fix this by reading the correct number of KVP records from file each time. Signed-off-by:
Paul Meyer <Paul.Meyer@microsoft.com> Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
weiping zhang authored
commit e60ea67b upstream. index can be reused by other virtio device. Signed-off-by:
weiping zhang <zhangweiping@didichuxing.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Martin Kelly authored
commit 12147edc upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
Martin Kelly <mkelly@xevo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Martin Kelly authored
commit 7a31ced3 upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
-
Martin Kelly authored
commit bd352e1a upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
-
Martin Kelly authored
commit 6aa8d594 upstream. In mcba_usb, we have observed that when you unplug the device, the driver will endlessly resubmit failing URBs, which can cause CPU stalls. This issue is fixed in mcba_usb by catching the codes seen on device disconnect (-EPIPE and -EPROTO). This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it in the same way. Signed-off-by:
-
Jimmy Assarsson authored
commit 8bd13bd5 upstream. Avoid flooding the kernel log with "Formate error", if incomplete message are received. Signed-off-by:
Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by:
-
Jimmy Assarsson authored
commit e84f44eb upstream. The conditon in the while-loop becomes true when actual_length is less than 2 (MSG_HEADER_LEN). In best case we end up with a former, already dispatched msg, that got msg->len greater than actual_length. This will result in a "Format error" error printout. Problem seen when unplugging a Kvaser USB device connected to a vbox guest. warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by:
-
Jimmy Assarsson authored
commit 435019b4 upstream. The allocated buffer was not freed if usb_submit_urb() failed. Signed-off-by:
-
Oliver Stäbler authored
commit f6c23b17 upstream. After commit d75b1ade ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. So we need to return budget if there are still packets to receive. Signed-off-by:
Oliver Stäbler <oliver.staebler@bytesatwork.ch> Signed-off-by:
-
- 09 Dec, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
