- 14 Mar, 2016 40 commits
-
-
Alexandre Belloni authored
rv3029c2 is actually rv3029. c2 denotes an option. Signed-off-by:Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Akinobu Mita authored
There are only a few differences between PCF2127 and PCF2129 (PCF2127 has 512 bytes of general purpose SRAM and count-down timer). The rtc-pcf2127 driver currently doesn't use the PCF2127 specific functionality and Kconfig help text already says this driver supports PCF2127/29, so we can simply add pcf2129 to device id list. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Akinobu Mita authored
pcf2127 has selectable I2C-bus and SPI-bus interface support. This adds support for SPI interface. Signed-off-by:
-
Akinobu Mita authored
pcf2127 has selectable I2C-bus and SPI-bus interface support. Currently rtc-pcf2127 driver only supports I2C. This is preparation for support for SPI interface. Signed-off-by:
-
Michael Büsch authored
This adds support to - enable/disable the thermometer - set the temperature scanning interval - read the current temperature that is used for temp compensation. via hwmon interface Signed-off-by:
Michael Buesch <m@bues.ch> Signed-off-by:
-
Michael Büsch authored
This simplifies the update of single bits in the eeprom. Signed-off-by:
-
Josh Poimboeuf authored
objtool reports the following warnings: drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: duplicate frame pointer save drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x3: duplicate frame pointer setup drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: frame pointer state mismatch The warning message needs to be improved, but what it really means in this case is that ds1685_rtc_poweroff() has a possible code path where it can actually fall through to the next function in the object code, ds1685_rtc_work_queue(). The bug is caused by the use of the unreachable() macro in a place which is actually reachable. That causes gcc to assume that the printk() immediately before the unreachable() macro never returns, when in fact it does. So gcc places the printk() at the very end of the function's object code. When the printk() returns, the next function starts executing. The surrounding comment and printk message state that the code should spin forever, which explains the unreachable() statement. However the actual spin code is missing. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Alexander Kochetkov authored
Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver") Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
-
Akinobu Mita authored
ds3232->mutex is used to protect for alarm operations which need to access status and control registers. But we can use rtc->ops_lock instead. rtc->ops_lock is held when most of rtc_class_ops methods are called, so we only need to explicitly acquire it from irq handler in order to protect form concurrent accesses. Signed-off-by:
-
Akinobu Mita authored
ds3232-core requests irq with IRQF_SHARED, so irq can be shared by several devices. But the irq handler for ds3232 unconditionally disables the irq at first and the irq is re-enabled only when the interrupt source was the ds3232's alarm. This behaviour breaks the devices sharing the same irq in the various scenarios. This converts to use threaded irq and remove outdated code in suspend/resume paths. Signed-off-by:
-
Akinobu Mita authored
UIE mode irqs are handled by the generic rtc core now. But there are remaining unused code fragments for it. Signed-off-by:
-
Akinobu Mita authored
Add missing register access error checks and make it return error code or print error message. Signed-off-by:
-
Akinobu Mita authored
The rtctest (tools/testing/selftests/timers/rtctest.c) found that reading ds3232 rtc device immediately return the value 0x20 (RTC_AF) without waiting alarm interrupt. This is because alarm_irq_enable() of ds3232 driver changes RTC_AF flag in rtc->irq_data. So calling ioctl with RTC_AIE_ON generates invalid value in rtc device. The lower-level driver should not touch rtc->irq_data directly. Signed-off-by:
-
Akinobu Mita authored
According to "Feature Comparison of the DS323x Real-Time Clocks" (http://pdfserv.maximintegrated.com/en/an/AN5143.pdf), DS3232 and DS3234 are very similar. This merges rtc-ds3232 and rtc-ds3234 with using regmap. This change also enables to support alarm for ds3234. Signed-off-by:
-
Akinobu Mita authored
This is preparation for merging rtc-ds3232 i2c driver and rtc-ds3234 spi driver. Signed-off-by:
-
Alexandre Belloni authored
The pxa section is indented using spaces, use tabs. Signed-off-by: -
Michael Büsch authored
The trickle charger resistor can be enabled via device tree property trickle-resistor-ohms. Signed-off-by:
-
Michael Büsch authored
This adds functions for access to the EEPROM memory on the rv3029. Signed-off-by:
-
Michael Büsch authored
This simplifies mask/set operations on device I2C registers. Signed-off-by:
-
Michael Büsch authored
This adds all (according to the data sheet) missing register and bit definitions. It also fixes the definition of the trickle charger bit masks. Signed-off-by:
-
Michael Büsch authored
The C2 suffix does not appear in the latest datasheet, so add a device ID without it. Signed-off-by:
-
Michael Büsch authored
The C2 suffix does not appear anymore in the latest device and data sheet versions. Signed-off-by:
-
Alexandre Belloni authored
There are several arch-specific RTC drivers that can be successfully compiled on other platforms. Add a COMPILE_TEST dependency for those. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
Arnd Bergmann authored
There are four architectures using this driver, but since we can build it with COMPILE_TEST, we should try dealing with the absence of the asm/rtc.h header file, to avoid getting a build error: drivers/rtc/rtc-generic.c:12:21: fatal error: asm/rtc.h: No such file or directory This creates an alternative use of the driver, allowing architectures to pass a set of rtc_class_ops in platform data. We can convert the four architectures to use this and then remove the original code. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Alexandre Belloni authored
The time and date register of the pcf8223 are undefined after a power reset. Properly handle the OS bit and return -EINVAL when that bit is set. It is properly removed when setting the time. This solves an issue where the time and date may be valid for rtc_valid_tm() but is not the current time. Signed-off-by: -
Alexandre Belloni authored
No members of struct pcf85063 are used anymore, remove the whole structure. Reviewed-by:
Juergen Borleis <jbe@pengutronix.de> Signed-off-by:
-
Alexandre Belloni authored
Since the driver is mainlined there is no use for a separate version number. Signed-off-by: -
Alexandre Belloni authored
Always show there is an I2C section, like the other sections. Signed-off-by: -
Dan Carpenter authored
We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Laxman Dewangan authored
Use macro REGMAP_IRQ_REG from regmap.h to initialise the regmap irq table for max77686 to have better coding style and improve readability. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Laxman Dewangan authored
Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by:
-
Javier Martinez Canillas authored
The driver uses the MODULE_ALIAS() macro to export a platform module alias to allow the module to be autoloaded if the device is registered using the legacy platform registration mechanism but the driver is always used by OF only machines so the alias is not needed and should just be removed. Suggested-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Alexandre Belloni authored
pcf85063_get_datetime() tries to handle a century bit but that bit is not documented and the final value is never used anywhere else in the kernel. Reviewed-by:
Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by:
-
Geert Uytterhoeven authored
drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c15 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by:
-
Alexandre Belloni authored
The Kconfig option for rv3029 is not mentioning any part number, explicitly show rv3029. Signed-off-by: -
Grygorii Strashko authored
as3722 RTC IRQ is nested threaded and wired to the as3722 inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
tps80031 RTC IRQ is nested threaded and wired to the tps80031 inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Signed-off-by:
-
Grygorii Strashko authored
tps65910 RTC IRQ is nested threaded and wired to the tps65910 inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Grygorii Strashko authored
tps6586x RTC IRQ is nested threaded and wired to the tps6586x inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Grygorii Strashko authored
Palams RTC IRQ is nested threaded and wired to the Palmas inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Signed-off-by:
-
