- 13 Sep, 2016 9 commits
-
-
Arnd Bergmann authored
Merge tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "DTS related changes for omaps for v4.9 merge window" from Tony Lindgren: - Update elm phandle for am335x - Fix overo NAND gpmc ranges, this has always been broken so it can wait for the merge window - Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too as it's been using the older configration since the dts got added - A series of dtc warning fixes for unit names - Keep dcdc3, 5 and 6 enabled during suspend on am347x boards - Disable DDR regulator during rtc-only/poweroff mode for am437x boards - Remove redundant regulator compatibles for am437x boards - Increas QSPI max frequency for dra7 boards - Enable QSPI for am57xx-idk-common - Enable am335x-wega audio support - Workaround for i845 for dra7 - Update binding for logicpd boards - Add gpio-decoder nodes for am335x-icev2 board - Add linux,pci-domain property for dra7 - Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree entries, these can wait for merge window as Ethernet works on dra7 - A series of changes to drop skeleton.dtsi because of dtc warnings * tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (54 commits) ARM: dts: dra7: Add missing unit name to memory nodes ARM: dts: dra62x: Add missing unit name to memory nodes ARM: dts: dm8168: Add missing unit name to memory nodes ARM: dts: dm8148: Add missing unit name to memory nodes ARM: dts: am572x: Add missing unit name to memory nodes ARM: dts: am4372: Add missing unit name to memory nodes ARM: dts: am3517: Add missing unit name to memory nodes ARM: dts: am335x: Add missing unit name to memory nodes ARM: dts: omap5: Add missing unit name to memory nodes ARM: dts: omap4: Add missing unit name to memory nodes ARM: dts: omap3: Add missing unit name to memory nodes ARM: dts: omap2: Add missing unit name to memory nodes ARM: dts: am4372: Remove skeleton.dtsi usage ARM: dts: dra7: Remove skeleton.dtsi usage ARM: dts: dm816x: Remove skeleton.dtsi usage ARM: dts: dm814x: Remove skeleton.dtsi usage ARM: dts: am33xx: Remove skeleton.dtsi usage ARM: dts: omap5: Remove skeleton.dtsi usage ARM: dts: omap4: Remove skeleton.dtsi usage ARM: dts: omap3: Remove skeleton.dtsi usage ...
-
Arnd Bergmann authored
Merge tag 'keystone_dts_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Merge "ARM: dts: Keystone DTS for 4.9" from Santosh Shilimkar Add K2G nodes for GPIO, IRQ and Message Manager * tag 'keystone_dts_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g: Add Message Manager node ARM: dts: keystone-k2g: Add DSP GPIO controller node ARM: dts: keystone-k2g: Add keystone IRQ controller node ARM: dts: keystone-k2g: Add device state controller node ARM: dts: keystone: specify usb mode explicitly
-
Arnd Bergmann authored
Merge tag 'uniphier-dt-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt Merge "UniPhier ARM SoC DT updates for v4.9" from Masahiro Yamada: * Match DT names other projects and documents * Switch over to PSCI * Use clock/reset drivers * Misc * tag 'uniphier-dt-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add specific compatible to SoC-Glue node ARM: dts: uniphier: use clock/reset controllers ARM: dts: uniphier: switch over to PSCI ARM: dts: uniphier: match DT names to other projects and documents ARM: dts: uniphier: remove a whitespace after tabs
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Merge "Samsung DeviceTree update for v4.9" from Krzysztof Kozlowski: 1. Set chosen serial bitrate which allows proper serial output when bootloader does pass all the data in command line. 2. Cleanup. * tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio' ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4
-
https://github.com/manabian/linux-lpcArnd Bergmann authored
Merge "Device Tree additions for LPC18xx platform" from Joachim Eastwood: Small fix for the compatible string for the NXP SE97 I2C chip on the Hitex Eval board from Guenter and a couple of additional DT properties for the DWMAC that is need for correct operation. * tag 'lpc18xx_dts_for_4.9' of https://github.com/manabian/linux-lpc: ARM: dts: lpc18xx: configure dwmac properly ARM: dts: lpc4350-hitex-eval: fix binding for SE97 i2c device
-
Lars Persson authored
The irq affinity is required for pmu interrupts. Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Lars Persson authored
Use the cache settings that were determined to give best performance on artpec-6 typical workloads. Signed-off-by:
-
Lars Persson authored
Use defines from the clock binding header as clock indexes. Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-dt-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Renesas ARM Based SoC DT Updates for v4.9" from Simon Horman: * Add DU, VIN, I2C, SDHI, EtherAVB, GPIO support to r8a7792 * Enable CAN0 on r8a7792/blanche * Enable sound on r8a7794/silk * Correct SDHI register size on r8a7794 * tag 'renesas-dt-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits) ARM: dts: r8a7792: add DU support ARM: dts: r8a7792: add DU clocks ARM: dts: r8a7792: fix misindented line ARM: dts: silk: add sound support ARM: dts: r8a7794: add sound support ARM: dts: r8a7794: add Audio-DMAC support ARM: dts: r8a7794: add MSTP10 clocks ARM: dts: r8a7794: add MSTP5 clocks ARM: dts: r8a7794: add audio clocks ARM: dts: r8a7792: add VIN support ARM: dts: r8a7792: add VIN clocks ARM: dts: r8a7792: add I2C support ARM: dts: r8a7792: add I2C clocks ARM: dts: r8a7792: add SDHI support ARM: dts: r8a7792: add SD clocks ARM: dts: r8a7794: Correct SDHI register size ARM: dts: blanche: add CAN0 support ARM: dts: r8a7792: add CAN support ARM: dts: r8a7792: add CAN clocks ARM: dts: r8a7792: add EtherAVB support ...
-
- 31 Aug, 2016 30 commits
-
-
Nishanth Menon authored
Introduce the message manager node for the A15 queues on which Linux runs. The Message Manager is primarily used for communication with Power Management controller on K2G. Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Santosh Shilimkar <ssantosh@kernel.org>
-
Andrew F. Davis authored
Add the DSP GPIO controller node on K2G SoC. This is used to send interrupts to the only DSP processor subsystem present on the SoC. The IP is identical to that of the equivalent nodes on existing K2 SoCs. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
-
Andrew F. Davis authored
Add the Keystone IRQ controller IP node on K2G SoC. This allows the ARM CorePac core to receive interrupts from remote processor devices (eg: DSP) on the SoC. The IP is identical in functionality to that of the equivalent nodes on existing K2 SoCs. The only difference is the ARM INTC interrupt id/event number. Signed-off-by:
-
Andrew F. Davis authored
Add the device state controller node as a syscon node to the K2G SoC. This module provides similar device control functionality as that on the existing K2 SoCs. One example usage would be the boot address programming of the DSP processor sub-system. Signed-off-by:
-
Grygorii Strashko authored
The USB OTG mode is not supported by Kestone 2 devices, as result, the USB devices enumeration and detection will not work properly when kernel is built with CONFIG_USB_DWC3_DUAL_ROLE=y (default for multi platform build): - it's required to load gadget drivers manually to make host mode work and this confuses current Keystone 2 users - device mode is not working, because port can't detect and switch to peripheral/host mode dynamically. Hence, specify usb mode explicitly in DT: usb0 = "host" for all KS2 devices and usb1 = "peripheral" for K2E. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by:
-
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it shouldn't have functional changes. Since no am4372 based board had a memory node defined, a dummy node is added so the compiled DTB memory node is the same than before. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" But these boards don't have a memory node defined, so removing the skeleton.dtsi inclusion from omap3.dtsi will cause a change in the compiled DTB. Add a dummy memory node so the compiled DTB doesn't change if the skeleton.dtsi is removed from omap3.dtsi. Eventually the correct starting addresses and sizes should be used but I didn't find that information. Signed-off-by: -
Javier Martinez Canillas authored
The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" But the sl50 board doesn't have a, so removing the skeleton.dtsi inclusion from am33xx.dtsi will cause a change in the compiled DTB. The board has 512 MiB of RAM and its starting address is 0x80000000, so add a proper memory device node in the DTS. Signed-off-by: -
Grygorii Strashko authored
Current clocks tree definition for CPSW/CPTS doesn't correspond TRM for dra7/am57 SoCs. CPTS: has to be sourced from gmac_rft_clk_mux clock CPSW: DPLL_GMAC -> CLKOUT_M2 -> GMAC_250M_CLK -> 1/2 -> -> GMAC_MAIN_CLK (125 MHZ) Hence, correct clock tree for GMAC_MAIN_CLK and use proper clock for CPTS. This also require updating of CPTS clock multiplier. Signed-off-by:Mugunthan V N <mugunthanvnm@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
J.D. Schroeder authored
This commit fixes the clock data inside the DRA7xx clocks device tree structure for the gmac_gmii_ref_clk_div clock. This clock is actually the GMAC_MAIN_CLK and has nothing to do with the register at address 0x4a0093d0. If CLKSEL_REF bit 24 inside of CM_GMAC_GMAC_CLKCTRL, is set to 1 in order to use the GMAC_RMII_CLK instead of the GMAC_RMII_HS_CLK, the kernel generates a clock divider warning: WARNING: CPU: 0 PID: 0 at drivers/clk/clk-divider.c:129 clk_divider_recalc_rate+0xa8/0xe0() gmac_gmii_ref_clk_div: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set By properly configuring the gmac_gmii_ref_clk_div (GMAC_MAIN_CLK) to have the parent of dpll_gmac_m2_ck always divided by 2 the warning is resolved and the clock tree is fixed up. Additionally, a new clock called rmii_50mhz_clk_mux is defined that does utilize CM_GMAC_GMAC_CLKCTRL[24] CLKSEL_REF to configure the source clock for the RMII_50MHZ_CLK. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:J.D. Schroeder <jay.schroeder@garmin.com> Reviewed-by:
Trenton Andres <trenton.andres@garmin.com> Signed-off-by:
-
- 30 Aug, 2016 1 commit
-
-
Masahiro Yamada authored
This is a simple MFD, but add a specific compatible just in case. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
