- 21 May, 2018 6 commits
-
-
Shilpasri G Bhat authored
The firmware has supported for reading sensor values of size u32. This patch adds support to use newer firmware functions which allows to read the sensors of size u64. Signed-off-by:
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Shilpasri G Bhat authored
This patch adds support to read 64-bit sensor values. This method is used to read energy sensors and counters which are of type u64. Signed-off-by:
-
Michael Neuling authored
Paste on POWER9 only works on accelerators and no longer on real memory. Hence this test is broken so remove it. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Peter Rosin authored
The sanctioned compatible is "nxp,pca9547". Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Michael Neuling authored
In commit e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") we fixed setting the DAWR end point to its max value via PPC_PTRACE_SETHWDEBUG. Unfortunately we broke PTRACE_SET_DEBUGREG when setting a 512 byte aligned breakpoint. PTRACE_SET_DEBUGREG currently sets the length of the breakpoint to zero (memset() in hw_breakpoint_init()). This worked with arch_validate_hwbkpt_settings() before the above patch was applied but is now broken if the breakpoint is 512byte aligned. This sets the length of the breakpoint to 8 bytes when using PTRACE_SET_DEBUGREG. Fixes: e2a800be ("powerpc/hw_brk: Fix off by one error when validating DAWR region end") Cc: stable@vger.kernel.org # v3.11+ Signed-off-by:
-
Michael Neuling authored
Back when we first introduced the DAWR, in commit 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges"), we screwed up the constraint making it a 1024 byte boundary rather than a 512. This makes the check overly permissive. Fortunately GDB is the only real user and it always did they right thing, so we never noticed. This fixes the constraint to 512 bytes. Fixes: 4ae7ebe9 ("powerpc: Change hardware breakpoint to allow longer ranges") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
-
- 18 May, 2018 6 commits
-
-
Michael Ellerman authored
This allows us to squash some sparse warnings and also avoids having to do explicity endian conversions in the code. Signed-off-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com>
-
Michael Ellerman authored
This allows us to squash some sparse warnings and also avoids having to do explicity endian conversions in the code. Signed-off-by:
-
Michael Ellerman authored
Add byte-swapping versions of __raw_writeq() and __raw_rm_writeq(). This allows us to avoid sparse warnings caused by passing __be64 to __raw_writeq(), which takes unsigned long: arch/powerpc/platforms/powernv/pci-ioda.c:1981:38: warning: incorrect type in argument 1 (different base types) expected unsigned long [unsigned] v got restricted __be64 [usertype] <noident> It's also generally preferable to use a byte-swapping accessor rather than doing it by hand in the code, which is more bug prone. Signed-off-by: -
Anju T Sudhakar authored
Currently memory is allocated for core-imc based on cpu_present_mask, which has bit 'cpu' set iff cpu is populated. We use (cpu number / threads per core) as the array index to access the memory. Under some circumstances firmware marks a CPU as GUARDed CPU and boot the system, until cleared of errors, these CPU's are unavailable for all subsequent boots. GUARDed CPUs are possible but not present from linux view, so it blows a hole when we assume the max length of our allocation is driven by our max present cpus, where as one of the cpus might be online and be beyond the max present cpus, due to the hole. So (cpu number / threads per core) value bounds the array index and leads to memory overflow. Call trace observed during a guard test: Faulting instruction address: 0xc000000000149f1c cpu 0x69: Vector: 380 (Data Access Out of Range) at [c000003fea303420] pc:c000000000149f1c: prefetch_freepointer+0x14/0x30 lr:c00000000014e0f8: __kmalloc+0x1a8/0x1ac sp:c000003fea3036a0 msr:9000000000009033 dar:c9c54b2c91dbf6b7 current = 0xc000003fea2c0000 paca = 0xc00000000fddd880 softe: 3 irq_happened: 0x01 pid = 1, comm = swapper/104 Linux version 4.16.7-openpower1 (smc@smc-desktop) (gcc version 6.4.0 (Buildroot 2018.02.1-00006-ga8d1126)) #2 SMP Fri May 4 16:44:54 PDT 2018 enter ? for help call trace: __kmalloc+0x1a8/0x1ac (unreliable) init_imc_pmu+0x7f4/0xbf0 opal_imc_counters_probe+0x3fc/0x43c platform_drv_probe+0x48/0x80 driver_probe_device+0x22c/0x308 __driver_attach+0xa0/0xd8 bus_for_each_dev+0x88/0xb4 driver_attach+0x2c/0x40 bus_add_driver+0x1e8/0x228 driver_register+0xd0/0x114 __platform_driver_register+0x50/0x64 opal_imc_driver_init+0x24/0x38 do_one_initcall+0x150/0x15c kernel_init_freeable+0x250/0x254 kernel_init+0x1c/0x150 ret_from_kernel_thread+0x5c/0xc8 Allocating memory for core-imc based on cpu_possible_mask, which has bit 'cpu' set iff cpu is populatable, will fix this issue. Reported-by:Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by:
Balbir Singh <bsingharora@gmail.com> Tested-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in battery_charging array. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Finn Thain authored
My powerpc-linux-gnu-gcc v4.4.5 compiler can't build a 32-bit kernel any more: arch/powerpc/lib/sstep.c: In function 'do_popcnt': arch/powerpc/lib/sstep.c:1068: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1069: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1070: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c:1079: error: integer constant is too large for 'long' type arch/powerpc/lib/sstep.c: In function 'do_prty': arch/powerpc/lib/sstep.c:1117: error: integer constant is too large for 'long' type This file gets compiled with -std=gnu89 which means a constant can be given the type 'long' even if it won't fit. Fix the errors with a 'ULL' suffix on the relevant constants. Fixes: 2c979c48 ("powerpc/lib/sstep: Add prty instruction emulation") Fixes: dcbd19b4 ("powerpc/lib/sstep: Add popcnt instruction emulation") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
- 17 May, 2018 5 commits
-
-
Nicholas Piggin authored
A kernel crash in process context that calls emergency_restart from panic will end up calling opal_event_shutdown with interrupts disabled but not in interrupt. This causes a sleeping function to be called which gives the following warning with sysrq+c: Rebooting in 10 seconds.. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 in_atomic(): 0, irqs_disabled(): 1, pid: 7669, name: bash CPU: 20 PID: 7669 Comm: bash Tainted: G D W 4.17.0-rc5+ #3 Call Trace: dump_stack+0xb0/0xf4 (unreliable) ___might_sleep+0x174/0x1a0 mutex_lock+0x38/0xb0 __free_irq+0x68/0x460 free_irq+0x70/0xc0 opal_event_shutdown+0xb4/0xf0 opal_shutdown+0x24/0xa0 pnv_shutdown+0x28/0x40 machine_shutdown+0x44/0x60 machine_restart+0x28/0x80 emergency_restart+0x30/0x50 panic+0x2a0/0x328 oops_end+0x1ec/0x1f0 bad_page_fault+0xe8/0x154 handle_page_fault+0x34/0x38 --- interrupt: 300 at sysrq_handle_crash+0x44/0x60 LR = __handle_sysrq+0xfc/0x260 flag_spec.62335+0x12b844/0x1e8db4 (unreliable) __handle_sysrq+0xfc/0x260 write_sysrq_trigger+0xa8/0xb0 proc_reg_write+0xac/0x110 __vfs_write+0x6c/0x240 vfs_write+0xd0/0x240 ksys_write+0x6c/0x110 Fixes: 9f0fd049 ("powerpc/powernv: Add a virtual irqchip for opal events") Signed-off-by:Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Christophe Leroy authored
arch/powerpc/Makefile activates -mmultiple on BE PPC32 configs in order to use multiple word instructions in functions entry/exit. The patch does the same for the asm parts, for consistency. On processors like the 8xx on which insn fetching is pretty slow, this speeds up registers save/restore. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> [mpe: PPC32 is BE only, so drop the endian checks] Signed-off-by:
-
Christophe Leroy authored
Doing the test at exit of the function avoids an unnecessary test and branch inside longjmp(). Semantics are unchanged. Signed-off-by:
-
Christophe Leroy authored
This reverts commit 6ad966d7. That commit was pointless, because csum_add() sums two 32 bits values, so the sum is 0x1fffffffe at the maximum. And then when adding upper part (1) and lower part (0xfffffffe), the result is 0xffffffff which doesn't carry. Any lower value will not carry either. And behind the fact that this commit is useless, it also kills the whole purpose of having an arch specific inline csum_add() because the resulting code gets even worse than what is obtained with the generic implementation of csum_add() 0000000000000240 <.csum_add>: 240: 38 00 ff ff li r0,-1 244: 7c 84 1a 14 add r4,r4,r3 248: 78 00 00 20 clrldi r0,r0,32 24c: 78 89 00 22 rldicl r9,r4,32,32 250: 7c 80 00 38 and r0,r4,r0 254: 7c 09 02 14 add r0,r9,r0 258: 78 09 00 22 rldicl r9,r0,32,32 25c: 7c 00 4a 14 add r0,r0,r9 260: 78 03 00 20 clrldi r3,r0,32 264: 4e 80 00 20 blr In comparison, the generic implementation of csum_add() gives: 0000000000000290 <.csum_add>: 290: 7c 63 22 14 add r3,r3,r4 294: 7f 83 20 40 cmplw cr7,r3,r4 298: 7c 10 10 26 mfocrf r0,1 29c: 54 00 ef fe rlwinm r0,r0,29,31,31 2a0: 7c 60 1a 14 add r3,r0,r3 2a4: 78 63 00 20 clrldi r3,r3,32 2a8: 4e 80 00 20 blr And the reverted implementation for PPC64 gives: 0000000000000240 <.csum_add>: 240: 7c 84 1a 14 add r4,r4,r3 244: 78 80 00 22 rldicl r0,r4,32,32 248: 7c 80 22 14 add r4,r0,r4 24c: 78 83 00 20 clrldi r3,r4,32 250: 4e 80 00 20 blr Fixes: 6ad966d7 ("powerpc/64: Fix checksum folding in csum_add()") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Christophe Leroy authored
PMD_PAGE_SIZE() is nowhere used and _PMD_SIZE is only used by PMD_PAGE_SIZE(). This patch removes them. Signed-off-by:
-
- 15 May, 2018 14 commits
-
-
Jonathan Neuschäfer authored
The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/miniSigned-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Jonathan Neuschäfer authored
On the Wii, there is a secondary IRQ controller (hlwd-pic), so flipper-pic's match operation should not be hardcoded to return 1. In fact, the default matching logic is sufficient, and we can completely omit flipper_pic_match. Signed-off-by:
-
Aneesh Kumar K.V authored
Testing with a threaded version of mmap_bench which allocate 1G chunks and with large number of threads we find: without patch 32.72% mmap_bench [kernel.vmlinux] [k] do_raw_spin_lock | ---do_raw_spin_lock | --32.68%--0 | |--15.82%--pte_fragment_alloc | | | --15.79%--do_huge_pmd_anonymous_page | __handle_mm_fault | handle_mm_fault | __do_page_fault | handle_page_fault | test_mmap | test_mmap | start_thread | __clone | |--14.95%--do_huge_pmd_anonymous_page | __handle_mm_fault | handle_mm_fault | __do_page_fault | handle_page_fault | test_mmap | test_mmap | start_thread | __clone | with patch 12.89% mmap_bench [kernel.vmlinux] [k] do_raw_spin_lock | ---do_raw_spin_lock | --12.83%--0 | |--3.21%--pagevec_lru_move_fn | __lru_cache_add | | | --2.74%--do_huge_pmd_anonymous_page | __handle_mm_fault | handle_mm_fault | __do_page_fault | handle_page_fault | test_mmap | test_mmap | start_thread | __clone | |--3.11%--do_huge_pmd_anonymous_page | __handle_mm_fault | handle_mm_fault | __do_page_fault | handle_page_fault | test_mmap | test_mmap | start_thread | __clone ..... | --0.55%--pte_fragment_alloc | --0.55%--do_huge_pmd_anonymous_page __handle_mm_fault handle_mm_fault __do_page_fault handle_page_fault test_mmap test_mmap start_thread __clone Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
Instead of encoding shift in the table address, use an enumerated index value. This allow us to do different things in the callback for pte and pmd. Signed-off-by:
-
Aneesh Kumar K.V authored
4K config use one full page at level 4 of the pagetable. Add support for single fragment allocation in pagetable fragment code and and use that for 4K config. This makes both 4k and 64k use the same code path. Later we will switch pmd to use the page table fragment code. This is done only for 64bit platforms which is using page table fragment support. Signed-off-by:
-
Aneesh Kumar K.V authored
Now that we have removed 64K page size support, the RCU page table free can be much simpler for nohash. Make a copy of the the rcu callback to pgalloc.h header similar to nohash 32. We could possibly merge 32 and 64 bit there. But that is for a later patch We also move the book3s specific handler to pgtable_book3s64.c. This will be updated in a later patch to handle split pmd ptlock. Signed-off-by:
-
Aneesh Kumar K.V authored
We have in Kconfig config PPC_64K_PAGES bool "64k page size" depends on !PPC_FSL_BOOK3E && (44x || PPC_BOOK3S_64 || PPC_BOOK3E_64) select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64 Only supported BOOK3E 64 bit platforms is FSL_BOOK3E. Remove the dead 64k page support code from 64bit nohash. Signed-off-by:
-
Aneesh Kumar K.V authored
We rename the alloc and get_from_cache to indicate they operate on pte fragments. In later patch we will add pmd fragment support. No functional change in this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
In later patch we switch pmd_lock from mm->page_table_lock to split pmd ptlock. It avoid compilations issues, use pmd_lockptr helper. Signed-off-by:
-
Aneesh Kumar K.V authored
Only code movement and avoid #ifdef. Signed-off-by:
-
Michael Ellerman authored
This brings in one commit that we may want to share with the kvm-ppc tree, to avoid merge conflicts and get wider testing.
-
Aneesh Kumar K.V authored
In the next set of patches, we will switch pmd allocator to use page fragments and the locking will be updated to split pmd ptlock. We want to avoid using fragments for partition-scoped table. Use slab cache similar to level 4 table Signed-off-by:
-
- 14 May, 2018 5 commits
-
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. See commit 1c8f4220 ("mm: change return type to vm_fault_t"). We are fixing a minor bug, that the error from vm_insert_pfn() was being ignored and the effect of this is likely to be only felt in OOM situations. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in debug messages of a structure field name Signed-off-by:
-
Nicholas Piggin authored
The exec_target binary could segfault calling _exit(2) because r13 is not set up properly (and libc looks at that when performing a syscall). Call SYS_exit using syscall(2) which doesn't seem to have this problem. Signed-off-by:
-
Alexey Kardashevskiy authored
At the moment we assume that IODA2 and newer PHBs can always do 4K/64K/16M IOMMU pages, however this is not the case for POWER9 and now skiboot advertises the supported sizes via the device so we use that instead of hard coding the mask. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Michael Ellerman authored
Currently memtrace doesn't build if NUMA=n: In function ‘memtrace_alloc_node’: arch/powerpc/platforms/powernv/memtrace.c:134:6: error: the address of ‘contig_page_data’ will always evaluate as ‘true’ if (!NODE_DATA(nid) || !node_spanned_pages(nid)) ^ This is because for NUMA=n NODE_DATA(nid) points to an always allocated structure, contig_page_data. But even in the NUMA=y case memtrace_alloc_node() is only called for online nodes, and we should always have a NODE_DATA() allocated for an online node. So remove the (hopefully) overly paranoid check, which also means we can build when NUMA=n. Signed-off-by:
-
- 11 May, 2018 4 commits
-
-
Michael Ellerman authored
In commit e6a6928c ("of/fdt: Convert FDT functions to use libfdt") (Apr 2014), the generic flat device tree code dropped support for flat device tree's older than version 0x10 (16). We still have code in our CPU scanning to cope with flat device tree versions earlier than 2, which can now never trigger, so drop it. Signed-off-by:
-
Michael Ellerman authored
Add a test of the relative branch patching logic in the alternate section feature fixup code. This tests that if we branch past the last instruction of the alternate section, the branch is not patched. That's because the assembler will have created a branch that already points to the first instruction after the patched section, which is correct and needs no further patching. Signed-off-by: -
Michael Ellerman authored
We want this to remain the last test (because it's disabled by default), so give it a non-numbered name so we don't have to renumber it when adding new tests before it. Signed-off-by: -
Michael Ellerman authored
The code patching code has always been a bit confused about whether it's best to use void *, unsigned int *, char *, etc. to point to instructions. In fact in the feature fixups tests we use both unsigned int[] and u8[] in different places. Unfortunately the tests that use unsigned int[] calculate the size of the code blocks using subtraction of those unsigned int pointers, and then pass the result to memcmp(). This means we're only comparing 1/4 of the bytes we need to, because we need to multiply by sizeof(unsigned int) to get the number of *bytes*. The result is that the tests do all the patching and then only compare some of the resulting code, so patching bugs that only effect that last 3/4 of the code could slip through undetected. It turns out that hasn't been happening, although one test had a bad expected case (see previous commit). Fix it for now by multiplying the size by 4 in the affected functions. Fixes: 362e7701 ("powerpc: Add self-tests of the feature fixup code") Epic-brown-paper-bag-by:
-
