Pull fanotify updates from Jan Kara:
 "Support for new FAN_RENAME fanotify event and support for reporting
  child info in directory fanotify events (FAN_REPORT_TARGET_FID)"

* tag 'fsnotify_for_v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: wire up FAN_RENAME event
  fanotify: report old and/or new parent+name in FAN_RENAME event
  fanotify: record either old name new name or both for FAN_RENAME
  fanotify: record old and new parent and name in FAN_RENAME event
  fanotify: support secondary dir fh and name in fanotify_info
  fanotify: use helpers to parcel fanotify_info buffer
  fanotify: use macros to get the offset to fanotify_info buffer
  fsnotify: generate FS_RENAME event with rich information
  fanotify: introduce group flag FAN_REPORT_TARGET_FID
  fsnotify: separate mark iterator type from object type enum
  fsnotify: clarify object type argument

Pull iomap updates from Matthew Wilcox:
 "Convert xfs/iomap to use folios.

  This should be all that is needed for XFS to use large folios. There
  is no code in this pull request to create large folios, but no
  additional changes should be needed to XFS or iomap once they are
  created.

  Usually this would have come from Darrick, and we had intended that it
  would come that route. Between the holidays and various things which
  Darrick needed to work on, he asked if I could send things directly.

  There weren't any other iomap patches pending for this release, which
  probably also played a role"

* tag 'iomap-5.17' of git://git.infradead.org/users/willy/linux: (26 commits)
  iomap: Inline __iomap_zero_iter into its caller
  xfs: Support large folios
  iomap: Support large folios in invalidatepage
  iomap: Convert iomap_migrate_page() to use folios
  iomap: Convert iomap_add_to_ioend() to take a folio
  iomap: Simplify iomap_do_writepage()
  iomap: Simplify iomap_writepage_map()
  iomap,xfs: Convert ->discard_page to ->discard_folio
  iomap: Convert iomap_write_end_inline to take a folio
  iomap: Convert iomap_write_begin() and iomap_write_end() to folios
  iomap: Convert __iomap_zero_iter to use a folio
  iomap: Allow iomap_write_begin() to be called with the full length
  iomap: Convert iomap_page_mkwrite to use a folio
  iomap: Convert readahead and readpage to use a folio
  iomap: Convert iomap_read_inline_data to take a folio
  iomap: Use folio offsets instead of page offsets
  iomap: Convert bio completions to use folios
  iomap: Pass the iomap_page into iomap_set_range_uptodate
  iomap: Add iomap_invalidate_folio
  iomap: Convert iomap_releasepage to use a folio
  ...

Pull folio conversion updates from Matthew Wilcox:
 "Convert much of the page cache to use folios

  This stops just short of actually enabling large folios. It converts
  everything that I noticed needs to be converted, but there may still
  be places I've overlooked which still have page size assumptions.

  The big change here is using large entries in the page cache XArray
  instead of many small entries. That only affects shmem for now, but
  it's a pretty big change for shmem since it changes where memory needs
  to be allocated (at split time instead of insertion)"

* tag 'folio-5.17' of git://git.infradead.org/users/willy/pagecache: (49 commits)
  mm: Use multi-index entries in the page cache
  XArray: Add xas_advance()
  truncate,shmem: Handle truncates that split large folios
  truncate: Convert invalidate_inode_pages2_range to folios
  fs: Convert vfs_dedupe_file_range_compare to folios
  mm: Remove pagevec_remove_exceptionals()
  mm: Convert find_lock_entries() to use a folio_batch
  filemap: Return only folios from find_get_entries()
  filemap: Convert filemap_get_read_batch() to use a folio_batch
  filemap: Convert filemap_read() to use a folio
  truncate: Add invalidate_complete_folio2()
  truncate: Convert invalidate_inode_pages2_range() to use a folio
  truncate: Skip known-truncated indices
  truncate,shmem: Add truncate_inode_folio()
  shmem: Convert part of shmem_undo_range() to use a folio
  mm: Add unmap_mapping_folio()
  truncate: Add truncate_cleanup_folio()
  filemap: Add filemap_release_folio()
  filemap: Use a folio in filemap_page_mkwrite
  filemap: Use a folio in filemap_map_pages
  ...

Pull SPDX/License update from Greg KH:
 "Here is a single change that fixes up the description of the 'LGPL-2.1
  or later' identifiers so that the tools properly acknowledge that this
  is a valid license.

  This change has been in linux-next for weeks with no reported problems"

* tag 'spdx-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers

Pull USB and Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for
  5.17-rc1.

  Nothing major in here, just lots of little updates and cleanups. These
  include:

   - some USB header fixes picked from Ingo's header-splitup work

   - more USB4/Thunderbolt hardware support added

   - USB gadget driver updates and additions

   - USB typec additions (includes some acpi changes, which were acked
     by the ACPI maintainer)

   - core USB fixes as found by syzbot that were too late for 5.16-final

   - USB dwc3 driver updates

   - USB dwc2 driver updates

   - platform_get_irq() conversions of some USB drivers

   - other minor USB driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (111 commits)
  docs: ABI: fixed formatting in configfs-usb-gadget-uac2
  usb: gadget: u_audio: Subdevice 0 for capture ctls
  usb: gadget: u_audio: fix calculations for small bInterval
  usb: dwc2: gadget: initialize max_speed from params
  usb: dwc2: do not gate off the hardware if it does not support clock gating
  usb: dwc3: qcom: Fix NULL vs IS_ERR checking in dwc3_qcom_probe
  headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
  USB: common: debug: add needed kernel.h include
  headers/prep: Fix non-standard header section: drivers/usb/host/ohci-tmio.c
  headers/prep: Fix non-standard header section: drivers/usb/cdns3/core.h
  headers/prep: usb: gadget: Fix namespace collision
  USB: core: Fix bug in resuming hub's handling of wakeup requests
  USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_status
  usb: dwc3: dwc3-qcom: Add missing platform_device_put() in dwc3_qcom_acpi_register_core
  usb: gadget: clear related members when goto fail
  usb: gadget: don't release an existing dev->buf
  usb: dwc2: Simplify a bitmap declaration
  usb: Remove usb_for_each_port()
  usb: typec: port-mapper: Convert to the component framework
  usb: Link the ports to the connectors they are attached to
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 5.17-rc1.

  Nothing major in here, just lots of good updates and fixes, including:

   - more tty core cleanups from Jiri as well as mxser driver cleanups.
     This is the majority of the core diffstat

   - tty documentation updates from Jiri

   - platform_get_irq() updates

   - various serial driver updates for new features and hardware

   - fifo usage for 8250 console, reducing cpu load a lot

   - LED fix for keyboards, long-time bugfix that went through many
     revisions

   - minor cleanups

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  serial: core: Keep mctrl register state and cached copy in sync
  serial: stm32: correct loop for dma error handling
  serial: stm32: fix flow control transfer in DMA mode
  serial: stm32: rework TX DMA state condition
  serial: stm32: move tx dma terminate DMA to shutdown
  serial: pl011: Drop redundant DTR/RTS preservation on close/open
  serial: pl011: Drop CR register reset on set_termios
  serial: pl010: Drop CR register reset on set_termios
  serial: liteuart: fix MODULE_ALIAS
  serial: 8250_bcm7271: Fix return error code in case of dma_alloc_coherent() failure
  Revert "serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2"
  tty: goldfish: Use platform_get_irq() to get the interrupt
  serdev: BREAK/FRAME/PARITY/OVERRUN notification prototype V2
  tty: serial: meson: Drop the legacy compatible strings and clock code
  serial: pmac_zilog: Use platform_get_irq() to get the interrupt
  serial: bcm63xx: Use platform_get_irq() to get the interrupt
  serial: ar933x: Use platform_get_irq() to get the interrupt
  serial: vt8500: Use platform_get_irq() to get the interrupt
  serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt
  serial: pxa: Use platform_get_irq() to get the interrupt
  ...

Pull staging driver updates from Greg KH:
 "Here's the big set of staging driver updates for 5.17-rc1

  Nothing major in here at all, just lots and lots of tiny cleanups.
  Overall more code was removed than added, which is always nice, but
  not a huge change.

  Majority of the work happened in the r8188eu driver, that had hundreds
  of cleanups happen on it, but almost all other staging drivers had
  cleanups as well. No new functionality was added, cleanups only.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (308 commits)
  staging: r8188eu: rename camelcase variable uintPeerChannel
  staging: r8188eu: make BW20_24G_Diff a 1-D array
  staging: r8188eu: make OFDM_24G_Diff a 1-D array
  staging: r8188eu: BW40_24G_Diff is set but not used
  staging: r8188eu: CCK_24G_Diff is set but not used
  staging: r8188eu: make Index24G_BW40_Base a 1-D array
  staging: r8188eu: make Index24G_CCK_Base a 1-D array
  staging: r8188eu: rfPath is always 0
  staging: r8188eu: remove unneeded parameter from rtl8188e_SetHalODMVar
  staging: pi433: add comment to rx_lock mutex definition
  staging: pi433: fix frequency deviation check
  staging: vc04_services: rename BM2835 to BCM2835 in headers comments
  staging: vc04_services: rename string literal containing bm2835_* to bcm2835*_
  staging: vc04_services: rename variables containing bm2835_* to bcm2835_*
  staging: vc04_services: rename functions containing bm2835_* to bcm2835_*
  staging: vc04_services: rename structures bm2835_mmal_dev and bm2835_mmal_v4l2_ctrl
  staging: greybus: audio: Check null pointer
  staging: r8188eu: add spaces around P2P_AP_P2P_CH_SWITCH_PROCESS_WK
  staging: r8188eu: turbo scan is always off for r8188eu
  staging: r8188eu: cmd_issued_cnt is set but not used
  ...

Merge tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of changes for the driver core for 5.17-rc1.

  Lots of little things here, including:

   - kobj_type cleanups

   - auxiliary_bus documentation updates

   - auxiliary_device conversions for some drivers (relevant subsystems
     all have provided acks for these)

   - kernfs lock contention reduction for some workloads

   - other tiny cleanups and changes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
  kobject documentation: remove default_attrs information
  drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
  debugfs: lockdown: Allow reading debugfs files that are not world readable
  driver core: Make bus notifiers in right order in really_probe()
  driver core: Move driver_sysfs_remove() after driver_sysfs_add()
  firmware: edd: remove empty default_attrs array
  firmware: dmi-sysfs: use default_groups in kobj_type
  qemu_fw_cfg: use default_groups in kobj_type
  firmware: memmap: use default_groups in kobj_type
  sh: sq: use default_groups in kobj_type
  headers/uninline: Uninline single-use function: kobject_has_children()
  devtmpfs: mount with noexec and nosuid
  driver core: Simplify async probe test code by using ktime_ms_delta()
  nilfs2: use default_groups in kobj_type
  kobject: remove kset from struct kset_uevent_ops callbacks
  driver core: make kobj_type constant.
  driver core: platform: document registration-failure requirement
  vdpa/mlx5: Use auxiliary_device driver data helpers
  net/mlx5e: Use auxiliary_device driver data helpers
  soundwire: intel: Use auxiliary_device driver data helpers
  ...

Pull pin control bulk updates from Linus Walleij:
 "Core changes:

   - New standard enumerator and corresponding device tree bindings for
     output impedance pin configuration. (Implemented and used in the
     Renesas rzg2l driver.)

   - Cleanup of Kconfig and Makefile to be somewhat orderly and
     alphabetic.

  New drivers:

   - Samsung Exynos 7885 pin controller.

   - Ocelot LAN966x pin controller.

   - Qualcomm SDX65 pin controller.

   - Qualcomm SM8450 pin controller.

   - Qualcomm PM8019, PM8226 and PM2250 pin controllers.

   - NXP/Freescale i.MXRT1050 pin controller.

   - Intel Thunder Bay pin controller.

  Enhancements:

   - Introduction of the string library helper function
     "kasprintf_strarray()" and subsequent use in Rockchip, ST and
     Armada pin control drivers, as well as the GPIO mockup driver.

   - The Ocelot pin controller has been extensively rewritten to use
     regmap and other modern kernel infrastructure.

   - The Microchip SGPIO driver has been converted to use regmap.

   - The SPEAr driver had been converted to use regmap.

   - Substantial cleanups and janitorial on the Apple pin control driver
     that was merged for v5.16.

   - Janitorial to remove of_node assignments in the GPIO portions that
     anyway get this handled in the GPIO core.

   - Minor cleanups and improvements in several pin controllers"

* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
  pinctrl: imx: fix assigning groups names
  dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
  pinctrl: bcm: ns: use generic groups & functions helpers
  pinctrl: imx: fix allocation result check
  pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
  pinctrl: Propagate firmware node from a parent device
  dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
  pinctrl: add one more "const" for generic function groups
  pinctrl: keembay: rework loops looking for groups names
  pinctrl: keembay: comment process of building functions a bit
  pinctrl: imx: prepare for making "group_names" in "function_desc" const
  ARM: dts: gpio-ranges property is now required
  pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
  pinctrl: Get rid of duplicate of_node assignment in the drivers
  pinctrl-sunxi: don't call pinctrl_gpio_direction()
  pinctrl-bcm2835: don't call pinctrl_gpio_direction()
  pinctrl: bcm2835: Silence uninit warning
  pinctrl: Sort Kconfig and Makefile entries alphabetically
  pinctrl: Add Intel Thunder Bay pinctrl driver
  dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
  ...

Pull media fixes from Mauro Carvalho Chehab:

 - some fixes at si2157 tuning logic

 - a warning fix on atomisp when used with clang

* tag 'media/v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: si2157: add support for DVB-C Annex C
  media: si2157: fix bandwidth stored in dev
  media: si2157: fix 6MHz & 6.1MHz bandwidth setting
  media: atomisp: Do not define input_system_cfg2400_t twice

Merge tag 'for-5.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fixes and improvements to dm btree and dm space map code in
   persistent-data library used by thinp and cache.

 - Update DM integrity to use struct_group() to zero struct
   journal_sector.

 - Update DM sysfs to use default_groups in kobj_type.

* tag 'for-5.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm sysfs: use default_groups in kobj_type
  dm integrity: Use struct_group() to zero struct journal_sector
  dm space map common: add bounds check to sm_ll_lookup_bitmap()
  dm btree: add a defensive bounds check to insert_at()
  dm btree remove: change a bunch of BUG_ON() calls to proper errors
  dm btree spine: eliminate duplicate le32_to_cpu() in node_check()
  dm btree spine: remove extra node_check function declaration

Pull block driver updates from Jens Axboe:

 - mtip32xx pci cleanups (Bjorn)

 - mtip32xx conversion to generic power management (Vaibhav)

 - rsxx pci powermanagement cleanups (Bjorn)

 - Remove the rsxx driver. This hardware never saw much adoption, and
   it's been end of lifed for a while. (Christoph)

 - MD pull request from Song:
      - REQ_NOWAIT support (Vishal Verma)
      - raid6 benchmark optimization (Dirk Müller)
      - Fix for acct bioset (Xiao Ni)
      - Clean up max_queued_requests (Mariusz Tkaczyk)
      - PREEMPT_RT optimization (Davidlohr Bueso)
      - Use default_groups in kobj_type (Greg Kroah-Hartman)

 - Use attribute groups in pktcdvd and rnbd (Greg)

 - NVMe pull request from Christoph:
      - increment request genctr on completion (Keith Busch, Geliang
        Tang)
      - add a 'iopolicy' module parameter (Hannes Reinecke)
      - print out valid arguments when reading from /dev/nvme-fabrics
        (Hannes Reinecke)

 - Use struct_group() in drbd (Kees)

 - null_blk fixes (Ming)

 - Get rid of congestion logic in pktcdvd (Neil)

 - Floppy ejection hang fix (Tasos)

 - Floppy max user request size fix (Xiongwei)

 - Loop locking fix (Tetsuo)

* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
  md: use default_groups in kobj_type
  md: Move alloc/free acct bioset in to personality
  lib/raid6: Use strict priority ranking for pq gen() benchmarking
  lib/raid6: skip benchmark of non-chosen xor_syndrome functions
  md: fix spelling of "its"
  md: raid456 add nowait support
  md: raid10 add nowait support
  md: raid1 add nowait support
  md: add support for REQ_NOWAIT
  md: drop queue limitation for RAID1 and RAID10
  md/raid5: play nice with PREEMPT_RT
  block/rnbd-clt-sysfs: use default_groups in kobj_type
  pktcdvd: convert to use attribute groups
  block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
  nvme: add 'iopolicy' module parameter
  nvme: drop unused variable ctrl in nvme_setup_cmd
  nvme: increment request genctr on completion
  nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
  block: remove the rsxx driver
  rsxx: Drop PCI legacy power management
  ...

Pull block updates from Jens Axboe:

 - Unify where the struct request handling code is located in the blk-mq
   code (Christoph)

 - Header cleanups (Christoph)

 - Clean up the io_context handling code (Christoph, me)

 - Get rid of ->rq_disk in struct request (Christoph)

 - Error handling fix for add_disk() (Christoph)

 - request allocation cleanusp (Christoph)

 - Documentation updates (Eric, Matthew)

 - Remove trivial crypto unregister helper (Eric)

 - Reduce shared tag overhead (John)

 - Reduce poll_stats memory overhead (me)

 - Known indirect function call for dio (me)

 - Use atomic references for struct request (me)

 - Support request list issue for block and NVMe (me)

 - Improve queue dispatch pinning (Ming)

 - Improve the direct list issue code (Keith)

 - BFQ improvements (Jan)

 - Direct completion helper and use it in mmc block (Sebastian)

 - Use raw spinlock for the blktrace code (Wander)

 - fsync error handling fix (Ye)

 - Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me)

* tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits)
  MAINTAINERS: add entries for block layer documentation
  docs: block: remove queue-sysfs.rst
  docs: sysfs-block: document virt_boundary_mask
  docs: sysfs-block: document stable_writes
  docs: sysfs-block: fill in missing documentation from queue-sysfs.rst
  docs: sysfs-block: add contact for nomerges
  docs: sysfs-block: sort alphabetically
  docs: sysfs-block: move to stable directory
  block: don't protect submit_bio_checks by q_usage_counter
  block: fix old-style declaration
  nvme-pci: fix queue_rqs list splitting
  block: introduce rq_list_move
  block: introduce rq_list_for_each_safe macro
  block: move rq_list macros to blk-mq.h
  block: drop needless assignment in set_task_ioprio()
  block: remove unnecessary trailing '\'
  bio.h: fix kernel-doc warnings
  block: check minor range in device_add_disk()
  block: use "unsigned long" for blk_validate_block_size().
  block: fix error unwinding in device_add_disk
  ...

Pull io_uring updates from Jens Axboe:

 - Support for prioritized work completions (Hao)

 - Simplification of reissue (Pavel)

 - Add support for CQE skip (Pavel)

 - Memory leak fix going to 5.15-stable (Pavel)

 - Re-write of internal poll. This both cleans up that code, and gets us
   ready to fix the POLLFREE issue (Pavel)

 - Various cleanups (GuoYong, Pavel, Hao)

* tag 'for-5.17/io_uring-2022-01-11' of git://git.kernel.dk/linux-block: (31 commits)
  io_uring: fix not released cached task refs
  io_uring: remove redundant tab space
  io_uring: remove unused function parameter
  io_uring: use completion batching for poll rem/upd
  io_uring: single shot poll removal optimisation
  io_uring: poll rework
  io_uring: kill poll linking optimisation
  io_uring: move common poll bits
  io_uring: refactor poll update
  io_uring: remove double poll on poll update
  io_uring: code clean for some ctx usage
  io_uring: batch completion in prior_task_list
  io_uring: split io_req_complete_post() and add a helper
  io_uring: add helper for task work execution code
  io_uring: add a priority tw list for irq completion work
  io-wq: add helper to merge two wq_lists
  io_uring: reuse io_req_task_complete for timeouts
  io_uring: tweak iopoll CQE_SKIP event counting
  io_uring: simplify selected buf handling
  io_uring: move up io_put_kbuf() and io_put_rw_kbuf()
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - refactor the dma-direct coherent allocator

 - turn an macro into an inline in scatterlist.h (Logan Gunthorpe)

* tag 'dma-mapping-5.17' of git://git.infradead.org/users/hch/dma-mapping:
  lib/scatterlist: cleanup macros into static inline functions
  dma-direct: add a dma_direct_use_pool helper
  dma-direct: factor the swiotlb code out of __dma_direct_alloc_pages
  dma-direct: drop two CONFIG_DMA_RESTRICTED_POOL conditionals
  dma-direct: warn if there is no pool for force unencrypted allocations
  dma-direct: fail allocations that can't be made coherent
  dma-direct: refactor the !coherent checks in dma_direct_alloc
  dma-direct: factor out a helper for DMA_ATTR_NO_KERNEL_MAPPING allocations
  dma-direct: clean up the remapping checks in dma_direct_alloc
  dma-direct: always leak memory that can't be re-encrypted
  dma-direct: don't call dma_set_decrypted for remapped allocations
  dma-direct: factor out dma_set_{de,en}crypted helpers

Pull locking updates from Borislav Petkov:
 "Lots of cleanups and preparation. Highlights:

   - futex: Cleanup and remove runtime futex_cmpxchg detection

   - rtmutex: Some fixes for the PREEMPT_RT locking infrastructure

   - kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
     annotate the racy owner->on_cpu access *once*.

   - atomic64: Dead-Code-Elemination"

[ Description above by Peter Zijlstra ]

* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: atomic64: Remove unusable atomic ops
  futex: Fix additional regressions
  locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
  x86/mm: Include spinlock_t definition in pgtable.
  locking: Mark racy reads of owner->on_cpu
  locking: Make owner_on_cpu() into <linux/sched.h>
  lockdep/selftests: Adapt ww-tests for PREEMPT_RT
  lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
  lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
  lockdep/selftests: Avoid using local_lock_{acquire|release}().
  lockdep: Remove softirq accounting on PREEMPT_RT.
  locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
  locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
  locking: Remove rt_rwlock_is_contended().
  sched: Trigger warning if ->migration_disabled counter underflows.
  futex: Fix sparc32/m68k/nds32 build regression
  futex: Remove futex_cmpxchg detection
  futex: Ensure futex_atomic_cmpxchg_inatomic() is present
  kernel/locking: Use a pointer in ww_mutex_trylock().

Pull scheduler updates from Borislav Petkov:
 "Mostly minor things this time; some highlights:

   - core-sched: Add 'Forced Idle' accounting; this allows to track how
     much CPU time is 'lost' due to core scheduling constraints.

   - psi: Fix for MEM_FULL; a task running reclaim would be counted as a
     runnable task and prevent MEM_FULL from being reported.

   - cpuacct: Long standing fixes for some cgroup accounting issues.

   - rt: Bandwidth timer could, under unusual circumstances, be failed
     to armed, leading to indefinite throttling."

[ Description above by Peter Zijlstra ]

* tag 'sched_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Replace CFS internal cpu_util() with cpu_util_cfs()
  sched/fair: Cleanup task_util and capacity type
  sched/rt: Try to restart rt period timer when rt runtime exceeded
  sched/fair: Document the slow path and fast path in select_task_rq_fair
  sched/fair: Fix per-CPU kthread and wakee stacking for asym CPU capacity
  sched/fair: Fix detection of per-CPU kthreads waking a task
  sched/cpuacct: Make user/system times in cpuacct.stat more precise
  sched/cpuacct: Fix user/system in shown cpuacct.usage*
  cpuacct: Convert BUG_ON() to WARN_ON_ONCE()
  cputime, cpuacct: Include guest time in user time in cpuacct.stat
  psi: Fix PSI_MEM_FULL state when tasks are in memstall and doing reclaim
  sched/core: Forced idle accounting
  psi: Add a missing SPDX license header
  psi: Remove repeated verbose comment

Merge tag 'Wcast-function-type-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull cast-function-type warning addition from Gustavo A. R. Silva:
 "This globally enables -Wcast-function-type.

  We need to make sure new function cast mismatches are not introduced
  in the kernel in order to avoid tripping CFI checking"

* tag 'Wcast-function-type-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  Makefile: Enable -Wcast-function-type

Pull ARM updates from Russell King:

 - amba bus irq rework

 - add kfence support

 - support for Cortex M33 and M55 CPUs

 - kbuild updates for decompressor

 - let core code manage thread_info::cpu

 - avoid unpredictable NOP encoding in decompressor

 - reduce information printed in calltraces

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: reduce the information printed in call traces
  ARM: 9168/1: Add support for Cortex-M55 processor
  ARM: 9167/1: Add support for Cortex-M33 processor
  ARM: 9166/1: Support KFENCE for ARM
  ARM: 9165/1: mm: Provide is_write_fault()
  ARM: 9164/1: mm: Provide set_memory_valid()
  ARM: 9163/1: amba: Move of_amba_device_decode_irq() into amba_probe()
  ARM: 9162/1: amba: Kill sysfs attribute file of irq
  ARM: 9161/1: mm: mark private VM_FAULT_X defines as vm_fault_t
  ARM: 9159/1: decompressor: Avoid UNPREDICTABLE NOP encoding
  ARM: 9158/1: leave it to core code to manage thread_info::cpu
  ARM: 9154/1: decompressor: do not copy source files while building

Pull parisc architecture updates from Helge Deller:

 - Fix lpa and lpa_user defines (John David Anglin)

 - Fix symbol lookup of init functions with an __is_kernel() fix (Helge
   Deller)

 - Fix wrong pdc_toc_pim_11 and pdc_toc_pim_20 definitions (Helge
   Deller)

 - Add lws_atomic_xchg and lws_atomic_store syscalls (John David Anglin)

 - Rewrite light-weight syscall and futex code (John David Anglin)

 - Enable TOC (transfer of contents) feature unconditionally (Helge
   Deller)

 - Improve fault handler messages (John David Anglin)

 - Improve build process (Masahiro Yamada)

 - Reduce kernel code footprint of user access functions (Helge Deller)

 - Fix build error due to outX() macros (Bart Van Assche)

 - Ue default_groups in kobj_type in pdc_stable (Greg Kroah-Hartman)

 - Default to 16 CPUs on 32-bit kernel (Helge Deller)

* tag 'for-5.17/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Default to 16 CPUs on 32-bit kernel
  sections: Fix __is_kernel() to include init ranges
  parisc: Re-use toc_stack as hpmc_stack
  parisc: Enable TOC (transfer of contents) feature unconditionally
  parisc: io: Improve the outb(), outw() and outl() macros
  parisc: pdc_stable: use default_groups in kobj_type
  parisc: Add kgdb io_module to read chars via PDC
  parisc: Fix pdc_toc_pim_11 and pdc_toc_pim_20 definitions
  parisc: Add lws_atomic_xchg and lws_atomic_store syscalls
  parisc: Rewrite light-weight syscall and futex code
  parisc: Enhance page fault termination message
  parisc: Don't call faulthandler_disabled() in do_page_fault()
  parisc: Switch user access functions to signal errors in r29 instead of r8
  parisc: Avoid calling faulthandler_disabled() twice
  parisc: Fix lpa and lpa_user defines
  parisc: Define depi_safe macro
  parisc: decompressor: do not copy source files while building

Pull missed x86 build updates from Borislav Petkov:
 "In the heat of the battle between me and the tip pull requests, I've
  sent you the tip:x86/build branch without the two top-most commits
  from Ingo (it appears I hadn't fast-forwarded my local branch, sorry
  about that).

  Therefore, here's a part 2 of x86/build for 5.17.

   - Make x86 defconfigs more useful by enabling
     CONFIG_LOCALVERSION_AUTO and CONFIG_KALLSYMS_ALL

  And while you merge that, I'll be at the blackboard, writing:

    I will always fast-forward local branches before tagging and sending pull requests to Linus.
    I will always fast-forward local branches before tagging and sending pull requests to Linus.
    I will always fast-forward local branches before tagging and sending pull requests..."

* tag 'x86_build_for_v5.17_rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kbuild: Enable CONFIG_KALLSYMS_ALL=y in the defconfigs
  x86/defconfig: Enable CONFIG_LOCALVERSION_AUTO=y in the defconfig

Pull EFI updates from Ard Biesheuvel:

 - support taking the measurement of the initrd when loaded via the
   LoadFile2 protocol

 - kobject API cleanup from Greg

 - some header file whitespace fixes

* tag 'efi-next-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: use default_groups in kobj_type
  efi/libstub: measure loaded initrd info into the TPM
  efi/libstub: consolidate initrd handling across architectures
  efi/libstub: x86/mixed: increase supported argument count
  efi/libstub: add prototype of efi_tcg2_protocol::hash_log_extend_event()
  include/linux/efi.h: Remove unneeded whitespaces before tabs

Pull UML updates from Richard Weinberger:

 - set_fs removal

 - Devicetree support

 - Many cleanups from Al

 - Various virtio and build related fixes

* tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (31 commits)
  um: virtio_uml: Allow probing from devicetree
  um: Add devicetree support
  um: Extract load file helper from initrd.c
  um: remove set_fs
  hostfs: Fix writeback of dirty pages
  um: Use swap() to make code cleaner
  um: header debriding - sigio.h
  um: header debriding - os.h
  um: header debriding - net_*.h
  um: header debriding - mem_user.h
  um: header debriding - activate_ipi()
  um: common-offsets.h debriding...
  um, x86: bury crypto_tfm_ctx_offset
  um: unexport handle_page_fault()
  um: remove a dangling extern of syscall_trace()
  um: kill unused cpu()
  uml/i386: missing include in barrier.h
  um: stop polluting the namespace with registers.h contents
  logic_io instance of iounmap() needs volatile on argument
  um: move amd64 variant of mmap(2) to arch/x86/um/syscalls_64.c
  ...

Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
 "JFFS2:
   - Fix for a deadlock in jffs2_write_begin()

  UBI:
   - Fixes in comments

  UBIFS:
   - Expose error counters in sysfs
   - Many bugfixes found by Hulk Robot and others"

* tag 'for-linus-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  jffs2: GC deadlock reading a page that is used in jffs2_write_begin()
  ubifs: read-only if LEB may always be taken in ubifs_garbage_collect
  ubifs: fix double return leb in ubifs_garbage_collect
  ubifs: fix slab-out-of-bounds in ubifs_change_lp
  ubifs: fix snprintf() length check
  ubifs: Document sysfs nodes
  ubifs: Export filesystem error counters
  ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffers
  ubifs: Make use of the helper macro kthread_run()
  ubi: Fix a mistake in comment
  ubifs: Fix spelling mistakes

Pull dlm updates from David Teigland:
 "This set includes the normal collection of minor fixes and cleanups,
  new kmem caches for network messaging structs, a start on some basic
  tracepoints, and some new debugfs files for inserting test messages"

* tag 'dlm-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (32 commits)
  fs: dlm: print cluster addr if non-cluster node connects
  fs: dlm: memory cache for lowcomms hotpath
  fs: dlm: memory cache for writequeue_entry
  fs: dlm: memory cache for midcomms hotpath
  fs: dlm: remove wq_alloc mutex
  fs: dlm: use event based wait for pending remove
  fs: dlm: check for pending users filling buffers
  fs: dlm: use list_empty() to check last iteration
  fs: dlm: fix build with CONFIG_IPV6 disabled
  fs: dlm: replace use of socket sk_callback_lock with sock_lock
  fs: dlm: don't call kernel_getpeername() in error_report()
  fs: dlm: fix potential buffer overflow
  fs: dlm:Remove unneeded semicolon
  fs: dlm: remove double list_first_entry call
  fs: dlm: filter user dlm messages for kernel locks
  fs: dlm: add lkb waiters debugfs functionality
  fs: dlm: add lkb debugfs functionality
  fs: dlm: allow create lkb with specific id range
  fs: dlm: add debugfs rawmsg send functionality
  fs: dlm: let handle callback data as void
  ...

Pull gfs2 updates from Andreas Gruenbacher:
 "Various minor gfs2 cleanups and fixes"

* tag 'gfs2-v5.16-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: dump inode object for iopen glocks
  gfs2: Fix gfs2_instantiate description
  gfs2: Remove redundant check for GLF_INSTANTIATE_NEEDED
  gfs2: remove redundant set of INSTANTIATE_NEEDED
  gfs2: Fix __gfs2_holder_init function name in kernel-doc comment

Pull ext4 updates from Ted Ts'o:
 "Convert ext4 to use the new mount API, and add support for the
  FS_IOC_GETFSLABEL and FS_IOC_SETFSLABEL ioctls.

  In addition the usual large number of clean ups and bug fixes, in
  particular for the fast_commit feature"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (48 commits)
  ext4: don't use the orphan list when migrating an inode
  ext4: use BUG_ON instead of if condition followed by BUG
  ext4: fix a copy and paste typo
  ext4: set csum seed in tmp inode while migrating to extents
  ext4: remove unnecessary 'offset' assignment
  ext4: remove redundant o_start statement
  ext4: drop an always true check
  ext4: remove unused assignments
  ext4: remove redundant statement
  ext4: remove useless resetting io_end_size in mpage_process_page()
  ext4: allow to change s_last_trim_minblks via sysfs
  ext4: change s_last_trim_minblks type to unsigned long
  ext4: implement support for get/set fs label
  ext4: only set EXT4_MOUNT_QUOTA when journalled quota file is specified
  ext4: don't use kfree() on rcu protected pointer sbi->s_qf_names
  ext4: avoid trim error on fs with small groups
  ext4: fix an use-after-free issue about data=journal writeback mode
  ext4: fix null-ptr-deref in '__ext4_journal_ensure_credits'
  ext4: initialize err_blk before calling __ext4_get_inode_loc
  ext4: fix a possible ABBA deadlock due to busy PA
  ...

Pull xfs updates from Darrick Wong:
 "The big new feature here is that the mount code now only bothers to
  try to free stale COW staging extents if the fs unmounted uncleanly.
  This should reduce mount times, particularly on filesystems supporting
  reflink and containing a large number of allocation groups.

  Everything else this cycle are bugfixes, as the iomap folios
  conversion should be plenty enough excitement for anyone. That and I
  ran out of brain bandwidth after Thanksgiving last year.

  Summary:

   - Fix log recovery with da btree buffers when metauuid is in use.

   - Fix type coercion problems in xattr buffer size validation.

   - Fix a bug in online scrub dir leaf bestcount checking.

   - Only run COW recovery when recovering the log.

   - Fix symlink target buffer UAF problems and symlink locking problems
     by not exposing xfs innards to the VFS.

   - Fix incorrect quotaoff lock usage.

   - Don't let transactions cancel cleanly if they have deferred work
     items attached.

   - Fix a UAF when we're deciding if we need to relog an intent item.

   - Reduce kvmalloc overhead for log shadow buffers.

   - Clean up sysfs attr group usage.

   - Fix a bug where scrub's bmap/rmap checking could race with a quota
     file block allocation due to insufficient locking.

   - Teach scrub to complain about invalid project ids"

* tag 'xfs-5.17-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: warn about inodes with project id of -1
  xfs: hold quota inode ILOCK_EXCL until the end of dqalloc
  xfs: Remove redundant assignment of mp
  xfs: reduce kvmalloc overhead for CIL shadow buffers
  xfs: sysfs: use default_groups in kobj_type
  xfs: prevent UAF in xfs_log_item_in_current_chkpt
  xfs: prevent a WARN_ONCE() in xfs_ioc_attr_list()
  xfs: Fix comments mentioning xfs_ialloc
  xfs: check sb_meta_uuid for dabuf buffer recovery
  xfs: fix a bug in the online fsck directory leaf1 bestcount check
  xfs: only run COW extent recovery when there are no live extents
  xfs: don't expose internal symlink metadata buffers to the vfs
  xfs: fix quotaoff mutex usage now that we don't support disabling it
  xfs: shut down filesystem if we xfs_trans_cancel with deferred work items

Pull btrfs updates from David Sterba:
 "This end of the year branch is intentionally not that exciting. Most
  of the changes are under the hood, but there are some minor user
  visible improvements and several performance improvements too.

  Features:

   - make send work with concurrent block group relocation.

     We're not allowed to prevent send failing or silently producing
     some bad stream but with more fine grained locking and checks it's
     possible. The send vs deduplication exclusion could reuse the same
     logic in the future.

   - new exclusive operation 'balance paused' to allow adding a device
     to filesystem with paused balance

   - new sysfs file for fsid stored in the per-device directory to help
     distinguish devices when seeding is enabled, the fsid may differ
     from the one reported by the filesystem

  Performance improvements:

   - less metadata needed for directory logging, directory deletion is
     20-40% faster

   - in zoned mode, cache zone information during mount to speed up
     repeated queries (about 50% speedup)

   - free space tree entries get indexed and searched by size (latency
     -30%, search run time -30%)

   - less contention in tree node locking when inserting a key and no
     splits are needed (files/sec in fsmark improves by 1-20%)

  Fixes:

   - fix ENOSPC failure when attempting direct IO write into NOCOW range

   - fix deadlock between quota enable and other quota operations

   - global reserve minimum calculations fixed to account for free space
     tree

   - in zoned mode, fix condition for chunk allocation that may not find
     the right zone for reuse and could lead to early ENOSPC

  Core:

   - global reserve stealing got simplified and cleaned up in evict

   - remove async transaction commit based on manual transaction refs,
     reuse existing kthread and mechanisms to let it commit transaction
     before timeout

   - preparatory work for extent tree v2, add wrappers for global tree
     roots, truncation path cleanups

   - remove readahead framework, it's a bit overengineered and used only
     for scrub, and yet it does not cover all its needs, there is
     another readahead built in the b-tree search that is now used,
     performance drop on HDD is about 5% which is acceptable and scrub
     is often throttled anyway, on SSDs there's no reported drop but
     slight improvement

   - self tests report extent tree state when error occurs

   - replace assert with debugging information when an uncommitted
     transaction is found at unmount time

  Other:

   - error handling improvements

   - other cleanups and refactoring"

* tag 'for-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
  btrfs: output more debug messages for uncommitted transaction
  btrfs: respect the max size in the header when activating swap file
  btrfs: fix argument list that the kdoc format and script verified
  btrfs: remove unnecessary parameter type from compression_decompress_bio
  btrfs: selftests: dump extent io tree if extent-io-tree test failed
  btrfs: scrub: cleanup the argument list of scrub_stripe()
  btrfs: scrub: cleanup the argument list of scrub_chunk()
  btrfs: remove reada infrastructure
  btrfs: scrub: use btrfs_path::reada for extent tree readahead
  btrfs: scrub: remove the unnecessary path parameter for scrub_raid56_parity()
  btrfs: refactor unlock_up
  btrfs: skip transaction commit after failure to create subvolume
  btrfs: zoned: fix chunk allocation condition for zoned allocator
  btrfs: add extent allocator hook to decide to allocate chunk or not
  btrfs: zoned: unset dedicated block group on allocation failure
  btrfs: zoned: drop redundant check for REQ_OP_ZONE_APPEND and btrfs_is_zoned
  btrfs: zoned: sink zone check into btrfs_repair_one_zone
  btrfs: zoned: simplify btrfs_check_meta_write_pointer
  btrfs: zoned: encapsulate inode locking for zoned relocation
  btrfs: sysfs: add devinfo/fsid to retrieve actual fsid from the device
  ...

Pull erofs updates from Gao Xiang:
 "In this cycle, tail-packing data inline for compressed files is now
  supported so that tail pcluster can be stored and read together with
  inode metadata in order to save data I/O and storage space.

  In addition to that, to prepare for the upcoming subpage, folio and
  fscache features, we also introduce meta buffers to get rid of
  erofs_get_meta_page() since it was too close to the page itself.

  In addition, in order to show supported kernel features and control
  sync decompression strategy, new sysfs nodes are introduced in this
  cycle as well.

  Summary:

   - add sysfs interface and a sysfs node to control sync decompression

   - add tail-packing inline support for compressed files

   - get rid of erofs_get_meta_page()"

* tag 'erofs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: use meta buffers for zmap operations
  erofs: use meta buffers for xattr operations
  erofs: use meta buffers for super operations
  erofs: use meta buffers for inode operations
  erofs: introduce meta buffer operations
  erofs: add on-disk compressed tail-packing inline support
  erofs: support inline data decompression
  erofs: support unaligned data decompression
  erofs: introduce z_erofs_fixup_insize
  erofs: tidy up z_erofs_lz4_decompress
  erofs: clean up erofs_map_blocks tracepoints
  erofs: Replace zero-length array with flexible-array member
  erofs: add sysfs node to control sync decompression strategy
  erofs: add sysfs interface
  erofs: rename lz4_0pading to zero_padding

Currently, yenta_dev_suspend_noirq(), yenta_dev_resume_noirq(), and
yenta_pm_ops are covered by "#ifdef CONFIG_PM", which results in
compiler warnings in kernels built with CONFIG_PM_SLEEP=n and
CONFIG_PM=y:

  drivers/pcmcia/yenta_socket.c:1322:12: warning: ‘yenta_dev_resume_noirq’ defined but not used [-Wunused-function]
   1322 | static int yenta_dev_resume_noirq(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~
  drivers/pcmcia/yenta_socket.c:1303:12: warning: ‘yenta_dev_suspend_noirq’ defined but not used [-Wunused-function]
   1303 | static int yenta_dev_suspend_noirq(struct device *dev)
        |            ^~~~~~~~~~~~~~~~~~~~~~~

This affects kernels built without suspend and hibernation.

Avoid these warnings by using "#ifdef CONFIG_PM_SLEEP".

Fixes: 3daaf2c7 ("pcmcia: Make use of the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS()")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fs idmapping updates from Christian Brauner:
 "This contains the work to enable the idmapping infrastructure to
  support idmapped mounts of filesystems mounted with an idmapping.

  In addition this contains various cleanups that avoid repeated
  open-coding of the same functionality and simplify the code in quite a
  few places.

  We also finish the renaming of the mapping helpers we started a few
  kernel releases back and move them to a dedicated header to not
  continue polluting the fs header needlessly with low-level idmapping
  helpers. With this series the fs header only contains idmapping
  helpers that interact with fs objects.

  Currently we only support idmapped mounts for filesystems mounted
  without an idmapping themselves. This was a conscious decision
  mentioned in multiple places (cf. [1]).

  As explained at length in [3] it is perfectly fine to extend support
  for idmapped mounts to filesystem's mounted with an idmapping should
  the need arise. The need has been there for some time now (cf. [2]).

  Before we can port any filesystem that is mountable with an idmapping
  to support idmapped mounts in the coming cycles, we need to first
  extend the mapping helpers to account for the filesystem's idmapping.
  This again, is explained at length in our documentation at [3] and
  also in the individual commit messages so here's an overview.

  Currently, the low-level mapping helpers implement the remapping
  algorithms described in [3] in a simplified manner as we could rely on
  the fact that all filesystems supporting idmapped mounts are mounted
  without an idmapping.

  In contrast, filesystems mounted with an idmapping are very likely to
  not use an identity mapping and will instead use a non-identity
  mapping. So the translation step from or into the filesystem's
  idmapping in the remapping algorithm cannot be skipped for such
  filesystems.

  Non-idmapped filesystems and filesystems not supporting idmapped
  mounts are unaffected by this change as the remapping algorithms can
  take the same shortcut as before. If the low-level helpers detect that
  they are dealing with an idmapped mount but the underlying filesystem
  is mounted without an idmapping we can rely on the previous shortcut
  and can continue to skip the translation step from or into the
  filesystem's idmapping. And of course, if the low-level helpers detect
  that they are not dealing with an idmapped mount they can simply
  return the relevant id unchanged; no remapping needs to be performed
  at all.

  These checks guarantee that only the minimal amount of work is
  performed. As before, if idmapped mounts aren't used the low-level
  helpers are idempotent and no work is performed at all"

Link: 2ca4dcc4 ("fs/mount_setattr: tighten permission checks") [1]
Link: https://github.com/containers/podman/issues/10374 [2]
Link: Documentations/filesystems/idmappings.rst [3]
Link: a65e58e7 ("fs: document and rename fsid helpers") [4]

* tag 'fs.idmapped.v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: support mapped mounts of mapped filesystems
  fs: add i_user_ns() helper
  fs: port higher-level mapping helpers
  fs: remove unused low-level mapping helpers
  fs: use low-level mapping helpers
  docs: update mapping documentation
  fs: account for filesystem mappings
  fs: tweak fsuidgid_has_mapping()
  fs: move mapping helpers
  fs: add is_idmapped_mnt() helper

Pull integrity subsystem updates from Mimi Zohar:
 "The few changes are all kexec related:

   - The MOK keys are loaded onto the .platform keyring in order to
     verify the kexec kernel image signature.

     However, the MOK keys should only be trusted when secure boot is
     enabled. Before loading the MOK keys onto the .platform keyring,
     make sure the system is booted in secure boot mode.

   - When carrying the IMA measurement list across kexec, limit dumping
     the measurement list to when dynamic debug or CONFIG_DEBUG is
     enabled.

   - kselftest: add kexec_file_load selftest support for PowerNV and
     other cleanup"

* tag 'integrity-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  selftests/kexec: Enable secureboot tests for PowerPC
  ima: silence measurement list hexdump during kexec
  selftests/kexec: update searching for the Kconfig
  selftest/kexec: fix "ignored null byte in input" warning
  integrity: Do not load MOK and MOKx when secure boot be disabled
  ima: Fix undefined arch_ima_get_secureboot() and co

Pull audit updates from Paul Moore:
 "Four audit patches for v5.17:

   - Harden the code through additional use of the struct_size() macro
     and zero-length arrays to flexible-array conversions.

   - Ensure that processes which generate userspace audit records are
     not exempt from the kernel's audit throttling when the audit queues
     are being overrun"

* tag 'audit-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: replace zero-length array with flexible-array member
  audit: use struct_size() helper in audit_[send|make]_reply()
  audit: ensure userspace is penalized the same as the kernel when under pressure
  audit: use struct_size() helper in kmalloc()

Pull selinux updates from Paul Moore:
 "Nothing too significant, but five SELinux patches for v5.17 that do
  the following:

   - Harden the code through additional use of the struct_size() macro

   - Plug some memory leaks

   - Clean up the code via removal of the security_add_mnt_opt() LSM
     hook and minor tweaks to selinux_add_opt()

   - Rename security_task_getsecid_subj() to better reflect its actual
     behavior/use - now called security_current_getsecid_subj()"

* tag 'selinux-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: minor tweaks to selinux_add_opt()
  selinux: fix potential memleak in selinux_add_opt()
  security,selinux: remove security_add_mnt_opt()
  selinux: Use struct_size() helper in kmalloc()
  lsm: security_task_getsecid_subj() -> security_current_getsecid_subj()

Merge tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull TPM updates from Jarkko Sakkinen:
 "Other than bug fixes for TPM, this includes a patch for asymmetric
  keys to allow to look up and verify with self-signed certificates
  (keys without so called AKID - Authority Key Identifier) using a new
  "dn:" prefix in the query"

* tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  lib: remove redundant assignment to variable ret
  tpm: fix NPE on probe for missing device
  tpm: fix potential NULL pointer access in tpm_del_char_device
  tpm: Add Upgrade/Reduced mode support for TPM2 modules
  char: tpm: cr50: Set TPM_FIRMWARE_POWER_MANAGED based on device property
  keys: X.509 public key issuer lookup without AKID
  tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
  tpm: tpm_tis_spi_cr50: Add default RNG quality
  tpm/st33zp24: drop unneeded over-commenting
  tpm: add request_locality before write TPM_INT_ENABLE

Pull pcmcia updates from Dominik Brodowski:
 "A number of odd cleanups and fixes, including one for a small race in
  the handling of the pccardd kernel thread"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: fix setting of kthread task states
  MAINTAINERS: update PCMCIA tree
  pcmcia: use sysfs_emit{,_at} for sysfs output
  pcmcia: make pcmcia_release_io() void, as no-one is interested in return value
  pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in nonstatic_find_mem_region()
  pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in __nonstatic_find_io_region()
  pcmcia: comment out unused exca_readw() function
  pcmcia: Make use of the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS()
  pcmcia: clean up dead drivers for CompuLab CM-X255/CM-X270 boards

Pull gpio updates from Bartosz Golaszewski:
 "The gpio-sim module is back, this time without any changes to
  configfs. This results in a less elegant user-space interface but I
  never got any follow-up on the committable items and didn't want to
  delay this module for several more months.

  Other than that we have support for several new models and some
  support going away. We started working on converting GPIO drivers to
  using fwnode exclusively in order to limit references to OF symbols to
  gpiolib-of.c exclusively. We also have regular tweaks and improvements
  all over the place.

  Summary:

   - new testing module: gpio-sim that is scheduled to replace
     gpio-mockup

   - initial changes aiming at converting all GPIO drivers to using the
     fwnode interface and limiting any references to OF symbols to
     gpiolib-of.c

   - add support for Tegra234 and Tegra241 to gpio-tegra186

   - add support for new models (SSD201 and SSD202D) to gpio-msc313

   - add basic support for interrupts to gpio-aggregator

   - add support for AMDIF031 HID device to gpio-amdpt

   - drop support for unused platforms in gpio-xlp

   - cleanup leftovers from the removal of the legacy Samsung Exynos
     GPIO driver

   - use raw spinlocks in gpio-aspeed and gpio-aspeed-sgpio to make
     PREEMPT_RT happy

   - generalize the common 'ngpios' device property by reading it in the
     core gpiolib code so that we can remove duplicate reads from
     drivers

   - allow line names from device properties to override names set by
     drivers

   - code shrink in gpiod_add_lookup_table()

   - add new model to the DT bindings for gpio-vf610

   - convert DT bindings for tegra devices to YAML

   - improvements to interrupt handling in gpio-rcar and gpio-rockchip

   - updates to intel drivers from Andy (details in the merge commit)

   - some minor tweaks, improvements and coding-style fixes all around
     the subsystem"

* tag 'gpio-updates-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
  gpio: rcar: Propagate errors from devm_request_irq()
  gpio: rcar: Use platform_get_irq() to get the interrupt
  gpio: ts5500: Use platform_get_irq() to get the interrupt
  gpio: dwapb: Switch to use fwnode instead of of_node
  gpiolib: acpi: make fwnode take precedence in struct gpio_chip
  dt-bindings: gpio: samsung: drop unused bindings
  gpio: max3191x: Use bitmap_free() to free bitmap
  gpio: regmap: Switch to use fwnode instead of of_node
  gpio: tegra186: Add support for Tegra241
  dt-bindings: gpio: Add Tegra241 support
  gpio: brcmstb: Use local variable to access OF node
  gpio: Remove unused local OF node pointers
  gpio: sim: add missing fwnode_handle_put() in gpio_sim_probe()
  gpio: msc313: Add support for SSD201 and SSD202D
  gpio: msc313: Code clean ups
  dt-bindings: gpio: msc313: Add offsets for ssd20xd
  dt-bindings: gpio: msc313: Add compatible for ssd20xd
  gpio: sim: fix uninitialized ret variable
  gpio: Propagate firmware node from a parent device
  gpio: Setup parent device and get rid of unnecessary of_node assignment
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Use common polling loop for CMD1
   - Add support for DT compatibles for card quirks and use it for ti,wl1251
   - Fixup storing of the OCR mask for MMC_QUIRK_NONSTD_SDIO

  MMC host:
   - dw_mmc: Add support for MMC_GEN_CMDs
   - dw_mmc: Fixup calculation of the data timeout
   - dw_mmc-exynos: Add support for the ARTPEC-8 variant
   - jz4740: Add support for bi-directional DMA channels
   - mmci: Add support for eMMC HS200 mode for the stm32 sdmmc variant
   - mmci: Add support for stm32 sdmmc variant revision v2.2
   - mtk-sd: A couple of various minor improvements
   - omap_hsmmc: Drop redundant initialization for the ti,wl1251 chip
   - sdhci-esdhc-imx: Add support for the i.MXRT series variant
   - sdhci-esdhc-imx: Add Haibo Chen as maintainer
   - sdhci-pci: Add support for the Intel ADL variant
   - sdhci-pci-gli: GL975[50]: Add support for the Apple ARM64 variant
   - sdhci-pci-o2micro: Improve support for SDR104/HS200"

* tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (54 commits)
  dt-bindings: mmc: synopsys-dw-mshc: integrate Altera and Imagination
  mmc: pwrseq: Use bitmap_free() to free bitmap
  dt-bindings: mmc: PL18x stop relying on order of dma-names
  dt-bindings: mmc: sdhci-msm: Add compatible string for msm8994
  mmc: au1xmmc: propagate errors from platform_get_irq()
  mmc: sdhci-pci-o2micro: Restore the SD clock's base clock frequency
  mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode
  mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs
  mmc: mtk-sd: Fix usage of devm_clk_get_optional()
  mmc: mtk-sd: Take action for no-sdio device-tree parameter
  mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fields
  mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling
  MAINTAINERS: Add i.MX sdhci maintainer
  mmc: jz4740: Support using a bi-directional DMA channel
  dt-bindings: mmc: ingenic: Support using bi-directional DMA channel
  mmc: dw_mmc: Do not wait for DTO in case of error
  mmc: dw_mmc: Add driver callbacks for data read timeout
  mmc: dw_mmc-exynos: Add support for ARTPEC-8
  dt-bindings: mmc: exynos-dw-mshc: Add support for ARTPEC-8
  mmc: meson-mx-sdio: add IRQ check
  ...

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Prepare and add support for ACPI enumeration; lp855x_bl

  Fix-ups:
   - Use Regmap API to conduct endianess conversions; qcom-wled
   - Remove superfluous code; qcom-wled
   - Fix formatting issues; qcom-wled

  Bug Fixes:
   - Provide error checking/validation of DT supplied strings; qcom-wled
   - Request dynamic amount of values when reading from DT; qcom-wled
   - Fix off-by-one issue when reading from DT; qcom-wled"

* tag 'backlight-next-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: qcom-wled: Respect enabled-strings in set_brightness
  backlight: qcom-wled: Remove unnecessary double whitespace
  backlight: qcom-wled: Provide enabled_strings default for WLED 4 and 5
  backlight: qcom-wled: Remove unnecessary 4th default string in WLED3
  backlight: qcom-wled: Override default length with qcom,enabled-strings
  backlight: qcom-wled: Fix off-by-one maximum with default num_strings
  backlight: qcom-wled: Use cpu_to_le16 macro to perform conversion
  backlight: qcom-wled: Pass number of elements to read to read_u32_array
  backlight: qcom-wled: Validate enabled string indices in DT
  backlight: lp855x: Add support ACPI enumeration
  backlight: lp855x: Add dev helper variable to lp855x_probe()
  backlight: lp855x: Move device_config setting out of lp855x_configure()