Make tests to be two binaries 'tests_static' and 'tests_shared', so the
maintenance is easier.

Adding tests under libperf build system, so we define all the flags just
once.

Adding make-tests tule to just compile tests without running them.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Link: http://lore.kernel.org/lkml/20210706151704.73662-2-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The Intel PT decoder limits the number of unconditional branches (e.g.
jmps) decoded without consuming any trace packets. Generally, a loop
needs a conditional branch which generates a TNT packet, whereas a "ret"
instruction will generate a TIP or TNT packet. So exceeding the limit is
assumed to be a never-ending loop, which can happen if there has been a
decoding error putting the decoder at the wrong place in the code.

Up until now, the limit of 10000 has been enough but some analytic
purposes have been reported to exceed that.

Increase the limit to 100000, and make it configurable via perf config
intel-pt.max-loops. Also amend the "Never-ending loop" message to
mention the configuration entry.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210701175132.3977-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If we run a single workload that only runs on big core, there is always
a ugly message about disabling the NMI watchdog because the atom is not
counted.

Before:

  # ./perf stat true

   Performance counter stats for 'true':

                0.43 msec task-clock                #    0.396 CPUs utilized
                   0      context-switches          #    0.000 /sec
                   0      cpu-migrations            #    0.000 /sec
                  45      page-faults               #  103.918 K/sec
             639,634      cpu_core/cycles/          #    1.477 G/sec
       <not counted>      cpu_atom/cycles/                                              (0.00%)
             643,498      cpu_core/instructions/    #    1.486 G/sec
       <not counted>      cpu_atom/instructions/                                        (0.00%)
             123,715      cpu_core/branches/        #  285.694 M/sec
       <not counted>      cpu_atom/branches/                                            (0.00%)
               4,094      cpu_core/branch-misses/   #    9.454 M/sec
       <not counted>      cpu_atom/branch-misses/                                       (0.00%)

         0.001092407 seconds time elapsed

         0.001144000 seconds user
         0.000000000 seconds sys

  Some events weren't counted. Try disabling the NMI watchdog:
          echo 0 > /proc/sys/kernel/nmi_watchdog
          perf stat ...
          echo 1 > /proc/sys/kernel/nmi_watchdog

  # ./perf stat -e '{cpu_atom/cycles/,msr/tsc/}' true

   Performance counter stats for 'true':

       <not counted>      cpu_atom/cycles/                                              (0.00%)
       <not counted>      msr/tsc/                                                      (0.00%)

         0.001904106 seconds time elapsed

         0.001947000 seconds user
         0.000000000 seconds sys

  Some events weren't counted. Try disabling the NMI watchdog:
          echo 0 > /proc/sys/kernel/nmi_watchdog
          perf stat ...
          echo 1 > /proc/sys/kernel/nmi_watchdog
  The events in group usually have to be from the same PMU. Try reorganizing the group.

Now we disable the NMI watchdog message on hybrid, otherwise there
are too many false positives.

After:

  # ./perf stat true

   Performance counter stats for 'true':

                0.79 msec task-clock                #    0.419 CPUs utilized
                   0      context-switches          #    0.000 /sec
                   0      cpu-migrations            #    0.000 /sec
                  48      page-faults               #   60.889 K/sec
             777,692      cpu_core/cycles/          #  986.519 M/sec
       <not counted>      cpu_atom/cycles/                                              (0.00%)
             669,147      cpu_core/instructions/    #  848.828 M/sec
       <not counted>      cpu_atom/instructions/                                        (0.00%)
             128,635      cpu_core/branches/        #  163.176 M/sec
       <not counted>      cpu_atom/branches/                                            (0.00%)
               4,089      cpu_core/branch-misses/   #    5.187 M/sec
       <not counted>      cpu_atom/branch-misses/                                       (0.00%)

         0.001880649 seconds time elapsed

         0.001935000 seconds user
         0.000000000 seconds sys

  # ./perf stat -e '{cpu_atom/cycles/,msr/tsc/}' true

   Performance counter stats for 'true':

       <not counted>      cpu_atom/cycles/                                              (0.00%)
       <not counted>      msr/tsc/                                                      (0.00%)

         0.000963319 seconds time elapsed

         0.000999000 seconds user
         0.000000000 seconds sys
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210610034557.29766-1-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Patch adds 24x7 nest metric events for POWER10.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20210628064935.163465-1-kjain@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 48a1f565 ("perf script python: Add more PMU fields to
event handler dict") added functionality to report fields like weight,
iregs, uregs etc via perf report.  That commit predefined buffer size to
512 bytes to print those fields.

But in PowerPC, since we added extended regs support in:

  068aeea3 ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs")
  d735599a ("powerpc/perf: Add extended regs support for power10 platform")

Now iregs can carry more bytes of data and this predefined buffer size
can result to data loss in perf script output.

This patch resolves this issue by making the buffer size dynamic, based
on the number of registers needed to print. It also changes the
regs_map() return type from int to void, as it is not being used by the
set_regs_in_dict(), its only caller.

Fixes: 068aeea3 ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20210628062341.155839-1-kjain@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The install perf_dlfilter.h patch included what seems to be a typo in
the Makefile.perf, which changed the location of the trace link from
'$(DESTDIR_SQ)$(bindir_SQ)/trace' to '$(DESTDIR_SQ)$(dir_SQ)/trace'.

This reverts it back to the correct location.

Fixes: 0beb2183 ("perf build: Install perf_dlfilter.h")
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Justin M. Forbes <jmforbes@linuxtx.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706185952.116121-1-jforbes@fedoraproject.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top.

The bug is caused by the fact that secstrs is built from runtime_ss, while
shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they
point to two different ELF files.

This patch renames secstrs to secstrs_run and adds secstrs_sym, so that
the correct secstrs is chosen depending on shdr.sh_type.

  $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top
  =================================================================
  ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0
  READ of size 1 at 0x61300009add6 thread T6
    #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b)
    #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2)
    #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9
    #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9
    #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20
    #5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9
    #6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7
    #7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6
    #8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13
    #9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6
    #10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3
    #11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9
    #12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8
    #13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9
    #14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7
    #15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8
    #16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95

0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc)
allocated by thread T6 here:

    #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f)
    #1 0x7f4f6a0a88d9  (/lib64/libelf.so.1+0xa8d9)

Thread T6 created by T0 here:

    #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856)
    #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6
    #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11
    #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3
    #7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16

  SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*)
  Shadow bytes around the buggy address:
    0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
    0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
    0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
    0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa
    0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
    0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
    0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:       fa
    Freed heap region:       fd
    Stack left redzone:      f1
    Stack mid redzone:       f2
    Stack right redzone:     f3
    Stack after return:      f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:       f6
    Poisoned by user:        f7
    Container overflow:      fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
    Shadow gap:              cc
  ==363148==ABORTING
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210621222108.196219-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If the disasm is empty, 's' should fail. Instead it seemingly works,
hiding the empty lines and causing an assertion error on the next time
annotate is called (from within perf report).

The problem is caused by a buffer overflow, caused by a wrong exit
condition in annotate_browser__find_next_asm_line, which checks
browser->b.top instead of browser->b.entries.

This patch fixes the issue, making annotate_browser__toggle_source
fail if the disasm is empty (nothing happens to the user).

Fixes: 6de249d6 ("perf annotate: Allow 's' on source code lines")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210705161524.72953-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix the perf-probe --functions option do not show the PLT
stub symbols (*@plt) by default.

  -----
  $ ./perf probe -x /usr/lib64/libc-2.33.so -F | head
  a64l
  abort
  abs
  accept
  accept4
  access
  acct
  addmntent
  addseverity
  adjtime
  -----
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhriamat@kernel.org>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Link: http://lore.kernel.org/lkml/162532653450.393143.12621329879630677469.stgit@devnote2Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In Fedora34, libc-2.33.so has both .dynsym and .symtab sections and
most of (not all) symbols moved to .dynsym. In this case, perf only
decode the symbols in .symtab, and perf probe can not list up the
functions in the library.

To fix this issue, decode both .symtab and .dynsym sections.

Without this fix,
  -----
  $ ./perf probe -x /usr/lib64/libc-2.33.so -F
  @plt
  @plt
  calloc@plt
  free@plt
  malloc@plt
  memalign@plt
  realloc@plt
  -----

With this fix.

  -----
  $ ./perf probe -x /usr/lib64/libc-2.33.so -F
  @plt
  @plt
  a64l
  abort
  abs
  accept
  accept4
  access
  acct
  addmntent
  -----
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Link: http://lore.kernel.org/lkml/162532652681.393143.10163733179955267999.stgit@devnote2Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix debuginfo__new() to set the build-id to dso before
dso__read_binary_type_filename() so that it can find
DSO_BINARY_TYPE__BUILDID_DEBUGINFO debuginfo correctly.

However, this may not change the result, because elfutils (libdwfl) has
its own debuginfo finder. With/without this patch, the perf probe
correctly find the debuginfo file.

This is just a failsafe and keep code's sanity (if you use
dso__read_binary_type_filename(), you must set the build-id to the dso.)
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhriamat@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Link: http://lore.kernel.org/lkml/162532651863.393143.11692691321219235810.stgit@devnote2Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in these csets:

  64c2c2c6 ("quota: Change quotactl_path() systcall to an fd-based one")
  65ffb3d6 ("quota: Wire up quotactl_fd syscall")

That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.

For instance, this is now possible:

  # perf trace -v -e quota*
  event qualifier tracepoint filter: (common_pid != 158365 && common_pid != 2512) && (id == 179 || id == 443)
  ^C#

That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.

  $ grep quota tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  179	common	quotactl		sys_quotactl
  443	common	quotactl_fd		sys_quotactl_fd
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
  diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

Fixes: 4ca9b385 ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")

That result in these changes in the tools:

  $ tools/perf/trace/beauty/madvise_behavior.sh > before
  $ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
  $ tools/perf/trace/beauty/madvise_behavior.sh > after
  $ diff -u before after
  --- before	2021-07-05 14:30:15.167212621 -0300
  +++ after	2021-07-05 14:30:26.638462594 -0300
  @@ -18,6 +18,8 @@
   	[19] = "KEEPONFORK",
   	[20] = "COLD",
   	[21] = "PAGEOUT",
  +	[22] = "POPULATE_READ",
  +	[23] = "POPULATE_WRITE",
   	[100] = "HWPOISON",
   	[101] = "SOFT_OFFLINE",
   };
  $

I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.

This addresses the following perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
  diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h

Cc: David Hildenbrand <david@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Picking the changes from:

  2e290c8d ("drm: document minimum kernel version for DRM_CLIENT_CAP_*")
  bbf4627b ("drm: clarify and linkify DRM_CLIENT_CAP_WRITEBACK_CONNECTORS docs")
  88938bf3 ("drm: reference mode flags in DRM_CLIENT_CAP_* docs")

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

No changes in tooling as these are just C comment documentation changes.

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  2459e56f ("drm/i915/uapi: implement object placement extension")
  ebcb4029 ("drm/i915/uapi: introduce drm_i915_gem_create_ext")
  71021729 ("drm/i915/query: Expose memory regions through the query uAPI")
  e3bdccaf ("drm/i915/uapi: convert i915_query and friend to kernel doc")
  19d053d4 ("drm/i915/uapi: convert i915_user_extension to kernel doc")
  2ef6a01f ("drm/i915/uapi: fix kernel doc warnings")

That picks a new ioctl:

  $ tools/perf/trace/beauty/drm_ioctl.sh > before
  $ cp include/uapi/drm/i915_drm.h tools/include/uapi/drm/i915_drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh > after
  $ diff -u before after
  --- before	2021-07-05 14:25:13.247680316 -0300
  +++ after	2021-07-05 14:25:22.454874111 -0300
  @@ -166,4 +166,5 @@
   	[DRM_COMMAND_BASE + 0x39] = "I915_QUERY",
   	[DRM_COMMAND_BASE + 0x3a] = "I915_GEM_VM_CREATE",
   	[DRM_COMMAND_BASE + 0x3b] = "I915_GEM_VM_DESTROY",
  +	[DRM_COMMAND_BASE + 0x3c] = "I915_GEM_CREATE_EXT",
   };
  $

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Picking the changes from:

  08fdced6 ("ALSA: rawmidi: Add framing mode")

Which entails no changes in the tooling side as it doesn't introduce new
ioctls.

To silence this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
  diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

Cc: David Henningsson <coding@diwic.se>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Recently bperf was added to use BPF to count perf events for various
purposes.  This is an extension for the approach and targetting to
cgroup usages.

Unlike the other bperf, it doesn't share the events with other
processes but it'd reduce unnecessary events (and the overhead of
multiplexing) for each monitored cgroup within the perf session.

When --for-each-cgroup is used with --bpf-counters, it will open
cgroup-switches event per cpu internally and attach the new BPF
program to read given perf_events and to aggregate the results for
cgroups.  It's only called when task is switched to a task in a
different cgroup.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210701211227.1403788-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Current 'perf report' fails to process a pipe input when --task or
--stat options are used.  This is because they reset all the tool
callbacks and fails to find a matching event for a sample.

When pipe input is used, the event info is passed via ATTR records so it
needs to handle that operation.  Otherwise the following error occurs.
Note, -14 (= -EFAULT) comes from evlist__parse_sample():

  # perf record -a -o- sleep 1 | perf report -i- --stat
  Can't parse sample, err = -14
  0x271044 [0x38]: failed to process type: 9
  Error:
  failed to process sample
  #

Committer testing:

Before:

  $ perf record -o- sleep 1 | perf report -i- --stat
  Can't parse sample, err = -14
  [ perf record: Woken up 1 times to write data ]
  0x1350 [0x30]: failed to process type: 9
  Error:
  failed to process sample
  [ perf record: Captured and wrote 0.000 MB - ]
  $

After:

  $ perf record -o- sleep 1 | perf report -i- --stat
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.000 MB - ]

  Aggregated stats:
             TOTAL events:         41
              COMM events:          2  ( 4.9%)
              EXIT events:          1  ( 2.4%)
            SAMPLE events:          9  (22.0%)
             MMAP2 events:          4  ( 9.8%)
              ATTR events:          1  ( 2.4%)
    FINISHED_ROUND events:          1  ( 2.4%)
        THREAD_MAP events:          1  ( 2.4%)
           CPU_MAP events:          1  ( 2.4%)
      EVENT_UPDATE events:          1  ( 2.4%)
         TIME_CONV events:          1  ( 2.4%)
           FEATURE events:         19  (46.3%)
  cycles:uhH stats:
            SAMPLE events:          9
  $

Fixes: a4a4d0a7 ("perf report: Add --stats option to display quick data statistics")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210630043058.1131295-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This warning was there to catch any architectures that still use
CONFIG_SET_FS, and that would mis-use iov_iter_init() for anything that
wasn't a proper user space pointer.  So that

        WARN_ON_ONCE(uaccess_kernel());

makes perfect conceptual sense: you really shouldn't use a kernel
pointer with set_fs(KERNEL_DS) and then pass it to iov_iter_init().

HOWEVER.

Guenter Roeck reports that this warning actually triggers in no-mmu
configurations of both ARM and m68k.  And the reason isn't that they
pass in a kernel pointer under set_fs(KERNEL_DS) at all: the reason is
that in those configurations, "uaccess_kernel()" is simply not reliable.

Those no-mmu setups set USER_DS and KERNEL_DS to the same values, so you
can't test for the difference.

In particular, the no-mmu case for ARM does

   #define USER_DS                 KERNEL_DS
   #define uaccess_kernel()        (true)

so USER_DS and KERNEL_DS have the same value, and uaccess_kernel() is
always trivially true.

The m68k case is slightly different and not quite as obvious.  It does
(spread out over multiple header files just to be extra exciting:
asm/processor.h, asm/segment.h and asm-generic/uaccess.h):

   #define TASK_SIZE       (0xFFFFFFFFUL)
   #define USER_DS         MAKE_MM_SEG(TASK_SIZE)
   #define KERNEL_DS       MAKE_MM_SEG(~0UL)
   #define get_fs()        (current_thread_info()->addr_limit)
   #define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)

but the end result is the same: uaccess_kernel() will always be true,
because USER_DS and KERNEL_DS end up having the same value, even if that
value is defined differently.

This is very arguably a misfeature in those implementations, but in the
end we don't really care.  All modern architectures have gotten rid of
set_fs() already, and generic kernel code never uses it.  And while the
sanity check was a nice idea, an architecture would have to go the extra
mile to actually break this.

So this well-intentioned warning isn't really all that likely to find
anything but these known false positives, and as such just isn't worth
maintaining.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 8cd54c1c ("iov_iter: separate direction from flavour")
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'core-rcu-2021.07.04' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Bitmap parsing support for "all" as an alias for all bits

 - Documentation updates

 - Miscellaneous fixes, including some that overlap into mm and lockdep

 - kvfree_rcu() updates

 - mem_dump_obj() updates, with acks from one of the slab-allocator
   maintainers

 - RCU NOCB CPU updates, including limited deoffloading

 - SRCU updates

 - Tasks-RCU updates

 - Torture-test updates

* 'core-rcu-2021.07.04' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (78 commits)
  tasks-rcu: Make show_rcu_tasks_gp_kthreads() be static inline
  rcu-tasks: Make ksoftirqd provide RCU Tasks quiescent states
  rcu: Add missing __releases() annotation
  rcu: Remove obsolete rcu_read_unlock() deadlock commentary
  rcu: Improve comments describing RCU read-side critical sections
  rcu: Create an unrcu_pointer() to remove __rcu from a pointer
  srcu: Early test SRCU polling start
  rcu: Fix various typos in comments
  rcu/nocb: Unify timers
  rcu/nocb: Prepare for fine-grained deferred wakeup
  rcu/nocb: Only cancel nocb timer if not polling
  rcu/nocb: Delete bypass_timer upon nocb_gp wakeup
  rcu/nocb: Cancel nocb_timer upon nocb_gp wakeup
  rcu/nocb: Allow de-offloading rdp leader
  rcu/nocb: Directly call __wake_nocb_gp() from bypass timer
  rcu: Don't penalize priority boosting when there is nothing to boost
  rcu: Point to documentation of ordering guarantees
  rcu: Make rcu_gp_cleanup() be noinline for tracing
  rcu: Restrict RCU_STRICT_GRACE_PERIOD to at most four CPUs
  rcu: Make show_rcu_gp_kthreads() dump rcu_node structures blocking GP
  ...

Pull lkmm fixlet from Paul E McKenney.

Fix missing underscore in Linux-kernel memory model docs.

* 'lkmm.2021.05.10c' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools/memory-model: Fix smp_mb__after_spinlock() spelling

Pull KCSAN updates from Paul McKenney.

* 'kcsan.2021.05.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: Use URL link for pointing access-marking.txt
  kcsan: Document "value changed" line
  kcsan: Report observed value changes
  kcsan: Remove kcsan_report_type
  kcsan: Remove reporting indirection
  kcsan: Refactor access_info initialization
  kcsan: Fold panic() call into print_report()
  kcsan: Refactor passing watchpoint/other_info
  kcsan: Distinguish kcsan_report() calls
  kcsan: Simplify value change detection
  kcsan: Add pointer to access-marking.txt to data_race() bullet

Pull memblock updates from Mike Rapoport:
 "Fix arm crashes caused by holes in the memory map.

  The coordination between freeing of unused memory map, pfn_valid() and
  core mm assumptions about validity of the memory map in various ranges
  was not designed for complex layouts of the physical memory with a lot
  of holes all over the place.

  Kefen Wang reported crashes in move_freepages() on a system with the
  following memory layout [1]:

	node 0: [mem 0x0000000080a00000-0x00000000855fffff]
	node 0: [mem 0x0000000086a00000-0x0000000087dfffff]
	node 0: [mem 0x000000008bd00000-0x000000008c4fffff]
	node 0: [mem 0x000000008e300000-0x000000008ecfffff]
	node 0: [mem 0x0000000090d00000-0x00000000bfffffff]
	node 0: [mem 0x00000000cc000000-0x00000000dc9fffff]
	node 0: [mem 0x00000000de700000-0x00000000de9fffff]
	node 0: [mem 0x00000000e0800000-0x00000000e0bfffff]
	node 0: [mem 0x00000000f4b00000-0x00000000f6ffffff]
	node 0: [mem 0x00000000fda00000-0x00000000ffffefff]

  These crashes can be mitigated by enabling CONFIG_HOLES_IN_ZONE on ARM
  and essentially turning pfn_valid_within() to pfn_valid() instead of
  having it hardwired to 1 on that architecture, but this would require
  to keep CONFIG_HOLES_IN_ZONE solely for this purpose.

  A cleaner approach is to update ARM's implementation of pfn_valid() to
  take into accounting rounding of the freed memory map to pageblock
  boundaries and make sure it returns true for PFNs that have memory map
  entries even if there is no physical memory backing those PFNs"

Link: https://lore.kernel.org/lkml/2a1592ad-bc9d-4664-fd19-f7448a37edc0@huawei.com [1]

* tag 'memblock-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  arm: extend pfn_valid to take into account freed memory map alignment
  memblock: ensure there is no overflow in memblock_overlaps_region()
  memblock: align freed memory map on pageblock boundaries with SPARSEMEM
  memblock: free_unused_memmap: use pageblock units instead of MAX_ORDER

Pull s390 updates from Vasily Gorbik:

 - Rework inline asm to get rid of error prone "register asm"
   constructs, which are problematic especially when code
   instrumentation is enabled.

   In particular introduce and use register pair union to allocate
   even/odd register pairs. Unfortunately this breaks compatibility with
   older clang compilers and minimum clang version for s390 has been
   raised to 13.

     https://lore.kernel.org/linux-next/CAK7LNARuSmPCEy-ak0erPrPTgZdGVypBROFhtw+=3spoGoYsyw@mail.gmail.com/

 - Fix gcc 11 warnings, which triggered various minor reworks all over
   the code.

 - Add zstd kernel image compression support.

 - Rework boot CPU lowcore handling.

 - De-duplicate and move kernel memory layout setup logic earlier.

 - Few fixes in preparation for FORTIFY_SOURCE performing compile-time
   and run-time field bounds checking for mem functions.

 - Remove broken and unused power management support leftovers in s390
   drivers.

 - Disable stack-protector for decompressor and purgatory to fix
   buildroot build.

 - Fix vt220 sclp console name to match the char device name.

 - Enable HAVE_IOREMAP_PROT and add zpci_set_irq()/zpci_clear_irq() in
   zPCI code.

 - Remove some implausible WARN_ON_ONCEs and remove arch specific
   counter transaction call backs in favour of default transaction
   handling in perf code.

 - Extend/add new uevents for online/config/mode state changes of AP
   card / queue device in zcrypt.

 - Minor entry and ccwgroup code improvements.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (91 commits)
  s390/dasd: use register pair instead of register asm
  s390/qdio: get rid of register asm
  s390/ioasm: use symbolic names for asm operands
  s390/ioasm: get rid of register asm
  s390/cmf: get rid of register asm
  s390/lib,string: get rid of register asm
  s390/lib,uaccess: get rid of register asm
  s390/string: get rid of register asm
  s390/cmpxchg: use register pair instead of register asm
  s390/mm,pages-states: get rid of register asm
  s390/lib,xor: get rid of register asm
  s390/timex: get rid of register asm
  s390/hypfs: use register pair instead of register asm
  s390/zcrypt: Switch to flexible array member
  s390/speculation: Use statically initialized const for instructions
  virtio/s390: get rid of open-coded kvm hypercall
  s390/pci: add zpci_set_irq()/zpci_clear_irq()
  scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0 for s390
  s390/ipl: use register pair instead of register asm
  s390/mem_detect: fix tprot() program check new psw handling
  ...

Pull arch/csky updates from Guo Ren:
 "A small cleanup and a fixup"

* tag 'csky-for-linus-5.14-rc1' of git://github.com/c-sky/csky-linux:
  csky: Kconfig: Remove unused selects
  csky: syscache: Fixup duplicate cache flush

Pull CXL (Compute Express Link) updates from Dan Williams:
 "This subsystem is still in the build-out phase as the bulk of the
  update is improvements to enumeration and fleshing out the device
  model. In terms of new features, more mailbox commands have been added
  to the allowed-list in support of persistent memory provisioning
  support targeting v5.15.

  The critical update from an enumeration perspective is support for the
  CXL Fixed Memory Window Structure that indicates to Linux which system
  physical address ranges decode to the CXL Host Bridges in the system.
  This allows the driver to detect which address ranges have been mapped
  by firmware and what address ranges are available for future hotplug.

  So, again, mostly skeleton this round, with more meat targeting v5.15.

  Summary:

   - Add support for the CXL Fixed Memory Window Structure, a recent
     extension of the ACPI CEDT (CXL Early Discovery Table)

   - Add infrastructure for component registers

   - Add HDM (Host-managed device memory) decoder definitions

   - Define a device model for an HDM decoder tree

   - Bridge CXL persistent memory capabilities to an NVDIMM bus /
     device-model

   - Switch to fine grained mapping of CXL MMIO registers to allow
     different drivers / system software to own individual register
     blocks

   - Enable media provisioning commands, and publish the label storage
     area size in sysfs

   - Miscellaneous cleanups and fixes"

* tag 'cxl-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (34 commits)
  cxl/pci: Rename CXL REGLOC ID
  cxl/acpi: Use the ACPI CFMWS to create static decoder objects
  cxl/acpi: Add the Host Bridge base address to CXL port objects
  cxl/pmem: Register 'pmem' / cxl_nvdimm devices
  libnvdimm: Drop unused device power management support
  libnvdimm: Export nvdimm shutdown helper, nvdimm_delete()
  cxl/pmem: Add initial infrastructure for pmem support
  cxl/core: Add cxl-bus driver infrastructure
  cxl/pci: Add media provisioning required commands
  cxl/component_regs: Fix offset
  cxl/hdm: Fix decoder count calculation
  cxl/acpi: Introduce cxl_decoder objects
  cxl/acpi: Enumerate host bridge root ports
  cxl/acpi: Add downstream port data to cxl_port instances
  cxl/Kconfig: Default drivers to CONFIG_CXL_BUS
  cxl/acpi: Introduce the root of a cxl_port topology
  cxl/pci: Fixup devm_cxl_iomap_block() to take a 'struct device *'
  cxl/pci: Add HDM decoder capabilities
  cxl/pci: Reserve individual register block regions
  cxl/pci: Map registers based on capabilities
  ...

Pull i2c updates from Wolfram Sang:

 - core supports now bus regulators controlling power for SCL/SDA

 - quite some DT binding conversions to YAML

 - added a seperate DT binding for the optional SMBus Alert feature

 - documentation with examples how to deal with I2C sysfs files

 - some bigger rework for the i801 driver

 - and a few usual driver updates

* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (42 commits)
  i2c: ali1535: mention that the device should not be disabled
  i2c: mpc: Restore reread of I2C status register
  i2c: core-smbus: Expose PEC calculate function for generic use
  Documentation: i2c: Add doc for I2C sysfs
  i2c: core: Disable client irq on reboot/shutdown
  dt-bindings: i2c: update bindings for MT8195 SoC
  i2c: imx: Fix some checkpatch warnings
  i2c: davinci: Simplify with dev_err_probe()
  i2c: cadence: Simplify with dev_err_probe()
  i2c: xiic: Simplify with dev_err_probe()
  i2c: cadence: Clear HOLD bit before xfer_size register rolls over
  dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  i2c: i801: Improve i801_setup_hstcfg
  i2c: i801: Use driver name constant instead of function dev_driver_string
  i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves
  i2c: i801: Improve status polling
  i2c: cht-wc: Replace of_node by NULL
  i2c: riic: Add RZ/G2L support
  dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
  dt-bindings: i2c: renesas,iic: Convert to json-schema
  ...

Commit d2bcbeab ("scsi: blkcg: Add app identifier support for
blkcg") introduced an FC_APPID config option under SCSI. However, the
added config option is not used anywhere. Simply remove it.

The block layer BLK_CGROUP_FC_APPID config option is what actually
controls whether the application ID code should be built or not. Make
this option dependent on NVMe over FC since that is currently the only
transport which supports the capability.

Fixes: d2bcbeab ("scsi: blkcg: Add app identifier support for blkcg")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - GENERIC_ALLOCATOR is duplicated
 - Remove USB_ARCH_HAS_OHCI & USB_ARCH_HAS_EHCI, because they
   have been removed from linux.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

The current csky logic of sys_cacheflush is wrong, it'll cause
icache flush call dcache flush again. Now fixup it with a
conditional "break & fallthrough".

Fixes: 997153b9 ("csky: Add flush_icache_mm to defer flush icache all")
Fixes: 0679d29d ("csky: fix syscache.c fallthrough warning")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Co-Developed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

Pull LED updates from Pavel Machek:
 "This contains quite a lot of fixes, with more fixes in my inbox that
  did not make it (sorry)"

* tag 'leds-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (36 commits)
  leds: lgm: Fix up includes
  leds: ktd2692: Fix an error handling path
  leds: as3645a: Fix error return code in as3645a_parse_node()
  leds: turris-omnia: add missing MODULE_DEVICE_TABLE
  leds: lp55xx: Initialize enable GPIO direction to output
  leds: lm36274: Add missed property.h
  leds: el15203000: Make error handling more robust
  leds: pwm: Make error handling more robust
  leds: lt3593: Make use of device properties
  leds: lp50xx: Put fwnode in error case during ->probe()
  leds: lm3697: Don't spam logs when probe is deferred
  leds: lm3692x: Put fwnode in any case during ->probe()
  leds: lm36274: Correct headers (of*.h -> mod_devicetable.h)
  leds: lm36274: Put fwnode in error case during ->probe()
  leds: lm3532: Make error handling more robust
  leds: lm3532: select regmap I2C API
  leds: lgm-sso: Drop duplicate NULL check for GPIO operations
  leds: lgm-sso: Remove unneeded of_match_ptr()
  leds: lgm-sso: Fix clock handling
  leds: el15203000: Introduce to_el15203000_led() helper
  ...

Pull VFIO updates from Alex Williamson:

 - Module reference fixes, structure renaming (Max Gurtovoy)

 - Export and use common pci_dev_trylock() (Luis Chamberlain)

 - Enable direct mdev device creation and probing by parent (Christoph
   Hellwig & Jason Gunthorpe)

 - Fix mdpy error path leak (Colin Ian King)

 - Fix mtty list entry leak (Jason Gunthorpe)

 - Enforce mtty device limit (Alex Williamson)

 - Resolve concurrent vfio-pci mmap faults (Alex Williamson)

* tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Handle concurrent vma faults
  vfio/mtty: Enforce available_instances
  vfio/mtty: Delete mdev_devices_list
  vfio: use the new pci_dev_trylock() helper to simplify try lock
  PCI: Export pci_dev_trylock() and pci_dev_unlock()
  vfio/mdpy: Fix memory leak of object mdev_state->vconfig
  vfio/iommu_type1: rename vfio_group struck to vfio_iommu_group
  vfio/mbochs: Convert to use vfio_register_group_dev()
  vfio/mdpy: Convert to use vfio_register_group_dev()
  vfio/mtty: Convert to use vfio_register_group_dev()
  vfio/mdev: Allow the mdev_parent_ops to specify the device driver to bind
  vfio/mdev: Remove CONFIG_VFIO_MDEV_DEVICE
  driver core: Export device_driver_attach()
  driver core: Don't return EPROBE_DEFER to userspace during sysfs bind
  driver core: Flow the return code from ->probe() through to sysfs bind
  driver core: Better distinguish probe errors in really_probe
  driver core: Pull required checks into driver_probe_device()
  vfio/platform: remove unneeded parent_module attribute
  vfio: centralize module refcount in subsystem layer

Pull vfs name lookup updates from Al Viro:
 "Small namei.c patch series, mostly to simplify the rules for nameidata
  state. It's actually from the previous cycle - but I didn't post it
  for review in time...

  Changes visible outside of fs/namei.c: file_open_root() calling
  conventions change, some freed bits in LOOKUP_... space"

* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  namei: make sure nd->depth is always valid
  teach set_nameidata() to handle setting the root as well
  take LOOKUP_{ROOT,ROOT_GRABBED,JUMPED} out of LOOKUP_... space
  switch file_open_root() to struct path

Pull iov_iter updates from Al Viro:
 "iov_iter cleanups and fixes.

  There are followups, but this is what had sat in -next this cycle. IMO
  the macro forest in there became much thinner and easier to follow..."

* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  csum_and_copy_to_pipe_iter(): leave handling of csum_state to caller
  clean up copy_mc_pipe_to_iter()
  pipe_zero(): we don't need no stinkin' kmap_atomic()...
  iov_iter: clean csum_and_copy_...() primitives up a bit
  copy_page_from_iter(): don't need kmap_atomic() for kvec/bvec cases
  copy_page_to_iter(): don't bother with kmap_atomic() for bvec/kvec cases
  iterate_xarray(): only of the first iteration we might get offset != 0
  pull handling of ->iov_offset into iterate_{iovec,bvec,xarray}
  iov_iter: make iterator callbacks use base and len instead of iovec
  iov_iter: make the amount already copied available to iterator callbacks
  iov_iter: get rid of separate bvec and xarray callbacks
  iov_iter: teach iterate_{bvec,xarray}() about possible short copies
  iterate_bvec(): expand bvec.h macro forest, massage a bit
  iov_iter: unify iterate_iovec and iterate_kvec
  iov_iter: massage iterate_iovec and iterate_kvec to logics similar to iterate_bvec
  iterate_and_advance(): get rid of magic in case when n is 0
  csum_and_copy_to_iter(): massage into form closer to csum_and_copy_from_iter()
  iov_iter: replace iov_iter_copy_from_user_atomic() with iterator-advancing variant
  [xarray] iov_iter_npages(): just use DIV_ROUND_UP()
  iov_iter_npages(): don't bother with iterate_all_kinds()
  ...

Pull vfs d_path() updates from Al Viro:
 "d_path.c refactoring"

* 'work.d_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  getcwd(2): clean up error handling
  d_path: prepend_path() is unlikely to return non-zero
  d_path: prepend_path(): lift the inner loop into a new helper
  d_path: prepend_path(): lift resetting b in case when we'd return 3 out of loop
  d_path: prepend_path(): get rid of vfsmnt
  d_path: introduce struct prepend_buffer
  d_path: make prepend_name() boolean
  d_path: lift -ENAMETOOLONG handling into callers of prepend_path()
  d_path: don't bother with return value of prepend()
  getcwd(2): saner logics around prepend_path() call
  d_path: get rid of path_with_deleted()
  d_path: regularize handling of root dentry in __dentry_path()
  d_path: saner calling conventions for __dentry_path()
  d_path: "\0" is {0,0}, not {0}

Pull tracing updates from Steven Rostedt:

 - Added option for per CPU threads to the hwlat tracer

 - Have hwlat tracer handle hotplug CPUs

 - New tracer: osnoise, that detects latency caused by interrupts,
   softirqs and scheduling of other tasks.

 - Added timerlat tracer that creates a thread and measures in detail
   what sources of latency it has for wake ups.

 - Removed the "success" field of the sched_wakeup trace event. This has
   been hardcoded as "1" since 2015, no tooling should be looking at it
   now. If one exists, we can revert this commit, fix that tool and try
   to remove it again in the future.

 - tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.

 - New boot command line option "tp_printk_stop", as tp_printk causes
   trace events to write to console. When user space starts, this can
   easily live lock the system. Having a boot option to stop just after
   boot up is useful to prevent that from happening.

 - Have ftrace_dump_on_oops boot command line option take numbers that
   match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.

 - Bootconfig clean ups, fixes and enhancements.

 - New ktest script that tests bootconfig options.

 - Add tracepoint_probe_register_may_exist() to register a tracepoint
   without triggering a WARN*() if it already exists. BPF has a path
   from user space that can do this. All other paths are considered a
   bug.

 - Small clean ups and fixes

* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
  tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
  tracing: Simplify & fix saved_tgids logic
  treewide: Add missing semicolons to __assign_str uses
  tracing: Change variable type as bool for clean-up
  trace/timerlat: Fix indentation on timerlat_main()
  trace/osnoise: Make 'noise' variable s64 in run_osnoise()
  tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
  tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
  Documentation: Fix a typo on trace/osnoise-tracer
  trace/osnoise: Fix return value on osnoise_init_hotplug_support
  trace/osnoise: Make interval u64 on osnoise_main
  trace/osnoise: Fix 'no previous prototype' warnings
  tracing: Have osnoise_main() add a quiescent state for task rcu
  seq_buf: Make trace_seq_putmem_hex() support data longer than 8
  seq_buf: Fix overflow in seq_buf_putmem_hex()
  trace/osnoise: Support hotplug operations
  trace/hwlat: Support hotplug operations
  trace/hwlat: Protect kdata->kthread with get/put_online_cpus
  trace: Add timerlat tracer
  trace: Add osnoise tracer
  ...

Pull devicetree updates from Rob Herring:

 - Refine reserved memory nomap handling

 - Merge some PCI and non-PCI address handling implementations

 - Simplify of_address.h header ifdefs

 - Improve printk handling of some 64-bit types

 - Convert adi,adv7511, Arm ccree, Arm SCMI, Arm SCU, Arm TWD timer, Arm
   VIC, arm,sbsa-gwdt, Arm/Amlogic SCPI, Aspeed I2C, Broadcom iProc PWM,
   linaro,optee-tz, MDIO GPIO, Mediatek RNG, MTD physmap, NXP
   pcf8563/pcf85263/pcf85363, Renesas TPU, renesas,emev2-smu,
   renesas,r9a06g032-sysctrl, sysc-rmobile, Tegra20 EMC, TI AM56 PCI, TI
   OMAP mailbox, TI SCI bindings, virtio-mmio, Zynq FPGA, and ZynqMP RTC
   to DT schema

 - Convert mux and mux controller bindings to schema. This includes MDIO
   IIO, and I2C muxes.

 - Add Arm PL031 RTC binding schema

 - Add vendor prefixes for StarFive Technology Co. Ltd. and Insignal Ltd

 - Fix some stale doc references

 - Remove stale property-units.txt. Superseded by schema in dt-schema
   repo.

 - Fixes for 'unevaluatedProperties' handling (enabled with experimental
   json-schema support)

 - Drop redundant usage of minItems and maxItems across the tree

 - Update some examples to use bindings with a schema

* tag 'devicetree-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (83 commits)
  dt-bindings: Fix 'unevaluatedProperties' errors in DT graph users
  dt-bindings: display: renesas,du: Fix 'ports' reference
  dt-bindings: media: adv7180: Add missing video-interfaces.yaml reference
  dt-bindings: crypto: ccree: Convert to json-schema
  dt-bindings: fpga: zynq: convert bindings to YAML
  dt-bindings: rtc: zynqmp: convert bindings to YAML
  dt-bindings: interrupt-controller: Convert ARM VIC to json-schema
  of: of_reserved_mem: mark nomap memory instead of removing
  of: of_reserved_mem: only call memblock_free for normal reserved memory
  dt-bindings: Drop redundant minItems/maxItems
  dt-bindings: spmi: Correct 'reg' schema
  of: reserved-memory: Add stub for RESERVEDMEM_OF_DECLARE()
  dt-bindings: clk: vc5: Fix example
  dt-bindings: timer: renesas,tmu: add r8a779a0 TMU support
  dt-bindings: drm: bridge: adi,adv7511.txt: convert to yaml
  dt-bindings: PCI: ti,am65: Convert PCIe host/endpoint mode dt-bindings to YAML
  of: Remove superfluous casts when printing u64 values
  of: Fix truncation of memory sizes on 32-bit platforms
  dt-bindings: rtc: nxp,pcf8563: Absorb pcf85263/pcf85363 bindings
  dt-bindings: pwm: Use examples with documented/matching schema
  ...

This reverts commit 9ce650a7.

This commit causes watchdog lockups on my machine, and while I have no
idea what the cause is, it bisected right to this commit, and reverting
the change promptly fixes it.

At least occasionally one of the watchdog call traces was

  Call Trace:
    _raw_spin_lock_irqsave+0x35/0x40
    snd_pcm_period_elapsed+0x1b/0xa0 [snd_pcm]
    snd_usb_endpoint_start+0x1a0/0x3c0 [snd_usb_audio]
    start_endpoints+0x23/0x90 [snd_usb_audio]
    snd_usb_substream_playback_trigger+0x7b/0x1a0 [snd_usb_audio]
    snd_pcm_common_ioctl+0x1c44/0x2360 [snd_pcm]
    snd_pcm_ioctl+0x2e/0x40 [snd_pcm]
    __se_sys_ioctl+0x72/0xc0
    do_syscall_64+0x4c/0xa0
    entry_SYSCALL_64_after_hwframe+0x44/0xae

so presumably it's a locking error on that substream spinlock that
snd_pcm_period_elapsed() takes.  But at this point I just want to have a
working system so that I can continue the merge window work tomorrow.

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound updates from Takashi Iwai:
 "As the diffstat scatters over the tree, we've got many tree-wide small
  changes, but also got quite a few intrusive changes in the core side.
  The only ABI-visible core change is the new rawmidi framing mode
  support while others are kernel-internal, mostly code refactoring
  and/or nice improvements.

  Here are some highlights:

  Core:
   - A new framing access mode for rawmidi to get timestamps
   - Cleanup / refactoring of buffer memory management helper code
   - Support for automatic negotiation of ASoC DAI formats
   - Revival of software suspend for PCM and control core, as a
     preliminary work for PCI BAR rescan support

  ASoC:
   - Accessory detection support for several Qualcomm parts
   - Support for IEC958 control with hdmi-codec
   - Merging of Tegra machine drivers into a single driver
   - Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
     i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
     Quinary MI2S, Texas Instruments TAS2505

  USB-audio:
   - Reduction of latency at playback start
   - Code cleanup / fixes of usx2y driver
   - Scarlett2 mixer code fixes and enhancements
   - Quirks for Ozone and Denon devices

  HD-audio:
   - A few quirks for HP and ASUS machines
   - Display power management fixes

  Others:
   - FireWire code refactoring and enhancements
   - Tree-wide trivial coding-style fixes"

* tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
  ALSA: usb-audio: scarlett2: Fix for loop increment in scarlett2_usb_get_config
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
  ALSA: hda/realtek - Add ALC285 HP init procedure
  ALSA: hda/realtek - Add type for ALC287
  ALSA: scarlett2: Fix scarlett2_*_ctl_put() return values again
  ALSA: scarlett2: Fix pad count for 18i8 Gen 3
  ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
  ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
  ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
  ALSA: hda: Release codec display power during shutdown/reboot
  ALSA: hda: Release controller display power during shutdown/reboot
  ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
  ASoC: fsl: remove unnecessary oom message
  ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
  ASoC: tlv320aic32x4: add support for TAS2505
  ASoC: tlv320aic32x4: add type to device private data struct
  ASoC: tegra30: ahub: Use devm_platform_get_and_ioremap_resource()
  ASoC: tegra: tegra210_admaif: Use devm_platform_get_and_ioremap_resource()
  ...

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...