- 06 Dec, 2021 8 commits
-
-
Alexander Stein authored
This adds support for TQMa8MQNL module on MBa8Mx board. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Alexander Stein authored
This adds support for TQMa8MQML module on MBa8Mx board. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jacky Bai authored
Add the basic dts file for i.MX8ULP EVK board. Only the necessary devices for minimal system boot up are enabled: enet, emmc, usb, console uart. some of the devices' pin status may lost during low power mode, so additional sleep pinctrl properties are included by default. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Jacky Bai authored
Add the basic dtsi support for i.MX8ULP. i.MX 8ULP is part of the ULP family with emphasis on extreme low-power techniques using the 28 nm fully depleted silicon on insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based on asymmetric architecture, however will add a third DSP domain for advanced voice/audio capability and a Graphics domain where it is possible to access graphics resources from the application side or the realtime side. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Adam Ford authored
The baseboard has support for a TDNext 5640 Camera which uses an OV5640 connected to a 2-lane CSI2 interface. With the CSI and mipi_csi2 drivers pointing to an OV5640 camera, the media pipeline can be configured with the following: media-ctl --links "'ov5640 1-003c':0->'imx7-mipi-csis.0':0[1]" The camera and various nodes in the pipeline can be configured for UYVY: media-ctl -v -V "'ov5640 1-003c':0 [fmt:UYVY8_1X16/640x480 field:none]" media-ctl -v -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]" Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Adam Ford authored
There is a csi bridge and csis interface that tie together to allow csi2 capture. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
David Heidelberg authored
fsl,tmu-calibration is in u32-matrix. Use matching property syntax. No functional changes. Fixes warnings as: $ make dtbs_check ... arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dt.yaml: tmu@30260000: \ fsl,tmu-calibration:0: Additional items are not allowed (1, 41, 2, 47, \ 3, 53, 4, 61, 5, 67, 6, 75, 7, 81, 8, 87, 9, 95, 10, 103, 11, 111, 65536, \ 27, 65537, 35, 65538, 43, 65539, 51, 65540, 59, 65541, 67, 65542, 75, \ 65543, 85, 65544, 93, 65545, 103, 65546, 112, 131072, 23, 131073, 35, \ 131074, 45, 131075, 55, 131076, 65, 131077, 75, 131078, 87, 131079, 99, \ 131080, 111, 196608, 21, 196609, 33, 196610, 45, 196611, 57, 196612, 69, \ 196613, 83, 196614, 95, 196615, 113 were unexpected) From schema: Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml ... Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Kuldeep Singh authored
Enable CAN support for LX2162A-QDS in board dts. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 23 Nov, 2021 3 commits
-
-
Peng Fan authored
i.MX8QXP A35 Cluster has 32KB Icache, 32KB Dcache and 512KB L2 Cache - Icache is 2-way set associative - Dcache is 4-way set associative - L2cache is 8-way set associative - Line size are 64bytes Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
i.MX8QM A53 Cluster has 32KB Icache, 32KB Dcache and 1MB L2 Cache - Icache is 2-way set associative - Dcache is 4-way set associative - L2cache is 16-way set associative - Line size are 64bytes A72 Cluster has 48KB Icache, 32KB Dcache and 1MB L2 Cache - ICache is 3-way set-associative - Dcache is 2-way set-associative - L2Cache is 16-way set-associative - Line size are 64bytes Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Peng Fan authored
i.MX8M Family use A53 Cores and has 32KB ICache with 32KB DCache. - Icache is 2-way set associative - Dcache is 4-way set associative - L2cache is 16-way set associative - Line size are 64bytes Except i.MX8MQ has 1MB L2 Cache, others has 512KB L2 Cache. So add the cache info in device tree and let use could see that from /sys/devices/system/cpu/cpu[x]/cache/ Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 22 Nov, 2021 5 commits
-
-
Martin Kepplinger authored
The r3 and later revisions of the Librem 5 phone include an additional switch to control the hi846 XSHUTDOWN pin. Describe it. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Martin Kepplinger authored
Enable the CSI1 MIPI RX controller and CSI1 bridge on the SoC. Describe the Librem 5 front-facing camera, connected to the CSI1 MIPI. the following sets formats, streams 10 frames and saves one: #!/bin/bash WIDTH=1632 HEIGHT=1224 SKIP=10 media-ctl -d "platform:30a90000.csi" --set-v4l2 "'csi':0 [fmt:SGBRG10/${WIDTH}x${HEIGHT} colorspace:raw]" media-ctl -d "platform:30a90000.csi" --set-v4l2 "'imx8mq-mipi-csi2 30a70000.csi':0 [fmt:SGBRG10/${WIDTH}x${HEIGHT} colorspace:raw]" media-ctl -d "platform:30a90000.csi" --set-v4l2 "'hi846 2-0020':0 [fmt:SGBRG10/${WIDTH}x${HEIGHT} colorspace:raw]" media-ctl -d "platform:30a90000.csi" -l "'hi846 2-0020':0 -> 'imx8mq-mipi-csi2 30a70000.csi':0 [1]" v4l2-ctl -d "/dev/v4l/by-path/platform-30a90000.csi-video-index0" --set-fmt-video=width=${WIDTH},height=${HEIGHT},pixelformat=GB16 --stream-mmap --stream-to=$WIDTH.raw --stream-skip=$SKIP --stream-count=1 Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Martin Kepplinger authored
CAMERA_PWR_EN controls two different power supplies that cameras will use. The hardware killswitch controls a third one. Describe that appropriately. The pinctrl that describes the gpio that is used in 2 places here is added to the pmic. This is done because pmic is powered early enough to make sure this will work. When we would have put the same pinctrl property into the 2 regulator nodes (instead of the pmic), we'd get: imx8mq-pinctrl 30330000.pinctrl: pin MX8MQ_IOMUXC_GPIO1_IO00 already requested by regulator-csi-1v8; cannot claim for regulator-vcam-2v8 imx8mq-pinctrl 30330000.pinctrl: pin-10 (regulator-vcam-2v8) status -22 imx8mq-pinctrl 30330000.pinctrl: could not request pin 10 (MX8MQ_IOMUXC_GPIO1_IO00) from group camerapwrgrp on device 30330000.pinctrl Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Martin Kepplinger authored
The Librem 5 r3 ("Dogwood") and r4 ("Evergreen") revisions are quite similar. Add a shared imx8mq-librem5-r3.dtsi description to be included in r3 and later dts files in order to avoid duplication. This is no change in the descriptions but only refactoring. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Adam Ford authored
The i.MX8M Mini has two available USB controllers. On the imx8mm-beacon board, USB1 is routed to a mini-USB port with OTG functionality. USB2 is routed to a USB hub which has three host-only ports connected to it. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 21 Nov, 2021 3 commits
-
-
Meng Li authored
Based on commit d59c90a2("spi: spi-fsl-dspi: Convert TCFQ users to XSPI FIFO mode ") and 6c1c26ec("spi: spi-fsl-dspi: Accelerate transfers using larger word size if possible"), on ls1043a-rdb platform, the spi work mode is changed from TCFQ mode to XSPI mode. In order to keep the transmission sequence matches with flash device, it is need to add delay between CS and CLK signal. The strategy of generating delay value refers to QorIQ LS1043A Reference Manual. Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Geert Uytterhoeven authored
The wlf,wm8962 Device Tree bindings do not specify a clock-names property. Drop it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Arnaud Ferraris authored
A new 'chassis-type' root node property has recently been approved for the device-tree specification, in order to provide a simple way for userspace to detect the device form factor and adjust their behavior accordingly. This patch fills in this property for end-user devices (such as laptops, smartphones and tablets) based on NXP ARM64 processors. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 14 Nov, 2021 15 commits
-
-
Linus Torvalds authored
-
Gustavo A. R. Silva authored
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs cleanups from Darrick Wong: "The most 'exciting' aspect of this branch is that the xfsprogs maintainer and I have worked through the last of the code discrepancies between kernel and userspace libxfs such that there are no code differences between the two except for #includes. IOWs, diff suffices to demonstrate that the userspace tools behave the same as the kernel, and kernel-only bits are clearly marked in the /kernel/ source code instead of just the userspace source. Summary: - Clean up open-coded swap() calls. - A little bit of #ifdef golf to complete the reunification of the kernel and userspace libxfs source code" * tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: sync xfs_btree_split macros with userspace libxfs xfs: #ifdef out perag code for userspace xfs: use swap() to make dabtree code cleaner
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc fixes from Helge Deller: "Fix a build error in stracktrace.c, fix resolving of addresses to function names in backtraces, fix single-stepping in assembly code and flush userspace pte's when using set_pte_at()" * tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/entry: fix trace test in syscall exit path parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page parisc: Fix implicit declaration of function '__kernel_text_address' parisc: Fix backtrace to always include init funtion names
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker. * tag 'sh-for-5.16' of git://git.libc.org/linux-sh: sh: pgtable-3level: Fix cast to pointer from integer of different size sh: fix READ/WRITE redefinition warnings sh: define __BIG_ENDIAN for math-emu sh: math-emu: drop unused functions sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: Cleanup about SPARSE_IRQ sh: kdump: add some attribute to function maple: fix wrong return value of maple_bus_init(). sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/ sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y sh: boards: Fix the cacography in irq.c sh: check return code of request_irq sh: fix trivial misannotations
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap()
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Two fixes due to DT node name changes on Arm, Ltd. boards - Treewide rename of Ingenic CGU headers - Update ST email addresses - Remove Netlogic DT bindings - Dropping few more cases of redundant 'maxItems' in schemas - Convert toshiba,tc358767 bridge binding to schema * tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: watchdog: sunxi: fix error in schema bindings: media: venus: Drop redundant maxItems for power-domain-names dt-bindings: Remove Netlogic bindings clk: versatile: clk-icst: Ensure clock names are unique of: Support using 'mask' in making device bus id dt-bindings: treewide: Update @st.com email address to @foss.st.com dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml dt-bindings: media: Update maintainers for st,stm32-cec.yaml dt-bindings: mfd: timers: Update maintainers for st,stm32-timers dt-bindings: timer: Update maintainers for st,stm32-timer dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix for POSIX CPU timers to address a problem where POSIX CPU timer delivery stops working for a new child task because copy_process() copies state information which is only valid for the parent task" * tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 static call update from Thomas Gleixner: "A single fix for static calls to make the trampoline patching more robust by placing explicit signature bytes after the call trampoline to prevent patching random other jumps like the CFI jump table entries" * tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call,x86: Robustify trampoline patching
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Avoid touching ~100 config files in order to be able to select the preemption model - clear cluster CPU masks too, on the CPU unplug path - prevent use-after-free in cfs - Prevent a race condition when updating CPU cache domains - Factor out common shared part of smp_prepare_cpus() into a common helper which can be called by both baremetal and Xen, in order to fix a booting of Xen PV guests * tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Restore preemption model selection configs arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology() sched/fair: Prevent dead task groups from regaining cfs_rq's sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() x86/smp: Factor out parts of native_smp_prepare_cpus()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Prevent unintentional page sharing by checking whether a page reference to a PMU samples page has been acquired properly before that - Make sure the LBR_SELECT MSR is saved/restored too - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any residual data left * tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Avoid put_page() when GUP fails perf/x86/vlbr: Add c->flags to vlbr event constraints perf/x86/lbr: Reset LBR_SELECT during vlbr reset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Add the model number of a new, Raptor Lake CPU, to intel-family.h - Do not log spurious corrected MCEs on SKL too, due to an erratum - Clarify the path of paravirt ops patches upstream - Add an optimization to avoid writing out AMX components to sigframes when former are in init state * tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Raptor Lake to Intel family x86/mce: Add errata workaround for Skylake SKX37 MAINTAINERS: Add some information to PARAVIRT_OPS entry x86/fpu: Optimize out sigframe xfeatures when in init state
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: "Hardware tracing: - ARM: * Print the size of the buffer size consistently in hexadecimal in ARM Coresight. * Add Coresight snapshot mode support. * Update --switch-events docs in 'perf record'. * Support hardware-based PID tracing. * Track task context switch for cpu-mode events. - Vendor events: * Add metric events JSON file for power10 platform perf test: - Get 'perf test' unit tests closer to kunit. - Topology tests improvements. - Remove bashisms from some tests. perf bench: - Fix memory leak of perf_cpu_map__new() in the futex benchmarks. libbpf: - Add some more weak libbpf functions o allow building with the libbpf versions, old ones, present in distros. libbeauty: - Translate [gs]setsockopt 'level' argument integer values to strings. tools headers UAPI: - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files with the kernel sources. Documentation: - Add documentation to 'struct symbol'. - Synchronize the definition of enum perf_hw_id with code in tools/perf/design.txt" * tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits) perf tests: Remove bash constructs from stat_all_pmu.sh perf tests: Remove bash construct from record+zstd_comp_decomp.sh perf test: Remove bash construct from stat_bpf_counters.sh test perf bench futex: Fix memory leak of perf_cpu_map__new() tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync sound/asound.h with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources perf tools: Add more weak libbpf functions perf bpf: Avoid memory leak from perf_env__insert_btf() perf symbols: Factor out annotation init/exit perf symbols: Bit pack to save a byte perf symbols: Add documentation to 'struct symbol' tools headers UAPI: Sync files changed by new futex_waitv syscall perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning perf arm-spe: Support hardware-based PID tracing perf arm-spe: Save context ID in record perf arm-spe: Update --switch-events docs in 'perf record' perf arm-spe: Track task context switch for cpu-mode events ...
-
Thomas Gleixner authored
Merge tag 'irqchip-fixes-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Address an issue with the SiFive PLIC being unable to EOI a masked interrupt - Move the disable/enable methods in the CSky mpintc to mask/unmask - Fix a regression in the OF irq code where an interrupt-controller property in the same node as an interrupt-map property would get ignored Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org
-
- 13 Nov, 2021 6 commits
-
-
git://github.com/terrelln/linuxLinus Torvalds authored
Pull zstd update from Nick Terrell: "Update to zstd-1.4.10. Add myself as the maintainer of zstd and update the zstd version in the kernel, which is now 4 years out of date, to a much more recent zstd release. This includes bug fixes, much more extensive fuzzing, and performance improvements. And generates the kernel zstd automatically from upstream zstd, so it is easier to keep the zstd verison up to date, and we don't fall so far out of date again. This includes 5 commits that update the zstd library version: - Adds a new kernel-style wrapper around zstd. This wrapper API is functionally equivalent to the subset of the current zstd API that is currently used. The wrapper API changes to be kernel style so that the symbols don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same API and preserves the semantics, so that none of the callers need to be updated. All callers are updated in the commit, because there are zero functional changes. - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't depend on the layout of `lib/zstd/` to include every source file. This allows the next patch to be automatically generated. - Imports the zstd-1.4.10 source code. This commit is automatically generated from upstream zstd (https://github.com/facebook/zstd). - Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`. - Fixes a newly added build warning for clang. The discussion around this patchset has been pretty long, so I've included a FAQ-style summary of the history of the patchset, and why we are taking this approach. Why do we need to update? ------------------------- The zstd version in the kernel is based off of zstd-1.3.1, which is was released August 20, 2017. Since then zstd has seen many bug fixes and performance improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to older versions. So the only way to sanely get these fixes is to keep up to date with upstream zstd. There are no known security issues that affect the kernel, but we need to be able to update in case there are. And while there are no known security issues, there are relevant bug fixes. For example the problem with large kernel decompression has been fixed upstream for over 2 years [1] Additionally the performance improvements for kernel use cases are significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz: - BtrFS zstd compression at levels 1 and 3 is 5% faster - BtrFS zstd decompression+read is 15% faster - SquashFS zstd decompression+read is 15% faster - F2FS zstd compression+write at level 3 is 8% faster - F2FS zstd decompression+read is 20% faster - ZRAM decompression+read is 30% faster - Kernel zstd decompression is 35% faster - Initramfs zstd decompression+build is 5% faster On top of this, there are significant performance improvements coming down the line in the next zstd release, and the new automated update patch generation will allow us to pull them easily. How is the update patch generated? ---------------------------------- The first two patches are preparation for updating the zstd version. Then the 3rd patch in the series imports upstream zstd into the kernel. This patch is automatically generated from upstream. A script makes the necessary changes and imports it into the kernel. The changes are: - Replace all libc dependencies with kernel replacements and rewrite includes. - Remove unncessary portability macros like: #if defined(_MSC_VER). - Use the kernel xxhash instead of bundling it. This automation gets tested every commit by upstream's continuous integration. When we cut a new zstd release, we will submit a patch to the kernel to update the zstd version in the kernel. The automated process makes it easy to keep the kernel version of zstd up to date. The current zstd in the kernel shares the guts of the code, but has a lot of API and minor changes to work in the kernel. This is because at the time upstream zstd was not ready to be used in the kernel envrionment as-is. But, since then upstream zstd has evolved to support being used in the kernel as-is. Why are we updating in one big patch? ------------------------------------- The 3rd patch in the series is very large. This is because it is restructuring the code, so it both deletes the existing zstd, and re-adds the new structure. Future updates will be directly proportional to the changes in upstream zstd since the last import. They will admittidly be large, as zstd is an actively developed project, and has hundreds of commits between every release. However, there is no other great alternative. One option ruled out is to replay every upstream zstd commit. This is not feasible for several reasons: - There are over 3500 upstream commits since the zstd version in the kernel. - The automation to automatically generate the kernel update was only added recently, so older commits cannot easily be imported. - Not every upstream zstd commit builds. - Only zstd releases are "supported", and individual commits may have bugs that were fixed before a release. Another option to reduce the patch size would be to first reorganize to the new file structure, and then apply the patch. However, the current kernel zstd is formatted with clang-format to be more "kernel-like". But, the new method imports zstd as-is, without additional formatting, to allow for closer correlation with upstream, and easier debugging. So the patch wouldn't be any smaller. It also doesn't make sense to import upstream zstd commit by commit going forward. Upstream zstd doesn't support production use cases running of the development branch. We have a lot of post-commit fuzzing that catches many bugs, so indiviudal commits may be buggy, but fixed before a release. So going forward, I intend to import every (important) zstd release into the Kernel. So, while it isn't ideal, updating in one big patch is the only patch I see forward. Who is responsible for this code? --------------------------------- I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree for zstd patches. Because of that, there were several patches that either got ignored, or took a long time to merge, since it wasn't clear which tree should pick them up. I'm officially stepping up as maintainer, and setting up my tree as the path through which zstd patches get merged. I'll make sure that patches to the kernel zstd get ported upstream, so they aren't erased when the next version update happens. How is this code tested? ------------------------ I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both performance and correctness. Also, thanks to many people in the community who have tested these patches locally. Lastly, this code will bake in linux-next before being merged into v5.16. Why update to zstd-1.4.10 when zstd-1.5.0 has been released? ------------------------------------------------------------ This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest release when it was created. Since the update patch is automatically generated from upstream, I could generate it from zstd-1.5.0. However, there were some large stack usage regressions in zstd-1.5.0, and are only fixed in the latest development branch. And the latest development branch contains some new code that needs to bake in the fuzzer before I would feel comfortable releasing to the kernel. Once this patchset has been merged, and we've released zstd-1.5.1, we can update the kernel to zstd-1.5.1, and exercise the update process. You may notice that zstd-1.4.10 doesn't exist upstream. This release is an artifical release based off of zstd-1.4.9, with some fixes for the kernel backported from the development branch. I will tag the zstd-1.4.10 release after this patchset is merged, so the Linux Kernel is running a known version of zstd that can be debugged upstream. Why was a wrapper API added? ---------------------------- The first versions of this patchset migrated the kernel to the upstream zstd API. It first added a shim API that supported the new upstream API with the old code, then updated callers to use the new shim API, then transitioned to the new code and deleted the shim API. However, Cristoph Hellwig suggested that we transition to a kernel style API, and hide zstd's upstream API behind that. This is because zstd's upstream API is supports many other use cases, and does not follow the kernel style guide, while the kernel API is focused on the kernel's use cases, and follows the kernel style guide. Where is the previous discussion? --------------------------------- Links for the discussions of the previous versions of the patch set below. The largest changes in the design of the patchset are driven by the discussions in v11, v5, and v1. Sorry for the mix of links, I couldn't find most of the the threads on lkml.org" Link: https://lkml.org/lkml/2020/9/29/27 [1] Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12] Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11] Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10] Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9] Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8] Link: https://lkml.org/lkml/2020/12/3/1195 [v7] Link: https://lkml.org/lkml/2020/12/2/1245 [v6] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5] Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4] Link: https://lkml.org/lkml/2020/9/23/1074 [v3] Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1] Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> * tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux: lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical MAINTAINERS: Add maintainer entry for zstd lib: zstd: Upgrade to latest upstream zstd version 1.4.10 lib: zstd: Add decompress_sources.h for decompress_unzstd lib: zstd: Add kernel-specific API
-
git://github.com/davidhildenbrand/linuxLinus Torvalds authored
Pull virtio-mem update from David Hildenbrand: "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem, now that "accidential" access to logically unplugged memory inside added Linux memory blocks is no longer possible, because we: - Removed /dev/kmem in commit bbcd53c9 ("drivers/char: remove /dev/kmem for good") - Disallowed access to virtio-mem device memory via /dev/mem in commit 2128f4e2 ("virtio-mem: disallow mapping virtio-mem memory via /dev/mem") - Sanitized access to virtio-mem device memory via /proc/kcore in commit 0daa322b ("fs/proc/kcore: don't read offline sections, logically offline pages and hwpoisoned pages") - Sanitized access to virtio-mem device memory via /proc/vmcore in commit ce281462 ("virtio-mem: kdump mode to sanitize /proc/vmcore access") The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be required by some hypervisors implementing virtio-mem in the near future, so let's support it now that we safely can" * tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux: virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
-
James Clark authored
The tests were passing but without testing and were printing the following: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 51650 Testing cpu/branch-instructions/ ./tests/shell/stat_all_pmu.sh: 10: [: Performance counter stats for 'true': 137,307 cpu/branch-instructions/ 0.001686672 seconds time elapsed 0.001376000 seconds user 0.000000000 seconds sys: unexpected operator Changing the regexes to a grep works in sh and prints this: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 60186 [...] Testing tlb_flush.stlb_any test child finished with 0 ---- end ---- perf all PMU test: Ok Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
James Clark authored
Commit 463538a3 ("perf tests: Fix test 68 zstd compression for s390") inadvertently removed the -g flag from all platforms rather than just s390, because the [[ ]] construct fails in sh. Changing to single brackets restores testing of call graphs and removes the following error from the output: $ ./perf test -v 85 85: Zstd perf.data compression/decompression : --- start --- test child forked, pid 50643 Collecting compressed record file: ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found Fixes: 463538a3 ("perf tests: Fix test 68 zstd compression for s390") Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
James Clark authored
Currently the test skips with an error because == only works in bash: $ ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 44586 ./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Changing == to = does the same thing, but doesn't result in an error: ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 45833 Skipping: --bpf-counters not supported Error: unknown option `bpf-counters' [...] test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Sohaib Mohamed authored
ASan reports memory leaks while running: $ sudo ./perf bench futex all The leaks are caused by perf_cpu_map__new not being freed. This patch adds the missing perf_cpu_map__put since it calls cpu_map_delete implicitly. Fixes: 9c3516d1 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions") Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-