- 16 Jul, 2012 4 commits
-
-
Thomas Gleixner authored
The leap second rework unearthed another issue of inconsistent data. On timekeeping_resume() the timekeeper data is updated, but nothing calls timekeeping_update(), so now the update code in the timer interrupt sees stale values. This has been the case before those changes, but then the timer interrupt was using stale data as well so this went unnoticed for quite some time. Add the missing update call, so all the data is consistent everywhere. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl> Reported-and-tested-by: Martin Steigerwald <Martin@lichtvoll.de> Cc: LKML <linux-kernel@vger.kernel.org> Cc: Linux PM list <linux-pm@vger.kernel.org> Cc: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>, Cc: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform tree fixes from Matthew Garrett: "Small fixes to a couple of drivers plus a slightly larger number for sony-laptop that the maintainer thinks are appropriate, most of which fix problems with the earlier 3.5 updates. These have been in -next for a while without complaint." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: intel_ips: blacklist HP ProBook laptops ideapad: uninitialized data in ideapad_acpi_add() sony-laptop: correct find_snc_handle failure checks sony-laptop: fix a couple signedness bugs sony-laptop: fix sony_nc_sysfs_store() sony-laptop: input initialization should be done before SNC sony-laptop: add lid backlight support for handle 0x143 sony-laptop: store battery care limits on batteries sony-laptop: notify userspace of GFX switch position changes sony-laptop: use an enum for SNC event types
-
Anders Kaseorg authored
If a parent and child process open the two ends of a fifo, and the child immediately exits, the parent may receive a SIGCHLD before its open() returns. In that case, we need to make sure that open() will return successfully after the SIGCHLD handler returns, instead of throwing EINTR or being restarted. Otherwise, the restarted open() would incorrectly wait for a second partner on the other end. The following test demonstrates the EINTR that was wrongly thrown from the parent’s open(). Change .sa_flags = 0 to .sa_flags = SA_RESTART to see a deadlock instead, in which the restarted open() waits for a second reader that will never come. (On my systems, this happens pretty reliably within about 5 to 500 iterations. Others report that it manages to loop ~forever sometimes; YMMV.) #include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define CHECK(x) do if ((x) == -1) {perror(#x); abort();} while(0) void handler(int signum) {} int main() { struct sigaction act = {.sa_handler = handler, .sa_flags = 0}; CHECK(sigaction(SIGCHLD, &act, NULL)); CHECK(mknod("fifo", S_IFIFO | S_IRWXU, 0)); for (;;) { int fd; pid_t pid; putc('.', stderr); CHECK(pid = fork()); if (pid == 0) { CHECK(fd = open("fifo", O_RDONLY)); _exit(0); } CHECK(fd = open("fifo", O_WRONLY)); CHECK(close(fd)); CHECK(waitpid(pid, NULL, 0)); } } This is what I suspect was causing the Git test suite to fail in t9010-svn-fe.sh: http://bugs.debian.org/678852Signed-off-by: Anders Kaseorg <andersk@mit.edu> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'fixes-for-v3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull late pinctrl fixes from Linus Walleij: - Two fixes to the i.MX driver * tag 'fixes-for-v3.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pinctrl-imx6q: add missed mux function for USBOTG_ID pinctrl: pinctrl-imx: only print debug message when DEBUG is defined
-
- 14 Jul, 2012 13 commits
-
-
Linus Torvalds authored
-
Silva Paulo authored
The idr_pre_get() function never returns a value < 0. It returns 0 (no memory) or 1 (OK). Reported-by: Silva Paulo <psdasilva@yahoo.com> [ Rewrote Silva's patch, but attributing it to Silva anyway - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dong Aisheng authored
The original pin registers table is derived from u-boot mainline, but somehow it was found missing some mux functions for USBOTG_ID. We added it at the bottom by following the exist pin function ids, then it will not break the exist using of pin function id in dts file. Reported-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
-
Dong Aisheng authored
Fix regression for commit 3a86a5f8 (pinctrl: pinctrl-imx: free allocated pinctrl_map structure only once and use kernel facilities for IMX_PMX_DUMP) introduced in 3.5-rc3. With above commit, the debug code will alway be excuted. Change to excute it only when DEBUG is defined. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Containing the regression fixes for USB-audio due to the transition to the new streaming logic, mostly found on Logitech webcams." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb: move calls to usb_set_interface ALSA: usb-audio: Fix the first PCM interface assignment
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull ACPI patch from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPICA: Fix possible fault in return package object repair code
-
Will Drewry authored
vsyscall_seccomp introduced a dependency on __secure_computing. On configurations with CONFIG_SECCOMP disabled, compilation will fail. Reported-by: feng xiangjun <fengxj325@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull cpufreq fix from Rafael Wysocki: "This fixes a regression preventing the ACPI cpufreq driver from loading on some systems where it worked previously without any problems." * tag 'cpufreq-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq / ACPI: Fix not loading acpi-cpufreq driver regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM Samsung SoC fixes from Arnd Bergmann. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C24XX: Correct CAMIF interrupt definitions ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 ARM: SAMSUNG: fix race in s3c_adc_start for ADC ARM: SAMSUNG: Update default rate for xusbxti clock ARM: EXYNOS: register devices in 'need_restore' state for pm_domains ARM: EXYNOS: read initial state of power domain from hw registers
-
Linus Torvalds authored
Merge branches 'core-urgent-for-linus', 'perf-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU, perf, and scheduler fixes from Ingo Molnar. The RCU fix is a revert for an optimization that could cause deadlocks. One of the scheduler commits (164c33c6 "sched: Fix fork() error path to not crash") is correct but not complete (some architectures like Tile are not covered yet) - the resulting additional fixes are still WIP and Ingo did not want to delay these pending fixes. See this thread on lkml: [PATCH] fork: fix error handling in dup_task() The perf fixes are just trivial oneliners. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf kvm: Fix segfault with report and mixed guestmount use perf kvm: Fix regression with guest machine creation perf script: Fix format regression due to libtraceevent merge ring-buffer: Fix accounting of entries when removing pages ring-buffer: Fix crash due to uninitialized new_pages list head * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS/sched: Update scheduler file pattern sched/nohz: Rewrite and fix load-avg computation -- again sched: Fix fork() error path to not crash
-
Bob Moore authored
Fixes a problem that can occur when a lone package object is wrapped with an outer package object in order to conform to the ACPI specification. Can affect these predefined names: _ALR,_MLS,_PSS,_TRT,_TSS,_PRT,_HPX,_DLM,_CSD,_PSD,_TSD https://bugzilla.kernel.org/show_bug.cgi?id=44171 This problem was introduced in 3.4-rc1 by commit 6a99b1c9 (ACPICA: Object repair code: Support to add Package wrappers) Reported-by: Vlastimil Babka <caster@gentoo.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: <stable@vger.kernel.org> # 3.4 Signed-off-by: Len Brown <len.brown@intel.com>
-
Arnd Bergmann authored
Merge branch 'v3.5-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: * 'v3.5-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C24XX: Correct CAMIF interrupt definitions ARM: S3C24XX: Correct AC97 clock control bit for S3C2440 ARM: SAMSUNG: fix race in s3c_adc_start for ADC ARM: SAMSUNG: Update default rate for xusbxti clock ARM: EXYNOS: register devices in 'need_restore' state for pm_domains ARM: EXYNOS: read initial state of power domain from hw registers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
git://neil.brown.name/mdLinus Torvalds authored
Pull use-after-free RAID1 bugfix from NeilBrown. * tag 'md-3.5-fixes' of git://neil.brown.name/md: md/raid1: fix use-after-free bug in RAID1 data-check code.
-
- 13 Jul, 2012 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull the leap second fixes from Thomas Gleixner: "It's a rather large series, but well discussed, refined and reviewed. It got a massive testing by John, Prarit and tip. In theory we could split it into two parts. The first two patches f55a6faa: hrtimer: Provide clock_was_set_delayed() 4873fa07: timekeeping: Fix leapsecond triggered load spike issue are merely preventing the stuff loops forever issues, which people have observed. But there is no point in delaying the other 4 commits which achieve full correctness into 3.6 as they are tagged for stable anyway. And I rather prefer to have the full fixes merged in bulk than a "prevent the observable wreckage and deal with the hidden fallout later" approach." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Update hrtimer base offsets each hrtimer_interrupt timekeeping: Provide hrtimer update function hrtimers: Move lock held region in hrtimer_interrupt() timekeeping: Maintain ktime_t based offsets for hrtimers timekeeping: Fix leapsecond triggered load spike issue hrtimer: Provide clock_was_set_delayed()
-
Will Drewry authored
If a seccomp filter program is installed, older static binaries and distributions with older libc implementations (glibc 2.13 and earlier) that rely on vsyscall use will be terminated regardless of the filter program policy when executing time, gettimeofday, or getcpu. This is only the case when vsyscall emulation is in use (vsyscall=emulate is the default). This patch emulates system call entry inside a vsyscall=emulate by populating regs->ax and regs->orig_ax with the system call number prior to calling into seccomp such that all seccomp-dependencies function normally. Additionally, system call return behavior is emulated in line with other vsyscall entrypoints for the trace/trap cases. [ v2: fixed ip and sp on SECCOMP_RET_TRAP/TRACE (thanks to luto@mit.edu) ] Reported-and-tested-by: Owen Kibel <qmewlo@gmail.com> Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
Please pull one hwmon subsystem fix from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (it87) Preserve configuration register bits on init
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: - Fix an NFSv4 mount regression - Fix O_DIRECT list manipulation snafus * tag 'nfs-for-3.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix an NFSv4 mount regression NFS: Fix list manipulation snafus in fs/nfs/direct.c
-
Dave Jones authored
This can be trivially triggered from userspace by passing in something unexpected. kernel BUG at fs/locks.c:1468! invalid opcode: 0000 [#1] SMP RIP: 0010:generic_setlease+0xc2/0x100 Call Trace: __vfs_setlease+0x35/0x40 fcntl_setlease+0x76/0x150 sys_fcntl+0x1c6/0x810 system_call_fastpath+0x1a/0x1f Signed-off-by: Dave Jones <davej@redhat.com> Cc: stable@kernel.org # 3.2+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer fixes from Dmitry Torokhov: "The changes are limited to adding new VID/PID combinations to drivers to enable support for new versions of hardware, most notably hardware found in new MacBook Pro Retina boxes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Andamiro Pump It Up pad Input: xpad - add signature for Razer Onza Tournament Edition Input: xpad - handle all variations of Mad Catz Beat Pad Input: bcm5974 - Add support for 2012 MacBook Pro Retina HID: add support for 2012 MacBook Pro Retina
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - Some regression fixes at the audio part for devices with cx23885/cx25840 - A DMA corruption fix at cx231xx - two fixes at the winbond IR driver - Several fixes for the EXYNOS media driver (s5p) - two fixes at the OMAP3 preview driver - one fix at the dvb core failure path - an include missing (slab.h) at smiapp-core causing compilation breakage - em28xx was not loading the IR driver driver anymore. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (31 commits) [media] Revert "[media] V4L: JPEG class documentation corrections" [media] s5p-fimc: Add missing FIMC-LITE file operations locking [media] omap3isp: preview: Fix contrast and brightness handling [media] omap3isp: preview: Fix output size computation depending on input format [media] winbond-cir: Initialise timeout, driver_type and allowed_protos [media] winbond-cir: Fix txandrx module info [media] cx23885: Silence unknown command warnings [media] cx23885: add support for HVR-1255 analog (cx23888 variant) [media] cx23885: make analog support work for HVR_1250 (cx23885 variant) [media] cx25840: fix vsrc/hsrc usage on cx23888 designs [media] cx25840: fix regression in HVR-1800 analog audio [media] cx25840: fix regression in analog support hue/saturation controls [media] cx25840: fix regression in HVR-1800 analog support [media] s5p-mfc: Fixed setup of custom controls in decoder and encoder [media] cx231xx: don't DMA to random addresses [media] em28xx: fix em28xx-rc load [media] dvb-core: Release semaphore on error path dvb_register_device() [media] s5p-fimc: Stop media entity pipeline if fimc_pipeline_validate fails [media] s5p-fimc: Fix compiler warning in fimc-lite.c [media] s5p-fimc: media_entity_pipeline_start() may fail ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
Pull MMC fixes from Chris Ball: - Revert a patch that made failing to select power class fatal; it turns out that it fails non-fatally on Tegra boards. Regression against 3.5-rc1. - Add the IRQF_ONESHOT flag to the cd-gpio driver, which turned into a regression in 3.5-rc1 when IRQF_ONESHOT became required for threaded IRQs with no handler. * tag 'mmc-fixes-for-3.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: cd-gpio: pass IRQF_ONESHOT to request_threaded_irq() mmc: core: Revert "skip card initialization if power class selection fails"
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull late MTD fixes from David Woodhouse: - fix 'sparse warning fix' regression which totally breaks MXC NAND - fix GPMI NAND regression when used with UBI - update/correct sysfs documentation for new 'bitflip_threshold' field - fix nandsim build failure * tag 'for-linus-20120712' of git://git.infradead.org/linux-mtd: mtd: nandsim: don't open code a do_div helper mtd: ABI documentation: clarification of bitflip_threshold mtd: gpmi-nand: fix read page when reading to vmalloced area mtd: mxc_nand: use 32bit copy functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
Pull MFD Fixes from Samuel Ortiz: - Three Palmas fixes, One of them being a build error fix. - Two mc13xx fixes. One for fixing an SPI regmap configuration and another one for working around an i.Mx hardware bug. - One omap-usb regression fix. - One twl6040 build breakage fix. - One file deletion (ab5500-core.h) that was overlooked during the last merge window. * tag 'mfd-for-linus-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Add missing hunk to change palmas irq to clear on read mfd: Fix palmas regulator pdata missing mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues. mfd: Update twl6040 Kconfig to avoid build breakage mfd: Delete ab5500-core.h mfd: mc13xxx workaround SPI hardware bug on i.Mx mfd: Fix mc13xxx SPI regmap mfd: Add terminating entry for i2c_device_id palmas table
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: SH: Convert out[bwl] macros to inline functions sh: Fix up se7721 GPIOLIB=y build warnings.
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull a couple of KVM fixes from Avi Kivity: "One is an adjustment for an irq layer change that affected device assignment, the other a one-liner ppc fix." * git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm: Fix "PR" KVM implementation of H_CEDE KVM: Fix device assignment threaded irq handler
-
Jeff Moyer authored
Commit 080399aa ("block: don't mark buffers beyond end of disk as mapped") exposed a bug in __getblk_slow that causes mount to hang as it loops infinitely waiting for a buffer that lies beyond the end of the disk to become uptodate. The problem was initially reported by Torsten Hilbrich here: https://lkml.org/lkml/2012/6/18/54 and also reported independently here: http://www.sysresccd.org/forums/viewtopic.php?f=13&t=4511 and then Richard W.M. Jones and Marcos Mello noted a few separate bugzillas also associated with the same issue. This patch has been confirmed to fix: https://bugzilla.redhat.com/show_bug.cgi?id=835019 The main problem is here, in __getblk_slow: for (;;) { struct buffer_head * bh; int ret; bh = __find_get_block(bdev, block, size); if (bh) return bh; ret = grow_buffers(bdev, block, size); if (ret < 0) return NULL; if (ret == 0) free_more_memory(); } __find_get_block does not find the block, since it will not be marked as mapped, and so grow_buffers is called to fill in the buffers for the associated page. I believe the for (;;) loop is there primarily to retry in the case of memory pressure keeping grow_buffers from succeeding. However, we also continue to loop for other cases, like the block lying beond the end of the disk. So, the fix I came up with is to only loop when grow_buffers fails due to memory allocation issues (return value of 0). The attached patch was tested by myself, Torsten, and Rich, and was found to resolve the problem in call cases. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Reported-and-Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Josh Boyer <jwboyer@redhat.com> Cc: Stable <stable@vger.kernel.org> # 3.0+ [ Jens is on vacation, taking this directly - Linus ] -- Stable Notes: this patch requires backport to 3.0, 3.2 and 3.3. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sylwester Nawrocki authored
Properly define the CAMIF interrupt resources. This device have two interrupts - corresponding to the "codec" and "preview" data paths. IRQ_CAM is handled internally by the architecture and demultiplexed to IRQ_S3C2440_CAM_C and IRQ_S3C2440_CAM_P - these interrupts only should be handled in the driver. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Sylwester Nawrocki authored
Use correct gate control bit for AC97 clock which is S3C2440_CLKCON_AC97, not S3C2440_CLKCON_CAMERA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Daniel Mack authored
The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams. Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Philipp Dreimann <philipp@dreimann.net> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Yuri Khan authored
I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by: Yuri Khan <yurivkhan@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Todd Poynor authored
Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Tushar Behera authored
The rate of xusbxti clock is set in individual machine files. The default value should be defined at the clock definition and individual machine files should modify it if required. Division by zero in kernel. [<c0011849>] (unwind_backtrace+0x1/0x9c) from [<c022c663>] (Ldiv0+0x9/0x12) [<c022c663>] (Ldiv0+0x9/0x12) from [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) [<c001a3c3>] (s3c_setrate_clksrc+0x33/0x78) from [<c0019e67>] (clk_set_rate+0x2f/0x78) Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 12 Jul, 2012 4 commits
-
-
Jean Delvare authored
We were accidentally losing one bit in the configuration register on device initialization. It was reported to freeze one specific system right away. Properly preserve all bits we don't explicitly want to change in order to prevent that. Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-
Thomas Renninger authored
Commit d640113f introduced a regression on SMP systems where the processor core with ACPI id zero is disabled (typically should be the case because of hyperthreading). The regression got spread through stable kernels. On 3.0.X it got introduced via 3.0.18. Such platforms may be rare, but do exist. Look out for a disabled processor with acpi_id 0 in dmesg: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] disabled) This problem has been observed on a: HP Proliant BL280c G6 blade This patch restricts the introduced workaround to platforms with nr_cpu_ids <= 1. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Marek Szyprowski authored
Commit ca1d72f0 ('PM / Domains: Make it possible to add devices to inactive domains') introduced possibility to add devices to inactive power domains and added pm_genpd_dev_need_restore() function which lets platform core to notify power domain core that the specified device must be restored (with its runtime_resume() callback) before first use. This patch adds the pm_genpd_dev_need_restore() call what brings back the suspend/resume behaviour for the client devices known from the previous power domain driver (removed by commit 91cfbd4e - 'ARM: EXYNOS: Hook up power domains to generic power domain infrastructure'). Client device drivers relay on that suspend/resume behaviour, thus this patch fixes runtime pm operation for client devices. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Marek Szyprowski authored
Some bootloaders disable unused power domains to reduce power consuption. Power domain driver can easily read the actual state from the hardware registers instead of assuming that their initial state is always 'on'. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-