- 10 Oct, 2018 34 commits
-
-
Tony Lindgren authored
[ Upstream commit 4ec7cece ] Otherwise we can get: WARNING: CPU: 0 PID: 55 at drivers/net/wireless/ti/wlcore/io.h:84 I've only seen this few times with the runtime PM patches enabled so this one is probably not needed before that. This seems to work currently based on the current PM implementation timer. Let's apply this separately though in case others are hitting this issue. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[ Upstream commit ae636fb1 ] This is a static checker fix, not something I have tested. The issue is that on the second iteration through the loop, we jump forward by le32_to_cpu(auth_req->length) bytes. The problem is that if the length is more than "buflen" then we end up with a negative "buflen". A negative buflen is type promoted to a high positive value and the loop continues but it's accessing beyond the end of the buffer. I believe the "auth_req->length" comes from the firmware and if the firmware is malicious or buggy, you're already toasted so the impact of this bug is probably not very severe. Fixes: 030645ac ("rndis_wlan: handle 802.11 indications from device") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ben Greear authored
[ Upstream commit 168f75f1 ] While debugging driver crashes related to a buggy firmware crashing under load, I noticed that ath10k_htt_rx_ring_free could be called without being under lock. I'm not sure if this is the root cause of the crash or not, but it seems prudent to protect it. Originally tested on 4.16+ kernel with ath10k-ct 10.4 firmware running on 9984 NIC. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 1adca4b0 ] This patch can make audio controller in AMD Raven Ridge gets runtime suspended to D3, to save ~1W power when it's not in use. Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit e95d7c6e ] When dvb_register_adapter fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling dvb_register_adapter. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> [hans.verkuil@cisco.com: use pr_err and fix typo: adater -> adapter] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 85c634e9 ] When pcmcia_loop_config fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling pcmcia_loop_config. Signed-off-by:
-
Alistair Strachan authored
[ Upstream commit 8632c614 ] The ashmem driver did not check that the size/offset of the vma passed to its .mmap() function was not larger than the ashmem object being mapped. This could cause mmap() to succeed, even though accessing parts of the mapping would later fail with a segmentation fault. Ensure an error is returned by the ashmem_mmap() function if the vma size is larger than the ashmem object size. This enables safer handling of the problem in userspace. Cc: Todd Kjos <tkjos@android.com> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Cc: kernel-team@android.com Cc: Joel Fernandes <joel@joelfernandes.org> Signed-off-by:
Alistair Strachan <astrachan@google.com> Acked-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by:
Martijn Coenen <maco@android.com> Signed-off-by:
-
Javier Martinez Canillas authored
[ Upstream commit 2ec7debd ] The struct clk_init_data init variable is declared in the isp_xclk_init() function so is an automatic variable allocated in the stack. But it's not explicitly zero-initialized, so some init fields are left uninitialized. This causes the data structure to have undefined values that may confuse the common clock framework when the clock is registered. For example, the uninitialized .flags field could have the CLK_IS_CRITICAL bit set, causing the framework to wrongly prepare the clk on registration. This leads to the isp_xclk_prepare() callback being called, which in turn calls to the omap3isp_get() function that increments the isp dev refcount. Since this omap3isp_get() call is unexpected, this leads to an unbalanced omap3isp_get() call that prevents the requested IRQ to be later enabled, due the refcount not being 0 when the correct omap3isp_get() call happens. Fixes: 9b28ee3c ("[media] omap3isp: Use the common clock framework") Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit 22216ec4 ] The banding filter ON/OFF is controlled via bit 5 of COM8 register. It is attempted to be enabled in ov772x_set_params() by the following line. ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1); But this unexpectedly results disabling the banding filter, because the mask and set bits are exclusive. On the other hand, ov772x_s_ctrl() correctly sets the bit by: ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF); The same fix was already applied to non-soc_camera version of ov772x driver in the commit commit a024ee14 ("media: ov772x: correct setting of banding filter") Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit 30ed2b83 ] When the subdevice doesn't provide s_power core ops callback, the v4l2_subdev_call for s_power returns -ENOIOCTLCMD. If the subdevice doesn't have the special handling for its power saving mode, the s_power isn't required. So -ENOIOCTLCMD from the v4l2_subdev_call should be ignored. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit 222bce5e ] Both calls to of_find_node_by_name() and of_get_next_child() return a node pointer with refcount incremented thus it must be explicidly decremented here after the last usage. As we are assured to have a refcounted np either from the initial of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np) in the while loop if we reached the error code path below, an x of_node_put(np) is needed. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: commit f3d9478b ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit 6b2ddf33 ] arch/s390/mm/extmem.c: In function '__segment_load': arch/s390/mm/extmem.c:436:2: warning: 'strncat' specified bound 7 equals source length [-Wstringop-overflow=] strncat(seg->res_name, " (DCSS)", 7); What gcc complains about here is the misuse of strncat function, which in this case does not limit a number of bytes taken from "src", so it is in the end the same as strcat(seg->res_name, " (DCSS)"); Keeping in mind that a res_name is 15 bytes, strncat in this case would overflow the buffer and write 0 into alignment byte between the fields in the struct. To avoid that increasing res_name size to 16, and reusing strlcat. Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 5f936e19 ] Air Icy reported: UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7 signed integer overflow: 1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int' Call Trace: alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811 __do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline] __se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline] __x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213 do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290 alarm_timer_nsleep() uses ktime_add() to add the current time and the relative expiry value. ktime_add() has no sanity checks so the addition can overflow when the relative timeout is large enough. Use ktime_add_safe() which has the necessary sanity checks in place and limits the result to the valid range. Fixes: 9a7adcf5 ("timers: Posix interface for alarm-timers") Reported-by:
Team OWL337 <icytxw@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linutronix.deSigned-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit d3d4ffaa ] We use PHB in mode1 which uses bit 59 to select a correct DMA window. However there is mode2 which uses bits 59:55 and allows up to 32 DMA windows per a PE. Even though documentation does not clearly specify that, it seems that the actual hardware does not support bits 59:55 even in mode1, in other words we can create a window as big as 1<<58 but DMA simply won't work. This reduces the upper limit from 59 to 55 bits to let the userspace know about the hardware limits. Fixes: 7aafac11 "powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested" Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit d3ac5598 ] Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. usb_get_descriptor can return a negative error code. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ int x; expression e,e1; identifier f; @@ *x = f(...); ... when != x = e1 when != if (x < 0 || ...) { ... return ...; } *x < sizeof(e) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Breno Leitao authored
[ Upstream commit 1262dc09 ] Currently an open firmware property is copied into partition_name variable without keeping a room for \0. Later one, this variable (partition_name), which is 97 bytes long, is strncpyed into ibmvcsci_host_data->madapter_info->partition_name, which is 96 bytes long, possibly truncating it 'again' and removing the \0. This patch simply decreases the partition name to 96 and just copy using strlcpy() which guarantees that the string is \0 terminated. I think there is no issue if this there is a truncation in this very first copy, i.e, when the open firmware property is read and copied into the driver for the very first time; This issue also causes the following warning on GCC 8: drivers/scsi/ibmvscsi/ibmvscsi.c:281:2: warning: strncpy output may be truncated copying 96 bytes from a string of length 96 [-Wstringop-truncation] ... inlined from ibmvscsi_probe at drivers/scsi/ibmvscsi/ibmvscsi.c:2221:7: drivers/scsi/ibmvscsi/ibmvscsi.c:265:3: warning: strncpy specified bound 97 equals destination size [-Wstringop-truncation] CC: Bart Van Assche <bart.vanassche@wdc.com> CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Breno Leitao <leitao@debian.org> Acked-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 624fa779 ] In the scsi_transport_srp implementation it cannot be avoided to iterate over a klist from atomic context when using the legacy block layer instead of blk-mq. Hence this patch that makes it safe to use klists in atomic context. This patch avoids that lockdep reports the following: WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&k->k_lock)->rlock); local_irq_disable(); lock(&(&q->__queue_lock)->rlock); lock(&(&k->k_lock)->rlock); <Interrupt> lock(&(&q->__queue_lock)->rlock); stack backtrace: Workqueue: kblockd blk_timeout_work Call Trace: dump_stack+0xa4/0xf5 check_usage+0x6e6/0x700 __lock_acquire+0x185d/0x1b50 lock_acquire+0xd2/0x260 _raw_spin_lock+0x32/0x50 klist_next+0x47/0x190 device_for_each_child+0x8e/0x100 srp_timed_out+0xaf/0x1d0 [scsi_transport_srp] scsi_times_out+0xd4/0x410 [scsi_mod] blk_rq_timed_out+0x36/0x70 blk_timeout_work+0x1b5/0x220 process_one_work+0x4fe/0xad0 worker_thread+0x63/0x5a0 kthread+0x1c1/0x1e0 ret_from_fork+0x24/0x30 See also commit c9ddf734 ("scsi: scsi_transport_srp: Fix shost to rport translation"). Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <jejb@linux.vnet.ibm.com> Acked-by:
-
Bart Van Assche authored
[ Upstream commit 35bea5c8 ] Fixes: e48354ce ("iscsi-target: Add iSCSI fabric support for target v4.1") Signed-off-by:
Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Jan Beulich authored
[ Upstream commit 6709812f ] Sadly, other than claimed in: a368d7fd ("x86/entry/64: Add instruction suffix") ... there are two more instances which want to be adjusted. As said there, omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the other missing suffixes here as well. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5B3A02DD02000078001CFB78@prv1-mh.provo.novell.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit dbd0fbc7 ] Add a missing header otherwise compiler warns about missed prototype: CC arch/x86/kernel/tsc_msr.o arch/x86/kernel/tsc_msr.c:73:15: warning: no previous prototype for ‘cpu_khz_from_msr’ [-Wmissing-prototypes] unsigned long cpu_khz_from_msr(void) ^~~~~~~~~~~~~~~~ Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 662a99e1 ] viu_of_probe() ignores fails in i2c_get_adapter(), tries to unlock uninitialized mutex on error path. The patch streamlining the error handling in viu_of_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hari Bathini authored
[ Upstream commit 8950329c ] Memory reservation for crashkernel could fail if there are holes around kdump kernel offset (128M). Fail gracefully in such cases and print an error message. Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Tested-by:
David Gibson <dgibson@redhat.com> Reviewed-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
-
Sylwester Nawrocki authored
[ Upstream commit 7c1b9a5a ] This patch fixes potential NULL pointer dereference as indicated by the following static checker warning: drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane() error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'. Fixes: 34947b8a: ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver") Reported-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Guoqing Jiang authored
[ Upstream commit 010228e4 ] When one node leaves cluster or stops the resyncing (resync or recovery) array, then other nodes need to call recover_bitmaps to continue the unfinished task. But we need to clear suspend_area later after other nodes copy the resync information to their bitmap (by call bitmap_copy_from_slot). Otherwise, all nodes could write to the suspend_area even the suspend_area is not handled by any node, because area_resyncing returns 0 at the beginning of raid1_write_request. Which means one node could write suspend_area while another node is resyncing the same area, then data could be inconsistent. So let's clear suspend_area later to avoid above issue with the protection of bm lock. Also it is straightforward to clear suspend_area after nodes have copied the resync info to bitmap. Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Michael Scott authored
[ Upstream commit 03bc05e1 ] After decompression of 6lowpan socket data, an IPv6 header is inserted before the existing socket payload. After this, we reset the network_header value of the skb to account for the difference in payload size from prior to decompression + the addition of the IPv6 header. However, we fail to reset the mac_header value. Leaving the mac_header value untouched here, can cause a calculation error in net/packet/af_packet.c packet_rcv() function when an AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan interface. On line 2088, the data pointer is moved backward by the value returned from skb_mac_header(). If skb->data is adjusted so that it is before the skb->head pointer (which can happen when an old value of mac_header is left in place) the kernel generates a panic in net/core/skbuff.c line 1717. This panic can be generated by BLE 6lowpan interfaces (such as bt0) and 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan sources for compression and decompression. Signed-off-by:
Michael Scott <michael@opensourcefoundries.com> Acked-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit a420b5d9 ] Make sure to return -EIO in case of a short modem-status read request. While at it, split the debug message to not include the (zeroed) transfer-buffer content in case of errors. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jian-Hong Pan authored
[ Upstream commit 45ae68b8 ] Without this patch we cannot turn on the Bluethooth adapter on HP 14-bs007la. T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b009 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 09bebb1a ] Vexpress platforms provide two different restart handlers: SYS_REBOOT that restart the entire system, while DB_RESET only restarts the daughter board containing the CPU. DB_RESET is overridden by SYS_REBOOT if it exists. notifier_chain_register used in register_restart_handler by design relies on notifiers to be registered once only, however vexpress restart notifier can get registered twice. When this happen it corrupts list of notifiers, as result some notifiers can be not called on proper event, traverse on list can be cycled forever, and second unregister can access already freed memory. So far, since this was the only restart handler in the system, no issue was observed even if the same notifier was registered twice. However commit 6c5c0d48 ("watchdog: sp805: add restart handler") added support for SP805 restart handlers and since the system under test contains two vexpress restart and two SP805 watchdog instances, it was observed that during the boot traversing the restart handler list looped forever as there's a cycle in that list resulting in boot hang. This patch fixes the issues by ensuring that the notifier is installed only once. Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Fixes: 46c99ac6 ("power/reset: vexpress: Register with kernel restart handler") Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 11b71782 ] hwarc_probe() allocates memory for hwarc, but does not free it if uwb_rc_add() or hwarc_get_version() fail. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit c5fae4f4 ] Currently the check on error return from the call to rtsx_write_register is checking the error status from the previous call. Fix this by adding in the missing assignment of retval. Detected by CoverityScan, CID#709877 Fixes: fa590c22 ("staging: rts5208: add support for rts5208 and rts5288") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dan Williams authored
[ Upstream commit 3b6c62f3 ] Without this change the distance table calculation for emulated nodes may use the wrong numa node and report an incorrect distance. Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/153089328103.27680.14778434392225818887.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit 7fb2fd4e ] The problem is that if get_user_pages_fast() fails and returns a negative error code, it gets type promoted to a high positive value and treated as a success. Fixes: 06164d2b ("VMCI: queue pairs implementation.") Signed-off-by:
-
Matt Ranostay authored
[ Upstream commit ce054546 ] ADC channel 0 photodiode detects both infrared + visible light, but ADC channel 1 just detects infrared. However, the latter is a bit more sensitive in that range so complete darkness or low light causes a error condition in which the chan0 - chan1 is negative that results in a -EAGAIN. This patch changes the resulting lux1_input sysfs attribute message from "Resource temporarily unavailable" to a user-grokable lux value of 0. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Stafford Horne authored
[ Upstream commit cefd769f ] As of GCC 9.0.0 the build is reporting warnings like: crypto/ablkcipher.c: In function ‘crypto_ablkcipher_report’: crypto/ablkcipher.c:374:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation] strncpy(rblkcipher.geniv, alg->cra_ablkcipher.geniv ?: "<default>", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(rblkcipher.geniv)); ~~~~~~~~~~~~~~~~~~~~~~~~~ This means the strnycpy might create a non null terminated string. Fix this by explicitly performing '\0' termination. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 29 Sep, 2018 6 commits
-
-
Greg Kroah-Hartman authored
-
Steve Wise authored
commit 308aa2b8 upstream. Once the qp has been flushed, it cannot be flushed again. The user qp flush logic wasn't enforcing it however. The bug can cause touch-after-free crashes like: Unable to handle kernel paging request for data at address 0x000001ec Faulting instruction address: 0xc008000016069100 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4] LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] Call Trace: [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] [c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4] [c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core] [c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core] [c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm] [c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm] [c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm] [c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm] [c000000000444da4] __fput+0xe4/0x2f0 So fix flush_qp() to only flush the wq once. Cc: stable@vger.kernel.org Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Roderick Colenbrander authored
commit de66a1a0 upstream. Add support for USB based DS4 dongle device, which allows connecting a DS4 through Bluetooth, but hides Bluetooth from the host system. Signed-off-by:
Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Roderick Colenbrander authored
commit cf1015d6 upstream. Support additional DS4 model. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Catalin Marinas authored
commit db3899a6 upstream. When a kernel is built with CONFIG_TRACE_IRQFLAGS the following warning is produced when entering userspace for the first time: WARNING: at /work/Linux/linux-2.6-aarch64/kernel/locking/lockdep.c:3519 Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc3+ #639 Hardware name: Juno (DT) task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000 PC is at check_flags.part.22+0x19c/0x1a8 LR is at check_flags.part.22+0x19c/0x1a8 pc : [<ffffffc0000fba6c>] lr : [<ffffffc0000fba6c>] pstate: 600001c5 sp : ffffffc9768abe10 x29: ffffffc9768abe10 x28: ffffffc9768a8000 x27: 0000000000000000 x26: 0000000000000001 x25: 00000000000000a6 x24: ffffffc00064be6c x23: ffffffc0009f249e x22: ffffffc9768a0000 x21: ffffffc97fea5480 x20: 00000000000001c0 x19: ffffffc00169a000 x18: 0000005558cc7b58 x17: 0000007fb78e3180 x16: 0000005558d2e238 x15: ffffffffffffffff x14: 0ffffffffffffffd x13: 0000000000000008 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: fefefefefefeff63 x9 : 7f7f7f7f7f7f7f7f x8 : 6e655f7371726964 x7 : 0000000000000001 x6 : ffffffc0001079c4 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc001698438 x2 : 0000000000000000 x1 : ffffffc9768a0000 x0 : 000000000000002e Call trace: [<ffffffc0000fba6c>] check_flags.part.22+0x19c/0x1a8 [<ffffffc0000fc440>] lock_is_held+0x80/0x98 [<ffffffc00064bafc>] __schedule+0x404/0x730 [<ffffffc00064be6c>] schedule+0x44/0xb8 [<ffffffc000085bb0>] ret_to_user+0x0/0x24 possible reason: unannotated irqs-off. irq event stamp: 502169 hardirqs last enabled at (502169): [<ffffffc000085a98>] el0_irq_naked+0x1c/0x24 hardirqs last disabled at (502167): [<ffffffc0000bb3bc>] __do_softirq+0x17c/0x298 softirqs last enabled at (502168): [<ffffffc0000bb43c>] __do_softirq+0x1fc/0x298 softirqs last disabled at (502143): [<ffffffc0000bb830>] irq_exit+0xa0/0xf0 This happens because we disable interrupts in ret_to_user before calling schedule() in work_resched. This patch adds the necessary trace_hardirqs_off annotation. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Li Dongyang authored
commit fe18d649 upstream. Marking mmp bh dirty before writing it will make writeback pick up mmp block later and submit a write, we don't want the duplicate write as kmmpd thread should have full control of reading and writing the mmp block. Another reason is we will also have random I/O error on the writeback request when blk integrity is enabled, because kmmpd could modify the content of the mmp block(e.g. setting new seq and time) while the mmp block is under I/O requested by writeback. Signed-off-by:
Li Dongyang <dongyangli@ddn.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Cc: stable@vger.kernel.org Signed-off-by:
-
