Merge series from Zhang Yi <zhangyi@everest-semi.com>:

We propose four patches to solve headphone detection and suspend issues.
And there are several registers that should be read-only registers. So
we create es8326_writeable_register, and set these registers to false.

ASoc: tas2781: Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s

Add name_prefix as the prefix name of firmwares and
kcontrol to support corresponding TAS2563/TAS2781s.
name_prefix is not mandatory.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240621132309.564-1-shenghao-ding@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is incorrect to request the input pin format of the destination widget
using the output pin index of the source module as the indexes are not
necessarily matching.
moduleA.out_pin1 can be connected to moduleB.in_pin0 for example.

Use the dst_queue_id to request the input format of the destination module.

This bug remained unnoticed likely because in nocodec topologies we don't
have process modules after a module copier, thus the pin/queue index is
ignored.
For the process module case, the code was likely have been tested in a
controlled way where all the pin/queue/format properties were present to
work.

Update the debug prints to have better information.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: stable@vger.kernel.org # v6.8+
Link: https://patch.msgid.link/20240624121519.91703-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There are two hardware connection methods for DMICs on the MT6358. In cases
where more than two DMICs are used, we need to time-multiplex these DMICs.
Therefore, we need to dynamically switch the modes of these DMICs based on
the actual usage scenarios.

            ---- DMIC1
AU_VIN0 ---
            ---- DMIC2

AU_VIN2 --- ----DMIC3

When we want to use DMIC1/2, configure it to one-wire mode. When we want to
use DMIC1/3, configure it to two-wire mode.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://patch.msgid.link/20240613020725.27874-1-jiaxin.yu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

We modified the regmap_config members to fix cach sync error.
There are several registers that should be read-only registers.
If these registers are written while synchronizing the register values,
the codec will enter an error state.So we create es8326_writeable_register,
and set these registers to false
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240624030607.4307-5-zhangyi@everest-semi.comSigned-off-by: Mark Brown <broonie@kernel.org>

Executing regcache_sync at initialization, we can hear a gentle pop
noise. So we created es8326_init for initialization instead of
executing es8326_resume
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240624030607.4307-4-zhangyi@everest-semi.comSigned-off-by: Mark Brown <broonie@kernel.org>

We modified the headphone detection setting to avoid an error button state
after codec resume from suspend state
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240624030607.4307-2-zhangyi@everest-semi.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Andrejs Cainikovs <andrejs.cainikovs@gmail.com>:

This change adds local MCLK handling, which would cover a case when a
reference audio clock is present in a system, but is not allowed to be
changed, see [1].

[1]: https://lore.kernel.org/all/ZfBdxrzX3EnPuGOn@ediswmail9.ad.cirrus.com/

Merge series from srinivas.kandagatla@linaro.org:

This patchset adds support for.
	1. parse Display Port module tokens from ASoC topology
	2. add support to DP/HDMI Jack events.
	3. fixes a typo in function name in sm8250

Verified these patches on X13s along with changes to tplg in
https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/tree/topic/x13s-dp?ref_type=heads
and ucm changes from https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/topic/x13s-dp

x1e80100 is verified by Krzysztof with his changes in tplg

https://git.codelinaro.org/linaro/qcomlt/audioreach-topology/-/merge_requests/7/commits

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:

Make few pointers in ASoC functions as pointers to const, so the code is
clearer to read, a bit safer and allows further constifications (e.g.
placing some data as rodata).

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

This is v3 patch-set for ak4619 driver.
It was created by Khanh, and I updated/adjusted to upstream.
It was tested on Renesas V4M GrayH

Link: https://lore.kernel.org/r/877ceotnrg.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87frtb3x4k.wl-kuninori.morimoto.gx@renesas.com

Merge series from Christian Hewitt <christianshewitt@gmail.com>:

Update bindings and add a driver compatible for the pcm5242
chip used on the Odroid HiFi-Shield2 i2c mezzanine board.

Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:

Set of simple cleanups from similar issues in all Qualcomm WCD93xx
codecs.

The first patch "ASoC: codecs: wcd-mbhc: Constify passed MBHC reg
fields" is a requirement for few others, but except this they are
independent.

Merge series from Neil Armstrong <neil.armstrong@linaro.org>:

Convert the text bindings of the Everest ES7241/ES7134/7144/7154 2 channels
I2S analog to digital converter to dt-schema.

Merge series from Ricard Wanderlof <ricard.wanderlof@axis.com>:

In some cases, depending on system design, the MICBIAS pins on the
chip are not needed as such, but a couple of extra GPIO pins would be
useful. This patch allows the MICBIAS pins to be configured in the
device tree as general purpose output pins, controlled via the GPIO
framework.

Owing to their originally intended purpose there are some limitations:
when the MICBIAS pins are deactivated, they will float, so will likely
need a pulldown in many applications. When activated, they will
assume the voltage specified by the micbias1-vg and micbias2-vg
properties, respectively, meaning that the resulting output voltage
will be 2.0 V, 2.5 V or AVDD .

Merge series from Paul Handrigan <paulha@opensource.cirrus.com>:

This patchset provides ASoC support for the latest family
of Cirrus Logic multichannel, high performance audio ADCs.
The devices that are supported are CS5302 (2 channel ADC),
CS5304 (4 channel ADC), and CS5308 (8 channel ADC).

Add ti,pcm5242 to the pcm512x driver file
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patch.msgid.link/20240622131245.2607533-2-christianshewitt@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a compatible string to enable support for the ti,pcm5242 DAC chip
in the pcm512x driver.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patch.msgid.link/20240622131245.2607533-3-christianshewitt@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for the cs530x family of high performance
ADCs.
Signed-off-by: Paul Handrigan <paulha@opensource.cirrus.com>
Link: https://patch.msgid.link/20240621151757.1661265-3-paulha@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the YAML DT bindings for the cs530x high performance
audio ADCs.
Signed-off-by: Paul Handrigan <paulha@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240621151757.1661265-2-paulha@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The value “-ENOMEM” was assigned to the local variable “ret”
in one if branch after a devm_kzalloc() call failed at the beginning.
This error code will trigger then a pcmdevice_remove() call with a passed
null pointer so that an undesirable dereference will be performed.
Thus return the appropriate error code directly.

Fixes: 1324eafd ("ASoc: PCM6240: Create PCM6240 Family driver code")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://patch.msgid.link/20240617020954.17252-1-hao.ge@linux.devSigned-off-by: Mark Brown <broonie@kernel.org>

ACP common dma driver has a buffer size and period size restriction
which should be 64 byte aligned. Add pcm constraints for the same.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-8-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

I2S clock generation registers should be programmed before starting the I2S
dma when I2S controller is programmed as clock master. Move i2s clock
generation register programming sequence prior to i2s dma start.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-7-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

ACP provides different IO configurations(ACP PDM, I2S and SoundWire).
I2S mclk should be programmed only when I2S configuration is selected and
I2S controller is programmed as clock master.
Modify the conditional check for programming i2s mclk.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-6-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove unused variables i2s_pin_cfg_offset and i2s_mode from acp_resource
structure entries.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-5-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

In acp_i2s_probe(), acp_base null check is verified.
As already acp_base null check will be verified in acp platform
driver probe sequence, additional NULL check in acp_i2s_probe() is not
needed. Remove acp_i2s_probe() function.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240617072844.871468-4-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

We need some of the AMD fixes as a base for new work.

priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.

fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.

Fixes: 708b4351 ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the text bindings of the Everest ES7134/7144/7154 2 channels
I2S analog to digital converter to dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20240620-topic-amlogic-upstream-bindings-convert-everest-v2-2-660985615522@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the text biddings for the Everest ES7241 2 channels I2S analog
to digital converter to dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20240620-topic-amlogic-upstream-bindings-convert-everest-v2-1-660985615522@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Many Sound yaml files doesn't have vender prefix on filename.
Add missing vender prefix for these files.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/87wmmkpi6w.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

chip->flag variable assignment will be skipped when acp platform device
creation is skipped. In this case chip>flag value will not be set.
chip->flag variable should be assigned along with other structure
variables for 'chip' structure. Move chip->flag variable assignment
prior to acp platform device creation.

Fixes: 3a94c8ad ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-3-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.

Fixes: b24484c1 ("ASoC: amd: acp: ACP code generic to support newer platforms")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-2-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

When acp platform device creation is skipped, chip->chip_pdev value will
remain NULL. Add NULL check for chip->chip_pdev structure in
snd_acp_resume() function to avoid null pointer dereference.

Fixes: 088a4098 ("ASoC: amd: acp: add pm ops support for acp pci driver")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

This is the initial i2s-based amplifier driver for rt1318.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/b3055442ce6d4994aa01aa1fad6ba1fe@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add Asahi Kasei ak4619 audio codec bindings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/87h6dpwxug.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for the Asahi Kasei AK4619 audio codec.

[Kuninori cleanuped and adjusted to upstream code]
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87iky5wxvr.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

IRQ lookup functions such as those in ACPI can return error values when
an IRQ is not defined. The i2c core driver converts the error codes to a
value of 0 and the SPI bus driver passes them unaltered to client device
drivers.

The cs35l56 driver should only accept positive non-zero values as IRQ
numbers.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: 8a731fd3 ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240617135338.82006-1-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Dell SKU 0C64 has a single rt1318 amplifier.
The prefix name of control still needs to be set rt1318-1 corresponding to UCM config.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240612075740.1678082-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver does not use few 'num_ports' in 'struct wcd939x_sdw_priv'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://msgid.link/r/20240612-asoc-wcd9xxx-wide-cleanups-v1-23-0d15885b2a06@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>