- 23 Jan, 2019 3 commits
-
-
Dmitry Safonov authored
commit cf62a1a1 upstream. As notted by Jiri, tty_ldisc_reinit() shouldn't rely on tty counter. Simplify math by increasing the counter after reinit success. Cc: Jiri Slaby <jslaby@suse.com> Link: lkml.kernel.org/r/<20180829022353.23568-2-dima@arista.com> Suggested-by:
Jiri Slaby <jslaby@suse.com> Reviewed-by:
Jiri Slaby <jslaby@suse.cz> Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Safonov authored
commit 83d817f4 upstream. tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup() nor set_ldisc() nor tty_ldisc_release() as they use tty lock. But it races with anyone who expects line discipline to be the same after hoding read semaphore in tty_ldisc_ref(). We've seen the following crash on v4.9.108 stable: BUG: unable to handle kernel paging request at 0000000000002260 IP: [..] n_tty_receive_buf_common+0x5f/0x86d Workqueue: events_unbound flush_to_ldisc Call Trace: [..] n_tty_receive_buf2 [..] tty_ldisc_receive_buf [..] flush_to_ldisc [..] process_one_work [..] worker_thread [..] kthread [..] ret_from_fork tty_ldisc_reinit() should be called with ldisc_sem hold for writing, which will protect any reader against line discipline changes. Cc: Jiri Slaby <jslaby@suse.com> Cc: stable@vger.kernel.org # b027e229 ("tty: fix data race between tty_init_dev and flush of buf") Reviewed-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Tycho Andersen <tycho@tycho.ws> Signed-off-by:
-
Dmitry Safonov authored
commit 231f8fd0 upstream. ldsem_down_read() will sleep if there is pending writer in the queue. If the writer times out, readers in the queue should be woken up, otherwise they may miss a chance to acquire the semaphore until the last active reader will do ldsem_up_read(). There was a couple of reports where there was one active reader and other readers soft locked up: Showing all locks held in the system: 2 locks held by khungtaskd/17: #0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1 #1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3 2 locks held by askfirst/123: #0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58 #1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4 Prevent readers wait for active readers to release ldisc semaphore. Link: lkml.kernel.org/r/20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com Link: lkml.kernel.org/r/20180907045041.GF1110@shao2-debian Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
- 16 Jan, 2019 28 commits
-
-
Greg Kroah-Hartman authored
-
Christoffer Dall authored
commit fb544d1c upstream. We recently addressed a VMID generation race by introducing a read/write lock around accesses and updates to the vmid generation values. However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but does so without taking the read lock. As far as I can tell, this can lead to the same kind of race: VM 0, VCPU 0 VM 0, VCPU 1 ------------ ------------ update_vttbr (vmid 254) update_vttbr (vmid 1) // roll over read_lock(kvm_vmid_lock); force_vm_exit() local_irq_disable need_new_vmid_gen == false //because vmid gen matches enter_guest (vmid 254) kvm_arch.vttbr = <PGD>:<VMID 1> read_unlock(kvm_vmid_lock); enter_guest (vmid 1) Which results in running two VCPUs in the same VM with different VMIDs and (even worse) other VCPUs from other VMs could now allocate clashing VMID 254 from the new generation as long as VCPU 0 is not exiting. Attempt to solve this by making sure vttbr is updated before another CPU can observe the updated VMID generation. Cc: stable@vger.kernel.org Fixes: f0cf47d9 "KVM: arm/arm64: Close VMID generation race" Reviewed-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Vasily Averin authored
commit d4b09acf upstream. if node have NFSv41+ mounts inside several net namespaces it can lead to use-after-free in svc_process_common() svc_process_common() /* Setup reply header */ rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE svc_process_common() can use incorrect rqstp->rq_xprt, its caller function bc_svc_process() takes it from serv->sv_bc_xprt. The problem is that serv is global structure but sv_bc_xprt is assigned per-netnamespace. According to Trond, the whole "let's set up rqstp->rq_xprt for the back channel" is nothing but a giant hack in order to work around the fact that svc_process_common() uses it to find the xpt_ops, and perform a couple of (meaningless for the back channel) tests of xpt_flags. All we really need in svc_process_common() is to be able to run rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr() Bruce J Fields points that this xpo_prep_reply_hdr() call is an awfully roundabout way just to do "svc_putnl(resv, 0);" in the tcp case. This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(), now it calls svc_process_common() with rqstp->rq_xprt = NULL. To adjust reply header svc_process_common() just check rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case. To handle rqstp->rq_xprt = NULL case in functions called from svc_process_common() patch intruduces net namespace pointer svc_rqst->rq_bc_net and adjust SVC_NET() definition. Some other function was also adopted to properly handle described case. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Cc: stable@vger.kernel.org Fixes: 23c20ecd ("NFS: callback up - users counting cleanup") Signed-off-by:
J. Bruce Fields <bfields@redhat.com> v2: - added lost extern svc_tcp_prep_reply_hdr() - dropped trace_svc_process() changes Signed-off-by:
-
Theodore Ts'o authored
commit 95cb6713 upstream. We already using mapping_set_error() in fs/ext4/page_io.c, so all we need to do is to use file_check_and_advance_wb_err() when handling fsync() requests in ext4_sync_file(). Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit ad211f3e upstream. In no-journal mode, we previously used __generic_file_fsync() in no-journal mode. This triggers a lockdep warning, and in addition, it's not safe to depend on the inode writeback mechanism in the case ext4. We can solve both problems by calling ext4_write_inode() directly. Signed-off-by:
-
Theodore Ts'o authored
commit e8680786 upstream. The xfstests generic/475 test switches the underlying device with dm-error while running a stress test. This results in a large number of file system errors, and since we can't lock the buffer head when marking the superblock dirty in the ext4_grp_locked_error() case, it's possible the superblock to be !buffer_uptodate() without buffer_write_io_error() being true. We need to set buffer_uptodate() before we call mark_buffer_dirty() or this will trigger a WARN_ON. It's safe to do this since the superblock must have been properly read into memory or the mount would have been successful. So if buffer_uptodate() is not set, we can safely assume that this happened due to a failed attempt to write the superblock. Signed-off-by:
-
Theodore Ts'o authored
commit 2b08b1f1 upstream. The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent() while still holding the xattr semaphore. This is not necessary and it triggers a circular lockdep warning. This is because fiemap_fill_next_extent() could trigger a page fault when it writes into page which triggers a page fault. If that page is mmaped from the inline file in question, this could very well result in a deadlock. This problem can be reproduced using generic/519 with a file system configuration which has the inline_data feature enabled. Signed-off-by:
-
Theodore Ts'o authored
commit 812c0cab upstream. There are enough credits reserved for most dioread_nolock writes; however, if the extent tree is sufficiently deep, and/or quota is enabled, the code was not allowing for all eventualities when reserving journal credits for the unwritten extent conversion. This problem can be seen using xfstests ext4/034: WARNING: CPU: 1 PID: 257 at fs/ext4/ext4_jbd2.c:271 __ext4_handle_dirty_metadata+0x10c/0x180 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work RIP: 0010:__ext4_handle_dirty_metadata+0x10c/0x180 ... EXT4-fs: ext4_free_blocks:4938: aborting transaction: error 28 in __ext4_handle_dirty_metadata EXT4: jbd2_journal_dirty_metadata failed: handle type 11 started at line 4921, credits 4/0, errcode -28 EXT4-fs error (device dm-1) in ext4_free_blocks:4950: error 28 Signed-off-by:
-
Ilya Dryomov authored
commit 85f5a4d6 upstream. There is a window between when RBD_DEV_FLAG_REMOVING is set and when the device is removed from rbd_dev_list. During this window, we set "already" and return 0. Returning 0 from write(2) can confuse userspace tools because 0 indicates that nothing was written. In particular, "rbd unmap" will retry the write multiple times a second: 10:28:05.463299 write(4, "0", 1) = 0 10:28:05.463509 write(4, "0", 1) = 0 10:28:05.463720 write(4, "0", 1) = 0 10:28:05.463942 write(4, "0", 1) = 0 10:28:05.464155 write(4, "0", 1) = 0 Cc: stable@vger.kernel.org Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Tested-by:
Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by:
-
Ivan Mironov authored
commit 62d85b3b upstream. SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c481 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nesReported-by:
saahriktu <mail@saahriktu.org> Suggested-by:
Ivan Mironov <mironov.ivan@gmail.com> [danvet: Delete misleading comment.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.comSigned-off-by:
-
Yi Zeng authored
commit 6ebec961 upstream. If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by:
Yi Zeng <yizeng@asrmicro.com> [wsa: minor grammar updates to commit message] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Hans de Goede authored
commit 2b531d71 upstream. The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hans de Goede authored
commit 7d7b467c upstream. Some ACPI tables contain duplicate power resource references like this: Name (_PR0, Package (0x04) // _PR0: Power Resources for D0 { P28P, P18P, P18P, CLK4 }) This causes a WARN_ON in sysfs_add_link_to_group() because we end up adding a link to the same acpi_device twice: sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1 Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016 Call Trace: dump_stack+0x5c/0x80 sysfs_warn_dup.cold.3+0x17/0x2a sysfs_do_create_link_sd.isra.2+0xa9/0xb0 sysfs_add_link_to_group+0x30/0x50 acpi_power_expose_list+0x74/0xa0 acpi_power_add_remove_device+0x50/0xa0 acpi_add_single_object+0x26b/0x5f0 acpi_bus_check_add+0xc4/0x250 ... To address this issue, make acpi_extract_power_resources() check for duplicates and simply skip them when found. Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Michal Hocko authored
commit 63f3655f upstream. Liu Bo has experienced a deadlock between memcg (legacy) reclaim and the ext4 writeback task1: wait_on_page_bit+0x82/0xa0 shrink_page_list+0x907/0x960 shrink_inactive_list+0x2c7/0x680 shrink_node_memcg+0x404/0x830 shrink_node+0xd8/0x300 do_try_to_free_pages+0x10d/0x330 try_to_free_mem_cgroup_pages+0xd5/0x1b0 try_charge+0x14d/0x720 memcg_kmem_charge_memcg+0x3c/0xa0 memcg_kmem_charge+0x7e/0xd0 __alloc_pages_nodemask+0x178/0x260 alloc_pages_current+0x95/0x140 pte_alloc_one+0x17/0x40 __pte_alloc+0x1e/0x110 alloc_set_pte+0x5fe/0xc20 do_fault+0x103/0x970 handle_mm_fault+0x61e/0xd10 __do_page_fault+0x252/0x4d0 do_page_fault+0x30/0x80 page_fault+0x28/0x30 task2: __lock_page+0x86/0xa0 mpage_prepare_extent_to_map+0x2e7/0x310 [ext4] ext4_writepages+0x479/0xd60 do_writepages+0x1e/0x30 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x272/0x600 __writeback_inodes_wb+0x92/0xc0 wb_writeback+0x268/0x300 wb_workfn+0xb4/0x390 process_one_work+0x189/0x420 worker_thread+0x4e/0x4b0 kthread+0xe6/0x100 ret_from_fork+0x41/0x50 He adds "task1 is waiting for the PageWriteback bit of the page that task2 has collected in mpd->io_submit->io_bio, and tasks2 is waiting for the LOCKED bit the page which tasks1 has locked" More precisely task1 is handling a page fault and it has a page locked while it charges a new page table to a memcg. That in turn hits a memory limit reclaim and the memcg reclaim for legacy controller is waiting on the writeback but that is never going to finish because the writeback itself is waiting for the page locked in the #PF path. So this is essentially ABBA deadlock: lock_page(A) SetPageWriteback(A) unlock_page(A) lock_page(B) lock_page(B) pte_alloc_pne shrink_page_list wait_on_page_writeback(A) SetPageWriteback(B) unlock_page(B) # flush A, B to clear the writeback This accumulating of more pages to flush is used by several filesystems to generate a more optimal IO patterns. Waiting for the writeback in legacy memcg controller is a workaround for pre-mature OOM killer invocations because there is no dirty IO throttling available for the controller. There is no easy way around that unfortunately. Therefore fix this specific issue by pre-allocating the page table outside of the page lock. We have that handy infrastructure for that already so simply reuse the fault-around pattern which already does this. There are probably other hidden __GFP_ACCOUNT | GFP_KERNEL allocations from under a fs page locked but they should be really rare. I am not aware of a better solution unfortunately. [akpm@linux-foundation.org: fix mm/memory.c:__do_fault()] [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: enhance comment, per Johannes] Link: http://lkml.kernel.org/r/20181214084948.GA5624@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181213092221.27270-1-mhocko@kernel.org Fixes: c3b94f44 ("memcg: further prevent OOM with too many dirty pages") Signed-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Liu Bo <bo.liu@linux.alibaba.com> Debugged-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Stancek authored
commit 8ab88c71 upstream. LTP proc01 testcase has been observed to rarely trigger crashes on arm64: page_mapped+0x78/0xb4 stable_page_flags+0x27c/0x338 kpageflags_read+0xfc/0x164 proc_reg_read+0x7c/0xb8 __vfs_read+0x58/0x178 vfs_read+0x90/0x14c SyS_read+0x60/0xc0 The issue is that page_mapped() assumes that if compound page is not huge, then it must be THP. But if this is 'normal' compound page (COMPOUND_PAGE_DTOR), then following loop can keep running (for HPAGE_PMD_NR iterations) until it tries to read from memory that isn't mapped and triggers a panic: for (i = 0; i < hpage_nr_pages(page); i++) { if (atomic_read(&page[i]._mapcount) >= 0) return true; } I could replicate this on x86 (v4.20-rc4-98-g60b54823) only with a custom kernel module [1] which: - allocates compound page (PAGEC) of order 1 - allocates 2 normal pages (COPY), which are initialized to 0xff (to satisfy _mapcount >= 0) - 2 PAGEC page structs are copied to address of first COPY page - second page of COPY is marked as not present - call to page_mapped(COPY) now triggers fault on access to 2nd COPY page at offset 0x30 (_mapcount) [1] https://github.com/jstancek/reproducers/blob/master/kernel/page_mapped_crash/repro.c Fix the loop to iterate for "1 << compound_order" pages. Kirrill said "IIRC, sound subsystem can producuce custom mapped compound pages". Link: http://lkml.kernel.org/r/c440d69879e34209feba21e12d236d06bc0a25db.1543577156.git.jstancek@redhat.com Fixes: e1534ae9 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") Signed-off-by:
Jan Stancek <jstancek@redhat.com> Debugged-by:
Laszlo Ersek <lersek@redhat.com> Suggested-by:
"Kirill A. Shutemov" <kirill@shutemov.name> Acked-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Christoph Lameter authored
commit 09c2e76e upstream. Callers of __alloc_alien() check for NULL. We must do the same check in __alloc_alien_cache to avoid NULL pointer dereferences on allocation failures. Link: http://lkml.kernel.org/r/010001680f42f192-82b4e12e-1565-4ee0-ae1f-1e98974906aa-000000@email.amazonses.com Fixes: 49dfc304 ("slab: use the lock on alien_cache, instead of the lock on array_cache") Fixes: c8522a3a ("Slab: introduce alloc_alien") Signed-off-by:
Christoph Lameter <cl@linux.com> Reported-by: syzbot+d6ed4ec679652b4fd4e4@syzkaller.appspotmail.com Reviewed-by:
-
Jack Stocker authored
commit 3483254b upstream. To match the Corsair Strafe RGB, the Corsair K70 RGB also requires USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues discussed here: https://github.com/ckb-next/ckb-next/issues/42. Otherwise roughly 1 in 10 boots the keyboard will fail to be detected. Patch that applied delay control quirk for Corsair Strafe RGB: cb88a058 ("usb: quirks: add control message delay for 1b1c:1b20") Previous K70 RGB patch to add delay-init quirk: 7a1646d9 ("Add delay-init quirk for Corsair K70 RGB keyboards") Signed-off-by:
Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Icenowy Zheng authored
commit 0a99cc4b upstream. The SMI SM3350 USB-UFS bridge controller cannot handle long sense request correctly and will make the chip refuse to do read/write when requested long sense. Add a bad sense quirk for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Cc: stable <stable@vger.kernel.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Icenowy Zheng authored
commit c5603d2f upstream. Currently the code will set US_FL_SANE_SENSE flag unconditionally if device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to prevent this behavior, because SMI SM3350 UFS-USB bridge controller, which claims SPC4, will show strange behavior with 96-byte sense (put the chip into a wrong state that cannot read/write anything). Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on SPC4+ devices. Signed-off-by:
-
Daniele Palmas authored
commit 34aabf91 upstream. Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ross Lagerwall authored
commit b9a74cde upstream. If maxBuf is small but non-zero, it could result in a zero sized lock element array which we would then try and access OOB. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit ee13919c upstream. Currently we hide EINTR code returned from sock_sendmsg() and return 0 instead. This makes a caller think that we successfully completed the network operation which is not true. Fix this by properly returning EINTR to callers. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit b983f7e9 upstream. Currently for MTU requests we allocate maximum possible credits in advance and then adjust them according to the request size. While we were adjusting the number of credits belonging to the server, we were skipping adjustment of credits belonging to the request. This patch fixes it by setting request credits to CreditCharge field value of SMB2 packet header. Also ask 1 credit more for async read and write operations to increase parallelism and match the behavior of other operations. Signed-off-by:
-
Kailang Yang authored
commit d1dd4211 upstream. Disable Headset Mic VREF for headset mode of ALC225. This will be controlled by coef bits of headset mode functions. [ Fixed a compile warning and code simplification -- tiwai ] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit 4d4b0c52 upstream. Forgot to add unplug function to unplug state of headset mode for ALC225. Signed-off-by:
-
Kailang Yang authored
commit c2a7c55a upstream. Dell has new platform for ALC274. This will support to enable headset mode. Signed-off-by:
-
WANG Chao authored
commit e4f35891 upstream. Commit 4cd24de3 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by:
WANG Chao <chao.wang@ucloud.cn> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable <stable@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cnSigned-off-by:
-
Rik van Riel authored
commit f775b13e upstream. Currently, every time a VCPU is scheduled out, the host kernel will first save the guest FPU/xstate context, then load the qemu userspace FPU context, only to then immediately save the qemu userspace FPU context back to memory. When scheduling in a VCPU, the same extraneous FPU loads and saves are done. This could be avoided by moving from a model where the guest FPU is loaded and stored with preemption disabled, to a model where the qemu userspace FPU is swapped out for the guest FPU context for the duration of the KVM_RUN ioctl. This is done under the VCPU mutex, which is also taken when other tasks inspect the VCPU FPU context, so the code should already be safe for this change. That should come as no surprise, given that s390 already has this optimization. This can fix a bug where KVM calls get_user_pages while owning the FPU, and the file system ends up requesting the FPU again: [258270.527947] __warn+0xcb/0xf0 [258270.527948] warn_slowpath_null+0x1d/0x20 [258270.527951] kernel_fpu_disable+0x3f/0x50 [258270.527953] __kernel_fpu_begin+0x49/0x100 [258270.527955] kernel_fpu_begin+0xe/0x10 [258270.527958] crc32c_pcl_intel_update+0x84/0xb0 [258270.527961] crypto_shash_update+0x3f/0x110 [258270.527968] crc32c+0x63/0x8a [libcrc32c] [258270.527975] dm_bm_checksum+0x1b/0x20 [dm_persistent_data] [258270.527978] node_prepare_for_write+0x44/0x70 [dm_persistent_data] [258270.527985] dm_block_manager_write_callback+0x41/0x50 [dm_persistent_data] [258270.527988] submit_io+0x170/0x1b0 [dm_bufio] [258270.527992] __write_dirty_buffer+0x89/0x90 [dm_bufio] [258270.527994] __make_buffer_clean+0x4f/0x80 [dm_bufio] [258270.527996] __try_evict_buffer+0x42/0x60 [dm_bufio] [258270.527998] dm_bufio_shrink_scan+0xc0/0x130 [dm_bufio] [258270.528002] shrink_slab.part.40+0x1f5/0x420 [258270.528004] shrink_node+0x22c/0x320 [258270.528006] do_try_to_free_pages+0xf5/0x330 [258270.528008] try_to_free_pages+0xe9/0x190 [258270.528009] __alloc_pages_slowpath+0x40f/0xba0 [258270.528011] __alloc_pages_nodemask+0x209/0x260 [258270.528014] alloc_pages_vma+0x1f1/0x250 [258270.528017] do_huge_pmd_anonymous_page+0x123/0x660 [258270.528021] handle_mm_fault+0xfd3/0x1330 [258270.528025] __get_user_pages+0x113/0x640 [258270.528027] get_user_pages+0x4f/0x60 [258270.528063] __gfn_to_pfn_memslot+0x120/0x3f0 [kvm] [258270.528108] try_async_pf+0x66/0x230 [kvm] [258270.528135] tdp_page_fault+0x130/0x280 [kvm] [258270.528149] kvm_mmu_page_fault+0x60/0x120 [kvm] [258270.528158] handle_ept_violation+0x91/0x170 [kvm_intel] [258270.528162] vmx_handle_exit+0x1ca/0x1400 [kvm_intel] No performance changes were detected in quick ping-pong tests on my 4 socket system, which is expected since an FPU+xstate load is on the order of 0.1us, while ping-ponging between CPUs is on the order of 20us, and somewhat noisy. Cc: stable@vger.kernel.org Signed-off-by:
Rik van Riel <riel@redhat.com> Suggested-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [Fixed a bug where reset_vcpu called put_fpu without preceding load_fpu, which happened inside from KVM_CREATE_VCPU ioctl. - Radim] Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
- 13 Jan, 2019 9 commits
-
-
Greg Kroah-Hartman authored
-
Jiri Slaby authored
commit 75539616 upstream. Commit 7ed1c190 (tools: fix cross-compile var clobbering) removed setting of LD to $(CROSS_COMPILE)gcc. This broke build of acpica (acpidump) in power/acpi: ld: unrecognized option '-D_LINUX' The tools pass CFLAGS to the linker (incl. -D_LINUX), so revert this particular change and let LD be $(CC) again. Note that the old behaviour was a bit different, it used $(CROSS_COMPILE)gcc which was eliminated by the commit 7ed1c190. We use $(CC) for that reason. Fixes: 7ed1c190 (tools: fix cross-compile var clobbering) Signed-off-by:
-
Ivan Mironov authored
commit 38355a5f upstream. This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f05230 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Boris Brezillon authored
commit 2b02a05b upstream. When vc4_plane_state is duplicated ->is_yuv is left assigned to its previous value, and we never set it back to false when switching to a non-YUV format. Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch of the vc4_plane_setup_clipping_and_scaling() function. Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.comSigned-off-by:
-
Christophe Leroy authored
commit 10fdf838 upstream. On several arches, virt_to_phys() is in io.h Build fails without it: CC lib/test_debug_virtual.o lib/test_debug_virtual.c: In function 'test_debug_virtual_init': lib/test_debug_virtual.c:26:7: error: implicit declaration of function 'virt_to_phys' [-Werror=implicit-function-declaration] pa = virt_to_phys(va); ^ Fixes: e4dace36 ("lib: add test module for CONFIG_DEBUG_VIRTUAL") CC: stable@vger.kernel.org Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Lubomir Rintel authored
commit ed54ffbe upstream. According to [1] and [2], the temperature values are in tenths of degree Celsius. Exposing the Celsius value makes the battery appear on fire: $ upower -i /org/freedesktop/UPower/devices/battery_olpc_battery ... temperature: 236.9 degrees C Tested on OLPC XO-1 and OLPC XO-1.75 laptops. [1] include/linux/power_supply.h [2] Documentation/power/power_supply_class.txt Fixes: fb972873 ("[BATTERY] One Laptop Per Child power/battery driver") Cc: stable@vger.kernel.org Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Alexander Shishkin authored
commit ec5b5ad6 upstream. The 'nr_pages' attribute of the 'msc' subdevices parses a comma-separated list of window sizes, passed from userspace. However, there is a bug in the string parsing logic wherein it doesn't exclude the comma character from the range of characters as it consumes them. This leads to an out-of-bounds access given a sufficiently long list. For example: > # echo 8,8,8,8 > /sys/bus/intel_th/devices/0-msc0/nr_pages > ================================================================== > BUG: KASAN: slab-out-of-bounds in memchr+0x1e/0x40 > Read of size 1 at addr ffff8803ffcebcd1 by task sh/825 > > CPU: 3 PID: 825 Comm: npktest.sh Tainted: G W 4.20.0-rc1+ > Call Trace: > dump_stack+0x7c/0xc0 > print_address_description+0x6c/0x23c > ? memchr+0x1e/0x40 > kasan_report.cold.5+0x241/0x308 > memchr+0x1e/0x40 > nr_pages_store+0x203/0xd00 [intel_th_msu] Fix this by accounting for the comma character. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: ba82664c ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
-
Christian Borntraeger authored
commit fdd66968 upstream. Calling the test program genwqe_cksum with the default buffer size of 2MB triggers the following kernel warning on s390: WARNING: CPU: 30 PID: 9311 at mm/page_alloc.c:3189 __alloc_pages_nodemask+0x45c/0xbe0 CPU: 30 PID: 9311 Comm: genwqe_cksum Kdump: loaded Not tainted 3.10.0-957.el7.s390x #1 task: 00000005e5d13980 ti: 00000005e7c6c000 task.ti: 00000005e7c6c000 Krnl PSW : 0704c00180000000 00000000002780ac (__alloc_pages_nodemask+0x45c/0xbe0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 00000000002932b8 0000000000b73d7c 0000000000000010 0000000000000009 0000000000000041 00000005e7c6f9b8 0000000000000001 00000000000080d0 0000000000000000 0000000000b70500 0000000000000001 0000000000000000 0000000000b70528 00000000007682c0 0000000000277df2 00000005e7c6f9a0 Krnl Code: 000000000027809e: de7195001000 ed 1280(114,%r9),0(%r1) 00000000002780a4: a774fead brc 7,277dfe #00000000002780a8: a7f40001 brc 15,2780aa >00000000002780ac: 92011000 mvi 0(%r1),1 00000000002780b0: a7f4fea7 brc 15,277dfe 00000000002780b4: 9101c6b6 tm 1718(%r12),1 00000000002780b8: a784ff3a brc 8,277f2c 00000000002780bc: a7f4fe2e brc 15,277d18 Call Trace: ([<0000000000277df2>] __alloc_pages_nodemask+0x1a2/0xbe0) [<000000000013afae>] s390_dma_alloc+0xfe/0x310 [<000003ff8065f362>] __genwqe_alloc_consistent+0xfa/0x148 [genwqe_card] [<000003ff80658f7a>] genwqe_mmap+0xca/0x248 [genwqe_card] [<00000000002b2712>] mmap_region+0x4e2/0x778 [<00000000002b2c54>] do_mmap+0x2ac/0x3e0 [<0000000000292d7e>] vm_mmap_pgoff+0xd6/0x118 [<00000000002b081c>] SyS_mmap_pgoff+0xdc/0x268 [<00000000002b0a34>] SyS_old_mmap+0x8c/0xb0 [<000000000074e518>] sysc_tracego+0x14/0x1e [<000003ffacf87dc6>] 0x3ffacf87dc6 turns out the check in __genwqe_alloc_consistent uses "> MAX_ORDER" while the mm code uses ">= MAX_ORDER". Fix genwqe. Cc: stable@vger.kernel.org Signed-off-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by:
-
Yan, Zheng authored
commit 3c1392d4 upstream. Updating mseq makes client think importer mds has accepted all prior cap messages and importer mds knows what caps client wants. Actually some cap messages may have been dropped because of mseq mismatch. If mseq is left untouched, importing cap's mds_wanted later will get reset by cap import message. Cc: stable@vger.kernel.org Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Signed-off-by:
-
